1.2 MB LINUX BOOTDISKS

To install Linux, you'll need a bootdisk and a rootdisk.  The bootdisk
has to contain drivers that support your hardware, so you'll have to select
the most appropriate disk from the list below.  NOTE: it's best to use the
disk with the least drivers possible to save memory.

README.TXT      This file contains information about the drivers in the
               various bootdisks, and instructions for using a bootdisk to
               start a system that isn't booting properly.

WHICH.ONE       A chart to help you select which bootdisk to use.

  Now, put a formatted floppy disk in your boot drive and select one of the
  images below.  Hitting ENTER will create the boot image in drive A:

  Disk images used for installing from CD-ROM:

aztech.bat      This disk supports Aztech CDA268-01A, ORCHID CD-3110, and
               OKANO/WEARNES CDD110 CD-ROM drives.

cdu31a.bat      This disk supports the Sony CDU-31A and 33A CD-ROM drives.

old31a.bat      This is another disk that supports the Sony CDU-31A and 33A
               drives, but autoprobes for the drive controller.  It might work
               better on some systems.
cdu535.bat      This disk supports the Sony CDU-531 and CDU-535 CD-ROM drives.

idecd.bat       This disk supports most IDE/ATAPI complient CD-ROM drives.

mitsumi.bat     This disk supports the Mitsumi CRMC LU005S, FX001S, and FX001D
               CD-ROM drives.

sbpcd.bat       This disk supports the Matsushita, Kotobuki, Panasonic, and
               CreativeLabs (SoundBlaster CD):  CR-521, CR-522, CR-523,
               CR-562, CR-563;  Longshine LCS-7260;  IBM External ISA CD-ROM
               Drive; and the quad speed TEAC CD-55A.

scsi.bat        This disk supports SCSI CD-ROM drives connected to one of the
               following SCSI controllers:

               Adaptec 152x/1542/1740/274x/284x     Generic NCR5380
               Buslogic                             NCR 53c7,8xx
               EATA-DMA (DPT/NEC/AT&T)              Always IN2000
               Seagate ST-02                        Pro Audio Spectrum 16
               Future Domain TMC-8xx, 16xx          QLogic
                                                    Trantor T128/T128F/T228
                                                    Ultrastor
                                                    7000 FASST


 Disk images used for installing from other sources, such as floppy disk,
 hard drive, tape, or NFS:

bare.bat        This is a "bare" Linux bootdisk, used to install to an IDE
               hard drive from floppy or hard disk.

net.bat         This disk is used for installing to an IDE hard drive from
               NFS (Network File System).

scsinet1.bat    This disk is used to install via NFS to a system using one
               of the following SCSI controllers:

               Adaptec 152x/1542/1740/274x/284x, Buslogic,
               EATA-DMA (DPT/NEC/AT&T), Seagate ST-02,
               Future Domain TMC-8xx, 16xx

scsinet2.bat    This disk is used to install via NFS to a system using one
               of the following SCSI controllers:

               Generic NCR5380, NCR 53c7,8xx, Always IN2000,
               Pro Audio Spectrum 16, QLogic, Trantor T128/T128F/T228,
               Ultrastor, 7000 FASST

xt.bat          This disk allows you to install from floppy disk or hard drive
               to a machine using XT style (RLL/MFM) hard drives.