# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
       $(srcdir)/Makefile.in $(srcdir)/config.h.in \
       $(srcdir)/poppler-cairo.pc.in $(srcdir)/poppler-glib.pc.in \
       $(srcdir)/poppler-qt.pc.in $(srcdir)/poppler-qt4.pc.in \
       $(srcdir)/poppler-splash.pc.in $(srcdir)/poppler.pc.in \
       $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
       TODO config.guess config.sub depcomp install-sh ltmain.sh \
       missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
       $(top_srcdir)/m4/define-dir.m4 $(top_srcdir)/m4/gtk-doc.m4 \
       $(top_srcdir)/m4/libjpeg.m4 $(top_srcdir)/m4/libpng.m4 \
       $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
       $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
       $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/qt.m4 \
       $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
       $(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h $(top_builddir)/poppler/poppler-config.h
CONFIG_CLEAN_FILES = poppler.pc poppler-cairo.pc poppler-splash.pc \
       poppler-glib.pc poppler-qt.pc poppler-qt4.pc
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
       html-recursive info-recursive install-data-recursive \
       install-dvi-recursive install-exec-recursive \
       install-html-recursive install-info-recursive \
       install-pdf-recursive install-ps-recursive install-recursive \
       installcheck-recursive installdirs-recursive pdf-recursive \
       ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
   $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
   *) f=$$p;; \
 esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
 for p in $$list; do echo "$$p $$p"; done | \
 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
   if (++n[$$2] == $(am__install_max)) \
     { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
   END { for (dir in files) print dir, files[dir] }'
am__base_list = \
 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
       $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
       distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = goo fofi splash poppler utils glib qt test qt4
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
 { test ! -d "$(distdir)" \
   || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
        && rm -fr "$(distdir)"; }; }
am__relativize = \
 dir0=`pwd`; \
 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 sed_rest='s,^[^/]*/*,,'; \
 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 sed_butlast='s,/*[^/]*$$,,'; \
 while test -n "$$dir1"; do \
   first=`echo "$$dir1" | sed -e "$$sed_first"`; \
   if test "$$first" != "."; then \
     if test "$$first" = ".."; then \
       dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
       dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
     else \
       first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
       if test "$$first2" = "$$first"; then \
         dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
       else \
         dir2="../$$dir2"; \
       fi; \
       dir0="$$dir0"/"$$first"; \
     fi; \
   fi; \
   dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 done; \
 reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ABIWORD_CFLAGS = @ABIWORD_CFLAGS@
ABIWORD_LIBS = @ABIWORD_LIBS@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CAIRO_CFLAGS = @CAIRO_CFLAGS@
CAIRO_FEATURE = @CAIRO_FEATURE@
CAIRO_LIBS = @CAIRO_LIBS@
CAIRO_REQ = @CAIRO_REQ@
CAIRO_VERSION = @CAIRO_VERSION@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@
FONTCONFIG_LIBS = @FONTCONFIG_LIBS@
FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
FREETYPE_CONFIG = @FREETYPE_CONFIG@
FREETYPE_LIBS = @FREETYPE_LIBS@
GDK_CFLAGS = @GDK_CFLAGS@
GDK_FEATURE = @GDK_FEATURE@
GDK_LIBS = @GDK_LIBS@
GLIB_MKENUMS = @GLIB_MKENUMS@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTK_TEST_CFLAGS = @GTK_TEST_CFLAGS@
GTK_TEST_LIBS = @GTK_TEST_LIBS@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LCMS_CFLAGS = @LCMS_CFLAGS@
LCMS_LIBS = @LCMS_LIBS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBJPEG_LIBS = @LIBJPEG_LIBS@
LIBOBJS = @LIBOBJS@
LIBOPENJPEG_LIBS = @LIBOPENJPEG_LIBS@
LIBPNG_LIBS = @LIBPNG_LIBS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MOCQT4 = @MOCQT4@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PC_REQUIRES = @PC_REQUIRES@
PC_REQUIRES_PRIVATE = @PC_REQUIRES_PRIVATE@
PKG_CONFIG = @PKG_CONFIG@
POPPLER_DATADIR = @POPPLER_DATADIR@
POPPLER_GLIB_CFLAGS = @POPPLER_GLIB_CFLAGS@
POPPLER_GLIB_DISABLE_DEPRECATED = @POPPLER_GLIB_DISABLE_DEPRECATED@
POPPLER_GLIB_DISABLE_SINGLE_INCLUDES = @POPPLER_GLIB_DISABLE_SINGLE_INCLUDES@
POPPLER_GLIB_LIBS = @POPPLER_GLIB_LIBS@
POPPLER_MAJOR_VERSION = @POPPLER_MAJOR_VERSION@
POPPLER_MICRO_VERSION = @POPPLER_MICRO_VERSION@
POPPLER_MINOR_VERSION = @POPPLER_MINOR_VERSION@
POPPLER_QT4_CFLAGS = @POPPLER_QT4_CFLAGS@
POPPLER_QT4_CXXFLAGS = @POPPLER_QT4_CXXFLAGS@
POPPLER_QT4_LIBS = @POPPLER_QT4_LIBS@
POPPLER_QT4_TEST_CFLAGS = @POPPLER_QT4_TEST_CFLAGS@
POPPLER_QT4_TEST_LIBS = @POPPLER_QT4_TEST_LIBS@
POPPLER_QT_CXXFLAGS = @POPPLER_QT_CXXFLAGS@
POPPLER_QT_LIBS = @POPPLER_QT_LIBS@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
ZLIB_LIBS = @ZLIB_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
acx_pthread_config = @acx_pthread_config@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
auto_import_flags = @auto_import_flags@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
create_shared_lib = @create_shared_lib@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
win32_libs = @win32_libs@
ACLOCAL_AMFLAGS = -I m4
DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc
@BUILD_SPLASH_OUTPUT_TRUE@splash_subdir = splash
@BUILD_SPLASH_OUTPUT_TRUE@splash_pc_file = poppler-splash.pc
@BUILD_CAIRO_OUTPUT_TRUE@cairo_pc_file = poppler-cairo.pc
@BUILD_POPPLER_GLIB_TRUE@glib_subdir = glib
@BUILD_POPPLER_GLIB_TRUE@glib_pc_file = poppler-glib.pc
@BUILD_POPPLER_QT_TRUE@qt_subdir = qt
@BUILD_POPPLER_QT_TRUE@qt_pc_file = poppler-qt.pc
@BUILD_POPPLER_QT4_TRUE@qt4_subdir = qt4
@BUILD_POPPLER_QT4_TRUE@qt4_pc_file = poppler-qt4.pc
@BUILD_UTILS_TRUE@utils_subdir = utils
SUBDIRS = goo fofi $(splash_subdir) poppler $(utils_subdir) $(glib_subdir) $(qt_subdir) test $(qt4_subdir)

# Add CMake buildsystem files here so they get added on make dist
EXTRA_DIST = README-XPDF poppler.pc.in poppler-cairo.pc.in \
       poppler-splash.pc.in poppler-qt.pc.in glib/demo/CMakeLists.txt \
       glib/CMakeLists.txt glib/poppler-features.h.cmake \
       qt/CMakeLists.txt qt4/src/CMakeLists.txt \
       qt4/tests/CMakeLists.txt qt4/CMakeLists.txt \
       qt4/demos/CMakeLists.txt test/CMakeLists.txt \
       utils/CMakeLists.txt CMakeLists.txt ConfigureChecks.cmake \
       cmake/modules/COPYING-CMAKE-SCRIPTS \
       cmake/modules/FindCairo.cmake \
       cmake/modules/FindFontconfig.cmake cmake/modules/FindGTK.cmake \
       cmake/modules/FindLCMS.cmake cmake/modules/FindQt3.cmake \
       cmake/modules/FindQt4.cmake cmake/modules/MacroBoolTo01.cmake \
       cmake/modules/MacroEnsureVersion.cmake \
       cmake/modules/MacroOptionalFindPackage.cmake \
       cmake/modules/MacroPushRequiredVars.cmake \
       cmake/modules/PopplerDefaults.cmake \
       cmake/modules/PopplerMacros.cmake \
       cmake/modules/FindLIBOPENJPEG.cmake config.h.cmake \
       poppler-cairo.pc.cmake poppler-config.h.cmake \
       poppler-glib.pc.cmake poppler-qt.pc.cmake poppler-qt4.pc.cmake \
       poppler-splash.pc.cmake poppler.pc.cmake
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = \
       poppler.pc                              \
       $(cairo_pc_file)                        \
       $(splash_pc_file)                       \
       $(glib_pc_file)                         \
       $(qt_pc_file)                           \
       $(qt4_pc_file)

all: config.h
       $(MAKE) $(AM_MAKEFLAGS) all-recursive

SUFFIXES:
am--refresh:
       @:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
       @for dep in $?; do \
         case '$(am__configure_deps)' in \
           *$$dep*) \
             echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
             $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
               && exit 0; \
             exit 1;; \
         esac; \
       done; \
       echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
       $(am__cd) $(top_srcdir) && \
         $(AUTOMAKE) --foreign Makefile
PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
       @case '$?' in \
         *config.status*) \
           echo ' $(SHELL) ./config.status'; \
           $(SHELL) ./config.status;; \
         *) \
           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
           cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
       esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
       $(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
       $(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
       $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
       @if test ! -f $@; then \
         rm -f stamp-h1; \
         $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
       else :; fi

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
       @rm -f stamp-h1
       cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in:  $(am__configure_deps)
       ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
       rm -f stamp-h1
       touch $@

distclean-hdr:
       -rm -f config.h stamp-h1
poppler.pc: $(top_builddir)/config.status $(srcdir)/poppler.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@
poppler-cairo.pc: $(top_builddir)/config.status $(srcdir)/poppler-cairo.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@
poppler-splash.pc: $(top_builddir)/config.status $(srcdir)/poppler-splash.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@
poppler-glib.pc: $(top_builddir)/config.status $(srcdir)/poppler-glib.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@
poppler-qt.pc: $(top_builddir)/config.status $(srcdir)/poppler-qt.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@
poppler-qt4.pc: $(top_builddir)/config.status $(srcdir)/poppler-qt4.pc.in
       cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
       -rm -f *.lo

clean-libtool:
       -rm -rf .libs _libs

distclean-libtool:
       -rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
       @$(NORMAL_INSTALL)
       test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
       @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
       for p in $$list; do \
         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
         echo "$$d$$p"; \
       done | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
       done

uninstall-pkgconfigDATA:
       @$(NORMAL_UNINSTALL)
       @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
       test -n "$$files" || exit 0; \
       echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
       cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
       @failcom='exit 1'; \
       for f in x $$MAKEFLAGS; do \
         case $$f in \
           *=* | --[!k]*);; \
           *k*) failcom='fail=yes';; \
         esac; \
       done; \
       dot_seen=no; \
       target=`echo $@ | sed s/-recursive//`; \
       list='$(SUBDIRS)'; for subdir in $$list; do \
         echo "Making $$target in $$subdir"; \
         if test "$$subdir" = "."; then \
           dot_seen=yes; \
           local_target="$$target-am"; \
         else \
           local_target="$$target"; \
         fi; \
         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
         || eval $$failcom; \
       done; \
       if test "$$dot_seen" = "no"; then \
         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
       fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
       @failcom='exit 1'; \
       for f in x $$MAKEFLAGS; do \
         case $$f in \
           *=* | --[!k]*);; \
           *k*) failcom='fail=yes';; \
         esac; \
       done; \
       dot_seen=no; \
       case "$@" in \
         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
         *) list='$(SUBDIRS)' ;; \
       esac; \
       rev=''; for subdir in $$list; do \
         if test "$$subdir" = "."; then :; else \
           rev="$$subdir $$rev"; \
         fi; \
       done; \
       rev="$$rev ."; \
       target=`echo $@ | sed s/-recursive//`; \
       for subdir in $$rev; do \
         echo "Making $$target in $$subdir"; \
         if test "$$subdir" = "."; then \
           local_target="$$target-am"; \
         else \
           local_target="$$target"; \
         fi; \
         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
         || eval $$failcom; \
       done && test -z "$$fail"
tags-recursive:
       list='$(SUBDIRS)'; for subdir in $$list; do \
         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
       done
ctags-recursive:
       list='$(SUBDIRS)'; for subdir in $$list; do \
         test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
       done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
       unique=`for i in $$list; do \
           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
         done | \
         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
             END { if (nonempty) { for (i in files) print i; }; }'`; \
       mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
               $(TAGS_FILES) $(LISP)
       set x; \
       here=`pwd`; \
       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
         include_option=--etags-include; \
         empty_fix=.; \
       else \
         include_option=--include; \
         empty_fix=; \
       fi; \
       list='$(SUBDIRS)'; for subdir in $$list; do \
         if test "$$subdir" = .; then :; else \
           test ! -f $$subdir/TAGS || \
             set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
         fi; \
       done; \
       list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
       unique=`for i in $$list; do \
           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
         done | \
         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
             END { if (nonempty) { for (i in files) print i; }; }'`; \
       shift; \
       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
         test -n "$$unique" || unique=$$empty_fix; \
         if test $$# -gt 0; then \
           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
             "$$@" $$unique; \
         else \
           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
             $$unique; \
         fi; \
       fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
               $(TAGS_FILES) $(LISP)
       list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
       unique=`for i in $$list; do \
           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
         done | \
         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
             END { if (nonempty) { for (i in files) print i; }; }'`; \
       test -z "$(CTAGS_ARGS)$$unique" \
         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
            $$unique

GTAGS:
       here=`$(am__cd) $(top_builddir) && pwd` \
         && $(am__cd) $(top_srcdir) \
         && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
       $(am__remove_distdir)
       test -d "$(distdir)" || mkdir "$(distdir)"
       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
       list='$(DISTFILES)'; \
         dist_files=`for file in $$list; do echo $$file; done | \
         sed -e "s|^$$srcdirstrip/||;t" \
             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
       case $$dist_files in \
         */*) $(MKDIR_P) `echo "$$dist_files" | \
                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                          sort -u` ;; \
       esac; \
       for file in $$dist_files; do \
         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
         if test -d $$d/$$file; then \
           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
           if test -d "$(distdir)/$$file"; then \
             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
           fi; \
           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
           fi; \
           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
         else \
           test -f "$(distdir)/$$file" \
           || cp -p $$d/$$file "$(distdir)/$$file" \
           || exit 1; \
         fi; \
       done
       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
         if test "$$subdir" = .; then :; else \
           test -d "$(distdir)/$$subdir" \
           || $(MKDIR_P) "$(distdir)/$$subdir" \
           || exit 1; \
         fi; \
       done
       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
         if test "$$subdir" = .; then :; else \
           dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
           $(am__relativize); \
           new_distdir=$$reldir; \
           dir1=$$subdir; dir2="$(top_distdir)"; \
           $(am__relativize); \
           new_top_distdir=$$reldir; \
           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
           echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
           ($(am__cd) $$subdir && \
             $(MAKE) $(AM_MAKEFLAGS) \
               top_distdir="$$new_top_distdir" \
               distdir="$$new_distdir" \
               am__remove_distdir=: \
               am__skip_length_check=: \
               am__skip_mode_fix=: \
               distdir) \
             || exit 1; \
         fi; \
       done
       $(MAKE) $(AM_MAKEFLAGS) \
         top_distdir="$(top_distdir)" distdir="$(distdir)" \
         dist-hook
       -test -n "$(am__skip_mode_fix)" \
       || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
         ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
         ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
         ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
       || chmod -R a+r "$(distdir)"
dist-gzip: distdir
       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
       $(am__remove_distdir)

dist-bzip2: distdir
       tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
       $(am__remove_distdir)

dist-lzma: distdir
       tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
       $(am__remove_distdir)

dist-xz: distdir
       tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
       $(am__remove_distdir)

dist-tarZ: distdir
       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
       $(am__remove_distdir)

dist-shar: distdir
       shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
       $(am__remove_distdir)

dist-zip: distdir
       -rm -f $(distdir).zip
       zip -rq $(distdir).zip $(distdir)
       $(am__remove_distdir)

dist dist-all: distdir
       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
       $(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
       case '$(DIST_ARCHIVES)' in \
       *.tar.gz*) \
         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
       *.tar.bz2*) \
         bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
       *.tar.lzma*) \
         unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
       *.tar.xz*) \
         xz -dc $(distdir).tar.xz | $(am__untar) ;;\
       *.tar.Z*) \
         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
       *.shar.gz*) \
         GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
       *.zip*) \
         unzip $(distdir).zip ;;\
       esac
       chmod -R a-w $(distdir); chmod a+w $(distdir)
       mkdir $(distdir)/_build
       mkdir $(distdir)/_inst
       chmod a-w $(distdir)
       test -d $(distdir)/_build || exit 0; \
       dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
         && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
         && am__cwd=`pwd` \
         && $(am__cd) $(distdir)/_build \
         && ../configure --srcdir=.. --prefix="$$dc_install_base" \
           $(DISTCHECK_CONFIGURE_FLAGS) \
         && $(MAKE) $(AM_MAKEFLAGS) \
         && $(MAKE) $(AM_MAKEFLAGS) dvi \
         && $(MAKE) $(AM_MAKEFLAGS) check \
         && $(MAKE) $(AM_MAKEFLAGS) install \
         && $(MAKE) $(AM_MAKEFLAGS) installcheck \
         && $(MAKE) $(AM_MAKEFLAGS) uninstall \
         && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
               distuninstallcheck \
         && chmod -R a-w "$$dc_install_base" \
         && ({ \
              (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
                   distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
             } || { rm -rf "$$dc_destdir"; exit 1; }) \
         && rm -rf "$$dc_destdir" \
         && $(MAKE) $(AM_MAKEFLAGS) dist \
         && rm -rf $(DIST_ARCHIVES) \
         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
         && cd "$$am__cwd" \
         || exit 1
       $(am__remove_distdir)
       @(echo "$(distdir) archives ready for distribution: "; \
         list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
         sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
       @$(am__cd) '$(distuninstallcheck_dir)' \
       && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
          || { echo "ERROR: files left after uninstall:" ; \
               if test -n "$(DESTDIR)"; then \
                 echo "  (check DESTDIR support)"; \
               fi ; \
               $(distuninstallcheck_listfiles) ; \
               exit 1; } >&2
distcleancheck: distclean
       @if test '$(srcdir)' = . ; then \
         echo "ERROR: distcleancheck can only run from a VPATH build" ; \
         exit 1 ; \
       fi
       @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
         || { echo "ERROR: files left in build directory after distclean:" ; \
              $(distcleancheck_listfiles) ; \
              exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
       for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
       done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
         `test -z '$(STRIP)' || \
           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
       @echo "This command is intended for maintainers to use"
       @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
       -rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
       distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
       -rm -rf $(top_srcdir)/autom4te.cache
       -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-pkgconfigDATA

MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
       ctags-recursive install-am install-strip tags-recursive

PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
       all all-am am--refresh check check-am clean clean-generic \
       clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
       dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
       dist-zip distcheck distclean distclean-generic distclean-hdr \
       distclean-libtool distclean-tags distcleancheck distdir \
       distuninstallcheck dvi dvi-am html html-am info info-am \
       install install-am install-data install-data-am install-dvi \
       install-dvi-am install-exec install-exec-am install-html \
       install-html-am install-info install-info-am install-man \
       install-pdf install-pdf-am install-pkgconfigDATA install-ps \
       install-ps-am install-strip installcheck installcheck-am \
       installdirs installdirs-am maintainer-clean \
       maintainer-clean-generic mostlyclean mostlyclean-generic \
       mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
       uninstall uninstall-am uninstall-pkgconfigDATA


dist-hook: ChangeLog

ChangeLog : .git/HEAD
       $(AM_V_GEN) git log --stat > ChangeLog

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
NOEXPORT:

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.