*PPD-Adobe: "4.2"
*% Adobe PostScript(R) Printer Description File
*% For Lexmark C750 Laser Printers
*% Produced by Lexmark International, Inc.
*%
*% For use with Adobe PostScript Driver ver 3.0.1 or similar printer drivers
*%
*% Copyright (c) 2001-2002 Lexmark International Inc. All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*FormatVersion: "4.2"
*FileVersion: "1.1"
*LanguageVersion: English
*LanguageEncoding: WindowsANSI
*PCFileName: "LEXC750.PPD"
*Product: "(Lexmark C750 Laser Printer)"
*PSVersion: "(3010)"
*ModelName: "Lexmark C750 Laser Printer"
*ShortNickName: "Lexmark C750 PS"
*NickName: "Lexmark C750 PS"
*% ======== Installable Options ============
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *LowerTray/Tray 2 - Option: PickOne
*DefaultLowerTray: False
*LowerTray False/Not Installed: ""
*LowerTray 1True500/500-Sheet Drawer: ""
*LowerTray 2True2000/2000-Sheet Drawer: ""
*CloseUI: *LowerTray
*OpenUI *Tray3/Tray 3 - Option: PickOne
*DefaultTray3: False
*Tray3 False/Not Installed: ""
*Tray3 1True500/500-Sheet Drawer: ""
*Tray3 2True2000/2000-Sheet Drawer: ""
*CloseUI: *Tray3
*OpenUI *Tray4/Tray 4 - Option: PickOne
*DefaultTray4: False
*Tray4 False/Not Installed: ""
*Tray4 1True500/500-Sheet Drawer: ""
*%Tray4 2True2000/2000-Sheet Drawer: ""
*CloseUI: *Tray4
*OpenUI *MPFeeder/MP Feeder - Option: Boolean
*DefaultMPFeeder: True
*MPFeeder True/Installed: ""
*MPFeeder False/Not Installed: ""
*CloseUI: *MPFeeder
*OpenUI *OutputBins/Number of Output Bins - Option: PickOne
*DefaultOutputBins: False
*OutputBins False/Standard Bin Only: ""
*OutputBins 1.1Bin/1 - Output Expander: ""
*%OutputBins 1.2Bin/1 - Finisher Option: ""
*%OutputBins 2Bin/2 - 1 Finisher Option + 1 Output Expander: ""
*OutputBins 5Bin/5 - 5-Bin Mailbox: ""
*%OutputBins 6Bin/6 - 1 Finisher Option + 1 5-Bin Mailbox: ""
*CloseUI: *OutputBins
*OpenUI *Duplexer/Duplex Option - Option: Boolean
*DefaultDuplexer: False
*Duplexer True/Installed: ""
*Duplexer False/Not Installed: ""
*CloseUI: *Duplexer
*OpenUI *Flash/Flash Memory Card - Option: Boolean
*DefaultFlash: False
*Flash True/Installed: ""
*Flash False/Not Installed: ""
*CloseUI: *Flash
*OpenUI *HardDisk/Printer Hard Disk - Option: Boolean
*DefaultHardDisk: False
*HardDisk True/Installed: ""
*HardDisk False/Not Installed: ""
*CloseUI: *HardDisk
*OpenUI *InstalledMemory/Printer Memory - Option: PickOne
*DefaultInstalledMemory: 64Meg
*InstalledMemory 64Meg/64 MB Printer Memory: ""
*InstalledMemory 128Meg/128 MB Printer Memory: ""
*InstalledMemory 192Meg/192 MB Printer Memory: ""
*InstalledMemory 256Meg/256 MB Printer Memory: ""
*%InstalledMemory 288Meg/288 MB Printer Memory: ""
*InstalledMemory 320Meg/320 MB Printer Memory: ""
*InstalledMemory 384Meg/384 MB Printer Memory: ""
*InstalledMemory 448Meg/448 MB Printer Memory: ""
*InstalledMemory 512Meg/512 or more MB Printer Memory: ""
*CloseUI: *InstalledMemory
*OpenUI *FaxCard/Fax Card: Boolean
*DefaultFaxCard: False
*FaxCard True/Installed: ""
*FaxCard False/Not Installed: ""
*CloseUI: *FaxCard
*CloseGroup: InstallableOptions
*%=========== User Constraints ===================
*UIConstraints: *LowerTray False *InputSlot Tray2
*UIConstraints: *Tray3 False *InputSlot Tray3
*UIConstraints: *Tray4 False *InputSlot Tray4
*UIConstraints: *Duplexer False *Duplex
*UIConstraints: *LowerTray False *InputSlot Tray3
*UIConstraints: *LowerTray False *InputSlot Tray4
*UIConstraints: *Tray3 False *InputSlot Tray4
*UIConstraints: *MPFeeder False *InputSlot MultiPurpose
*UIConstraints: *MPFeeder False *InputSlot Manual
*UIConstraints: *MPFeeder False *InputSlot ManualEnv
*% Make sure previous tray is installed before next tray is allowed
*UIConstraints: *LowerTray False *Tray3 1True500
*UIConstraints: *LowerTray False *Tray4 1True500
*UIConstraints: *LowerTray False *Tray3 2True2000
*UIConstraints: *Tray3 False *Tray4 1True500
*%UIConstraints: *Tray3 False *Tray4 2True2000
*% Allow only 1 2000-sheet drawer and only 1 500-sheet drawer when a
*% 2000-sheet drawer is installed.
*UIConstraints: *LowerTray 2True2000 *Tray3 2True2000
*UIConstraints: *LowerTray 2True2000 *Tray3 1True500
*UIConstraints: *LowerTray 2True2000 *Tray4 1True500
*%UIConstraints: *Tray3 1True500 *Tray4 2True2000
*UIConstraints: *Tray3 2True2000 *LowerTray 2True2000
*%UIConstraints: *Tray3 2True2000 *Tray4 2True2000
*UIConstraints: *Tray3 2True2000 *Tray4 1True500
*UIConstraints: *Tray4 1True500 *LowerTray 2True2000
*UIConstraints: *Tray4 1True500 *Tray3 2True2000
*UIConstraints: *OutputBins False *OutputBin Bin1
*UIConstraints: *OutputBins False *OutputBin Bin2
*UIConstraints: *OutputBins False *OutputBin Bin3
*UIConstraints: *OutputBins False *OutputBin Bin4
*UIConstraints: *OutputBins False *OutputBin Bin5
*%UIConstraints:*OutputBins False *OutputBin Bin6
*UIConstraints: *OutputBins 1.1Bin *OutputBin Bin2
*UIConstraints: *OutputBins 1.1Bin *OutputBin Bin3
*UIConstraints: *OutputBins 1.1Bin *OutputBin Bin4
*UIConstraints: *OutputBins 1.1Bin *OutputBin Bin5
*%UIConstraints: *OutputBins 1.1Bin *OutputBin Bin6
*%UIConstraints: *OutputBins 1.2Bin *OutputBin Bin2
*%UIConstraints: *OutputBins 1.2Bin *OutputBin Bin3
*%UIConstraints: *OutputBins 1.2Bin *OutputBin Bin4
*%UIConstraints: *OutputBins 1.2Bin *OutputBin Bin5
*%UIConstraints: *OutputBins 1.2Bin *OutputBin Bin6
*%UIConstraints: *OutputBins 2Bin *OutputBin Bin3
*%UIConstraints: *OutputBins 2Bin *OutputBin Bin4
*%UIConstraints: *OutputBins 2Bin *OutputBin Bin5
*%UIConstraints: *OutputBins 2Bin *OutputBin Bin6
*%UIConstraints: *OutputBins 5Bin *OutputBin Bin6
*% Staple is ONLY supported when Finisher is installed.
*%UIConstraints: *OutputBins False *StapleLocation True
*%UIConstraints: *OutputBins 1.1Bin *StapleLocation True
*%UIConstraints: *OutputBins 5Bin *StapleLocation True
*% HolePunch is ONLY supported when Finisher is installed.
*%UIConstraints: *OutputBins False *HolePunch True
*%UIConstraints: *OutputBins 1.1Bin *HolePunch True
*%UIConstraints: *OutputBins 5Bin *HolePunch True
*% Offset is ONLY supported when Finisher is installed.
*%UIConstraints: *OutputBins False *Jog EndOfSet
*%UIConstraints: *OutputBins 1.1Bin *Jog EndOfSet
*%UIConstraints: *OutputBins 5Bin *Jog EndOfSet
*% The Offset function is only allowed to Bin1.
*%UIConstraints: *UserOutputBin False *Jog EndOfSet
*%UIConstraints: *UserOutputBin 2 *Jog EndOfSet
*%UIConstraints: *UserOutputBin 3 *Jog EndOfSet
*%UIConstraints: *UserOutputBin 4 *Jog EndOfSet
*%UIConstraints: *UserOutputBin 5 *Jog EndOfSet
*%UIConstraints: *UserOutputBin 6 *Jog EndOfSet
*UIConstraints: *InputSlot Tray1 *PageSize A3
*UIConstraints: *InputSlot Tray1 *PageSize Monarch
*UIConstraints: *InputSlot Tray1 *PageSize C9
*UIConstraints: *InputSlot Tray1 *PageSize Comm10
*UIConstraints: *InputSlot Tray1 *PageSize DL
*UIConstraints: *InputSlot Tray1 *PageSize C5
*UIConstraints: *InputSlot Tray1 *PageSize B4
*UIConstraints: *InputSlot Tray1 *PageSize ISOB5
*UIConstraints: *InputSlot Tray1 *MediaType Env
*% Do not allow envelope and paper sizes to be fed from Tray2
*% when auto size sensing for Tray2 is turned OFF in the Config Menu.
*UIConstraints: *InputSlot Tray2 *PageSize ISOB5
*UIConstraints: *InputSlot Tray2 *PageSize C9
*UIConstraints: *InputSlot Tray2 *PageSize Comm10
*UIConstraints: *InputSlot Tray2 *PageSize DL
*UIConstraints: *InputSlot Tray2 *PageSize C5
*UIConstraints: *InputSlot Tray2 *PageSize Monarch
*%UIConstraints: *InputSlot Tray2 *MediaType Env
*%UIConstraints: *Tray3 2True2000 *PageSize Folio
*%UIConstraints: *Tray3 2True2000 *PageSize Statement
*%*UIConstraints: *Tray3 2True2000 *PageSize Universal
*UIConstraints: *InputSlot Tray3 *PageSize ISOB5
*UIConstraints: *InputSlot Tray3 *PageSize C9
*UIConstraints: *InputSlot Tray3 *PageSize Comm10
*UIConstraints: *InputSlot Tray3 *PageSize DL
*UIConstraints: *InputSlot Tray3 *PageSize C5
*UIConstraints: *InputSlot Tray3 *PageSize Monarch
*%UIConstraints: *InputSlot Tray3 *MediaType Env
*%UIConstraints: *Tray4 2True2000 *PageSize Folio
*%UIConstraints: *Tray4 2True2000 *PageSize Statement
*%*UIConstraints: *Tray4 2True2000 *PageSize Universal
*UIConstraints: *InputSlot Tray4 *PageSize ISOB5
*UIConstraints: *InputSlot Tray4 *PageSize C9
*UIConstraints: *InputSlot Tray4 *PageSize Comm10
*UIConstraints: *InputSlot Tray4 *PageSize DL
*UIConstraints: *InputSlot Tray4 *PageSize C5
*UIConstraints: *InputSlot Tray4 *PageSize Monarch
*%UIConstraints: *InputSlot Tray4 *MediaType Env
*UIConstraints: *InputSlot ManualEnv *PageSize Letter
*UIConstraints: *InputSlot ManualEnv *PageSize Legal
*UIConstraints: *InputSlot ManualEnv *PageSize Folio
*UIConstraints: *InputSlot ManualEnv *PageSize Statement
*UIConstraints: *InputSlot ManualEnv *PageSize Executive
*%UIConstraints: *InputSlot ManualEnv *PageSize Universal
*UIConstraints: *InputSlot ManualEnv *PageSize A4
*UIConstraints: *InputSlot ManualEnv *PageSize A5
*UIConstraints: *InputSlot ManualEnv *PageSize B5
*UIConstraints: *InputSlot Manual *PageSize ISOB5
*UIConstraints: *InputSlot Manual *PageSize C9
*UIConstraints: *InputSlot Manual *PageSize Comm10
*UIConstraints: *InputSlot Manual *PageSize DL
*UIConstraints: *InputSlot Manual *PageSize C5
*UIConstraints: *InputSlot Manual *PageSize Monarch
*UIConstraints: *InputSlot Manual *MediaType Env
*UIConstraints: *PageSize A3 *InputSlot Tray1
*UIConstraints: *PageSize Monarch *InputSlot Tray1
*UIConstraints: *PageSize C9 *InputSlot Tray1
*UIConstraints: *PageSize Comm10 *InputSlot Tray1
*UIConstraints: *PageSize DL *InputSlot Tray1
*UIConstraints: *PageSize C5 *InputSlot Tray1
*UIConstraints: *PageSize B4 *InputSlot Tray1
*UIConstraints: *PageSize ISOB5 *InputSlot Tray1
*UIConstraints: *InputSlot Tray1 *MediaType Env
*% Do not allow envelope and paper sizes to be fed from Tray2
*% when auto size sensing for Tray2 is turned OFF in the Config Menu.
*%UIConstraints: *PageSize Folio *InputSlot Tray2
*%UIConstraints: *PageSize Statement *InputSlot Tray2
*%*UIConstraints: *PageSize Universal *InputSlot Tray2
*UIConstraints: *PageSize A3 *InputSlot Tray2
*UIConstraints: *PageSize B4 *InputSlot Tray2
*UIConstraints: *PageSize ISOB5 *InputSlot Tray2
*UIConstraints: *PageSize C9 *InputSlot Tray2
*UIConstraints: *PageSize Comm10 *InputSlot Tray2
*UIConstraints: *PageSize DL *InputSlot Tray2
*UIConstraints: *PageSize C5 *InputSlot Tray2
*UIConstraints: *PageSize Monarch *InputSlot Tray2
*UIConstraints: *InputSlot Tray2 *MediaType Env
*%UIConstraints: *PageSize Folio *InputSlot Tray3
*%UIConstraints: *PageSize Statement *InputSlot Tray3
*%UIConstraints: *PageSize Universal *InputSlot Tray3
*UIConstraints: *PageSize A3 *InputSlot Tray3
*UIConstraints: *PageSize B4 *InputSlot Tray3
*UIConstraints: *PageSize ISOB5 *InputSlot Tray3
*UIConstraints: *PageSize C9 *InputSlot Tray3
*UIConstraints: *PageSize Comm10 *InputSlot Tray3
*UIConstraints: *PageSize DL *InputSlot Tray3
*UIConstraints: *PageSize C5 *InputSlot Tray3
*UIConstraints: *PageSize Monarch *InputSlot Tray3
*UIConstraints: *InputSlot Tray3 *MediaType Env
*%UIConstraints: *PageSize Folio *InputSlot Tray4
*%UIConstraints: *PageSize Statement *InputSlot Tray4
*%*UIConstraints: *PageSize Universal *InputSlot Tray4
*UIConstraints: *PageSize A3 *InputSlot Tray4
*UIConstraints: *PageSize B4 *InputSlot Tray4
*UIConstraints: *PageSize ISOB5 *InputSlot Tray4
*UIConstraints: *PageSize C9 *InputSlot Tray4
*UIConstraints: *PageSize Comm10 *InputSlot Tray4
*UIConstraints: *PageSize DL *InputSlot Tray4
*UIConstraints: *PageSize C5 *InputSlot Tray4
*UIConstraints: *PageSize Monarch *InputSlot Tray4
*UIConstraints: *InputSlot Tray4 *MediaType Env
*UIConstraints: *MediaType Env *InputSlot Manual
*% Transparency is not supported in Tray2.
*%UIConstraints: *InputSlot Tray2 *MediaType Transparency
*% Glossy Paper is not supported in Tray 2,Tray 3, Tray 4.
*%UIConstraints: *InputSlot ManualEnv *MediaType Plain
*%UIConstraints: *InputSlot ManualEnv *MediaType Card
*%UIConstraints: *InputSlot ManualEnv *MediaType Transparency
*%UIConstraints: *InputSlot ManualEnv *MediaType Labels
*%UIConstraints: *InputSlot ManualEnv *MediaType Bond
*%UIConstraints: *InputSlot ManualEnv *MediaType Letterhead
*%UIConstraints: *InputSlot ManualEnv *MediaType Preprint
*%UIConstraints: *InputSlot ManualEnv *MediaType Color
*%UIConstraints: *InputSlot ManualEnv *MediaType Glossy
*%UIConstraints: *InputSlot Manual *MediaType Env
*% Since duplex option supports Letter, A4, Executive, and Legal only,
*% do not allow envelope sizes and the rest of the paper sizes to be duplexed.
*UIConstraints: *PageSize A5 *Duplex
*UIConstraints: *PageSize B5 *Duplex
*UIConstraints: *PageSize Universal *Duplex
*UIConstraints: *PageSize C9 *Duplex
*UIConstraints: *PageSize Comm10 *Duplex
*UIConstraints: *PageSize DL *Duplex
*UIConstraints: *PageSize C5 *Duplex
*UIConstraints: *PageSize ISOB5 *Duplex
*% Duplex option does not allow transparencies or cardstock.
*% If they are fed, they will be printed in simplex mode.
*UIConstraints: *MediaType Env *Duplex
*%UIConstraints: *MediaType Card *Duplex
*UIConstraints: *MediaType Transparency *Duplex
*% Duplexer requires Tray2(Tray2) to be installed.
*UIConstraints: *Duplexer True *Tray2 False
*% === Basic Capabilities ============
*LanguageLevel: "3"
*Protocols: PJL TBCP
*FreeVM: "2058000"
*VMOption 64Meg/64 MB Printer Memory: "2058000"
*VMOption 128Meg/128 MB Printer Memory: "2058000"
*VMOption 192Meg/192 MB Printer Memory: "2058000"
*VMOption 256Meg/256 MB Printer Memory: "2058000"
*%VMOption 288Meg/288 MB Printer Memory: "2058000"
*VMOption 320Meg/320 MB Printer Memory: "2058000"
*VMOption 384Meg/384 MB Printer Memory: "2058000"
*VMOption 448Meg/448 MB Printer Memory: "2058000"
*VMOption 512Meg/512 or more MB Printer Memory: "2058000"
*ColorDevice: True
*DefaultColorSpace: CMYK
*TTRasterizer: Type42
*?TTRasterizer:""
*FileSystem: True
*?FileSystem: ""
*VariablePaperSize: True
*Throughput: "24"
*Password: "0"
*ExitServer: "
count 0 eq % is the password on the stack?
{ true }
{ dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq % is the password on the stack?
{ true }
{ dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*% === Job Control Language ==
*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"
*% === Print Resolution ============
*OpenUI *Resolution/Resolution: PickOne
*DefaultResolution: 600dpi
*OrderDependency: 100 AnySetup *Resolution
*Resolution 1200dpi/1200 dpi: "<< /HWResolution [1200 1200] >> setpagedevice"
*Resolution 600dpi/2400 Image Quality: "<< /HWResolution [600 600] >> setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get 0 get
( ) cvs print (dpi) = flush
restore
"
*End
*CloseUI: *Resolution
*% === Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*ResScreenFreq 600dpi: "60.0"
*ResScreenAngle 600dpi: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Factory
*Transfer Factory: "{ }"
*Transfer Factory.Inverse: "{ 1 exch sub }"
*% === Features ===
*JCLOpenUI *JCLTonerDarkness/Toner Darkness: PickOne
*DefaultJCLTonerDarkness: 4
*OrderDependency: 20 JCLSetup *JCLTonerDarkness
*JCLTonerDarkness None/Printer Setting: ""
*JCLTonerDarkness 1/1: "@PJL SET DENSITY = 1 <0A>"
*JCLTonerDarkness 2/2: "@PJL SET DENSITY = 2 <0A>"
*JCLTonerDarkness 3/3: "@PJL SET DENSITY = 3 <0A>"
*JCLTonerDarkness 4/4: "@PJL SET DENSITY = 4 <0A>"
*JCLTonerDarkness 5/5: "@PJL SET DENSITY = 5 <0A>"
*JCLCloseUI: *JCLTonerDarkness
*JCLOpenUI *JCLLXImageSmoothing/Image Smoothing: PickOne
*DefaultJCLLXImageSmoothing: PrtSet
*OrderDependency: 20 JCLSetup *JCLLXImageSmoothing
*JCLLXImageSmoothing PrtSet/Printer Setting: ""
*JCLLXImageSmoothing False/Off: "@PJL SET LIMAGESMOOTHING = OFF<0A>"
*JCLLXImageSmoothing True/On: "@PJL SET LIMAGESMOOTHING = ON<0A>"
*JCLCloseUI: *JCLLXImageSmoothing
*OpenUI *MediaType/Media Type: PickOne
*DefaultMediaType: None
*OrderDependency: 140 AnySetup *MediaType
*MediaType None/Printer Setting: ""
*MediaType Plain/Plain Paper: "<< /MediaType (Plain) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Card/Card Stock: "<< /MediaType (Card Stock) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Transparency/Transparency: "<< /MediaType (Transparency) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Glossy/Glossy Paper: "<< /MediaType (Glossy Paper) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Labels/Labels: "<< /MediaType (Labels) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Bond/Bond: "<< /MediaType (Bond) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Letterhead/Letterhead: "<< /MediaType (Letterhead) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Preprint/Preprinted: "<< /MediaType (Preprinted) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Color/Colored Paper: "<< /MediaType (Color) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Env/Envelope: "<< /MediaType (Envelope) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom1/Custom Type 1: "<< /MediaType (Custom Type 1) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom2/Custom Type 2: "<< /MediaType (Custom Type 2) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom3/Custom Type 3: "<< /MediaType (Custom Type 3) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom4/Custom Type 4: "<< /MediaType (Custom Type 4) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom5/Custom Type 5: "<< /MediaType (Custom Type 5) /Policies << /MediaType 2 >> >> setpagedevice"
*MediaType Custom6/Custom Type 6: "<< /MediaType (Custom Type 6) /Policies << /MediaType 2 >> >> setpagedevice"
*CloseUI: *MediaType
*OpenUI *Duplex/Duplex: PickOne
*DefaultDuplex: None
*OrderDependency: 40 AnySetup *Duplex
*Duplex None/Simplex: "<< /Duplex false >> setpagedevice"
*Duplex DuplexNoTumble/Duplex - Long Edge: "
statusdict /duplexer get exec
{ << /Duplex true /Tumble false >> setpagedevice }
{ << /Duplex false >> setpagedevice }
ifelse
"
*End
*Duplex DuplexTumble/Duplex - Short Edge: "
statusdict /duplexer get exec
{ << /Duplex true /Tumble true >> setpagedevice }
{ << /Duplex false >> setpagedevice }
ifelse
"
*End
*?Duplex: "
save
currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *Duplex
*JCLOpenUI *JCLPortRotation/Port Rotation: PickOne
*DefaultJCLPortRotation: None
*OrderDependency: 10 JCLSetup *JCLPortRotation
*JCLPortRotation None/Printer Setting: ""
*JCLPortRotation True/On: "@PJL LPORTROTATE<0A>"
*JCLCloseUI: *JCLPortRotation
*OpenUI *Collate/Collate Copies: PickOne
*DefaultCollate: PrtSet
*OrderDependency: 150 AnySetup *Collate
*Collate PrtSet/Printer Setting: ""
*Collate False/Off: "<< /Collate false >> setpagedevice"
*Collate True/On: "<< /Collate true >> setpagedevice"
*CloseUI: *Collate
*OpenUI *OutputBin/Output Bin: PickOne
*DefaultOutputBin: PrtSet
*OrderDependency: 45 AnySetup *OutputBin
*OutputBin PrtSet/Printer Setting:""
*OutputBin False/Standard Bin: "<< /OutputAttributes << /Priority [0] >> >> setpagedevice"
*OutputBin Bin1/Bin 1: "<< /OutputAttributes << /Priority [1] >> >> setpagedevice"
*OutputBin Bin2/Bin 2: "<< /OutputAttributes << /Priority [2] >> >> setpagedevice"
*OutputBin Bin3/Bin 3: "<< /OutputAttributes << /Priority [3] >> >> setpagedevice"
*OutputBin Bin4/Bin 4: "<< /OutputAttributes << /Priority [4] >> >> setpagedevice"
*OutputBin Bin5/Bin 5: "<< /OutputAttributes << /Priority [5] >> >> setpagedevice"
*%OutputBin Bin6/Bin 6: "<< /OutputAttributes << /Priority [6] >> >> setpagedevice"
*CloseUI: *OutputBin
*%OpenUI *StapleLocation/Staple: PickOne
*%DefaultStapleLocation: PrtSet
*%OrderDependency: 170 AnySetup *StapleLocation
*%StapleLocation PrtSet/Printer Setting: ""
*%StapleLocation False/Off: "<< /Staple 0 >> setpagedevice"
*%StapleLocation True/On: "<< /Staple 3 >> setpagedevice"
*%CloseUI: *StapleLocation
*%OpenUI *HolePunch/Hole Punch: PickOne
*%DefaultHolePunch: PrtSet
*%OrderDependency: 170 AnySetup *HolePunch
*%HolePunch PrtSet/Printer Setting: ""
*%HolePunch None/Off: "<< /Punch 0 >> setpagedevice"
*%HolePunch True/On: "<< /Punch 3 >> setpagedevice"
*%CloseUI: *HolePunch
*%OpenUI *Jog/Offset Pages: PickOne
*%DefaultJog: PrtSet
*%OrderDependency: 170 AnySetup *Jog
*%Jog PrtSet/Printer Setting: ""
*%Jog None/Off: "<< /Jog 0 >> setpagedevice"
*%Jog EndOfSet/Between Copies: "<< /Jog 3 >> setpagedevice"
*%CloseUI: *Jog
*OpenUI *ColorCorrection/Color Correction: PickOne
*OrderDependency: 140 AnySetup *ColorCorrection
*DefaultColorCorrection: None
*ColorCorrection None/Printer Setting: ""
*ColorCorrection Off/Off: "
<< /DeviceRenderingInfo << /Type 101 /ColorCorrection /Off >>
/ProcessColorModel /DeviceCMYK >> setpagedevice"
*End
*ColorCorrection Auto/Auto: "
<< /DeviceRenderingInfo << /Type 101 /ColorCorrection /Automatic >>
/ProcessColorModel /DeviceCMYK >> setpagedevice"
*End
*ColorCorrection Vivid/Vivid: "
<< /DeviceRenderingInfo << /Type 101 /ColorCorrection /Vivid >>
/ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*ColorCorrection Display/Display: "
<< /DeviceRenderingInfo << /Type 101 /ColorCorrection /Display >>
/ProcessColorModel /DeviceRGB >> setpagedevice"
*End
*ColorCorrection CMYK/CMYK: "
<< /DeviceRenderingInfo << /Type 101 /ColorCorrection /SWOP >>
/ProcessColorModel /DeviceCMYK >> setpagedevice"
*End
*ColorCorrection Manual/Manual: "
<< /DeviceRenderingInfo << /Type 102 /ColorCorrection /Manual >>
>> setpagedevice"
*End
*?ColorCorrection: "
save statusdict begin
[(Off) (Auto) (Vivid)(B&W)(Display)(CMYK)(2ColorDraft)]
colorcorrection 1 sub get = flush
end
restore"
*End
*CloseUI: *ColorCorrection
*% === Paper ==========================================
*LandscapeOrientation: Plus90
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageSize Legal/Legal: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageSize B5/B5 182 x 257 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageSize A4/A4: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageSize A5/A5: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*End
*PageSize Executive/Executive: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageSize Folio/Folio: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [612 936] /ImagingBBox null >> setpagedevice"
*End
*PageSize Statement/Statement: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [396 612] /ImagingBBox null >> setpagedevice"
*End
*PageSize Monarch/7 3/4 Envelope 3 7/8 x 7 1/2 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageSize C9/9 Envelope 3 7/8 x 8 7/8 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageSize Comm10/10 Envelope 4 1/8 x 9 1/2 in: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageSize DL/DL Envelope 110 x 220 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageSize C5/C5 Envelope 162 x 229 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*PageSize ISOB5/B5 Envelope 176 x 250 mm: "
<< /Policies << /PageSize 2 >> >> setpagedevice
<< /PageSize [499 709] /ImagingBBox null >> setpagedevice"
*End
*?PageSize: "
save
11 dict
dup /letter (Letter) put
dup /legal (Legal) put
dup /executivepage (Executive) put
dup /a4 (A4) put
dup /b5 (B5) put
dup /a5 (A5) put
dup /folio (Folio) put
dup /statement (Statement) put
dup /3.875x7.5envelope (Monarch) put
dup /3.875x8.875envelope (C9) put
dup /4.125x9.5envelope (Comm10) put
dup /110x220envelope (DL) put
dup /162x229envelope (C5) put
dup /176x250envelope (Envelope.499.709) put
statusdict /papersize get exec
3 1 roll {get} stopped {(Unknown)}if
exch not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer.
*% Usually used with input source selection rather than selection by size (AutoSelect).
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "
<< /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Legal: "
<< /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B5: "
<< /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A4: "
<< /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Executive: "
<< /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*PageRegion A5: "
<< /PageSize [420 595] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Folio: "
<< /PageSize [612 936] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Statement: "
<< /PageSize [396 612] /ImagingBBox null >> setpagedevice"
*End
*%*PageRegion Universal: "
*%<< /PageSize [612 1020] /ImagingBBox null >> setpagedevice"
*%*End
*PageRegion Monarch: "
<< /PageSize [279 540] /ImagingBBox null >> setpagedevice"
*End
*PageRegion C9: "
<< /PageSize [279 639] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Comm10: "
<< /PageSize [297 684] /ImagingBBox null >> setpagedevice"
*End
*PageRegion DL: "
<< /PageSize [312 624] /ImagingBBox null >> setpagedevice"
*End
*PageRegion C5: "
<< /PageSize [459 649] /ImagingBBox null >> setpagedevice"
*End
*PageRegion ISOB5: "
<< /PageSize [499 708] /ImagingBBox null >> setpagedevice"
*End
*CloseUI: *PageRegion
*% Note the dimensions for A4 paper and all envelopes are different than Wrigley
*%OpenUI *ImageableArea/Form Type: PickOne
*% **** Printable Area by key word ****
*DefaultImageableArea: Letter
*ImageableArea Letter: "13 13 600 777"
*ImageableArea Legal: "12 13 599 992"
*ImageableArea Executive: "12 13 509 740"
*ImageableArea B5: "13 13 505 715"
*ImageableArea A4: "10 13 584 829"
*ImageableArea A5: "13 13 407 583"
*ImageableArea Folio: "12 13 599 924"
*ImageableArea Statement: "13 13 376 596"
*%*ImageableArea Universal: "13 13 599 995"
*ImageableArea Monarch: "13 13 271 527"
*ImageableArea C9: "12 13 270 623"
*ImageableArea Comm10: "13 13 284 671"
*ImageableArea DL: "12 13 304 611"
*ImageableArea C5: "12 13 449 635"
*ImageableArea ISOB5: "13 13 487 696"
*?ImageableArea: "
save
/cvp { cvi ( ) cvs print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat flush
restore
"
*End
*%CloseUI: *ImageableArea
*% **** Physical paper dimensions by key word ****
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Executive: "522 756"
*PaperDimension B5: "516 729"
*PaperDimension A4: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension Folio: "612 936"
*PaperDimension Statement: "396 612"
*%*PaperDimension Universal: "612 1020"
*PaperDimension Monarch: "279 540"
*PaperDimension C9: "279 639"
*PaperDimension Comm10: "297 684"
*PaperDimension DL: "312 624"
*PaperDimension C5: "459 649"
*PaperDimension ISOB5: "499 708"
*CustomPageSize True: "
pop pop pop
/CustomPageSize 2 dict dup
/PageSize [
7 -2 roll
] put dup /ImagingBBox null put
def"
*End
*ParamCustomPageSize Width: 1 points 216 612
*ParamCustomPageSize Height: 2 points 216 1020
*ParamCustomPageSize WidthOffset: 3 points 0 0
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 int 0 0
*MaxMediaWidth: "812"
*MaxMediaHeight: "1224"
*HWMargins: 12 12 12 12
*RequiresPageRegion All: True
*% === Input Trays =======================================
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Tray1
*InputSlot Tray1/Tray 1: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
currentpagedevice /InputAttributes get 0 get setpagedevice
<< /InputAttributes << /Priority [0] >> >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot Tray2/Tray 2: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot Tray3/Tray 3: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 3 known { 3 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot Tray4/Tray 4: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 5 known { 5 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot MultiPurpose/MP Feeder: "
<< /ManualFeed false /MediaPosition null >> setpagedevice
userdict /lms
currentpagedevice /InputAttributes get 4 known { 4 }{ 0 }ifelse put
currentpagedevice /InputAttributes get lms get setpagedevice
<< /InputAttributes << /Priority [lms] >> >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot Manual/Manual Paper: "
<< /ManualFeed true /MediaPosition null >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*InputSlot ManualEnv/Manual Envelope: "
<< /ManualFeed true /MediaPosition null >> setpagedevice
<< /Policies << /PageSize 2 >> >> setpagedevice"
*End
*?InputSlot: "
save
[ (Tray1)(Tray2)(Tray3)(Tray4)(MultiPurpose)(Manual)(ManualEnv) ]
statusdict /papertray get exec
{get exec} stopped { pop pop (Unknown) } if = flush
restore
"
*End
*CloseUI: *InputSlot
*% === Font Information ==========================================
*DefaultFont: Courier
*Font Courier: Standard "(001.000)" Standard ROM
*Font Courier-Bold: Standard "(001.000)" Standard ROM
*Font Courier-Oblique: Standard "(001.000)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
*Font Times-Roman: Standard "(001.000)" Standard ROM
*Font Times-Bold: Standard "(001.000)" Standard ROM
*Font Times-Italic: Standard "(001.000)" Standard ROM
*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
*Font Helvetica: Standard "(001.000)" Standard ROM
*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.000)" Standard ROM
*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
*Font Bookman-Demi: Standard "(001.000)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
*Font Bookman-Light: Standard "(001.000)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
*Font Helvetica-Light: Standard "(001.000)" Standard ROM
*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Black: Standard "(001.000)" Standard ROM
*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
*Font Palatino-Roman: Standard "(001.000)" Standard ROM
*Font Palatino-Bold: Standard "(001.000)" Standard ROM
*Font Palatino-Italic: Standard "(001.000)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM
*?FontQuery: "
save
4 dict begin
/sv exch def
/str (fonts/ ) def
/st2 128 string def
{ count 0 gt
{ dup st2 cvs (/) print print (:) print dup FontDirectory exch known
{pop (Yes)}
{ str exch st2 cvs dup length /len exch def
6 exch putinterval str 0 len 6 add getinterval mark exch
{ } st2 filenameforall counttomark 0 gt
{ cleartomark (Yes)}{cleartomark (No)}ifelse
}ifelse = flush
}{ exit } ifelse
} bind loop
(*) = flush
sv
end
restore
"
*End
*?FontList: "
save
2 dict begin
/sv exch def
/str 128 string def
FontDirectory { pop == } bind forall flush
/filenameforall where
{ pop save (fonts/*)
{ dup length 6 sub 6 exch getinterval cvn == } bind
str filenameforall flush restore
} if
(*) = flush
sv
end
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%% exitserver: permanent state may be changed %%"
*Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %% status: <one of these> %% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "not ready"
*% Input Sources (format: %% status: <stat>; source: <one of these> %% )
*Source: "Serial"
*Source: "Parallel"
*Source: "Network"
*% Printer Error (format: %% PrinterError: <one of these> %%)
*PrinterError: "Paper Jam"
*PrinterError: "Wrong Paper Length"
*PrinterError: "Invalid Manual Insertion"
*PrinterError: "Change Size in Feeder"
*PrinterError: "Change Size in Tray 1"
*PrinterError: "Change Size in Tray 2"
*PrinterError: "Paper Out or Feed Failure - Feed"
*PrinterError: "Load Manual Envelope"
*PrinterError: "Paper Out or Feed Failure - Tray 1"
*PrinterError: "Paper Out or Feed Failure - Tray 2"
*PrinterError: "Load Manual Paper"
*PrinterError: "Output Bin Full"
*PrinterError: "Cover Open/Cartridge Not Installed"
*PrinterError: "Insufficient Memory"
*PrinterError: "Complex Page"
*PrinterError: "Default Storage Error"
*PrinterError: "Defective Font Card Installed"
*PrinterError: "Flash Full"
*PrinterError: "ioerror"
*PrinterError: "Flash Error"
*PrinterError: "Duplex Not Attached"
*PrinterError: "Duplex Cover Open"
*PrinterError: "Scheduled Maintenance"
*PrinterError: "Toner Low"
*PrinterError: "Service Error"
*% === Color Separation Information =====================
*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) =====================
*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"
*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*% For 71 lpi / 600 dpi ===============================
*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"
*% For 116 lpi / 1200 dpi ===================================================
*ColorSepScreenAngle ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
*ColorSepScreenFreq CustomColor.116lpi.1200dpi/116 lpi / 1200 dpi: "106.066"
*ColorSepScreenFreq ProcessCyan.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.116lpi.1200dpi/116 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "100.0"
*ColorSepScreenProc ProcessYellow.116lpi.1200dpi/116 lpi / 1200 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*% ==== Extended Jog Finisher Feature ====
*% <Jog subtag ID> <install flag>
*%LXEXTJog PrtSet: "
*% DrvCfg: <16> <0>
*%"
*%End
*%LXEXTJog None: "
*% DrvCfg: <16> <2>
*%"
*%End
*%LXEXTJog EndOfSet: "
*% DrvCfg: <16> <101>
*%"
*%End
*% End of PPD file for Lexmark C750 Laser Printers