*PPD-Adobe: "4.1"
*% Adobe PostScript(R) Printer Description File
*% For Lexmark Optra C LaserPrinter
*% For use with Adobe's and similar printer drivers
*% Produced by Lexmark International, Inc.
*%
*% Copyright (c) 1993-1998 Lexmark International Inc.  All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*%

*FormatVersion: "4.1"
*FileVersion: "1.1"
*LanguageVersion: English
*PCFileName: "LOPTRAC.PPD"
*Product: "(Lexmark Optra C)"
*PSVersion: "(2014)"
*ModelName: "Lexmark Optra C"
*ShortNickName: "Lexmark Optra C PS"
*NickName: "Lexmark Optra C PS"

*% === Options and Constraints ============

*OpenGroup: InstallableOptions/Options Installed

*OpenUI *Option1/Lower Tray - Option: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1

*OpenUI *Option2/Flash Memory Card - Option: Boolean
*DefaultOption2: False
*Option2 False/Not Installed: ""
*Option2 True/Installed: ""
*CloseUI: *Option2

*OpenUI *Option3/Printer Hard Disk - Option: Boolean
*DefaultOption3: False
*Option3 False/Not Installed: ""
*Option3 True/Installed: ""
*CloseUI: *Option3

*OpenUI *InstalledMemory/Printer Memory - Option: PickOne
*DefaultInstalledMemory: 8Meg
*InstalledMemory 8Meg/8 MB Printer Memory: ""
*InstalledMemory 2Meg/2 MB Printer Memory: ""
*InstalledMemory 4Meg/4 MB Printer Memory: ""
*InstalledMemory 6Meg/6 MB Printer Memory: ""
*InstalledMemory 10Meg/10 MB Printer Memory: ""
*InstalledMemory 12Meg/12 MB Printer Memory: ""
*InstalledMemory 16Meg/16 MB Printer Memory: ""
*InstalledMemory 18Meg/18 MB Printer Memory: ""
*InstalledMemory 20Meg/20 MB Printer Memory: ""
*InstalledMemory 24Meg/24 MB Printer Memory: ""
*InstalledMemory 32Meg/32 or more MB Printer Memory: ""
*CloseUI: *InstalledMemory

*CloseGroup: InstallableOptions

*UIConstraints: *Option1 False *InputSlot Lower
*UIConstraints: *Option1 False *TraySwitch
*UIConstraints: *Option2 None  *Flash
*UIConstraints: *Option3 False *HardDisk

*% === Basic Capabilities ============

*LanguageLevel: "2"
*Protocols: PJL TBCP
*TTRasterizer:  Type42
*FreeVM:            "1290000"
*VMOption 2Meg:     "376000"
*VMOption 4Meg:     "728000"
*VMOption 6Meg:     "828000"
*VMOption 8Meg:     "1290000"
*VMOption 10Meg:    "1290000"
*VMOption 12Meg:    "1546000"
*VMOption 16Meg:    "2058000"
*VMOption 18Meg:    "2058000"
*VMOption 20Meg:    "2058000"
*VMOption 24Meg:    "2058000"
*VMOption 32Meg:    "2058000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*VariablePaperSize: False
*Throughput: "3"
*Password: "0"
*ExitServer: "
count 0 eq   % is the password on the stack?
{ true }
{ dup        % potential password
  statusdict /checkpassword get exec not
} ifelse
{  %  if no password or not valid
  (WARNING : Cannot perform the exitserver command.) =
  (Password supplied is not valid.) =
  (Please contact the author of this software.) = flush
  quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq  % is the password on the stack?
{ true }
{ dup      % potential password
  statusdict /checkpassword get exec not
} ifelse
{  %  if no password or not valid
  (WARNING : Cannot reset printer.) =
  (Password supplied is not valid.) =
  (Please contact the author of this software.) = flush
  quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End

*% === Job Control Language ==

*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"

*JCLOpenUI *JCLCollate/Collate Copies: PickOne
*DefaultJCLCollate: PrinterSetting
*OrderDependency: 10 JCLSetup  *JCLCollate
*JCLCollate PrinterSetting/Printer Setting: ""
*JCLCollate False/Off: "@PJL SET LCOLLATION = OFF<0A>"
*JCLCollate True/On: "@PJL SET LCOLLATION = ON<0A>"
*JCLCloseUI: *JCLCollate


*% === Resolution ============

*OpenUI *Resolution:  PickOne
*DefaultResolution: 600dpi
*OrderDependency: 10 AnySetup *Resolution
*Resolution 600dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get 0 get
(     ) cvs print (dpi) = flush
restore
"
*End
*CloseUI: *Resolution


*% === Halftone Information ===============

*ScreenFreq: "53.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Factory
*Transfer Factory: "{ }"
*Transfer Factory.Inverse: "{ 1 exch sub }"

*OpenUI *ColorCorrection/Color Correction: PickOne
*OrderDependency: 10 AnySetup *ColorCorrection
*DefaultColorCorrection: PrinterSetting
*ColorCorrection PrinterSetting/Printer Setting: ""
*ColorCorrection Off/Off: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection null put put setpagedevice"
*ColorCorrection Display/Display: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Display put put setpagedevice"
*ColorCorrection Vivid/Vivid: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /Vivid put put setpagedevice"
*ColorCorrection SWOP/SWOP: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorCorrection /SWOP put put setpagedevice"
*?ColorCorrection: "
save statusdict begin
[(Off) (Display) (Vivid) (SWOP)]
colorcorrection 1 sub get = flush
end
restore"
*End
*CloseUI: *ColorCorrection

*OpenUI *ColorRegistration/Color Registration: PickOne
*OrderDependency: 10 AnySetup *ColorRegistration
*DefaultColorRegistration: PrinterSetting
*ColorRegistration PrinterSetting/Printer Setting: ""
*ColorRegistration 4Cycle/High Speed: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 0 put put setpagedevice"
*ColorRegistration 5Cycle/High Quality: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /ColorRegistration 1 put put setpagedevice"
*?ColorRegistration: "
save statusdict begin
[(4Cycle) (5Cycle)]
colorregistration 1 sub get = flush
end
restore"
*End
*CloseUI: *ColorRegistration

*OpenUI *FinishQuality/Finish Quality: PickOne
*OrderDependency: 10 AnySetup *FinishQuality
*DefaultFinishQuality: PrinterSetting
*FinishQuality PrinterSetting/Printer Setting: ""
*FinishQuality Medium/Medium Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 0 put put setpagedevice"
*FinishQuality High/High Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 1 put put setpagedevice"
*FinishQuality Low/Low Gloss: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /FinishQuality 2 put put setpagedevice"
*?FinishQuality: "
save statusdict begin
[(medium) (high) (low)] finishquality get = flush
end
restore"
*End
*CloseUI: *FinishQuality

*OpenUI *Screening/Screening: PickOne
*OrderDependency: 10 AnySetup *Screening
*DefaultScreening: PrinterSetting
*Screening PrinterSetting/Printer Setting: ""
*Screening ColorGrade/ColorGrade: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /ColorGrade put put setpagedevice"
*Screening Contone/Contone: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Contone put put setpagedevice"
*Screening Stochastic/Stochastic: "1 dict dup /DeviceRenderingInfo 2 dict dup /Type 95 put dup /Screening /Stochastic put put setpagedevice"
*?Screening: "
save statusdict begin
[(ColorGrade) (Contone) (Stochastic)] screening 1 sub get = flush
end
restore"
*End
*CloseUI: *Screening

*% === Paper Handling ===================

*LandscapeOrientation: Plus90

*% These entries will set up the frame buffer.
*OpenUI *PageSize:  PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter 8 1/2 x 11 in: "
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Legal/Legal 8 1/2 x 14 in: "
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
*End
*PageSize A4/A4 210 x 297 mm: "
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize B5/B5 182 x 257 mm: "
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
*End
*?PageSize: "
save
13 dict
  dup /letter (Letter) put
  dup /legal (Legal) put
  dup /a4 (A4) put
  dup /b5 (B5) put
statusdict /papersize get exec
3 1 roll  {get} stopped {(Unknown)}if
exch  not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer.
*% Usually used with input slots other than AutoSelect.
*OpenUI *PageRegion:  PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "
2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Legal: "
2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion A4: "
2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion B5: "
2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
*End
*CloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter:    "8 14 602 763"
*ImageableArea Legal:     "8 14 602 979"
*ImageableArea A4:        "8 14 586 813"
*ImageableArea B5:        "8 14 506 699"
*?ImageableArea: "
save
/cvp { cvi (            ) cvs print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat flush
restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter:    "612 792"
*PaperDimension Legal:     "612 1008"
*PaperDimension A4:        "595 842"
*PaperDimension B5:        "516 729"

*RequiresPageRegion All: True
*OpenUI *InputSlot:  PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "
1 dict dup /MediaPosition null put setpagedevice
currentpagedevice /InputAttributes get 0 get setpagedevice
1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
*End
*InputSlot Lower: "
1 dict dup /MediaPosition null put setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice
1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
*End
*InputSlot Feeder/Multipurpose Feeder: "
1 dict dup /MediaPosition null put setpagedevice
currentpagedevice /InputAttributes get 2 get setpagedevice
1 dict dup /InputAttributes 1 dict dup /Priority [2] put put setpagedevice
1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
*End
*?InputSlot: "
save
[ (Upper) (Lower) (Feeder) ]
statusdict /papertray get exec
{get exec} stopped { pop pop (Unknown) } if = flush
restore
"
*End
*CloseUI: *InputSlot

*OpenUI *TraySwitch/Tray Linking: PickOne
*OrderDependency: 50 AnySetup *TraySwitch
*DefaultTraySwitch: None
*TraySwitch None/Printer Setting:  ""
*TraySwitch True/On:  "1 dict dup /TraySwitch true  put setpagedevice"
*TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice"
*?TraySwitch: "
save
currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *TraySwitch

*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne
*DefaultJCLPortRotation: None
*OrderDependency: 10 JCLSetup  *JCLPortRotation
*JCLPortRotation None/Printer Setting: ""
*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"
*JCLCloseUI: *JCLPortRotation

*DefaultOutputOrder: Normal
*OutputOrder Normal: ""
*OutputOrder Reverse: ""


*% === Font Information ==========================================

*DefaultFont: Courier
*Font Courier: Standard "(001.000)" Standard ROM
*Font Courier-Bold: Standard "(001.000)" Standard ROM
*Font Courier-Oblique: Standard "(001.000)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
*Font Times-Roman: Standard "(001.000)" Standard ROM
*Font Times-Bold: Standard "(001.000)" Standard ROM
*Font Times-Italic: Standard "(001.000)" Standard ROM
*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
*Font Helvetica: Standard "(001.000)" Standard ROM
*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.000)" Standard ROM
*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
*Font Bookman-Demi: Standard "(001.000)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
*Font Bookman-Light: Standard "(001.000)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
*Font Helvetica-Light: Standard "(001.000)" Standard ROM
*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Black: Standard "(001.000)" Standard ROM
*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
*Font Palatino-Roman: Standard "(001.000)" Standard ROM
*Font Palatino-Bold: Standard "(001.000)" Standard ROM
*Font Palatino-Italic: Standard "(001.000)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM
*?FontQuery: "
save
4 dict begin
 /sv exch def
 /str (fonts/                              ) def
 /st2 128 string def
 { count 0 gt
  { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
   {pop (Yes)}
   { str exch st2 cvs dup length /len exch def
    6 exch putinterval str 0 len 6 add getinterval mark exch
    { } st2 filenameforall counttomark 0 gt
    { cleartomark (Yes)}{cleartomark (No)}ifelse
   }ifelse = flush
  }{ exit } ifelse
 } bind loop
 (*) = flush
 sv
end
restore
"
*End

*?FontList: "
save
2 dict begin
 /sv exch def
 /str 128 string def
 FontDirectory { pop == } bind forall flush
 /filenameforall where
 { pop save (fonts/*)
  { dup length 6 sub 6 exch getinterval cvn == } bind
  str filenameforall flush restore
 } if
 (*) = flush
 sv
end
restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%  exitserver: permanent state may be changed  %%"
*Message: "%%  Flushing: rest of job (to end-of-file) will be ignored  %%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%  status: <one of these> %% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "not ready"

*% Input Sources (format: %%  status: <stat>; source: <one of these>  %% )
*Source: "Serial"
*Source: "Parallel"
*Source: "Network"

*% Printer Error (format: %%  PrinterError: <one of these>  %%)
*PrinterError: "Paper Jam"
*PrinterError: "Wrong Paper Length"
*PrinterError: "Invalid Manual Insertion"
*PrinterError: "Change Size in Feeder"
*PrinterError: "Change Size in Tray 1"
*PrinterError: "Change Size in Tray 2"
*PrinterError: "Paper Out or Feed Failure - Feed"
*PrinterError: "Load Manual Envelope"
*PrinterError: "Paper Out or Feed Failure - Tray 1"
*PrinterError: "Paper Out or Feed Failure - Tray 2"
*PrinterError: "Load Manual Paper"
*PrinterError: "Output Bin Full"
*PrinterError: "Cover Open/Cartridge Not Installed"
*PrinterError: "Insufficient Memory"
*PrinterError: "Complex Page"
*PrinterError: "Default Storage Error"
*PrinterError: "Defective Font Card Installed"
*PrinterError: "Flash Full"
*PrinterError: "ioerror"
*PrinterError: "Flash Error"
*PrinterError: "Duplex Not Attached"
*PrinterError: "Duplex Cover Open"
*PrinterError: "Scheduled Maintenance"
*PrinterError: "Toner Low"
*PrinterError: "Service Error"

*%DeviceAdjustMatrix: " 1 0 0 1 0 0 "

*% === Color Separation Information =====================

*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 85 lpi / 600 dpi  5,5,2,6,6,2,20/3,0) =====================

*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"

*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End

*%  For 71 lpi / 600 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"

*% End of PPD file for Lexmark Optra C LaserPrinter

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.