*% Adobe Systems PostScript(R) Printer Description File
*% For "QMS-PS 820" version 51.7
*% Produced by "BuildPPD.ps" version 3.0 edit 58
*%
*% Copyright 1988, 1989, 1990 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*%
*% The byte count of this file should be exactly 010900 or 011252
*% depending on the filesystem it resides in.
*%
*% Date: 31 May 1990
*FormatVersion: "3.0"
*FileVersion: "1.0"
*LanguageVersion: English
*% General Information and Defaults ===============
*FreeVM: "401966"
*ColorDevice: False
*VariablePaperSize: False
*FileSystem: True
*?FileSystem: "statusdict begin diskonline
{(True)}{(False)} ifelse = flush"
*End
*Throughput: "8"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict begin checkpassword end not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict begin exitserver
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict begin checkpassword end not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict begin exitserver
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultPageSize: None
*%------------------------ GY:29 July 91 - Changed ---------------------------
*% Modified to use letter versus lettertray command for Windows 3.0 driver
*% since the printer does not check the current tray for proper size before
*% switching to the default tray when a lettertray command is encountered.
*%PageSize Letter: "statusdict begin lettertray end"
*%PageSize Legal: "statusdict begin legaltray end"
*%PageSize A4: "statusdict begin a4tray end"
*%PageSize B5: "statusdict begin b5tray end"
*PageSize Letter: "letter"
*PageSize Legal: "legal"
*PageSize A4: "a4"
*PageSize B5: "b5"
*%----------------------------------------------------------------------------
*?PageSize: "
save statusdict begin
4 dict begin
/letter (Letter) def
/legal (Legal) def
/a4tray (A4) def
/b5tray (B5) def
papersize {
{load exec} stopped not{= flush}if
}{
{load exec} stopped not{print (.Transverse) = flush}{(Unknown) = flush}ifelse
}ifelse
end
end restore
"
*End
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)"
*Font AvantGarde-BookOblique: Standard "(001.002)"
*Font AvantGarde-Demi: Standard "(001.003)"
*Font AvantGarde-DemiOblique: Standard "(001.003)"
*Font Bookman-Demi: Standard "(001.001)"
*Font Bookman-DemiItalic: Standard "(001.001)"
*Font Bookman-Light: Standard "(001.001)"
*Font Bookman-LightItalic: Standard "(001.001)"
*Font Courier: Standard "(001.004)"
*Font Courier-Bold: Standard "(001.004)"
*Font Courier-BoldOblique: Standard "(001.004)"
*Font Courier-Oblique: Standard "(001.004)"
*Font Helvetica: Standard "(001.002)"
*Font Helvetica-Bold: Standard "(001.002)"
*Font Helvetica-BoldOblique: Standard "(001.002)"
*Font Helvetica-Condensed: Standard "(001.001)"
*Font Helvetica-Condensed-Bold: Standard "(001.002)"
*Font Helvetica-Condensed-BoldObl: Standard "(001.002)"
*Font Helvetica-Condensed-Oblique: Standard "(001.001)"
*Font Helvetica-Narrow: Standard "(001.002)"
*Font Helvetica-Narrow-Bold: Standard "(001.002)"
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)"
*Font Helvetica-Narrow-Oblique: Standard "(001.002)"
*Font Helvetica-Oblique: Standard "(001.002)"
*Font NewCenturySchlbk-Bold: Standard "(001.006)"
*Font NewCenturySchlbk-BoldItalic: Standard "(001.004)"
*Font NewCenturySchlbk-Italic: Standard "(001.003)"
*Font NewCenturySchlbk-Roman: Standard "(001.004)"
*Font Palatino-Bold: Standard "(001.002)"
*Font Palatino-BoldItalic: Standard "(001.002)"
*Font Palatino-Italic: Standard "(001.002)"
*Font Palatino-Roman: Standard "(001.001)"
*Font Symbol: Special "(001.003)"
*Font Times-Bold: Standard "(001.002)"
*Font Times-BoldItalic: Standard "(001.004)"
*Font Times-Italic: Standard "(001.002)"
*Font Times-Roman: Standard "(001.002)"
*Font ZapfChancery-MediumItalic: Standard "(001.003)"
*Font ZapfDingbats: Special "(001.002)"
*?FontList: "
save 2 dict begin /sv exch def
/str 128 string def
FontDirectory { pop == } bind forall flush
/filenameforall where {
pop save (fonts/*) {
dup length 6 sub 6 exch getinterval cvn ==
} bind str filenameforall flush restore
} if
(*) = flush
sv end restore
"
*End
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: upper unit open"
*Status: "PrinterError: paper jam"
*Status: "PrinterError: toner cartridge low"
*Status: "PrinterError: laser diode or scanning mirror malfunction"
*Status: "PrinterError: toner cartridge missing or incorrect"
*Status: "PrinterError: scanner motor malfunction"
*Status: "PrinterError: fixing temperature malfunction"
*Status: "PrinterError: scanner motor, laser diode or scanning mirror malfunction"
*Status: "PrinterError: service call"
