*PPD-Adobe: "4.1"
*% Adobe Systems PostScript(R) Printer Description File
*% For IBM LaserPrinter 4029
*% For use with Adobe's and similar printer drivers
*% Produced by Lexmark International, Inc.
*%
*% Copyright (c) 1993 Lexmark International Inc. All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*%
*FormatVersion: "4.1"
*FileVersion: "2.0"
*LanguageVersion: English
*PCFileName: "IB4029B1.PPD"
*Product: "(IBM LaserPrinter 4029)"
*PSVersion: "(52.3) 1"
*ModelName: "IBM 4029 with 17 Fonts"
*ShortNickName: "IBM 4029 with 17 Fonts v52.3"
*NickName: "IBM 4029 with 17 Fonts v52.3"
*LanguageLevel: "1"
*Protocols: SIC
*FreeVM: "432000"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*Throughput: "10"
*Password: "0"
*ExitServer: "
count 0 eq % is the password on the stack?
{ true }
{ dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq % is the password on the stack?
{ true }
{ dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*OpenUI *Smoothing/Smoothing: PickOne
*DefaultSmoothing: None
*OrderDependency: 40 AnySetup *Smoothing
*Smoothing None/Printer Setting: ""
*Smoothing True/On: "1 statusdict /setdoret get exec"
*Smoothing False/Off: "0 statusdict /setdoret get exec"
*?Smoothing: "
save
[(False)(True)(True)(True)(Unknown)] statusdict /doret get exec
dup 3 gt{pop 4}if get = flush
restore
"
*End
*CloseUI: *Smoothing
*% === Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultOutputOrder: Normal
*OutputOrder Normal: ""
*OutputOrder Reverse: ""
*% === Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(002.002)" Standard ROM
*Font Courier-Bold: Standard "(002.002)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
*Font Courier-Oblique: Standard "(002.002)" Standard ROM
*Font Helvetica: Standard "(001.002)" Standard ROM
*Font Helvetica-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.002)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.002)" Standard ROM
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM
*Font Times-Italic: Standard "(001.002)" Standard ROM
*Font Times-Roman: Standard "(001.002)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{ count 1 gt
{ exch dup str 6 94 getinterval cvs
(/) print dup print (:) print exch
FontDirectory exch known
{ pop (Yes) }
{ length 6 add str 0 3 -1 roll getinterval mark exch status
{cleartomark (Yes)}{cleartomark (No)} ifelse
} ifelse =
}
{exit} ifelse
}bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush /filenameforall where
{ pop (fonts/*)
{dup length 6 sub 6 exch getinterval cvn == } bind
128 string filenameforall flush
} if
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "PrinterError: Printer Offline"
*Status: "PrinterError: Paper Out or Feed Failure - Tray 1"
*Status: "PrinterError: Paper Out or Feed Failure - Tray 2"
*Status: "PrinterError: Paper Out or Feed Failure - Envelope Feeder"
*Status: "PrinterError: Load Paper Requested"
*Status: "PrinterError: Load Envelope Requested"
*Status: "PrinterError: Invalid Manual Insertion"
*Status: "PrinterError: Wrong Paper Length"
*Status: "PrinterError: Paper Jam"
*Status: "PrinterError: Cover Open/Cartridge Not Installed"
*Status: "PrinterError: Output Bin Full"
*Status: "PrinterError: Default Storage Error"
*Status: "PrinterError: Battery Low - Slot 1"
*Status: "PrinterError: Battery Low - Slot 2"
*Status: "PrinterError: Non-Download Font Card Installed - Slot 1"
*Status: "PrinterError: Non-Download Font Card Installed - Slot 2"
*Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 1"
*Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 2"
*Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 1"
*Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 2"
*Status: "PrinterError: Defective Font Card Installed - Slot 1"
*Status: "PrinterError: Defective Font Card Installed - Slot 2"
*Status: "PrinterError: Unsupported Card Installed - Slot 1"
*Status: "PrinterError: Unsupported Card Installed - Slot 2"
*Status: "PrinterError: Printer Busy"
*Status: "PrinterError: Printer Error"
*Status: "PrinterError: Printer Warming Up"
*Status: "PrinterError: Service Error"
*Status: "PrinterError: ioerror"
*Status: "PrinterError: Wrong Paper Size Installed"
*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*% For 71 lpi / 600 dpi ===============================
