Message-ID: <[email protected]>
Path: senator-bedfellow.mit.edu!bloom-beacon.mit.edu!howland.erols.net!sunqbc.risq.qc.ca!torn!qcarhaaa.nortelnetworks.com!bcarh189.ca.nortel.com!zcarh46f.ca.nortel.com!ferret.ocunix.on.ca!not-for-mail
Date: 26 Nov 2001 06:00:02 GMT
Supersedes: <[email protected]>
Expires: 31 Dec 2001 06:00:01 GMT
References: <[email protected]>
Subject: UNIX Email Software Survey FAQ [Part 3 of 3]
From: [email protected] (Chris Lewis)
Newsgroups: news.admin.misc,comp.mail.misc,news.answers,comp.answers
Followup-To: poster
Reply-To: [email protected] (Mail FAQ commentary reception)
Summary: How to set up Email on UNIX systems.
Approved: [email protected]
Keywords: mail software survey UNIX FAQ
Organization: eh?
Lines: 657
Xref: senator-bedfellow.mit.edu news.admin.misc:78188 comp.mail.misc:62682 news.answers:219737 comp.answers:47911

Archive-name: mail/setup/unix/part3
Last-modified: Mon Feb 21 09:57:37 EST 2000

               UNIX EMail Software - a Survey
                      Chris Lewis
               [email protected]
               [and a host of others - thanks]

               Copyright 1991, 1992, 1993, Chris Lewis

               Redistribution for profit, or in altered content/format
               prohibited without permission of the author.
               Redistribution via printed book or CDROM expressly
               prohibited without consent of the author.  Any other
               redistribution must include this copyright notice and
               attribution.

Mailshield      Author: Lyris Technologies http://www.lyristechnologies.com

[Watch this space, see http://www.mailshield.com]

Exim*         Author: Philip Hazel ([email protected])

   [Author note: Exim is very highly regarded in the industry, and it,
   along with qmail, are the most frequently recommended replacements
   for sendmail on UNIX.]

   Exim is a mail transport agent (MTA) developed at the University
   of Cambridge for use on Unix systems connected to the Internet.
   It is freely available under the terms of the GNU General Public
   Licence. In style it is similar to Smail 3, but its facilities
   are more extensive, and in particular it has options for
   verifying incoming sender and recipient addresses, for refusing
   mail from specified hosts, networks, or senders, and for
   controlling mail relaying.

   Exim is intended for use as an Internet mailer, and therefore
   handles addresses in RFC 822 domain format only. It cannot handle
   'bang paths', though simple two-component bang paths can be
   converted by a straightforward rewriting configuration. However,
   there is no problem in interfacing Exim to UUCP systems, provided
   they use domain-style addressing.

   Exim is in production use at quite a few sites, some of which
   move hundreds of thousands of messages per day.

   The following operating systems are currently supported: AIX, BSDI, DGUX,
   FreeBSD, HI-OSF (Hitachi), HP-UX, IRIX, Linux, MIPS RISCOS, NetBSD,
   OpenBSD, DEC OSF1 (aka Digital UNIX), SCO, SCO SVR4.2 (aka UNIX-SV),
   SunOS4, SunOS5 (Solaris 2), Ultrix, and Unixware.

   Further information can be obtained from the Exim web sites:

   http://www.exim.org      (main site, in the UK)
   http://www.us.exim.org   (a mirror in the USA)

|qmail:      Author Daniel Bernstein <[email protected]>
|
|    [Ed note: Qmail, along with Exim, is the most often recommended
|    sendmail replacement.  Qmail is capable of handling very high mail
|    volumes. Qmail is one of the few mailers capable of integrating
|    spam filters directly, however, given how this is done, qmail probably
|    could not match the volumes of, say, Mailshield - which was designed
|    for the purpose of filtering spam from the beginning.]
|
|    Web page:   http://www.qmail.org
|       also:   ftp://koobera.math.uic.edu/www/qmail.html
|
|    Download:
|       ftp://koobera.math.uic.edu/pub/software/qmail-1.03.tar.gz
|       ftp://koobera.math.uic.edu/www/software/dot-forward-0.71.tar.gz
|       ftp://koobera.math.uic.edu/www/software/fastforward-0.51.tar.gz
|       ftp://koobera.math.uic.edu/www/software/ucspi-tcp-0.84.tar.gz
|
|    RPMs:       ftp://moni.msci.memphis.edu/pub/qmail
|
|    Lists:      mailto:[email protected]
|               mailto:[email protected]
|
|    qmail is an MTA for UNIX and UNIX-like systems (including FreeBSD,
|    Linux, SunOS, Solaris, HP/UX, AIX, amongst others).  It was written by
|    Dan Bernstein to overcome the limitations of and flaws in sendmail, and
|    to demonstrate by example that there are better ways of doing some
|    things (see Maildirs below).
|
|  * qmail is Modular
|
|    qmail follows the UNIX philosophy of combining small single-purpose
|    tools together.  Instead of being one enormous setuid-root binary,
|    qmail comprises a suite of small programs, each of which does one
|    particular job.  This makes qmail flexible, allowing substitutions
|    to be made for individual parts of the system according to one's
|    requirements.
|
|    Substituting qmail-qmqpc for qmail-queue, for example, turns qmail
|    into "mini-qmail" (see below).  For another example, all user
|    authentication in the POP3 server is done by calling a separate
|    external utility program, checkpassword, so changing the
|    authentication scheme merely involves replacing that program.
|
|    Even qmail's configuration is modular.  qmail doesn't have large
|    monolithic configuration files with complex structures, that have to
|    be read and parsed every time that a new mail process is created,
|    only to have 70% or more of that information remain unused because
|    it is irrelevant to the task at hand.  qmail's configuration
|    comprises individual files in /var/qmail/control, each file having a
|    single job.  The names of the local domains are listed, one per
|    line, in /var/qmail/control/locals, for example.  Many configuration
|    tasks (and FAQ answers!)  are, as a result of this philosophy,
|    one-liners involving `echo' and `cat'.
|
|  * qmail is Secure
|
|    qmail was designed to be secure.  Not only does the mail system not
|    trust the outside world, but different modules in the mail system
|    don't even trust one another.  Different parts of the mail system
|    run under different non-privileged UIDs ("qmaild", "qmailr",
|    "qmailq", &c.).  So, for example, even if the SMTP server
|    (qmail-smtpd, which runs as user "qmailr") were compromised, the
|    rest of the system will not be.
|
|    qmail has only one setuid binary, qmail-queue which is setuid to one
|    of the qmail user IDs, not root.  qmail has only two programs that
|    run as root, qmail-start which spawns the other daemon processes
|    under the correct UIDs and qmail-lspawn which spawns the local
|    delivery program qmail-local under the UID and GID of the user being
|    delivered to.  Neither program writes to any files or spawns any
|    program under the root user ID.
|
|    And, of course, qmail doesn't treat root as a "real" user, and so
|    never delivers mail as root.
|
|  * qmail provides a flexible aliasing/forwarding mechanism, qmail files
|    qmail supports /etc/aliases and .forward with its fastforward and
|    dot-forward packages.  However, it is a testament to the power and
|    versatility of qmail's own "native" aliasing and forwarding
|    mechanism that both are merely plug-ins that run off it.
|
|    With qmail, each user controls all local parts that begin with the
|    user's username, allowing each user to have an unlimited number of
|    different local parts.  Delivery to each local part is (optionally)
|    controlled by a separate .qmail-* file in the user's home directory


uumail:

   Uumail is a very old and obsolete precursor to smail 2.5.  Included
   here only because I know that uumail sites still exist.  You
   should not install uumail in new configurations, and existing
   uumail sites should convert to something more modern.

smail 2.5: author The UUCP Mapping Project

   [Not recommended for general use now.  UUCP is very little used.]

   Smail 2.5 is a small, simple and hard-coded rule MTA for use on
   UUCP networks.  It understands RFC compliant headers, will
   generate RFC compliant Internet-style headers, can
   use domains, aliases, a pathalias UUCP routing database, and
   is very simple to install.  For full functionality, you will
   also want pathalias and a map unpacker.  The one thing
   it cannot do by itself is mail-to-pipe and mail-to-file aliasing.
   For that, you need Zeeff's lmail, deliver or procmail.

   Smail 2.5 has the capability of coalescing addresses into single
   UUCP transfers, and knows how to query UUCP for the names
   of UUCP neighbors, and autoroute if necessary.

   Smail 2.5 has a few bugs that are (usually) pretty rarely seen
   in operation.  There have been a number of patches posted for it,
   but it is recommended that you do not apply them - some were
   ill-conceived, buggy in their own right, or conflicting with others.
   The only patches that I feel safe in recommending is Chip
   Salzenberg's patches for use with Xenix MICNET - which are
   unnecessary unless you are in the unfortunate position of having
   to actually *use* MICNET.  Chip Salzenberg's "deliver" package
   (see below) combined with "smail-deliver.pch" from comp.sources.unix,
   volume 25 issue 107, makes the MICNET modifications to smail
   itself unnecessary.

   In particular, do not apply the "mail-to-pipe/file" patches that
   float around for smail 2.5.  These are a major security hole.

   Smail 2.5 can also be used with sendmail as a UUCP router.

   Smail 2.5 was posted in comp.sources.unix in 1987, volume 11
   with archive name "smail3" (but it isn't the same thing as
   smail 3 below).

lmail: Author Jon Zeeff <[email protected], [email protected]>

   When you install smail 2.5, you link the original /bin/mail (binmail
   above) to /bin/lmail to perform the task of actually delivering the
   mail to the user's mailbox (LDA).

   Since smail 2.5 was not capable of doing mail-to-pipe and mail-to-file
   aliasing, Jon Zeeff wrote a replacement lmail that implemented
   these (along with user mailbox delivery).

   Jon's program is okay for casual use, but has some pretty serious
   bugs.  Fixed versions are available, but you're probably better
   off installing deliver or procmail.

smail 3: Author Ronald S. Karr* <[email protected]> and Landon Curt Noll.

   Smail3.x is a domain-capable mail router and delivery program that
   works in the UUCP zone and on the Internet and that is capable of
   gatewaying between the two.  It was written primarily by me (Ronald
   S.  Karr) and Landon Curt Noll, with the blessings of the original
   Smail1 and Smail2 authors.

   Smail3 supports SMTP, UUCP mail, alias files, .forward files, mailing
   list directories, pathalias files, /etc/hosts files, the domain name
   system, and can also query uucp for neighboring sites, automatically.
   It also supports use of encapsulated SMTP commands for delivery over
   UUCP connections, which allows batching of multiple messages into a
   single UUCP transaction, and allows many addresses to be passed with a
   single message transfer, which can greatly decrease the traffic
   generated for large mailing lists.  It is also very simple to configure
   with a reasonable certainty of correctness.

   Smail3 includes pathalias and a reliable map unpacker.

   Rather than using configuration files to resolve addresses based on
   their syntax, ala sendmail, Smail3 uses a database metaphore for
   resolving addresses based on their contents.  The set of methods that
   Smail3 uses for resolving local addresses and hosts is configurable and
   extensible.  Smail3's methods for parsing addresses are not
   configurable.  It is the opinion of the authors that addressing on the
   Internet and in the UUCP zone has become sufficiently standardized that
   attempts to allow configurability in this area are now a hindrance to
   the correct working of the network.

   Questions related to Smail3 are usually discussed in comp.mail.smail.
   There are also two discussion mailing lists.  To join the mailing
   lists, send mail to:

       [email protected]

   The current release of Smail3 is 3.3.x, and can be found on uunet,
   in the directory /archive/networking/mail/smail/smail-3.1.29.1.tar.Z.

   Smail 3 is covered under the GPL (if it matters)

sendmail: Original author Eric Allman

   Sendmail is the granddaddy of all intelligent MTA's.  It can do just
   about anything.  It's main problem is that it can do just about
   anything.  Modification of sendmail's configuration tables (which is
   necessary with most vendor-supplied versions) is NOT for novices.
   The language of the sendmail.cf is cryptic, but that isn't really
   the problem.  The problem is that it's extremely difficult
   to know when the rules you are implementing are the right thing--
   many sendmail configurations do slightly buggy, or even extremely
   buggy, or illegal things.  Default configurations and minimal changing
   is the approach to take.  The Sendmail 8.9 configuration  environment
   is recommended.

   Worse, every vendor's version of sendmail is different, and many
   of their sendmail.cf's don't work at all.  HPUX is one example
   of where the sendmail.cf is actually pretty sane.  HP is to
   be congratulated.  On the other hand, some vendors, who shall
   remain nameless, can't even get their sendmail to deliver to local
   users, let alone get their sendmail to speak SMTP on a LAN.

   The major problem with sendmail is that it tries to do too many
   things.  Rather than confining itself to handling local mail, and
   simply routing external mail and leaving transport-specific
   format/standards conversions to transport software, it attempts
   (nay virually *insists*) that you have to do all of the
   format/standards conversions for different transports all at once.
   Which results in configuration files that are veritable nightmares
   to maintain.  And that many sendmail.cf files depend on out-of-date
   standards for different transports, rather than trying to unify
   them (as in RFC976).

   Indeed, while common wisdom and practice mandates that MTAs don't
   rewrite headers, sendmail makes it extremely difficult to *not*
   rewrite headers.  Which results in many major systems attempting to
   "be nice", yet, totally scramble return addresses and the like.

   There are several different sendmail lineages in the world but they
   seem to be coming together now with Eric Allman's work creating
   sendmail V8.x.  Sendmail V8.1 was shipped with BSD 4.4 UNIX.

   It is strongly recommended that anyone contemplating running sendmail
   upgrade to at least 8.9.x (see www.sendmail.org), which has a number
   of serious security problems fixed, or at least configurable w.r.t.
   email spam.  Ie: anti-relay, HELO overflow etc.

   Another point to remember is that sendmail, historically, has been
   where a large number of severe security holes have been found.  From
   the infamous RTM Internet Worm, to the latest ones "CERT"d in
   witthin the past few months.  Indeed, if your application is
   security-critical, I recommend that you should *not* use sendmail on
   your security-critical systems, such as your firewalls.

   Unless your vendor has provided sendmail 8.9 or better, do not expose
   it to the Internet.  In particular, SunOS and up to recent Solaris are
   extremely susceptable to abuse, _are_ being abused, and cannot be fixed
   without upgrading.  The latest Solaris sendmail patch resolves these
   problems.

   Administrators wishing something easier to configure than sendmail,
   particularly with the addition of filtering rules, are best advised
   to consider using qmail, exim instead, or, using mailshield SMTP
   relaying to stand in "front" of sendmail.

   Theoretically, all of these problems have been removed from sendmail
   8.6.5 (now 8.9) or later, but, there's bound to be more found.  While
   some of this can be due to the much larger installed base of sendmail,
   other mailers with improved function partitioning (such as the
   channel-oriented MMDF or PP) will usually be inherently more secure.

   I am being harsh on sendmail - sendmail programming is, after all, a
   good source of revenue for consultants ;-) But, if you obtain a good
   sendmail 8.9.x, or are willing to spend the time to learn it,
   sendmail will do what you want.  Well.  Don't, however, even think
   of playing with the configuration files without a copy of the
   Sendmail book by Costales, Allman and Rickert mentioned in the book
   list above.  It is *absolutely* essential.

   Sendmail is discussed in comp.mail.sendmail.


ZMailer: Original author  Rayan Zachariassen* <[email protected]>
        Current author   Matti Aarnio <[email protected]>

   ZMailer is intended for gateways or mail servers or other large site
   environments that have extreme demands on the abilities of the mailer.

   Code and Design features:

   + Strong limits on host impact.
   + Secure design (and hopefully implementation).
   + Natural fit for client/server environments.
   + Extremely customizable configuration mechanism.
   + Flexible database interface with support for: sorted files, unsorted
     files, dbm, ndbm, gdbm, nis (yellow pages), dns (BIND resolver),
     /etc/hosts file, and in-core data.
   + Efficient message queue management.
   + Fast binary-transparent SMTP server and client.
   + MIME-facilities for message transport.
   + Low-technology implementation, with high-tech options for performance.

   Default configuration file features:

   + Default configuration will work for most sites.
   + Network protocol support for: smtp, uucp, bitnet, mail to news.
   + An easy way of overriding any external routing information.
   + Automatic handling of mailing lists.

   It is available by anonymous FTP from:
       ftp://ftp.funet.fi/pub/unix/mail/zmailer/   (Mr. Aarnio's versions)
   Alternate (some of them old) versions:
       ftp://ftp.cs.toronto.edu/pub/edwin/zmailer2.2.e4.tar.Z
       ftp://ftp.cs.toronto.edu/pub/zmailer.tar.Z

MMDF: [reviewed by [email protected], updated by Randall Atkinson
       2000/02/21]

   MMDF is a MTA. It works on the principle that you have communications
   channels, both incoming and outgoing, and it arranges for messages to
   pass between them.

   Strong points include:
       * Ability to turn up and down debugging level on the fly
       * Very strong on authentication, and permission checking.
       * Can block mail based on who it came from, how it got there,
         who it is going to.

   It is older than sendmail, simpler than sendmail, and it is a great
   pity that it was not shipped as standard instead of sendmail.

   [MMDF is standard on some systems - primarily SCO UNIX.]

   It has one major advantage to people in the UK, in that it knows how to
   handle mail addresses in our 'correct' format (Most significant part first,
   e.g. net.uu.uunet), as well as the thing the rest of the world uses :-) :-)

|    A mailing list for MMDF discussion is at [email protected]
|    requests for addition to the list to [email protected].
|
|    MMDF is being maintained at the University Kaisers-Lauten in
|    Germany:
|
|    http://www.mathematik.uni-kl.de/ftp/pub/Sources/mail+news/mmdf and
|    ftp://www.mathematik.uni-kl.de/pub/Sources/mail+news/mmdf
|
|    The MMDF Users Group has a web site at http://www.mmdf.org

PP: Author University College London

   PP is a Message Transfer Agent, intended for high volume message
   switching, protocol conversion, and format conversion. It is targeted for
   use in an operational environment, but may also be useful for investigating
   Message related applications. Good management features are a major
   aspect of this system. PP supports the 1984 and 1988 versions of the
   CCITT X.400 / ISO 10021 services and protocols. Many existing RFC 822
   based protocols are supported, along with RFC 1148 conversion to X.400.
   PP is an appropriate replacement for MMDF or Sendmail, and also supports
   SMTP and UUCP mail.

   For more information contact: [email protected] or [email protected]
   The latest version is PP-6.0, which was posted in comp.sources.misc,
   volume 27.

   [Ed note:]
   PP is usually used in combination with the ISODE package, which
   also provides copious documentation for PP.  PP itself is
   "freeware", but ISODE and the PP documentation is not - site
   licenses are rather pricy.  PP is *very* large, and has quite a
   number of more esoteric functions, such as FAX transmission using
   the appropriate modems.  PP is ideal for large organizations with
   demanding email requirements (eg: 100s of machines and 1000s of
   users), where PP would be used as "backbone mail servers", and something
   simpler on the "client" computers.  It does have _substantial_
   learning and support requirements, and is *not* suitable for smaller
   installations.  It does, however, shine in large production environments,
   where policy-based routing, high levels of security, or extensive
   gatewaying to different transports is required.

SVR4 mail: Author AT&T (description written by Tony Hansen,
   [email protected])

   The System V Release 4 mail system is a domain-capable mail router and
   delivery program that works in the UUCP zone and on the Internet and
   that is capable of gatewaying between the two.

   SVR4 mail supports SMTP, UUCP mail, alias files, forwarding files,
   mailing list directories, /etc/hosts files, the domain name system, and
   can also query uucp for neighboring sites, automatically.  (System V
   Release 4.1 also allows batching of multiple messages into a single UUCP
   transaction, and allows many addresses to be passed with a single
   message transfer, which can greatly decrease the traffic generated for
   large mailing lists.)  It is also very simple to configure with a
   reasonable certainty of correctness.

   It also supports mail-to-pipe and mail-to-file.

   SVR4 mail uses configuration files to resolve addresses based on their
   syntax, somewhat similar to sendmail, but using regular expressions and
   a more easily understood syntax. The set of methods that SVR4 mail uses
   for resolving local and remote addresses and hosts is configurable and
   extensible.

   Questions related to SVR4 mail are usually discussed in comp.mail.misc.

   SVR4 mail is a standard part of System V Release 4; unfortunately, some
   vendors have not realized that SVR4 mail is not the same mailer as the
   SVR3 mail system, and have replaced it with other inferior mail systems.

deliver: Author Chip Salzenberg* <chip@fin!chip@dg_rtp.dg.com>

   Deliver allows any user to write a shell script that processes all
   incoming mail messages for that user.  The system administrator may
   also install scripts that process all messages by installing
   it as the Local Delivery Agent (lmail replacement).

   The output of a script is a list of mail addresses, files and programs
   that should receive the message.  It has access to each message as it
   is processed, so the action can be content dependent.  The script may
   also generate automatic replies, like the "vacation" program, or pass
   along a modified version of the original message.

   Deliver can be used to construct mail-based services (e.g. automatic
   mailing list maintenance).  It can also be used to filter mail
   automatically in prearranged ways (e.g. encryption and decryption,
   tossing junk mail, or vacation notices).

   Deliver was last posted in comp.sources.reviewed, volume 1.  The
   current version is 2.1.12.
   It can be retrieved from <ftp:ftp.cs.uni-sb.de/pub/mail/deliver>

procmail: Author Stephen R. van den Berg*
               <[email protected]>

   Can be used to create mail-servers, mailing lists, sort your incoming
   mail into separate folders/files (real convenient when subscribing to
   one or more mailing lists or for prioritising your mail), preprocess your
   mail, start any programs upon mail arrival (e.g. to generate different
   chimes on your workstation for different types of mail) or selectively
   forward certain incoming mail automatically to someone.

   Procmail can be used:
       - and installed by an unprivileged user (for himself only).
       - as a drop in replacement for the local delivery agent /bin/mail
         (with biff/comsat support).
       - as a general mailfilter for whole groups of messages (e.g. when
         called from within sendmail.cf rules).

   The accompanying formail program enables you to generate autoreplies,
   split up digests/mailboxes into the original messages, do some very
   simple header-munging/extraction, or force mail into mail-format (with
   leading From line).

   Also included is a comprehensive mailinglist/archive management system.

   Since procmail is written entirely in C, it poses a very low impact
   on your system's resources (under normal conditions, when you don't
   start other programs/scripts from within it).

   Procmail was designed to deliver the mail under the worst conditions
   (file system full, out of swap space, process table full, file table
   full, missing support files, unavailable executables; it all doesn't
   matter).  Should (in the unlikely event) procmail be unable to deliver
   your mail somewhere, the mail will bounce back to the sender or reenter
   the mailqueue (your choice).

   A recent version can be picked up at various comp.sources.misc archives.
   The latest version (3.03) can be obtained directly from the ftp-archive at:
       ftp.informatik.rwth-aachen.de (137.226.225.3)
       (g)zipped:          pub/packages/procmail/procmail.tar.gz       <160KB
       compressed:         pub/packages/procmail/procmail.tar.Z        <224KB

   [Ed note: I had noted reported difficulties in integrating procmail
   with System V and/or smail 2.5.  The 2.70 version of Procmail eliminated
   these difficulties.]

mailagent: Author Raphael Manfredi* <[email protected]>

   The mailagent is yet another mail filter, written in perl, which
   will let you do anything with your mail. It has all the features
   you may expect from a filter: mailing lists sorting, forwarding to
   MTA or to inews, pre-processing of message before saving into
   folder, vacation mode, etc... It was initially written as an
   ELM-filter replacement, but has now enough power to also supplant
   MMDF's .maildelivery. There is also a support for @SH mail hooks,
   which allows you to automatically distribute patches or software
   via command mails.

   The mailagent was designed to make mail filtering as easy as it can
   be. It is highly configurable and fairly complete. Rules are
   specified in a lex-like style, with the full power of perl's
   regular expressions. The automaton supports the notion of mode, and
   header selection has many magic features built-in, to ease the rule
   writing process.

   To give a simple example, the two following rules:

       Subject: /cron output/  { SAVE cron };
       To Cc: dist-users               { FORWARD [email protected]; LEAVE };

   would save in a folder 'cron' all cron-related mail, and forward
   mail from the dist-users mailing list to a friend, leaving a copy
   in the system mailbox for immediate processing...

   It supports delivery to plain UNIX folder, to MMDF-style folders or
   to MH folders with built-in unseen sequence updates, as specified
   in your ~/.mh_profile. It may therefore replace MH's slocal program
   as well.

   Mailagent can be dynamically extended (that's the advantage of
   having it written in perl) with new filtering commands that will
   behave exactly like built-in ones; this operation being done
   without changing a single source line in the program itself, of
   course. It also provides a generic mail server layer, where
   user-defined commands can be easily plugged in, mailagent taking
   care of the lower-level stuff.

   The distribution comes with a set of examples, an exhaustive test
   suite, and naturally a detailed manual page. It should be noted
   that the mailagent will work even if your system administrator
   forbids "| programs" hooks in the ~/.forward, provided you have
   access to some sort of cron daemon.

   The mailagent program is available from any comp.source.misc
   archive and thanks to Christophe Wolfhugel
   <[email protected]>, from ftp.univ-lyon1.fr
   (134.214.100.6) under /pub/unix/mail/tools, file
   mailagent-3.0.tar.gz

pathalias: Author Peter Honeyman

   [Not recommended anymore, due to the shift away from UUCP.  Included
   for historical interest, and the occasional use in very special
   situations.]

   Pathalias reads the UUCP Map Project maps (they need to be extracted
   from the postings first) and constructs a database containing the
   minimum cost route to any machine in the maps.  This database can
   then be used with any mailer that knows how to search the database
   (eg: smail 2.5, Zmailer?, and some versions of sendmail.  Smail 3
   comes bundled with pathalias).

   There were previous versions of this program.  You must use
   pathalias version 10 (latest version), because some map format
   changes have been made and only pathalias 10 can parse them.
   If your pathalias doesn't give a syntax error on:
       echo "file {foo}" | pathalias
   It's the new one.

   There were other route-generating programs, but all (as far as
   I know) are very obsolete, and none run as fast as pathalias
   (still, which can be rather hard on machines with smallish virtual
   memory or RAM capacities).

   pathalias 10 is available from comp.sources.unix archives,
   volume 22.  A patch was just released in comp.sources.unix
   (vol 25) that addresses an oddity when used with smail (not that
   I've ever noticed it).

uuhosts: Author John Quarterman

  [Not recommended anymore.  Included for historical interest.]

   The "defacto" standard UUCP Map Project map unpacker.  Includes
   a program to arbitrarily view individual map entries.  Uuhosts
   implements trojan horse/virus security by running under
   a "chroot()" system call.  Uuhosts does not appear to be
   actively maintained, and the last versions that I have inspected
   were unable to easily compress the maps (a full set of maps
   is >6000 blocks), had no provision for automatically
   running pathalias, and will not work with the newest version
   of cnews.  Further, uuhost's header checking is so picky
   that the slightest change in the map format will cause
   uuhosts to reject map updates.

   Use of uuhosts now will require some minor hacking - and this
   hacking will stretch your knowledge of Bourne shell programming.

   The last edition, "uuhost4" (version 1.69) appears to have
   been posted in comp.sources.unix in volume 3, 1986.

   Do not be confused by Jan-Piet Mons "uuhost 2.0" program posted
   in alt.sources.  This is not a map unpacker.  It is just
   a map viewer, and is a subset of the real uuhosts.

unpackmaps: Author Chris Lewis* <[email protected]>

   [Not recommended anymore, sniff ;-)]

   Unpackmaps is a superset of the functionality of uuhosts.
   It obtains its security by doing the map unpacking with
   a specialized parser that knows the map article format
   rather than invoking a shar/shell.  Compression and pathalias
   invocation is automatic, correctly takes into account
   the change date of local configuration files, and will
   work with the latest Cnews.

   The newest version of unpackmaps, version 4.1, has been
   released to comp.sources.misc, and appeared in volume 34.
   This version is entirely written in C, is considerably faster
   than unpackmaps 3 or uuhosts, has considerably more features,
   and will work with Brian Reids PostScript net maps too.

unshar: Author Lee Ward, modified by Mark Moraes* <[email protected]>

   unshar is evolved from getmaps by Lee Ward.  It is has a specialized
   and limited parser that understands most simple shar formats.  It is
   capable of automatically unpacking new files from a newsgroup spool
   directory, and requires no interaction whatsoever with the news
   system.  Apart from UUCP maps, it can be used to automatically and
   safely unpack shar files from the sources newsgroups.  It does not
   handle some of the newer, esoteric shar formats that do automatic
   uudecodes, etc.  Ftp'able from
   ftp.cs.toronto.edu:/pub/moraes/unshar.tar.gz.

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.