The items made available through this website
are subject to United States export laws and
may be subject to export and import laws
of other countries. You agree to strictly comply
with all such laws and obtain licenses to
export, re-export, or import as may be required.
Unless expressly authorized by the United States
Government to do so you will not, directly or
indirectly, export or re-export the items made
available through this website, nor direct the
items therefrom, to any embargoed or restricted
country identified in the United States export
laws, including but not limited to the Export
Administration Regulations (15 C.F.R. Parts
730-774).
1) Installation diskette
2) Uninstall diskette
3) Patch Guide with instructions and graphics on installing
the 105410-04 patch on the SunScreen SPF-200 Screen.
Solaris Release:
SunOS Release:
Unbundled Product: SunScreen SPF-200
Unbundled Release: 1.0
Relevant Architectures:
BugId's fixed with this patch: 4058923 4041619 4087491
Changes incorporated in this version:
Patches accumulated and obsoleted by this patch:
Patches which conflict with this patch:
Patches required with this patch:
Obsoleted by:
Files included with this patch:
SUNWqfed
/kernel/drv/qfe
SUNWhmd
/kernel/drv/hme
Problem Description:
Correct and improve the QFE driver installation process.
(from 104212-03)
4087491 - need support of X1049A QFE 2.0 board (SUNWqfed)
(from 104212-02)
Produced to incorporate more recent hme driver version.
(from 104212-01)
4058923 - customer cannot buy a quad ethernet board for the SPF-200
(SUNWhmd)
4041619 - RFE need support of 100mb quad ethernet interface (SUNWhmd)
Instructions to install patch on SunScreen SPF-200 Screen
---------------------------------------------------------
1. Insert the patch floppy into the Screen's floppy drive.
2. Reminder: the SunScreen SPF-200 CD-ROM must be in the Screen's
CD-ROM drive, as is usually the case.
3. Turn the Screen off; wait ten seconds; turn the Screen on.
Instructions for identifying patches installed on system:
----------------------------------------------------------
1. To identify the patch level on your SunScreen SPF-200 Screen (since
there is no keyboard or monitor), you must use this command:
