*PPD-Adobe:  "4.2"
*% Adobe PostScript(R) Printer Description File
*% For Lexmark C910 Laser Printers
*% Produced by Lexmark International, Inc.
*%
*% For use with Adobe PostScript Driver ver 3.0.1 or similar printer drivers
*%
*% Copyright (c) 1993-2001 Lexmark International Inc.  All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*FormatVersion: "4.2"
*FileVersion:  "1.0"
*LanguageVersion: English
*LanguageEncoding: WindowsANSI
*PCFileName: "LEXC910.PPD"
*Product: "(Lexmark C910 Laser Printer)"
*PSVersion: "(3010)"
*ModelName: "Lexmark C910 Laser Printer"
*ShortNickName: "Lexmark C910 PS"
*NickName: "Lexmark C910 PS"

*% ======== Installable Options  ============

*OpenGroup: InstallableOptions/Options Installed

*OpenUI *LowerTray/Tray 2 - Option: PickOne
*DefaultLowerTray: False
*LowerTray False/Not Installed: ""
*LowerTray 2True550/550-Sheet Drawer: ""
*%LowerTray 3True3000/3000-Sheet Drawer: ""
*CloseUI: *LowerTray

*OpenUI *Tray3/Tray 3 - Option: PickOne
*DefaultTray3: False
*Tray3 False/Not Installed: ""
*Tray3 2True550/550-Sheet Drawer: ""
*Tray3 3True3000/3000-Sheet Drawer: ""
*CloseUI: *Tray3

*OpenUI *Tray4/Tray 4 - Option: PickOne

*DefaultTray4: False
*Tray4 False/Not Installed: ""
*Tray4 2True550/550-Sheet Drawer: ""
*%Tray4 3True3000/3000-Sheet Drawer: ""
*CloseUI: *Tray4

*OpenUI *Tray5/Tray 5 - Option: PickOne
*DefaultTray5: False
*Tray5 False/Not Installed: ""
*Tray5 2True550/550-Sheet Drawer: ""
*Tray5 3True3000/3000-Sheet Drawer: ""
*CloseUI: *Tray5

*OpenUI *MPFeeder/MP Feeder: Boolean
*DefaultMPFeeder: True
*MPFeeder True/Installed: ""
*MPFeeder False/Not Installed: ""
*CloseUI: *MPFeeder

*OpenUI *Duplexer/Duplex Option: Boolean

*DefaultDuplexer: False
*Duplexer True/Installed: ""
*Duplexer False/Not Installed: ""
*CloseUI: *Duplexer
*OpenUI *Flash/Flash Memory Card - Option: Boolean
*DefaultFlash: False
*Flash True/Installed: ""
*Flash False/Not Installed: ""
*CloseUI: *Flash

*OpenUI *HardDisk/Printer Hard Disk - Option: Boolean
*DefaultHardDisk: False
*HardDisk True/Installed: ""
*HardDisk False/Not Installed: ""
*CloseUI: *HardDisk

*OpenUI *InstalledMemory/Printer Memory - Option: PickOne
*DefaultInstalledMemory: 64Meg
*InstalledMemory 64Meg/64 MB Printer Memory: ""
*%InstalledMemory 96Meg/96 MB Printer Memory: ""
*InstalledMemory 128Meg/128 MB Printer Memory: ""
*InstalledMemory 160Meg/160 MB Printer Memory: ""
*InstalledMemory 192Meg/192 MB Printer Memory: ""
*InstalledMemory 256Meg/256 MB Printer Memory: ""
*%InstalledMemory 288Meg/288 MB Printer Memory: ""
*InstalledMemory 320Meg/320 MB Printer Memory: ""
*InstalledMemory 384Meg/384 MB Printer Memory: ""
*InstalledMemory 448Meg/448 MB Printer Memory: ""
*InstalledMemory 512Meg/512 or more MB Printer Memory: ""
*CloseUI: *InstalledMemory

*OpenUI *FaxCard/Fax Card: Boolean
*DefaultFaxCard: False
*FaxCard True/Installed: ""
*FaxCard False/Not Installed: ""
*CloseUI: *FaxCard

*CloseGroup: InstallableOptions

*%=========== User Constraints ===================

*UIConstraints: *LowerTray False   *InputSlot Tray2
*UIConstraints: *LowerTray False   *InputSlot Tray3
*UIConstraints: *LowerTray False   *InputSlot Tray4
*UIConstraints: *LowerTray False   *InputSlot Tray5

*UIConstraints: *Tray3     False   *InputSlot Tray3
*UIConstraints: *Tray3     False   *InputSlot Tray4
*UIConstraints: *Tray3     False   *InputSlot Tray5

*UIConstraints: *Tray4     False   *InputSlot Tray4
*UIConstraints: *Tray4     False   *InputSlot Tray5

*UIConstraints: *Tray5     False   *InputSlot Tray5

*UIConstraints: *MPFeeder  False   *InputSlot MultiPurpose
*UIConstraints: *MPFeeder  False   *InputSlot Manual
*UIConstraints: *MPFeeder  False   *InputSlot ManualEnv

*UIConstraints: *LowerTray False     *Tray3 2True550
*UIConstraints: *LowerTray False     *Tray3 3True3000
*UIConstraints: *LowerTray False     *Tray4 2True550
*UIConstraints: *LowerTray False     *Tray5 2True550
*UIConstraints: *LowerTray False     *Tray5 3True3000

*UIConstraints: *Tray3 3True3000     *InputSlot Tray4
*UIConstraints: *Tray3 False         *Tray4 2True550
*UIConstraints: *Tray3 3True3000     *Tray4 2True550
*UIConstraints: *Tray3 3True3000     *InputSlot Tray5
*UIConstraints: *Tray3 False         *Tray5 2True550
*UIConstraints: *Tray3 False         *Tray5 3True3000
*UIConstraints: *Tray3 3True3000     *Tray5 2True550
*UIConstraints: *Tray3 3True3000     *Tray5 3True3000

*UIConstraints: *Tray4 False         *Tray5 2True550
*UIConstraints: *Tray4 False         *Tray5 3True3000

*% Duplex is "only" available when duplexer unit is installed.
*UIConstraints: *Duplexer False         *Duplex
*% Do not allow envelope sizes to be faxed.
*UIConstraints: *OutputTo Fax           *PageSize Monarch
*UIConstraints: *OutputTo Fax           *PageSize C9
*UIConstraints: *OutputTo Fax           *PageSize Comm10
*UIConstraints: *OutputTo Fax           *PageSize DL
*UIConstraints: *OutputTo Fax           *PageSize C5
*UIConstraints: *OutputTo Fax           *PageSize ISOB5
*%UIConstraints: *OutputTo Fax          *PageSize Other
*%UIConstraints: *InputSlot ManualEnv           *MediaType Plain
*%UIConstraints: *InputSlot ManualEnv           *MediaType Card
*%UIConstraints: *InputSlot ManualEnv           *MediaType Transparency
*%UIConstraints: *InputSlot ManualEnv           *MediaType Labels
*%UIConstraints: *InputSlot ManualEnv           *MediaType Bond
*%UIConstraints: *InputSlot ManualEnv           *MediaType Letterhead
*%UIConstraints: *InputSlot ManualEnv           *MediaType Preprint
*%UIConstraints: *InputSlot ManualEnv           *MediaType Color
*%UIConstraints: *InputSlot ManualEnv           *MediaType Glossy

*% Do not allow envelope sizes and paper types to be fed from trays
*UIConstraints: *PageSize Executive   *InputSlot Tray1
*UIConstraints: *PageSize Monarch     *InputSlot Tray1
*UIConstraints: *PageSize C9          *InputSlot Tray1
*UIConstraints: *PageSize Comm10      *InputSlot Tray1
*UIConstraints: *PageSize DL          *InputSlot Tray1
*UIConstraints: *PageSize C5          *InputSlot Tray1
*UIConstraints: *PageSize ISOB5       *InputSlot Tray1
*%UIConstraints: *PageSize Other       *InputSlot Tray1
*UIConstraints: *PageSize Executive   *InputSlot Tray2
*UIConstraints: *PageSize Monarch     *InputSlot Tray2
*UIConstraints: *PageSize C9          *InputSlot Tray2
*UIConstraints: *PageSize Comm10      *InputSlot Tray2
*UIConstraints: *PageSize DL          *InputSlot Tray2
*UIConstraints: *PageSize C5          *InputSlot Tray2
*UIConstraints: *PageSize ISOB5       *InputSlot Tray2
*%UIConstraints: *PageSize Other       *InputSlot Tray2

*UIConstraints: *PageSize Executive   *InputSlot Tray3
*UIConstraints: *PageSize Monarch     *InputSlot Tray3
*UIConstraints: *PageSize C9          *InputSlot Tray3
*UIConstraints: *PageSize Comm10      *InputSlot Tray3
*UIConstraints: *PageSize DL          *InputSlot Tray3
*UIConstraints: *PageSize C5          *InputSlot Tray3
*UIConstraints: *PageSize ISOB5       *InputSlot Tray3
*%UIConstraints: *PageSize Other       *InputSlot Tray3

*UIConstraints: *PageSize Executive   *InputSlot Tray4
*UIConstraints: *PageSize Monarch     *InputSlot Tray4
*UIConstraints: *PageSize C9          *InputSlot Tray4
*UIConstraints: *PageSize Comm10      *InputSlot Tray4
*UIConstraints: *PageSize DL          *InputSlot Tray4
*UIConstraints: *PageSize C5          *InputSlot Tray4
*UIConstraints: *PageSize ISOB5       *InputSlot Tray4
*%UIConstraints: *PageSize Other       *InputSlot Tray4

*UIConstraints: *PageSize Executive   *InputSlot Tray5
*UIConstraints: *PageSize Monarch     *InputSlot Tray5
*UIConstraints: *PageSize C9          *InputSlot Tray5
*UIConstraints: *PageSize Comm10      *InputSlot Tray5
*UIConstraints: *PageSize DL          *InputSlot Tray5
*UIConstraints: *PageSize C5          *InputSlot Tray5
*UIConstraints: *PageSize ISOB5       *InputSlot Tray5
*%UIConstraints: *PageSize Other       *InputSlot Tray5

*%UIConstraints: *PageSize Monarch     *ManualFeed
*%UIConstraints: *PageSize C9          *ManualFeed
*%UIConstraints: *PageSize Comm10      *ManualFeed
*%UIConstraints: *PageSize DL          *ManualFeed
*%UIConstraints: *PageSize C5          *ManualFeed
*%UIConstraints: *PageSize ISOB5       *ManualFeed
*%UIConstraints: *PageSize Other       *ManualFeed

*UIConstraints: *PageSize Monarch     *InputSlot Manual
*UIConstraints: *PageSize C9          *InputSlot Manual
*UIConstraints: *PageSize Comm10      *InputSlot Manual
*UIConstraints: *PageSize DL          *InputSlot Manual
*UIConstraints: *PageSize C5          *InputSlot Manual
*UIConstraints: *PageSize ISOB5       *InputSlot Manual
*%UIConstraints: *PageSize Other       *InputSlot Manual

*%UIConstraints: *InputSlot Tray1      *MediaType Card
*%UIConstraints: *InputSlot Tray1      *MediaType Labels
*%UIConstraints: *InputSlot Tray1      *MediaType Env
*%UIConstraints: *InputSlot Tray2      *MediaType Card
*%UIConstraints: *InputSlot Tray2      *MediaType Labels
*%UIConstraints: *InputSlot Tray2      *MediaType Env
*%UIConstraints: *InputSlot Tray3      *MediaType Card
*%UIConstraints: *InputSlot Tray3      *MediaType Labels
*%UIConstraints: *InputSlot Tray3      *MediaType Env
*%UIConstraints: *InputSlot Tray4      *MediaType Card
*%UIConstraints: *InputSlot Tray4      *MediaType Labels
*%UIConstraints: *InputSlot Tray4      *MediaType Env
*%UIConstraints: *InputSlot Tray5      *MediaType Card
*%UIConstraints: *InputSlot Tray5      *MediaType Labels
*%UIConstraints: *InputSlot Tray5      *MediaType Env

*% Do not allow non-envelope sizes to be fed from Envelope Feeder
*UIConstraints: *PageSize Letter       *InputSlot ManualEnv
*UIConstraints: *PageSize Legal        *InputSlot ManualEnv
*UIConstraints: *PageSize B5           *InputSlot ManualEnv
*UIConstraints: *PageSize A4           *InputSlot ManualEnv
*UIConstraints: *PageSize Executive    *InputSlot ManualEnv
*UIConstraints: *PageSize A5           *InputSlot ManualEnv
*UIConstraints: *PageSize B4           *InputSlot ManualEnv
*UIConstraints: *PageSize A3           *InputSlot ManualEnv
*UIConstraints: *PageSize Tabloid      *InputSlot ManualEnv
*%Do not allow Envelope Media Type in 550 Input Trays
*%UIConstraints:   *LowerTray 2True550  *MediaType Env
*%UIConstraints:   *Tray3     2True550  *MediaType Env
*%UIConstraints:   *Tray4     2True550  *MediaType Env
*%UIConstraints:   *Tray5     2True550  *MediaType Env

*% Do not allow Bond Media Type in 550 Input Trays
*%UIConstraints:   *LowerTray 2True550  *MediaType Bond
*%UIConstraints:   *Tray3     2True550  *MediaType Bond
*%UIConstraints:   *Tray4     2True550  *MediaType Bond
*%UIConstraints:   *Tray5     2True550  *MediaType Bond

*% Do not allow CardStock Media Type in 3000 Input Trays
*%UIConstraints:   *LowerTray 3True3000 *MediaType CardStock
*%UIConstraints:   *Tray3     3True3000 *MediaType CardStock
*%UIConstraints:   *Tray4     3True3000 *MediaType CardStock
*%UIConstraints:   *Tray5     3True3000 *MediaType CardStock

*% Do not allow Glossy Paper Media Type in Tray2,Tray3,Tray4,Tray5
*%UIConstraints:   *LowerTray 3True3000  *MediaType Glossy Paper
*%UIConstraints:   *Tray3     3True3000  *MediaType Glossy Paper
*%UIConstraints:   *Tray4     3True3000  *MediaType Glossy Paper
*%UIConstraints:   *Tray5     3True3000  *MediaType Glossy Paper
*%UIConstraints:   *Tray3     2True550   *MediaType Glossy Paper
*%UIConstraints:   *Tray4     2True550   *MediaType Glossy Paper
*%UIConstraints:   *Tray5     2True550   *MediaType Glossy Paper

*% Do not allow Envelope Media Type in 3000 Input Trays
*%UIConstraints:   *LowerTray 3True3000 *MediaType Env
*%UIConstraints:   *Tray3     3True3000 *MediaType Env
*%UIConstraints:   *Tray4     3True3000 *MediaType Env
*%UIConstraints:   *Tray5     3True3000 *MediaType Env

*% Do not allow Bond Media Type in 3000 Input Trays
*%UIConstraints:   *LowerTray 3True3000 *MediaType Bond
*%UIConstraints:   *Tray3     3True3000 *MediaType Bond
*%UIConstraints:   *Tray4     3True3000 *MediaType Bond
*%UIConstraints:   *Tray5     3True3000 *MediaType Bond


*% Do not allow Bond Media Type in MP Feeder
*%UIConstraints:   *InputSlot MultiPurpose      *MediaType Env
*%UIConstraints:   *MediaType Env               *InputSlot MultiPurpose

*%UIConstraints:   *InputSlot Manual    *MediaType Env
*%UIConstraints:   *MediaType Env               *InputSlot Manual

*%UIConstraints:   *InputSlot ManualEnv    *MediaType Env
*%UIConstraints:   *MediaType Env               *InputSlot ManualEnv


*% Transparency Media Type can not be fed out in Top Output Bin.
*UIConstraints:   *OutputBin Top                *MediaType Transparency
*UIConstraints:   *MediaType Transparency       *OutputBin Top



*%UIConstraints: *ManualFeed True      *MediaType Env
*UIConstraints: *InputSlot Manual      *MediaType Env
*% Duplexing restricts Transparency media type.
*UIConstraints: *Duplex DuplexNoTumble   *UserMediaType 2
*UIConstraints: *Duplex DuplexTumble     *UserMediaType 2

*% Do not allow Japanese Media to be Duplexed
*UIConstraints: *PaperSize  Hagaki               *Duplex
*UIConstraints: *PaperSize  Ohfuku.Hagaki        *Duplex
*UIConstraints: *PaperSize  Envelope.Long3       *Duplex
*UIConstraints: *PaperSize  Envelope.Long4       *Duplex
*UIConstraints: *PaperSize  Envelope.Long40      *Duplex
*UIConstraints: *PaperSize  Envelope.Square4     *Duplex
*UIConstraints: *PaperSize  Envelope.SquareA4    *Duplex

*% === Basic Capabilities ============

*LanguageLevel: "3"
*Protocols: PJL TBCP
*FreeVM: "2058000"
*VMOption 64Meg/64 MB Printer Memory:                 "2058000"
*VMOption 128Meg/128 MB Printer Memory:               "2058000"
*VMOption 192Meg/192 MB Printer Memory:               "2058000"
*VMOption 256Meg/256 MB Printer Memory:               "2058000"
*VMOption 320Meg/320 MB Printer Memory:               "2058000"
*VMOption 384Meg/384 MB Printer Memory:               "2058000"
*VMOption 448Meg/448 MB Printer Memory:               "2058000"
*VMOption 512Meg/512 or more MB Printer Memory:       "2058000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*TTRasterizer:  Type42
*?TTRasterizer:""
*FileSystem: True
*?FileSystem: ""
*VariablePaperSize: True
*Throughput: "28"
*Password: "0"
*ExitServer: "
count 0 eq   % is the password on the stack?
{ true }
{ dup        % potential password
  statusdict /checkpassword get exec not
} ifelse
{  %  if no password or not valid
  (WARNING : Cannot perform the exitserver command.) =
  (Password supplied is not valid.) =
  (Please contact the author of this software.) = flush
  quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq  % is the password on the stack?
{ true }
{ dup      % potential password
  statusdict /checkpassword get exec not
} ifelse
{  %  if no password or not valid
  (WARNING : Cannot reset printer.) =
  (Password supplied is not valid.) =
  (Please contact the author of this software.) = flush
  quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*JobPatchFile 1: "
 /oldresourcestatus /resourcestatus load def
 /resourcestatus {dup /FontType eq
 {1 index 32 eq {pop pop false} {oldresourcestatus} ifelse }
 {oldresourcestatus} ifelse } bind def
"
*End
*% === Job Control Language ==

*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"

*% === Resolution ============

*OpenUI *Resolution/Resolution: PickOne
*DefaultResolution: 600dpi
*OrderDependency: 100 AnySetup *Resolution
*Resolution 600dpi/2400 Image Quality: "<< /HWResolution [600 600] >> setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get 0 get
(     ) cvs print (dpi) = flush
restore
"
*End
*CloseUI: *Resolution

*% === Halftone Information ===============

*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*ResScreenFreq  600dpi:   "60.0"
*ResScreenAngle 600dpi:   "45.0"

*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Factory
*Transfer Factory: "{ }"
*Transfer Factory.Inverse: "{ 1 exch sub }"

*% === Features ===
*JCLOpenUI *JCLTonerDarkness/Toner Darkness: PickOne
*DefaultJCLTonerDarkness: None
*OrderDependency: 20 JCLSetup  *JCLTonerDarkness
*JCLTonerDarkness None/Printer Setting: ""
*JCLTonerDarkness 1/1: "@PJL SET ECONOMODE = ON <0A>@PJL SET DENSITY = 1 <0A>"
*JCLTonerDarkness 2/2: "@PJL SET ECONOMODE = ON <0A>@PJL SET DENSITY = 2 <0A>"
*JCLTonerDarkness 3/3: "@PJL SET ECONOMODE = ON <0A>@PJL SET DENSITY = 3 <0A>"
*JCLTonerDarkness 4/4: "@PJL SET ECONOMODE = ON <0A>@PJL SET DENSITY = 4 <0A>"
*JCLTonerDarkness 5/5: "@PJL SET ECONOMODE = ON <0A>@PJL SET DENSITY = 5 <0A>"
*JCLCloseUI: *JCLTonerDarkness

*JCLOpenUI *JCLLXImageSmoothing/Image Smoothing: PickOne
*DefaultJCLLXImageSmoothing: PrtSet
*OrderDependency: 20 JCLSetup  *JCLLXImageSmoothing
*JCLLXImageSmoothing PrtSet/Printer Setting: ""
*JCLLXImageSmoothing False/Off: "@PJL SET LIMAGESMOOTHING = OFF<0A>"
*JCLLXImageSmoothing True/On:   "@PJL SET LIMAGESMOOTHING = ON<0A>"
*JCLCloseUI: *JCLLXImageSmoothing
*OpenUI *MediaType/Media Type: PickOne
*DefaultMediaType: None
*OrderDependency: 140 AnySetup *MediaType
*MediaType None/Printer Setting: ""
*MediaType Plain/Plain Paper:           "<< /MediaType (Plain) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Card/Card Stock:             "<< /MediaType (Card Stock) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Transparency/Transparency:   "<< /MediaType (Transparency) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Labels/Labels:               "<< /MediaType (Labels) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Bond/Bond:                   "<< /MediaType (Bond) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Letterhead/Letterhead:       "<< /MediaType (Letterhead) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Preprint/Preprinted:         "<< /MediaType (Preprinted) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Color/Colored Paper:         "<< /MediaType (Color) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Env/Envelope:                "<< /MediaType (Envelope) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Glossy/Glossy Paper:   "<< /MediaType (Glossy Paper) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom1/Custom Type 1:       "<< /MediaType (Custom Type 1) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom2/Custom Type 2:       "<< /MediaType (Custom Type 2) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom3/Custom Type 3:       "<< /MediaType (Custom Type 3) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom4/Custom Type 4:       "<< /MediaType (Custom Type 4) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom5/Custom Type 5:       "<< /MediaType (Custom Type 5) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom6/Custom Type 6:       "<< /MediaType (Custom Type 6) /Policies << /MediaType 2 >> >> setpagedevice"
*CloseUI: *MediaType


*OpenUI *Duplex/Duplex: PickOne
*DefaultDuplex: None
*OrderDependency: 40 AnySetup *Duplex
*Duplex None/Simplex: "<< /Duplex false >> setpagedevice"
*Duplex DuplexNoTumble/Duplex - Long Edge: "
statusdict /duplexer get exec
 { << /Duplex true /Tumble false >> setpagedevice }
 { << /Duplex false >> setpagedevice }
 ifelse
"
*End
*Duplex DuplexTumble/Duplex - Short Edge: "
statusdict /duplexer get exec
{ << /Duplex true /Tumble true >> setpagedevice }
{ << /Duplex false >> setpagedevice }
ifelse
"
*End

*?Duplex: "
save
currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *Duplex

*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne
*DefaultJCLPortRotation: None
*OrderDependency: 10 JCLSetup  *JCLPortRotation
*JCLPortRotation None/Printer Setting: ""
*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"
*JCLCloseUI: *JCLPortRotation
*% === Finishing Group ==========================================
*OpenGroup: Finishing/Finishing

*OpenUI *Collate/Collate Copies: Boolean
*DefaultCollate: False
*OrderDependency: 150 AnySetup *Collate
*Collate False/Off: "<< /Collate false >> setpagedevice"
*Collate True/On: "<< /Collate true >> setpagedevice"
*CloseUI: *Collate



*OpenUI *OutputBin/Output Bin: PickOne
*DefaultOutputBin: None
*OrderDependency:  45 AnySetup *OutputBin
*OutputBin None/Printer Setting:""
*OutputBin Top/Standard Bin:   "<< /OutputAttributes << /Priority [0] >> >> setpagedevice"
*OutputBin Rear/Bin 1: "<< /OutputAttributes << /Priority [1] >> >> setpagedevice"
*CloseUI: *OutputBin

*CloseGroup: Finishing
*OpenUI *ColorCorrection/Color Correction: PickOne
*OrderDependency: 140 AnySetup *ColorCorrection
*DefaultColorCorrection: None
*ColorCorrection None/Printer Setting: ""
*ColorCorrection Auto/Auto: "
 << /DeviceRenderingInfo << /Type 102 /ColorCorrection Automatic >>
 /ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*ColorCorrection Vivid/Vivid: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection /Vivid >>
/ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*ColorCorrection Off/Off: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection Off >>
/ProcessColorModel /DeviceGray >> setpagedevice"
*End
*ColorCorrection CMYK/CMYK: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection SWOP >>
/ProcessColorModel /DeviceCMYK >> setpagedevice"
*End
*ColorCorrection Display/Display: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection /Display >>
/ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*ColorCorrection Manual/Manual: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection /Manual >>
/ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*?ColorCorrection: "
save statusdict begin
[(Auto) (Vivid) (Off) (CMYK) (Display) (Manual)]
colorcorrection 1 sub get = flush
end
restore"
*End
*CloseUI: *ColorCorrection


*% === Paper  ==========================================
*LandscapeOrientation: Plus90

*OpenUI *PageSize:  PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageSize Legal/Legal: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageSize B5/B5: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageSize A4/A4: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageSize Executive/Executive: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageSize A5/A5: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*End
*PageSize B4/B4: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [729 1032] /ImagingBBox null >> setpagedevice"
*End
*PageSize A3/A3: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [842 1191] /ImagingBBox null >> setpagedevice"
*End
*PageSize Tabloid/Tabloid: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [792 1224] /ImagingBBox null >> setpagedevice"
*End
*PageSize Folio/Folio: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 936] /ImagingBBox null /ManualFeed false >> setpagedevice"
*End
*PageSize Statement/Statement: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [396 612] /ImagingBBox null /ManualFeed false >> setpagedevice"
*End
*PageSize Monarch/7 3/4 Envelope 3 7/8 x 7 1/2 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageSize C9/9 Envelope 3 7/8 x 8 7/8 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageSize Comm10/10 Envelope 4 1/8 x 9 1/2 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageSize DL/DL Envelope 110 x 220 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageSize C5/C5 Envelope 162 x 229 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*PageSize ISOB5/B5 Envelope 176 x 250 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*End
*%PageSize Other: "
*% << /Policies << /PageSize 2 >> >> setpagedevice
*% << /PageSize [612 996] /ImagingBBox null >> setpagedevice"
*%End
*?PageSize: "
save
17 dict
  dup /letter (Letter) put
  dup /legal (Legal) put
  dup /executivepage (Executive) put
  dup /a4 (A4) put
  dup /a5 (A5) put
  dup /b5 (B5) put
  dup /b4 (B4) put
  dup /a3 (A3) put
  dup /tabloid (Tabloid) put
  dup /folio (Folio) put
  dup /statement (Statement) put
  dup /3.875x7.5envelope (Monarch) put
  dup /3.875x8.875envelope (C9) put
  dup /4.125x9.5envelope (Comm10) put
  dup /110x220envelope (DL) put
  dup /162x229envelope (C5) put
  dup /176x250envelope (Envelope.499.709) put
  dup /otherenvelope (Envelope.612.996) put
statusdict /papersize get exec
3 1 roll  {get} stopped {(Unknown)}if
exch  not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer.
*% Usually used with input source selection rather than selection by size (AutoSelect).

*OpenUI *PageRegion:  PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "
<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Legal: "
<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B5: "
<< /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A4: "
<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Executive: "
<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A5: "
<< /PageSize [419 595] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B4: "
<< /PageSize [729 1032] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A3: "
<< /PageSize [842 1191] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Tabloid: "
<< /PageSize [792 1224] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Folio: "
<< /PageSize [612 936] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Statement: "
<< /PageSize [396 612] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Monarch: "
<< /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageRegion C9: "
<< /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Comm10: "
<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageRegion DL: "
<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageRegion C5: "
<< /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*PageRegion ISOB5: "
<< /PageSize [499 708] /ImagingBBox null >> setpagedevice"
*End
*CloseUI: *PageRegion
*% Note the dimensions for A4 paper and all envelopes are different than Wrigley
*%OpenUI *ImageableArea/Form Type: PickOne

*% **** Printable Area by key word ****
*DefaultImageableArea: Letter
*ImageableArea Letter:                  "13 13 596 780"
*ImageableArea Legal:                   "12 15 596 995"
*ImageableArea B5:                      "13 13 505 716"
*ImageableArea A4:                      "10 13 588 829"
*ImageableArea Executive:               "13 13 510 744"
*ImageableArea A5:                      "13 13 407 583"
*ImageableArea B4:                      "13 13 716 1019"
*ImageableArea A3:                      "12 15 827 1170"
*ImageableArea Tabloid:                 "13 13 779 1210"
*ImageableArea Folio:                  "12 13 596 921"
*ImageableArea Statement:               "12 12 384 600"
*ImageableArea Monarch:                 "13 13 266 526"
*ImageableArea C9:                      "13 13 266 624"
*ImageableArea Comm10:                 "13 13 284 668"
*ImageableArea DL:                     "13 13 296 608"
*ImageableArea C5:                      "13 13 445 634"
*ImageableArea ISOB5:                  "13 13 486 694"
*?ImageableArea: "
save
/cvp { cvi (            ) cvs print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat flush
restore
"
*End

*%CloseUI: *ImageableArea

*% **** Physical paper dimensions by key word ****

*DefaultPaperDimension: Letter
*PaperDimension Letter:    "612 792"
*PaperDimension Legal:     "612 1008"
*PaperDimension B5:        "516 729"
*PaperDimension A4:        "595 842"
*PaperDimension Executive: "522 756"
*PaperDimension A5:        "419 595"
*PaperDimension B4:        "729 1032"
*PaperDimension A3:        "842 1191"
*PaperDimension Tabloid:   "792 1224"
*PaperDimension Folio:     "612 936"
*PaperDimension Statement: "396 612"
*PaperDimension Monarch:   "279 540"
*PaperDimension C9:        "279 639"
*PaperDimension Comm10:    "297 684"
*PaperDimension DL:        "312 624"
*PaperDimension C5:        "459 649"
*PaperDimension ISOB5:     "499 708"


*CustomPageSize True:  "
pop pop pop
/CustomPageSize 2 dict dup
         /PageSize [
         7 -2 roll
         ] put dup /ImagingBBox null put
         def"
*End
*ParamCustomPageSize   Width:           1 points 255  842
*ParamCustomPageSize   Height:          2 points 420 1224
*ParamCustomPageSize   WidthOffset:     3 points 0   0
*ParamCustomPageSize   HeightOffset:    4 points 0   0
*ParamCustomPageSize   Orientation:     5 int    0   0

*MaxMediaWidth:  "842"
*MaxMediaHeight: "1224"

*HWMargins: 12 12 12 12
*RequiresPageRegion All: True

*% === Input Trays =======================================

*OpenUI *InputSlot:  PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Tray1
*InputSlot Tray1/Tray 1: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
currentpagedevice /InputAttributes get 0 get setpagedevice
<< /InputAttributes << /Priority [0] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot Tray2/Tray 2: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot Tray3/Tray 3: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 3 known { 3 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot Tray4/Tray 4: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 5 known { 5 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot Tray5/Tray 5: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 6 known { 6 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot MultiPurpose/MP Feeder: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 4 known { 4 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 7 >> >> setpagedevice"
*End
*InputSlot Manual/Manual Paper: "
<< /ManualFeed true /MediaPosition null >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot ManualEnv/Manual Envelope: "
<< /ManualFeed true /MediaPosition null >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*?InputSlot: "
save
[ (Tray1) (Tray2) (MultiPurpose) (Manual) (ManualEnv) (Tray3) (Tray4) (Tray5) ]
statusdict /papertray get exec
{get exec} stopped { pop pop (Unknown) } if = flush
restore
"
*End

*CloseUI: *InputSlot

*% === Font Information ==========================================

*DefaultFont: Courier
*Font Courier: Standard "(001.000)" Standard ROM
*Font Courier-Bold: Standard "(001.000)" Standard ROM
*Font Courier-Oblique: Standard "(001.000)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
*Font Times-Roman: Standard "(001.000)" Standard ROM
*Font Times-Bold: Standard "(001.000)" Standard ROM
*Font Times-Italic: Standard "(001.000)" Standard ROM
*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
*Font Helvetica: Standard "(001.000)" Standard ROM
*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.000)" Standard ROM
*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
*Font Bookman-Demi: Standard "(001.000)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
*Font Bookman-Light: Standard "(001.000)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
*Font Helvetica-Light: Standard "(001.000)" Standard ROM
*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Black: Standard "(001.000)" Standard ROM
*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
*Font Palatino-Roman: Standard "(001.000)" Standard ROM
*Font Palatino-Bold: Standard "(001.000)" Standard ROM
*Font Palatino-Italic: Standard "(001.000)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM

*?FontQuery: "
save
4 dict begin
 /sv exch def
 /str (fonts/                              ) def
 /st2 128 string def
 { count 0 gt
  { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
   {pop (Yes)}
   { str exch st2 cvs dup length /len exch def
    6 exch putinterval str 0 len 6 add getinterval mark exch
    { } st2 filenameforall counttomark 0 gt
    { cleartomark (Yes)}{cleartomark (No)}ifelse
   }ifelse = flush
  }{ exit } ifelse
 } bind loop
 (*) = flush
 sv
end
restore
"
*End

*?FontList: "
save
2 dict begin
 /sv exch def
 /str 128 string def
 FontDirectory { pop == } bind forall flush
 /filenameforall where
 { pop save (fonts/*)
  { dup length 6 sub 6 exch getinterval cvn == } bind
  str filenameforall flush restore
 } if
 (*) = flush

 sv
end
restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%  exitserver: permanent state may be changed  %%"
*Message: "%%  Flushing: rest of job (to end-of-file) will be ignored  %%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%  status: <one of these> %% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "not ready"

*% Input Sources (format: %%  status: <stat>; source: <one of these>  %% )
*Source: "Serial"
*Source: "Parallel"
*Source: "Network"

*% Printer Error (format: %%  PrinterError: <one of these>  %%)
*PrinterError: "Paper Jam"
*PrinterError: "Wrong Paper Length"
*PrinterError: "Invalid Manual Insertion"
*PrinterError: "Change Size in Feeder"
*PrinterError: "Change Size in Tray 1"
*PrinterError: "Change Size in Tray 2"
*PrinterError: "Paper Out or Feed Failure - Feed"
*PrinterError: "Load Manual Envelope"
*PrinterError: "Paper Out or Feed Failure - Tray 1"
*PrinterError: "Paper Out or Feed Failure - Tray 2"
*PrinterError: "Load Manual Paper"
*PrinterError: "Output Bin Full"
*PrinterError: "Cover Open/Cartridge Not Installed"
*PrinterError: "Insufficient Memory"
*PrinterError: "Complex Page"
*PrinterError: "Default Storage Error"
*PrinterError: "Defective Font Card Installed"
*PrinterError: "Flash Full"
*PrinterError: "ioerror"
*PrinterError: "Flash Error"
*PrinterError: "Duplex Not Attached"
*PrinterError: "Duplex Cover Open"
*PrinterError: "Scheduled Maintenance"
*PrinterError: "Toner Low"
*PrinterError: "Service Error"

*% === Color Separation Information =====================

*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*%  For 53 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*%  For 85 lpi / 600 dpi  5,5,2,6,6,2,20/3,0) =====================

*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"

*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End

*%  For 71 lpi / 600 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"

*% For 116 lpi / 1200 dpi ===================================================

*ColorSepScreenAngle ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
*ColorSepScreenFreq CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
*ColorSepScreenFreq ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "100.0"
*% End of PPD file for Lexmark C910 Laser Printers