Index: arch/alpha/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/alpha/Kconfig,v
retrieving revision 1.13
diff -u -p -r1.13 Kconfig
--- arch/alpha/Kconfig 5 May 2003 17:05:24 -0000 1.13
+++ arch/alpha/Kconfig 9 Jun 2003 20:26:39 -0000
@@ -753,67 +753,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
-config IDE_MAX_HWIFS
- int "Max IDE interfaces"
- depends on IDE
- default 4
- help
- This is the maximum number of IDE hardware interfaces that will
- be supported by the driver. Make sure it is at least as high as
- the number IDE interfaces in your system.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/arm/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/arm/Kconfig,v
retrieving revision 1.13
diff -u -p -r1.13 Kconfig
--- arch/arm/Kconfig 5 May 2003 17:05:26 -0000 1.13
+++ arch/arm/Kconfig 9 Jun 2003 20:27:25 -0000
@@ -949,58 +949,7 @@ source "net/irda/Kconfig"
source "net/ax25/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/cris/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/cris/Kconfig,v
retrieving revision 1.8
diff -u -p -r1.8 Kconfig
--- arch/cris/Kconfig 5 May 2003 17:05:32 -0000 1.8
+++ arch/cris/Kconfig 9 Jun 2003 20:27:33 -0000
@@ -556,15 +556,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/IDE/MFM/RLL support"
-
-config IDE
- tristate "ATA/IDE/MFM/RLL support"
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/h8300/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/h8300/Kconfig,v
retrieving revision 1.3
diff -u -p -r1.3 Kconfig
--- arch/h8300/Kconfig 5 May 2003 17:05:34 -0000 1.3
+++ arch/h8300/Kconfig 9 Jun 2003 20:27:49 -0000
@@ -150,22 +150,7 @@ endmenu
source "drivers/block/Kconfig"
-
-menu "ATA/IDE/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- It only makes sense to choose this option if your board actually
- has an IDE interface. If unsure, say N.
-
source "drivers/ide/Kconfig"
-
-endmenu
source "net/Kconfig"
Index: arch/i386/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/i386/Kconfig,v
retrieving revision 1.22
diff -u -p -r1.22 Kconfig
--- arch/i386/Kconfig 27 May 2003 17:21:14 -0000 1.22
+++ arch/i386/Kconfig 9 Jun 2003 20:28:16 -0000
@@ -1262,58 +1262,7 @@ source "drivers/pnp/Kconfig"
source "drivers/block/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL device support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI device support"
Index: arch/ia64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/ia64/Kconfig,v
retrieving revision 1.12
diff -u -p -r1.12 Kconfig
--- arch/ia64/Kconfig 27 May 2003 17:21:18 -0000 1.12
+++ arch/ia64/Kconfig 9 Jun 2003 20:28:46 -0000
@@ -589,59 +589,6 @@ source "drivers/md/Kconfig"
source "drivers/message/fusion/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
-source "drivers/ide/Kconfig"
-
-endmenu
-
endif
Index: arch/m68k/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/m68k/Kconfig,v
retrieving revision 1.13
diff -u -p -r1.13 Kconfig
--- arch/m68k/Kconfig 5 May 2003 17:05:41 -0000 1.13
+++ arch/m68k/Kconfig 9 Jun 2003 20:28:57 -0000
@@ -655,58 +655,7 @@ source "drivers/md/Kconfig"
source "drivers/input/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL device support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI device support"
Index: arch/m68knommu/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/m68knommu/Kconfig,v
retrieving revision 1.10
diff -u -p -r1.10 Kconfig
--- arch/m68knommu/Kconfig 27 May 2003 17:21:31 -0000 1.10
+++ arch/m68knommu/Kconfig 9 Jun 2003 20:29:06 -0000
@@ -532,22 +532,7 @@ source "drivers/pnp/Kconfig"
source "drivers/block/Kconfig"
-
-menu "ATA/IDE/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- It only makes sense to choose this option if your board actually
- has an IDE interface. If unsure, say N.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI device support"
Index: arch/mips/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/mips/Kconfig,v
retrieving revision 1.10
diff -u -p -r1.10 Kconfig
--- arch/mips/Kconfig 5 May 2003 17:05:43 -0000 1.10
+++ arch/mips/Kconfig 9 Jun 2003 20:29:17 -0000
@@ -827,59 +827,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
- depends on !SGI_IP22 && !DECSTATION
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/mips64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/mips64/Kconfig,v
retrieving revision 1.12
diff -u -p -r1.12 Kconfig
--- arch/mips64/Kconfig 5 May 2003 17:05:47 -0000 1.12
+++ arch/mips64/Kconfig 9 Jun 2003 20:29:27 -0000
@@ -421,58 +421,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/parisc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/parisc/Kconfig,v
retrieving revision 1.18
diff -u -p -r1.18 Kconfig
--- arch/parisc/Kconfig 12 May 2003 11:49:49 -0000 1.18
+++ arch/parisc/Kconfig 9 Jun 2003 20:29:37 -0000
@@ -237,12 +237,8 @@ source "drivers/parport/Kconfig"
source "drivers/block/Kconfig"
-
-menu "ATA/IDE/MFM/RLL support"
-config IDE
- tristate "ATA/IDE/MFM/RLL support"
source "drivers/ide/Kconfig"
-endmenu
+
menu "SCSI support"
Index: arch/ppc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/ppc/Kconfig,v
retrieving revision 1.12
diff -u -p -r1.12 Kconfig
--- arch/ppc/Kconfig 27 May 2003 17:21:39 -0000 1.12
+++ arch/ppc/Kconfig 9 Jun 2003 20:29:47 -0000
@@ -1182,55 +1182,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/IDE/MFM/RLL support"
-
-config IDE
- tristate "ATA/IDE/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. Quite a number of
- disks use the IDE interface.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/ppc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/ppc64/Kconfig,v
retrieving revision 1.11
diff -u -p -r1.11 Kconfig
--- arch/ppc64/Kconfig 5 May 2003 17:05:54 -0000 1.11
+++ arch/ppc64/Kconfig 9 Jun 2003 20:29:57 -0000
@@ -268,55 +268,7 @@ source "drivers/pnp/Kconfig"
source "drivers/block/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. Quite a number of
- disks use the IDE interface.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI device support"
Index: arch/sh/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/sh/Kconfig,v
retrieving revision 1.10
diff -u -p -r1.10 Kconfig
--- arch/sh/Kconfig 5 May 2003 17:05:58 -0000 1.10
+++ arch/sh/Kconfig 9 Jun 2003 20:30:09 -0000
@@ -657,58 +657,7 @@ source "drivers/block/Kconfig"
source "drivers/md/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/sparc/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/sparc/Kconfig,v
retrieving revision 1.13
diff -u -p -r1.13 Kconfig
--- arch/sparc/Kconfig 27 May 2003 17:21:58 -0000 1.13
+++ arch/sparc/Kconfig 9 Jun 2003 20:30:29 -0000
@@ -547,57 +547,7 @@ endmenu
# Don't frighten a common SBus user
if PCI
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
endif
Index: arch/sparc64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/sparc64/Kconfig,v
retrieving revision 1.14
diff -u -p -r1.14 Kconfig
--- arch/sparc64/Kconfig 27 May 2003 17:22:04 -0000 1.14
+++ arch/sparc64/Kconfig 9 Jun 2003 20:30:43 -0000
@@ -719,57 +719,7 @@ config BLK_DEV_INITRD
endmenu
-menu "ATA/ATAPI/MFM/RLL device support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself don't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters disk.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI support"
Index: arch/v850/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/v850/Kconfig,v
retrieving revision 1.11
diff -u -p -r1.11 Kconfig
--- arch/v850/Kconfig 5 May 2003 17:06:09 -0000 1.11
+++ arch/v850/Kconfig 9 Jun 2003 20:31:00 -0000
@@ -270,16 +270,6 @@ source drivers/block/Kconfig
menu "Disk device support"
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- It only makes sense to choose this option if your board actually
- has an IDE interface. If unsure, say N.
-
source "drivers/ide/Kconfig"
config SCSI
Index: arch/x86_64/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/arch/x86_64/Kconfig,v
retrieving revision 1.17
diff -u -p -r1.17 Kconfig
--- arch/x86_64/Kconfig 27 May 2003 17:22:13 -0000 1.17
+++ arch/x86_64/Kconfig 9 Jun 2003 20:31:28 -0000
@@ -415,58 +415,7 @@ source "drivers/parport/Kconfig"
source "drivers/block/Kconfig"
-
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
- tristate "ATA/ATAPI/MFM/RLL device support"
- ---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
-
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self-Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre-hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself doesn't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters from disk drives.
-
- If you want to compile this driver as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ide.
-
- For further information, please read <file:Documentation/ide.txt>.
-
- If unsure, say Y.
-
source "drivers/ide/Kconfig"
-
-endmenu
menu "SCSI device support"
Index: drivers/ide/Kconfig
===================================================================
RCS file: /var/cvs/linux-2.5/drivers/ide/Kconfig,v
retrieving revision 1.10
diff -u -p -r1.10 Kconfig
--- drivers/ide/Kconfig 27 May 2003 17:23:16 -0000 1.10
+++ drivers/ide/Kconfig 9 Jun 2003 20:26:28 -0000
@@ -4,6 +4,63 @@
# Andre Hedrick <
[email protected]>
#
+menu "ATA/ATAPI/MFM/RLL support"
+
+config IDE
+ tristate "ATA/ATAPI/MFM/RLL support"
+ ---help---
+ If you say Y here, your kernel will be able to manage low cost mass
+ storage units such as ATA/(E)IDE and ATAPI units. The most common
+ cases are IDE hard drives and ATAPI CD-ROM drives.
+
+ If your system is pure SCSI and doesn't use these interfaces, you
+ can say N here.
+
+ Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+ for mass storage units such as hard disks. It was designed by
+ Western Digital and Compaq Computer in 1984. It was then named
+ ST506. Quite a number of disks use the IDE interface.
+
+ AT Attachment (ATA) is the superset of the IDE specifications.
+ ST506 was also called ATA-1.
+
+ Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+ ATA-3. It provides support for larger disks (up to 8.4GB by means of
+ the LBA standard), more disks (4 instead of 2) and for other mass
+ storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+ ATA-4 and provides faster (and more CPU friendly) transfer modes
+ than previous PIO (Programmed processor Input/Output) from previous
+ ATA/IDE standards by means of fast DMA controllers.
+
+ ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+ CD-ROM drives, similar in many respects to the SCSI protocol.
+
+ SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+ designed in order to prevent data corruption and disk crash by
+ detecting pre hardware failure conditions (heat, access time, and
+ the like...). Disks built since June 1995 may follow this standard.
+ The kernel itself don't manage this; however there are quite a
+ number of user programs such as smart that can query the status of
+ SMART parameters disk.
+
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called ide.
+
+ For further information, please read <file:Documentation/ide.txt>.
+
+ If unsure, say Y.
+
+config IDE_MAX_HWIFS
+ int "Max IDE interfaces"
+ depends on ALPHA && IDE
+ default 4
+ help
+ This is the maximum number of IDE hardware interfaces that will
+ be supported by the driver. Make sure it is at least as high as
+ the number of IDE interfaces in your system.
+
menu "IDE, ATA and ATAPI Block devices"
depends on IDE!=n
@@ -1083,3 +1140,4 @@ config BLK_DEV_IDE_MODES
endmenu
+endmenu
