PACKAGES.TXT; Thu May 1 01:41:07 UTC 2008
This file provides details on the Slackware packages found
in the ./slackware/ directory.
Total size of all packages (compressed): 1693 MB
Total size of all packages (uncompressed): 4490 MB
PACKAGE NAME: a2ps-4.13b-i386-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 859 K
PACKAGE SIZE (uncompressed): 3140 K
PACKAGE DESCRIPTION:
a2ps: a2ps (any to PostScript filter)
a2ps:
a2ps: GNU a2ps is an Any to PostScript filter. Of course it processes
a2ps: plain text files, but also pretty prints quite a few popular
a2ps: programming languages. Also contained in this package is psutils, a
a2ps: collection of programs for manipulating PostScript files.
a2ps:
a2ps: a2ps is used by Apsfilter, so be sure to install this package if you
a2ps: plan to do any printing.
a2ps:
PACKAGE NAME: aaa_base-12.1.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
aaa_base: aaa_base (Basic Linux filesystem package)
aaa_base:
aaa_base: Sets up the empty directory tree for Slackware and adds an email to
aaa_base: root's mailbox welcoming them to Linux. :) This package should be
aaa_base: installed first, and never uninstalled.
aaa_base:
PACKAGE NAME: aaa_elflibs-12.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 4762 K
PACKAGE SIZE (uncompressed): 10880 K
PACKAGE DESCRIPTION:
aaa_elflibs: aaa_elflibs (shared libraries needed by many programs)
aaa_elflibs:
aaa_elflibs: This is a collection of shared libraries needed to run Linux programs.
aaa_elflibs: ELF (Executable and Linking Format) is the standard Linux binary
aaa_elflibs: format. These libraries are gathered from other Slackware packages
aaa_elflibs: and are intended to give a fairly complete initial set of libraries.
aaa_elflibs: This package should be not upgraded or reinstalled (it could copy
aaa_elflibs: over newer library versions).
aaa_elflibs:
PACKAGE NAME: aaa_terminfo-5.6-noarch-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 64 K
PACKAGE SIZE (uncompressed): 630 K
PACKAGE DESCRIPTION:
aaa_terminfo: aaa_terminfo (a basic collection of terminfo entries)
aaa_terminfo:
aaa_terminfo: This is a starter set of files from the terminfo database, which
aaa_terminfo: should be enough in most cases. The complete set (from which this
aaa_terminfo: is derived) can be found in the ncurses package.
aaa_terminfo:
aaa_terminfo: The terminfo database describes the characteristics of terminals, so
aaa_terminfo: don't try to log in without this package. :-)
aaa_terminfo:
PACKAGE NAME: aalib-1.4rc5-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 197 K
PACKAGE SIZE (uncompressed): 510 K
PACKAGE DESCRIPTION:
aalib: aalib (ASCII Art library) _1l1vlvlvlvlvlvlvlvlvvl=.
aalib: __111llvl+' __...._ +1lv11=.
aalib: AA-lib is an ASCII art graphics _11vllvlv+ =vlvlvl1= /1vlvv1i=_
aalib: library. Internally, the AA-lib _vvllvlvlv= -+vlvlvlvlvlvlvlvdvl=_
aalib: API is similar to other graphics _:lvlvlvlvlv=. --^-^1lvlvlrlvv1s
aalib: libraries, but it renders the =llvlvvlvlvv11lvl=.... -lvlevlvlvv
aalib: the output into ASCII art (like =lvlvlvlvll-^+1vv11111v_ vlkllvllvl
aalib: the example to the right :^) =lvlvlvlvl1 +1vv1v1lv _llvlvlvlvl
aalib: The developers of AA-lib are +1lv |vlvl' -^-^- _1olvlvlvlv'
aalib: Jan Hubicka, Thomas A. K. Kjaer, -1vl |lvlvlvlvlvlvlvlvv1vlvlvlvlv+.
aalib: Tim Newsome, and Kamil Toman. +1 ^^^^^^^^^^^^^^^^^^^^^^^^vlv-
aalib: -+uvlvlvlvlvlvlvlvlvlvlvlvl+_
aalib: -vlvlvlvlvlvlvlvllvlvl-'
PACKAGE NAME: acct-6.3.2-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 52 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
acct: acct (process accounting utilities)
acct:
acct: This is a set of utilities which reports and summarizes data about
acct: user connect times and process execution statistics. To activate
acct: process accounting, create the log file (touch /var/log/pacct), and
acct: then use the accton command to start it (accton /var/log/pacct).
acct: Be aware that the log file can grow to be quite large.
acct:
acct: The GNU process accounting utilities were written by Noel Cragg.
acct:
PACKAGE NAME: acl-2.2.47_1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 144 K
PACKAGE SIZE (uncompressed): 380 K
PACKAGE DESCRIPTION:
acl: acl (tools for using POSIX Access Control Lists)
acl:
acl: This package contains a set of tools and libraries for manipulating
acl: POSIX Access Control Lists. POSIX Access Control Lists (defined in
acl: POSIX 1003.1e draft standard 17) are used to define more fine-grained
acl: discretionary access rights for files and directories.
acl:
PACKAGE NAME: acpid-1.0.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
acpid: acpid (ACPI daemon)
acpid:
acpid: Most modern computers support the Advanced Configuration and Power
acpid: Interface (ACPI) standard to allow intelligent power management.
acpid: This package contains acpid, which is the user-space daemon needed in
acpid: order to make the Linux ACPI support completely functional.
acpid:
acpid: ACPI must be compiled into the kernel to run acpid.
acpid:
PACKAGE NAME: alsa-lib-1.0.15-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 430 K
PACKAGE SIZE (uncompressed): 1500 K
PACKAGE DESCRIPTION:
alsa-lib: alsa-lib (Advanced Linux Sound Architecture library)
alsa-lib:
alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-lib: functionality to the Linux operating system. This is the ALSA library
alsa-lib: (libasound) which is used by audio applications.
alsa-lib:
alsa-lib: For more information, see
http://alsa-project.org
alsa-lib:
PACKAGE NAME: alsa-oss-1.0.15-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 34 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
alsa-oss: alsa-oss (library/wrapper to use OSS programs with ALSA)
alsa-oss:
alsa-oss: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-oss: functionality to the Linux operating system. OSS (Open Sound System)
alsa-oss: is an older sound system for Linux that ALSA is replacing. Using
alsa-oss: the aoss wrapper you can use programs that only support OSS with ALSA
alsa-oss: without having to load the OSS compatibility kernel modules.
alsa-oss:
PACKAGE NAME: alsa-utils-1.0.15-i486-3.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 1036 K
PACKAGE SIZE (uncompressed): 1650 K
PACKAGE DESCRIPTION:
alsa-utils: alsa-utils (Advanced Linux Sound Architecture utilities)
alsa-utils:
alsa-utils: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
alsa-utils: functionality to the Linux operating system. This package contains
alsa-utils: command line audio utilities for use with ALSA:
alsa-utils: alsactl (manage soundcard settings)
alsa-utils: arecord/aplay (capture and play audio)
alsa-utils: amixer (adjust mixer settings from the command line)
alsa-utils: alsamixer (an ncurses-based console mixer)
alsa-utils:
alsa-utils: For more information, see
http://alsa-project.org
PACKAGE NAME: amarok-1.4.9.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 13297 K
PACKAGE SIZE (uncompressed): 28260 K
PACKAGE DESCRIPTION:
amarok: amarok (music player)
amarok:
amarok: Amarok is a music player for Linux and Unix with an intuitive
amarok: interface. Amarok makes playing the music you love easier than ever
amarok: before -- and looks good doing it.
amarok:
amarok: Amarok's home page is:
http://amarok.kde.org
amarok:
PACKAGE NAME: amp-0.7.6-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 44 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
amp: amp (An MP3 player)
amp:
amp: amp (Audio Mpeg Player) is a command-line MPEG audio decoder (MP3
amp: player). It works with both MPEG1 and MPEG2 audio streams (except for
amp: the multichannel extensions defined in MPEG2), layers 2 and 3.
amp:
PACKAGE NAME: anthy-9100e-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6739 K
PACKAGE SIZE (uncompressed): 23170 K
PACKAGE DESCRIPTION:
anthy: anthy (a system for Japanese input method)
anthy:
anthy: Anthy is a library for Japanese text input. It converts Hiragana text
anthy: to Kana Kanji mixed text.
anthy:
anthy: anthy home:
http://anthy.sourceforge.jp/
anthy:
PACKAGE NAME: apmd-3.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 61 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
apmd: apmd (Advanced Power Management daemon)
apmd:
apmd: apmd is an APM monitoring daemon, and works in conjunction with the
apmd: APM BIOS driver in the kernel. Apmd (and the included tools) handle
apmd: tasks such as automatically putting a laptop into suspend when the
apmd: power level drop below a certain point. This package also includes
apmd: the graphical power management tools xapm and xbattery.
apmd:
apmd: The apmd tools were written by Rik Faith and are maintained by
apmd: Avery Pennarun. xbattery was written by Nathan Sidwell.
apmd:
PACKAGE NAME: appres-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
appres: appres
appres:
appres: appres is part of X11.
appres:
appres: For more information about the X.Org Foundation (the providers of the
appres: X.Org implementation of the X Window System), see their website:
appres:
appres:
http://www.x.org
appres:
PACKAGE NAME: apr-1.2.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 250 K
PACKAGE SIZE (uncompressed): 920 K
PACKAGE DESCRIPTION:
apr: apr (Apache Portable Runtime)
apr:
apr: The mission of the Apache Portable Runtime (APR) is to provide a
apr: free library of C data structures and routines, forming a system
apr: portability layer to as many operating systems as possible.
apr:
PACKAGE NAME: apr-util-1.2.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 105 K
PACKAGE SIZE (uncompressed): 390 K
PACKAGE DESCRIPTION:
apr-util: apr-util (Apache Portable Runtime utilities)
apr-util:
apr-util: The mission of the Apache Portable Runtime (APR) is to provide a
apr-util: free library of C data structures and routines, forming a system
apr-util: portability layer to as many operating systems as possible.
apr-util:
apr-util: This package contains additional utility interfaces for APR;
apr-util: including support for XML, LDAP, database interfaces, URI parsing,
apr-util: and more.
apr-util:
PACKAGE NAME: arts-1.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1193 K
PACKAGE SIZE (uncompressed): 4990 K
PACKAGE DESCRIPTION:
arts: arts (Analog Realtime Synthesizer)
arts:
arts: aRts is the core sound system for KDE, and is short for "analog
arts: realtime synthesizer". aRts is designed to create or process sound
arts: using small specialized modules. These may create a waveform, play
arts: samples, filter data, add signals, perform effects (like delay,
arts: flanger or chorus), or output the data to the soundcard.
arts:
PACKAGE NAME: ash-0.4.0-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 70 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
ash: ash (Kenneth Almquist's ash shell)
ash:
ash: A lightweight (92K) Bourne compatible shell. Great for machines with
ash: low memory, but does not provide all the extras of shells like bash,
ash: tcsh, and zsh. Runs most shell scripts compatible with the Bourne
ash: shell. Note that under Linux, most scripts seem to use at least some
ash: bash-specific syntax. The Slackware setup scripts are a notable
ash: exception, since ash is the shell used on the install disks. NetBSD
ash: uses ash as its /bin/sh.
ash:
PACKAGE NAME: aspell-0.60.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 960 K
PACKAGE SIZE (uncompressed): 3100 K
PACKAGE DESCRIPTION:
aspell: aspell (spell checker)
aspell:
aspell: GNU Aspell is a spell checker designed to eventually replace Ispell.
aspell: It can either be used as a library or as an independent spell checker.
aspell:
PACKAGE NAME: aspell-en-6.0_0-noarch-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1579 K
PACKAGE SIZE (uncompressed): 3550 K
PACKAGE DESCRIPTION:
aspell-en: aspell-en
aspell-en:
aspell-en: GNU Aspell 0.60 English Dictionary Package.
aspell-en:
PACKAGE NAME: at-3.1.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 40 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
at: at (delayed command execution)
at:
at: at and batch read shell commands from standard input (or a specified
at: file) storing them as a job to be scheduled for execution at a later
at: time.
at:
at: The 'at' command was written by David Parsons and Thomas Koenig.
at:
PACKAGE NAME: atk-1.22.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 317 K
PACKAGE SIZE (uncompressed): 1970 K
PACKAGE DESCRIPTION:
atk: atk (accessibility functions library)
atk:
atk: atk is a library of accessibility functions that is used by the
atk: GTK+-2 toolkit.
atk:
PACKAGE NAME: attr-2.4.41_1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 76 K
PACKAGE SIZE (uncompressed): 230 K
PACKAGE DESCRIPTION:
attr: attr (tools for using extended attributes on filesystems)
attr:
attr: This package contains a set of tools for manipulating extended
attr: attributes (name:value pairs associated permanently with files and
attr: directories) on filesystem objects, and the library and header files
attr: needed to develop programs which make use of extended attributes.
attr: Extended attributes are used to provide additional functionality to
attr: a filesystem. For example, Access Control Lists (ACLs) are
attr: implemented using extended attributes.
attr:
PACKAGE NAME: audacious-1.5.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1173 K
PACKAGE SIZE (uncompressed): 3040 K
PACKAGE DESCRIPTION:
audacious: audacious (A relatively powerful media player)
audacious:
audacious: Audacious is a media player, based on Beep Media Player, which is in
audacious: turn based on the X Multimedia System (XMMS). It is used to play
audacious: audio and other kinds of media files. By default Audacious can play
audacious: MPEG audio, Ogg Vorbis, RIFF wav, most module formats, and a few
audacious: other formats. Audacious can be extended through plugins to play a
audacious: number of other audio and video formats.
audacious:
audacious: The webpage for Audacious is:
http://www.audacious-media-player.org.
audacious:
PACKAGE NAME: audacious-plugins-1.5.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1431 K
PACKAGE SIZE (uncompressed): 3610 K
PACKAGE DESCRIPTION:
audacious-plugins: audacious-plugins (Plugins used by the Audacious media player)
audacious-plugins:
audacious-plugins: This is a collection of plugins for Audacious to support additional
audacious-plugins: media formats.
audacious-plugins:
audacious-plugins: The webpage for Audacious is:
http://www.audacious-media-player.org.
audacious-plugins:
PACKAGE NAME: audiofile-0.2.6-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 175 K
PACKAGE SIZE (uncompressed): 540 K
PACKAGE DESCRIPTION:
audiofile: audiofile (audio support library)
audiofile:
audiofile: Audiofile is a library to handle various audio file formats, and is
audiofile: used by the esound daemon. You can also use it to develop your own
audiofile: audiofile applications.
audiofile:
PACKAGE NAME: aumix-2.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 66 K
PACKAGE SIZE (uncompressed): 210 K
PACKAGE DESCRIPTION:
aumix: aumix (GTK+/ncurses audio mixer)
aumix:
aumix: This is a program for adjusting audio mixers from the command line or
aumix: scripts, or interactively at the console or a terminal with a
aumix: full-screen, ncurses-based interface or a GTK-based X interface.
aumix:
PACKAGE NAME: autoconf-2.61-noarch-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 727 K
PACKAGE SIZE (uncompressed): 1860 K
PACKAGE DESCRIPTION:
autoconf: autoconf (generate configuration scripts)
autoconf:
autoconf: GNU autoconf is an extensible package of m4 macros that produce shell
autoconf: scripts to automatically configure software source code packages.
autoconf: These scripts can adapt the packages to many kinds of UNIX-like
autoconf: systems without manual user intervention. Autoconf creates a
autoconf: configuration script for a package from a template file that lists the
autoconf: operating system features that the package can use, in the form of m4
autoconf: macro calls. You must install the "m4" package to be able to use
autoconf: autoconf.
autoconf:
PACKAGE NAME: autofs-3.1.7-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 55 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
autofs: autofs (kernel-based automounter)
autofs:
autofs: autofs is a kernel-based automounter for Linux. It performs a job
autofs: similar to amd(8) but relies on a small stub of kernel code instead of
autofs: pretending to be an NFS server. The result is simpler code, better
autofs: reliability, and much faster operation in the common case (everything
autofs: already mounted.)
autofs:
PACKAGE NAME: automake-1.9.6-noarch-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 473 K
PACKAGE SIZE (uncompressed): 1390 K
PACKAGE DESCRIPTION:
automake: automake (a Makefile generator)
automake:
automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD
automake: make and include files, but aims to be portable and to conform to the
automake: GNU standards for Makefile variables and targets. Automake is a Perl
automake: script. The input files are called Makefile.am. The output files are
automake: called Makefile.in; they are intended for use with Autoconf. Automake
automake: requires certain things to be done in your configure.in. You must
automake: install the "m4" and "perl" packages to be able to use automake.
automake:
PACKAGE NAME: bash-3.1.017-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 722 K
PACKAGE SIZE (uncompressed): 1570 K
PACKAGE DESCRIPTION:
bash: bash (sh-compatible shell)
bash:
bash: The GNU Bourne-Again SHell. Bash is a sh-compatible command
bash: interpreter that executes commands read from the standard input or
bash: from a file. Bash also incorporates useful features from the Korn
bash: and C shells (ksh and csh). Bash is ultimately intended to be a
bash: conformant implementation of the IEEE Posix Shell and Tools
bash: specification (IEEE Working Group 1003.2).
bash:
bash: Bash must be present for the system to boot properly.
bash:
PACKAGE NAME: bc-1.06.95-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 112 K
PACKAGE SIZE (uncompressed): 240 K
PACKAGE DESCRIPTION:
bc: bc (An arbitrary precision calculator language)
bc:
bc: bc is an arbitrary precision numeric processing language. Syntax is
bc: similar to C, but differs in many substantial areas. It supports
bc: interactive execution of statements. bc is a utility included in the
bc: POSIX P1003.2/D11 draft standard.
bc:
bc: The GNU version of bc was written by Philip A. Nelson.
bc:
PACKAGE NAME: bdftopcf-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
bdftopcf: bdftopcf
bdftopcf:
bdftopcf: bdftopcf is part of X11.
bdftopcf:
bdftopcf: For more information about the X.Org Foundation (the providers of the
bdftopcf: X.Org implementation of the X Window System), see their website:
bdftopcf:
bdftopcf:
http://www.x.org
bdftopcf:
PACKAGE NAME: beforelight-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
beforelight: beforelight
beforelight:
beforelight: beforelight is part of X11.
beforelight:
beforelight: For more information about the X.Org Foundation (the providers of the
beforelight: X.Org implementation of the X Window System), see their website:
beforelight:
beforelight:
http://www.x.org
beforelight:
PACKAGE NAME: biff+comsat-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
biff+comsat: biff+comsat (mail arrival notification daemon)
biff+comsat:
biff+comsat: Comsat is the server process which receives reports of incoming mail
biff+comsat: and notifies users if they have requested this service. "biff" is
biff+comsat: the program that requests comsat service "biff y", and may be placed
biff+comsat: in a user's startup file if they'd like to hear a beep and trash
biff+comsat: their console with each new piece of junk mail. ;-)
biff+comsat:
biff+comsat: Biff was the name of Heidi Stettner's dog, who barked when the
biff+comsat: mailman came. Biff was well known to many of the early BSD developers
biff+comsat: living in Evans Hall at U.C. Berkeley.
PACKAGE NAME: bigreqsproto-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 10 K
PACKAGE DESCRIPTION:
bigreqsproto: bigreqsproto
bigreqsproto:
bigreqsproto: bigreqsproto is part of X11.
bigreqsproto:
bigreqsproto: For more information about the X.Org Foundation (the providers of the
bigreqsproto: X.Org implementation of the X Window System), see their website:
bigreqsproto:
bigreqsproto:
http://www.x.org
bigreqsproto:
PACKAGE NAME: bin-11.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 52 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
bin: bin (some command-line utilities)
bin:
bin: The bin package is a collection of miscellaneous command-line
bin: utilities. Some of these (such as 'tempfile') are used in system
bin: scripts.
bin:
PACKAGE NAME: bin86-0.16.15-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
bin86: bin86 (8086 assembler/loader)
bin86:
bin86: This is a complete 8086 assembler and loader which can make 32-bit
bin86: code for the 386+ processors. In the past it was used to compile the
bin86: 16-bit bootsector and setup binaries for the kernel, but modern
bin86: (2.4.x or newer) kernels use GNU ld instead.
bin86:
bin86: The bin86 package is needed to compile 2.2.x or earlier kernels.
bin86:
PACKAGE NAME: bind-9.4.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1942 K
PACKAGE SIZE (uncompressed): 5510 K
PACKAGE DESCRIPTION:
bind: bind (DNS server and utilities)
bind:
bind: The named daemon and support utilities such as dig, host, and
bind: nslookup. Sample configuration files for running a simple caching
bind: nameserver are included. Documentation for advanced name server
bind: setup can be found in /usr/doc/bind-9.x.x/.
bind:
PACKAGE NAME: binutils-2.17.50.0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 5407 K
PACKAGE SIZE (uncompressed): 13720 K
PACKAGE DESCRIPTION:
binutils: binutils (GNU binary development tools)
binutils:
binutils: Binutils is a collection of binary utilities. It includes "as" (the
binutils: portable GNU assembler), "ld" (the GNU linker), and other utilities
binutils: for creating and working with binary programs.
binutils:
binutils: These utilities are REQUIRED to compile C, C++, Objective-C, Fortran,
binutils: and most other programming languages.
binutils:
PACKAGE NAME: bison-2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 361 K
PACKAGE SIZE (uncompressed): 1020 K
PACKAGE DESCRIPTION:
bison: bison (parser generator similar to yacc)
bison:
bison: GNU "Bison" is a general-purpose parser generator that converts a
bison: grammar description for an LALR(1) context-free grammar into a C
bison: program to parse that grammar.
bison:
bison: Bison is upward compatible with Yacc: all properly-written Yacc
bison: grammars ought to work with Bison with no change. Anyone familiar
bison: with Yacc should be able to use Bison with little trouble.
bison:
PACKAGE NAME: bitchx-1.1-i486-5.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1374 K
PACKAGE SIZE (uncompressed): 3540 K
PACKAGE DESCRIPTION:
bitchx: BitchX (chat client)
bitchx:
bitchx: BitchX is an advanced Internet Relay Chat (IRC) client.
bitchx:
PACKAGE NAME: bitmap-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 48 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
bitmap: bitmap
bitmap:
bitmap: bitmap is part of X11.
bitmap:
bitmap: For more information about the X.Org Foundation (the providers of the
bitmap: X.Org implementation of the X Window System), see their website:
bitmap:
bitmap:
http://www.x.org
bitmap:
PACKAGE NAME: blackbox-0.65.0-i486-4.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 360 K
PACKAGE SIZE (uncompressed): 1020 K
PACKAGE DESCRIPTION:
blackbox: blackbox (Blackbox window manager)
blackbox:
blackbox: Blackbox is that fast, light window manager you have been looking for
blackbox: without all those annoying library dependencies.
blackbox:
blackbox: Also included in this package is the bbkeys utility for controlling
blackbox: keyboard shortcut commands from within Blackbox.
blackbox:
blackbox: The Blackbox home page is
http://blackboxwm.sourceforge.net
blackbox:
PACKAGE NAME: bluez-firmware-1.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 78 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
bluez-firmware: bluez-firmware (Bluetooth(TM) firmware)
bluez-firmware:
bluez-firmware: The bluez-firmware package contains firmware needed by various
bluez-firmware: chipsets to support Bluetooth(TM) on Linux.
bluez-firmware:
bluez-firmware: For more info, visit:
http://www.bluez.org
bluez-firmware:
PACKAGE NAME: bluez-hcidump-1.41-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 93 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
bluez-hcidump: bluez-hcidump (Linux Bluetooth(TM) analyzer)
bluez-hcidump:
bluez-hcidump: The bluez-hcidump package contains a network analyzer for
bluez-hcidump: Bluetooth(TM). The hcidump utility reads raw HCI data coming from and
bluez-hcidump: going to a Bluetooth device and prints commands, events and data.
bluez-hcidump:
bluez-hcidump: For more info, visit:
http://www.bluez.org
bluez-hcidump:
PACKAGE NAME: bluez-libs-3.26-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 69 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
bluez-libs: bluez-libs (Bluetooth(TM) wireless libraries)
bluez-libs:
bluez-libs: The bluez-libs package contains an implementation of the Bluetooth(TM)
bluez-libs: wireless standards specifications for Linux.
bluez-libs:
bluez-libs: For more info, visit:
http://www.bluez.org
bluez-libs:
PACKAGE NAME: bluez-utils-3.26-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 548 K
PACKAGE SIZE (uncompressed): 1320 K
PACKAGE DESCRIPTION:
bluez-utils: bluez-utils (Utilities for working with Bluetooth(TM))
bluez-utils:
bluez-utils: The bluez-utils package contains utilities for supporting
bluez-utils: Bluetooth(TM) on Linux.
bluez-utils:
bluez-utils: For more info, visit:
http://www.bluez.org
bluez-utils:
PACKAGE NAME: bootp-2.4.3-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 61 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
bootp: bootp
bootp:
bootp: This is an enhanced version of the CMU BOOTP server which was derived
bootp: from the original BOOTP server created by Bill Croft at Stanford.
bootp: BOOTP allows a network administrator to setup networking information
bootp: for clients via an /etc/bootptab on a server so that the clients can
bootp: automatically get their networking information.
bootp:
PACKAGE NAME: bpe-2.01.00-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 46 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
bpe: bpe (Binary Patch Editor)
bpe:
bpe: bpe is a simple, screen-oriented editor for searching and editing
bpe: ordinary files in either ASCII or hexadecimal modes.
bpe:
bpe: bpe was written by Andreas Pleschutznig. Bill Davidsen contributed
bpe: additional features, as did Ralphe Neill (the current maintainer).
bpe:
PACKAGE NAME: bridge-utils-1.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 30 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
bridge-utils: bridge-utils (network Ethernet bridging utilities)
bridge-utils:
bridge-utils: This package contains utilities for configuring Linux Ethernet
bridge-utils: bridges. The Linux Ethernet bridge can be used for connecting
bridge-utils: multiple Ethernet devices together. The connecting is fully
bridge-utils: transparent. Hosts connected to one Ethernet device see hosts
bridge-utils: connected through a bridge to the other Ethernet devices directly.
bridge-utils:
bridge-utils: bridge-utils was written by Stephen Hemminger and Lennert Buytenhek.
bridge-utils:
PACKAGE NAME: bsd-finger-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
bsd-finger: bsd-finger (user information lookup program)
bsd-finger:
bsd-finger: The finger displays information about the system users. Finger
bsd-finger: displays the user's login name, real name, terminal name and write
bsd-finger: status (as a ``*'' after the terminal name if write permission is
bsd-finger: denied), idle time, login time, office location and office phone
bsd-finger: number.
bsd-finger:
bsd-finger: As fingerd leaks semi-private information about your machine's
bsd-finger: usernames and other data, fingerd should be used with caution.
bsd-finger: Allow machines on a need-to-know basis.
PACKAGE NAME: bsd-games-2.13-i486-8.tgz
PACKAGE LOCATION: ./slackware/y
PACKAGE SIZE (compressed): 2273 K
PACKAGE SIZE (uncompressed): 5460 K
PACKAGE DESCRIPTION:
bsd-games: bsd-games (Classic BSD text games collection)
bsd-games:
bsd-games: Games that go in /usr/games: adventure arithmetic atc backgammon
bsd-games: banner battlestar bcd caesar canfield cfscores countmail cribbage
bsd-games: factor fish fortune gomoku hangman hunt mille monop morse number
bsd-games: phantasia pig pom ppt primes quiz rain random robots rot13 sail
bsd-games: snake snscore teachgammon trek wargames worm worms wump
bsd-games:
bsd-games: Adds a call to 'fortune' to /etc/profile.d/ so that users will get a
bsd-games: fortune message when they log in.
bsd-games:
PACKAGE NAME: bzip2-1.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 174 K
PACKAGE SIZE (uncompressed): 490 K
PACKAGE DESCRIPTION:
bzip2: bzip2 (a block-sorting file compressor)
bzip2:
bzip2: Bzip2 compresses files using the Burrows-Wheeler block sorting text
bzip2: compression algorithm, and Huffman coding. Compression is generally
bzip2: considerably better than that achieved by more conventional LZ77/LZ78-
bzip2: based compressors, and approaches the performance of the PPM family of
bzip2: statistical compressors.
bzip2:
bzip2: Julian Seward <
[email protected]> is the author of bzip2.
bzip2:
PACKAGE NAME: cairo-1.4.14-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 432 K
PACKAGE SIZE (uncompressed): 1750 K
PACKAGE DESCRIPTION:
cairo: cairo (graphics library used by GTK+)
cairo:
cairo: Cairo is a vector graphics library designed to provide high-quality
cairo: display and print output. Cairo is designed to produce
cairo: identical output on all output media while taking advantage of display
cairo: hardware acceleration when available (eg. through the X Render
cairo: Extension or OpenGL).
cairo:
PACKAGE NAME: ccache-2.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 24 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
ccache: ccache (a fast compiler cache)
ccache:
ccache: ccache is a compiler cache. It speeds up re-compilation of C/C++ code
ccache: by caching previous compiles and detecting when the same compile is
ccache: being done again.
ccache:
ccache: ccache was written by Andrew Tridgell.
ccache:
PACKAGE NAME: cdparanoia-III10pre0-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 122 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
cdparanoia: cdparanoia (digital audio extraction tool)
cdparanoia:
cdparanoia: cdparanoia is a Compact Disc Digital Audio (CDDA) extraction tool,
cdparanoia: commonly known on the net as a 'ripper'. It reads digital audio data
cdparanoia: from a Compact Disc and saves it to sound files. cdparanoia has been
cdparanoia: designed to read correct audio data even using cheap CD-ROM drives
cdparanoia: prone to misalignment, frame jitter and loss of streaming.
cdparanoia: cdparanoia will also read and repair data from CDs that have been
cdparanoia: damaged in some way.
cdparanoia:
PACKAGE NAME: cdrdao-1.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 455 K
PACKAGE SIZE (uncompressed): 1170 K
PACKAGE DESCRIPTION:
cdrdao: cdrdao (CD burning utility)
cdrdao:
cdrdao: cdrdao burns proper disc-at-once (DAO) audio discs. In DAO mode the
cdrdao: disc is written in one shot, so you don't have to have irritating 2
cdrdao: second gaps interrupting a live recording.
cdrdao:
PACKAGE NAME: cdrtools-2.01.01a38-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 1272 K
PACKAGE SIZE (uncompressed): 2870 K
PACKAGE DESCRIPTION:
cdrtools: cdrtools (CD-R, ISO and related tools)
cdrtools:
cdrtools: Tools for mastering and writing compact discs.
cdrtools:
cdrtools: cdda2wav -- CD audio sampling utility.
cdrtools: cdrecord -- burn discs in most ATAPI and SCSI CD-R drives.
cdrtools: mkisofs -- create ISO9660/HFS/Joliet CD-ROM images.
cdrtools: mkzftree -- compress a file tree to make a compressed CD-ROM.
cdrtools:
PACKAGE NAME: clisp-2.41a-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 11493 K
PACKAGE SIZE (uncompressed): 33870 K
PACKAGE DESCRIPTION:
clisp: clisp (a Common Lisp implementation)
clisp:
clisp: Common Lisp is a high-level, general-purpose programming language.
clisp: GNU CLISP is a Common Lisp implementation by Bruno Haible of Karlsruhe
clisp: University and Michael Stoll of Munich University, both in Germany.
clisp: It mostly supports the Lisp described in the ANSI Common Lisp standard.
clisp: The user interface comes in German, English, French, Spanish, Dutch
clisp: and Russian. GNU CLISP includes an interpreter, a compiler, a
clisp: debugger, a large subset of CLOS, a foreign language interface and a
clisp: socket interface. An X11 interface is available through CLX and
clisp: Garnet.
PACKAGE NAME: cmake-2.4.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 4141 K
PACKAGE SIZE (uncompressed): 13790 K
PACKAGE DESCRIPTION:
cmake: CMake (cross-platform, open-source make system)
cmake:
cmake: CMake is used to control the software process using simple platform
cmake: and compiler independed configuration files. CMake generates
cmake: native makefiles and workspaces that can be used in the
cmake: compiler environment of your choice.
cmake:
cmake: CMake's home on the web is:
http://www.cmake.org
cmake:
PACKAGE NAME: compiz-0.7.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 477 K
PACKAGE SIZE (uncompressed): 1480 K
PACKAGE DESCRIPTION:
compiz: compiz
compiz:
compiz: compiz is part of X11.
compiz:
compiz: For more information about the X.Org Foundation (the providers of the
compiz: X.Org implementation of the X Window System), see their website:
compiz:
compiz:
http://www.x.org
compiz:
PACKAGE NAME: compositeproto-0.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
compositeproto: compositeproto
compositeproto:
compositeproto: compositeproto is part of X11.
compositeproto:
compositeproto: For more information about the X.Org Foundation (the providers of the
compositeproto: X.Org implementation of the X Window System), see their website:
compositeproto:
compositeproto:
http://www.x.org
compositeproto:
PACKAGE NAME: coreutils-6.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 2970 K
PACKAGE SIZE (uncompressed): 7860 K
PACKAGE DESCRIPTION:
coreutils: coreutils (core GNU utilities)
coreutils:
coreutils: These are the GNU core utilities, the basic command line programs
coreutils: such as 'mkdir', 'ls', and 'rm' that are needed for the system to
coreutils: run. This package is the union of the GNU fileutils, sh-utils, and
coreutils: textutils packages. Most of these programs have significant
coreutils: advantages over their Unix counterparts, such as greater speed,
coreutils: additional options, and fewer arbitrary limits.
coreutils:
PACKAGE NAME: cpio-2.5-i486-3.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 58 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
cpio: cpio (backup and archiving utility)
cpio:
cpio: This is GNU cpio, a program to manage archives of files. This package
cpio: also includes mt, a tape drive control program. cpio copies files into
cpio: or out of a cpio or tar archive, which is a file that contains other
cpio: files plus information about them, such as their pathname, owner,
cpio: timestamps, and access permissions. The archive can be another file on
cpio: the disk, a magnetic tape, or a pipe.
cpio:
PACKAGE NAME: cryptsetup-1.0.5-i486-4.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 530 K
PACKAGE SIZE (uncompressed): 1130 K
PACKAGE DESCRIPTION:
cryptsetup: cryptsetup (utility for setting up encrypted filesystems)
cryptsetup:
cryptsetup: LUKS is a standard for cross-platform hard disk encryption.
cryptsetup: It provides secure management of multiple userpasswords and
cryptsetup: stores setup information in the partition header.
cryptsetup: LUKS for dm-crypt is now implemented in cryptsetup replacing the
cryptsetup: original cryptsetup. It provides all the functionally of the
cryptsetup: original version plus all LUKS features.
cryptsetup:
cryptsetup: cryptsetup home:
http://luks.endorphin.org/dm-crypt
cryptsetup:
PACKAGE NAME: cscope-15.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 95 K
PACKAGE SIZE (uncompressed): 340 K
PACKAGE DESCRIPTION:
cscope: cscope (source code browsing tool)
cscope:
cscope: Cscope is a text screen based source browsing tool. Although it is
cscope: primarily designed to search C code (including lex and yacc files),
cscope: it can also be used for C++ code.
cscope:
cscope: For more information, see
http://cscope.sourceforge.net.
cscope:
PACKAGE NAME: cups-1.3.7-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 3276 K
PACKAGE SIZE (uncompressed): 11640 K
PACKAGE DESCRIPTION:
cups: CUPS (Common UNIX Printing System)
cups:
cups: The Common UNIX Printing System provides a portable printing layer for
cups: UNIX(R)-like operating systems. It has been developed by Easy Software
cups: Products to promote a standard printing solution for all UNIX vendors
cups: and users. CUPS uses the Internet Printing Protocol ("IPP") as the
cups: basis for managing print jobs and queues. The CUPS package includes
cups: System V and Berkeley command-line interfaces, a PostScript RIP
cups: package for supporting non-PostScript printer drivers, and tools for
cups: creating additional printer drivers and other CUPS services.
cups:
PACKAGE NAME: curl-7.16.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 678 K
PACKAGE SIZE (uncompressed): 1590 K
PACKAGE DESCRIPTION:
curl: curl
curl:
curl: Curl is a command line tool for transferring data specified with URL
curl: syntax. The command is designed to work without user interaction or
curl: any kind of interactivity. Curl offers a busload of useful tricks
curl: like proxy support, user authentication, ftp upload, HTTP post, SSL
curl: (https:) connections, cookies, file transfer resume and more.
curl:
curl: libcurl is a library that Curl uses to do its job. It is readily
curl: available to be used by your software, too.
curl:
PACKAGE NAME: cvs-1.11.22-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 868 K
PACKAGE SIZE (uncompressed): 1470 K
PACKAGE DESCRIPTION:
cvs: cvs (Concurrent Versions System)
cvs:
cvs: CVS is a version control system, which allows you to keep old versions
cvs: of files (usually source code), keep a log of who, when, and why
cvs: changes occurred, etc., like RCS or SCCS. It handles multiple
cvs: developers, multiple directories, triggers to enable/log/control
cvs: various operations, and can work over a wide area network.
cvs:
cvs: Some of the people who have worked on CVS include: Dick Grune,
cvs: Brian Berliner, Jeff Polk, and others too numerous to mention.
cvs:
PACKAGE NAME: cxxlibs-6.0.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 880 K
PACKAGE SIZE (uncompressed): 2840 K
PACKAGE DESCRIPTION:
cxxlibs: cxxlibs (C++ shared library compatibility package)
cxxlibs:
cxxlibs: This package contains the shared libraries needed to run dynamically
cxxlibs: linked C++ binaries linked with older versions of libstdc++.
cxxlibs:
PACKAGE NAME: cyrus-sasl-2.1.22-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 539 K
PACKAGE SIZE (uncompressed): 1600 K
PACKAGE DESCRIPTION:
cyrus-sasl: cyrus-sasl (Simple Authentication and Security Layer)
cyrus-sasl:
cyrus-sasl: This is the Cyrus SASL library. Cyrus SASL is used by mail programs
cyrus-sasl: on the client or server side to provide authentication and
cyrus-sasl: authorization services. See RFC 2222 for more information.
cyrus-sasl:
PACKAGE NAME: damageproto-1.1.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
damageproto: damageproto
damageproto:
damageproto: damageproto is part of X11.
damageproto:
damageproto: For more information about the X.Org Foundation (the providers of the
damageproto: X.Org implementation of the X Window System), see their website:
damageproto:
damageproto:
http://www.x.org
damageproto:
PACKAGE NAME: db42-4.2.52-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 459 K
PACKAGE SIZE (uncompressed): 1150 K
PACKAGE DESCRIPTION:
db42: db42 (Berkeley database library version 4.2.x)
db42:
db42: The Berkeley Database (Berkeley DB) library provides embedded database
db42: support for both traditional and client/server applications.
db42:
db42: This package should be installed if compatibility is needed with
db42: databases created with the Berkeley DB version 4.2.x.
db42:
PACKAGE NAME: db44-4.4.20-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 2077 K
PACKAGE SIZE (uncompressed): 5270 K
PACKAGE DESCRIPTION:
db44: db4 (Berkeley database library version 4.4.x)
db44:
db44: The Berkeley Database (Berkeley DB) library provides embedded database
db44: support for both traditional and client/server applications.
db44:
db44: This package should be installed if compatibility is needed with
db44: databases created with the Berkeley DB version 4.4.x.
db44:
PACKAGE NAME: dbus-1.1.20-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 546 K
PACKAGE SIZE (uncompressed): 1610 K
PACKAGE DESCRIPTION:
dbus: dbus (D-Bus message bus system)
dbus:
dbus: D-Bus supplies both a system daemon (for events such as "new hardware
dbus: device added" or "printer queue changed") and a per user login
dbus: session daemon (for general IPC needs among user applications).
dbus: Also, the message bus is built on top of a general one-to-one message
dbus: passing framework, which can be used by any two apps to communicate
dbus: directly (without going through the message bus daemon).
dbus:
PACKAGE NAME: dbus-glib-0.74-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 125 K
PACKAGE SIZE (uncompressed): 530 K
PACKAGE DESCRIPTION:
dbus-glib: dbus-glib (Glib bindings for dbus)
dbus-glib:
dbus-glib: This package includes the glib bindings for the dbus IPC library.
dbus-glib:
PACKAGE NAME: dbus-python-0.82.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 159 K
PACKAGE SIZE (uncompressed): 640 K
PACKAGE DESCRIPTION:
dbus-python: dbus-python (Python bindings for dbus)
dbus-python:
dbus-python: This package includes python bindings for the D-Bus messagebus.
dbus-python:
PACKAGE NAME: dbus-qt3-0.70-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 34 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
dbus-qt3: dbus-qt3 (Qt3 bindings for dbus)
dbus-qt3:
dbus-qt3: This package contains the qt3 bindings for the D-Bus IPC suite.
dbus-qt3:
PACKAGE NAME: dcron-2.3.3-i486-6.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
dcron: dcron (Dillon's Cron daemon)
dcron:
dcron: The cron daemon runs in the background and executes tasks on behalf of
dcron: users at the appropriate time. Many timed system tasks are started
dcron: with cron, such as the nightly indexing with updatedb.
dcron:
dcron: dcron was written entirely from scratch by Matthew Dillon.
dcron:
PACKAGE NAME: dejavu-fonts-ttf-2.24-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4165 K
PACKAGE SIZE (uncompressed): 8800 K
PACKAGE DESCRIPTION:
dejavu-fonts-ttf: dejavu-fonts-ttf (DejaVu fonts)
dejavu-fonts-ttf:
dejavu-fonts-ttf: The DejaVu fonts are a font family based on the Bitstream Vera Fonts
dejavu-fonts-ttf: (
http://gnome.org/fonts/). Its purpose is to provide a wider range
dejavu-fonts-ttf: of characters (see
http://dejavu.sf.net for more information) while
dejavu-fonts-ttf: maintaining the original look and feel.
dejavu-fonts-ttf:
dejavu-fonts-ttf: DejaVu fonts are based on Bitstream Vera fonts version 1.10.
dejavu-fonts-ttf:
PACKAGE NAME: desktop-file-utils-0.14-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 48 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
desktop-file-utils: desktop-file-utils (Utilities for manipulating desktop files)
desktop-file-utils:
desktop-file-utils: Some utilities from freedesktop.org for handling .desktop files:
desktop-file-utils:
desktop-file-utils: desktop-file-validate: validates a desktop file and prints
desktop-file-utils: warnings/errors about spec violations.
desktop-file-utils: desktop-file-install: installs a desktop file to the applications
desktop-file-utils: directory, optionally munging it a bit in transit.
desktop-file-utils: desktop-menu-tool: loads .vfolder-info and .menu files and does
desktop-file-utils: operations on them.
desktop-file-utils:
PACKAGE NAME: device-mapper-1.02.24-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 410 K
PACKAGE SIZE (uncompressed): 960 K
PACKAGE DESCRIPTION:
device-mapper: device-mapper (device-mapper for logical volume management)
device-mapper:
device-mapper: The goal of device-mapper is to support volume management. The
device-mapper: driver enables the definition of new block devices composed of
device-mapper: ranges of sectors of existing devices. This can be used to define
device-mapper: disk partitions or logical volumes.
device-mapper:
device-mapper: device-mapper is required by LVM2, the Logical Volume Manager.
device-mapper:
PACKAGE NAME: devs-2.3.1-noarch-25.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 106 K
PACKAGE SIZE (uncompressed): 5020 K
PACKAGE DESCRIPTION:
devs: devs (system device files)
devs:
devs: This package creates special files in the /dev directory that
devs: represent your system's hardware, and a tool (/dev/MAKEDEV) for
devs: creating new device files. These files are required to access
devs: hardware on a Linux system.
devs:
PACKAGE NAME: dhcp-3.0.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 707 K
PACKAGE SIZE (uncompressed): 1520 K
PACKAGE DESCRIPTION:
dhcp: dhcp (DHCP server and client utilities)
dhcp:
dhcp: This package provides the ISC's DHCP utilities, including both a
dhcp: server and client. The DHCP protocol allows a host to contact a
dhcp: central server which maintains a list of IP addresses which may be
dhcp: assigned on one or more subnets. A DHCP client may request an
dhcp: address from this pool, and then use it temporarily for communication
dhcp: on the network. The DHCP protocol also provides a mechanism whereby
dhcp: a client can learn important details about the network to which it is
dhcp: attached, such as the location of a default router or name server.
dhcp:
PACKAGE NAME: dhcpcd-2.0.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 50 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
dhcpcd: dhcpcd (DHCP client daemon)
dhcpcd:
dhcpcd: The DHCP client program dhcpcd is used to connect to a network by
dhcpcd: contacting a DHCP server. dhcpcd gets an IP address and other
dhcpcd: information from a corresponding DHCP server, configures the network
dhcpcd: interface automatically, and tries to renew the lease time according
dhcpcd: to RFC2131 or RFC1541 depending on the command line option.
dhcpcd:
PACKAGE NAME: dialog-1.1_20070930-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 125 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
dialog: dialog (display dialog boxes from shell scripts)
dialog:
dialog: Dialog is a program to present a variety of questions or display
dialog: messages using dialog boxes from a shell script. The Slackware
dialog: package management script "pkgtool" uses this, as do various other
dialog: menu-driven console scripts.
dialog:
dialog: Dialog was originally contributed to Slackware by Savio Lam, and has
dialog: been contributed to by many. Dialog is currently maintained by
dialog: Thomas E. Dickey.
dialog:
PACKAGE NAME: diffstat-1.43-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
diffstat: diffstat (produces statistics from diff output)
diffstat:
diffstat: DiffStat is a simple filter that reads the output of the 'diff'
diffstat: program and displays a histogram of insertions, deletions, and
diffstat: modifications per-file. It is useful for reviewing large, complex
diffstat: patch files.
diffstat:
diffstat: Thomas E. Dickey is the author of DiffStat.
diffstat:
PACKAGE NAME: diffutils-2.8.1-i486-3.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 208 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
diffutils: diffutils (finds differences between files)
diffutils:
diffutils: The GNU diff utilities finds differences between files. A major use
diffutils: for this package is to make source code patches.
diffutils:
PACKAGE NAME: dirmngr-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 188 K
PACKAGE SIZE (uncompressed): 450 K
PACKAGE DESCRIPTION:
dirmngr: CRL (Certificate Revocation Lists Manager)
dirmngr:
dirmngr: Dirmngr is a server for managing and downloading certificate
dirmngr: revocation lists (CRLs) for X.509 certificates and for downloading
dirmngr: the certificates themselves. Dirmngr also handles OCSP requests as
dirmngr: an alternative to CRLs. Dirmngr is either invoked internally by
dirmngr: gpgsm (from gnupg 2.x) or when running as a system daemon through
dirmngr: the dirmngr-client tool.
dirmngr:
PACKAGE NAME: distcc-2.18.3-i486-2.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 142 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
distcc: distcc (distributed C/C++ compiler/daemon)
distcc:
distcc: distcc allows compilation of C code to be distributed across several
distcc: machines on a network. distcc should always generate the same results
distcc: as a local compile, is simple to install and use, and is often
distcc: significantly faster than a local compile.
distcc:
distcc: IMPORTANT SECURITY NOTE: distccd should only run on trusted networks.
distcc:
distcc: distcc was written by Martin Pool.
distcc:
PACKAGE NAME: dmapi-2.2.8_1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 35 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
dmapi: dmapi (Data Management API library)
dmapi:
dmapi: A library required to use the Data Management API (DMAPI).
dmapi: This interface is defined in the X/Open document 'Systems Management:
dmapi: Data Storage Managment (XDSM) API' dated February 1997.
dmapi:
dmapi: The DMAPI library is used by the xfsdump utility.
dmapi:
PACKAGE NAME: dmidecode-2.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 53 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
dmidecode: dmidecode (DMI table decoder)
dmidecode:
dmidecode: dmidecode is a tool for dumping a computer's DMI table (some say
dmidecode: SMBIOS) contents in a human-readable format. This table contains a
dmidecode: description of the system's hardware components, as well as other
dmidecode: useful pieces of information such as serial numbers and BIOS
dmidecode: revision.
dmidecode:
dmidecode: dmidecode was written by Alan Cox and Jean Delvare.
dmidecode:
PACKAGE NAME: dmxproto-2.2.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
dmxproto: dmxproto
dmxproto:
dmxproto: dmxproto is part of X11.
dmxproto:
dmxproto: For more information about the X.Org Foundation (the providers of the
dmxproto: X.Org implementation of the X Window System), see their website:
dmxproto:
dmxproto:
http://www.x.org
dmxproto:
PACKAGE NAME: dnsmasq-2.41-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 218 K
PACKAGE SIZE (uncompressed): 500 K
PACKAGE DESCRIPTION:
dnsmasq: dnsmasq (small DNS and DHCP server)
dnsmasq:
dnsmasq: Dnsmasq is a lightweight, easy to configure DNS forwarder and DHCP
dnsmasq: server. It is designed to provide DNS (and optionally DHCP) to a
dnsmasq: small network, and can serve the names of local machines which are not
dnsmasq: in the global DNS.
dnsmasq:
dnsmasq: Dnsmasq was written by Simon Kelley.
dnsmasq:
PACKAGE NAME: dosfstools-2.11-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 47 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
dosfstools: dosfstools (tools for working with FAT filesystems)
dosfstools:
dosfstools: Utilities for creating FAT filesystems (mkdosfs), and for checking
dosfstools: and repairing them (dosfsck).
dosfstools:
PACKAGE NAME: doxygen-1.5.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2883 K
PACKAGE SIZE (uncompressed): 7350 K
PACKAGE DESCRIPTION:
doxygen: doxygen (documentation generator)
doxygen:
doxygen: Doxygen is a documentation system for C++, C, Java, IDL, and to some
doxygen: extent PHP and C#. Doxygen generates project documentation using
doxygen: special documentation blocks in the source code, easing the process of
doxygen: keeping docs and code in sync. Doxygen produces documentation in
doxygen: several output formats, including HTML, LaTeX, man pages, RTF, XML,
doxygen: compressed HTML, PostScript, and PDF.
doxygen:
PACKAGE NAME: dvd+rw-tools-7.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 135 K
PACKAGE SIZE (uncompressed): 330 K
PACKAGE DESCRIPTION:
dvd+rw-tools: dvd+rw-tools (DVD+-RW tools)
dvd+rw-tools:
dvd+rw-tools: A collection of tools to master DVD+RW/+R/-R/-RW media. For further
dvd+rw-tools: information see
http://fy.chalmers.se/~appro/linux/DVD+RW/.
dvd+rw-tools:
dvd+rw-tools: The DVD+RW tools were written by Andy Polyakov.
dvd+rw-tools:
PACKAGE NAME: e2fsprogs-1.40.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 897 K
PACKAGE SIZE (uncompressed): 2350 K
PACKAGE DESCRIPTION:
e2fsprogs: e2fsprogs (ext2 and ext3 filesystems utilities)
e2fsprogs:
e2fsprogs: Utilities needed to create and maintain ext2 and ext3 filesystems.
e2fsprogs:
e2fsprogs: These utilities were written by Remy Card (the developer and
e2fsprogs: maintainer of the ext2 fs) and Theodore T'so.
e2fsprogs:
PACKAGE NAME: ed-0.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 61 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
ed: ed (text editor)
ed:
ed: GNU ed is an 8-bit clean, more or less POSIX-compliant implementation
ed: of the standard Unix line editor. These days, full-screen editors
ed: have rendered 'ed' mostly of historical interest. Nonetheless, it
ed: appeals to a handful of aging programmers who still believe that
ed: "Small is Beautiful".
ed:
PACKAGE NAME: editres-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
editres: editres
editres:
editres: editres is part of X11.
editres:
editres: For more information about the X.Org Foundation (the providers of the
editres: X.Org implementation of the X Window System), see their website:
editres:
editres:
http://www.x.org
editres:
PACKAGE NAME: eject-2.1.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 39 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
eject: eject (a tool to eject removable media)
eject:
eject: Eject allows removable media (typically a DVD, CD, floppy disk, tape,
eject: etc.) to be ejected under software control. The command can also
eject: control some multi-disc changers, the auto-eject feature supported by
eject: some devices, and can close the disc tray of some drives.
eject:
eject: The 'eject' program was written by Jeff Tranter.
eject:
PACKAGE NAME: elm-2.5.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 278 K
PACKAGE SIZE (uncompressed): 730 K
PACKAGE DESCRIPTION:
elm: elm (Menu-driven user mail program)
elm:
elm: Elm is an interactive screen-oriented mailer program originally
elm: written by Dave Taylor, and continued by the Elm Development Group.
elm:
PACKAGE NAME: elvis-2.2_0-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 811 K
PACKAGE SIZE (uncompressed): 2720 K
PACKAGE DESCRIPTION:
elvis: elvis
elvis:
elvis: Elvis is a text editor. It is intended to be a modern replacement
elvis: for the classic ex/vi editor of UNIX fame. Elvis supports many new
elvis: features, including multiple edit buffers, multiple windows, and a
elvis: variety of display modes.
elvis:
elvis: As elvis is Slackware's default vi, this is a required package.
elvis:
PACKAGE NAME: emacs-22.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/e
PACKAGE SIZE (compressed): 33954 K
PACKAGE SIZE (uncompressed): 86150 K
PACKAGE DESCRIPTION:
emacs: emacs (GNU Emacs)
emacs:
emacs: Emacs is the extensible, customizable, self-documenting real-time
emacs: display editor. If this seems to be a bit of a mouthful, an
emacs: easier explanation is that Emacs is a text editor and more. At
emacs: its core is an interpreter for Emacs Lisp, a dialect of the Lisp
emacs: programming language with extensions to support text editing.
emacs: This version supports X.
emacs:
emacs:
http://www.gnu.org/software/emacs/
emacs:
PACKAGE NAME: encodings-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 567 K
PACKAGE SIZE (uncompressed): 680 K
PACKAGE DESCRIPTION:
encodings: encodings
encodings:
encodings: encodings is part of X11.
encodings:
encodings: For more information about the X.Org Foundation (the providers of the
encodings: X.Org implementation of the X Window System), see their website:
encodings:
encodings:
http://www.x.org
encodings:
PACKAGE NAME: enscript-1.6.3-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 430 K
PACKAGE SIZE (uncompressed): 1820 K
PACKAGE DESCRIPTION:
enscript: enscript (converts text files to PostScript and other formats)
enscript:
enscript: Enscript converts text files to PostScript and spools the generated
enscript: output to a printer or saves it to a file. If no input files are
enscript: given, enscript processes standard input. Enscript can be extended to
enscript: handle different output media and it has many options for customizing
enscript: printouts.
enscript:
PACKAGE NAME: epic4-2.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 721 K
PACKAGE SIZE (uncompressed): 2750 K
PACKAGE DESCRIPTION:
epic4: epic4 (Internet Relay Chat client)
epic4:
epic4: EPIC is the (E)nhanced (P)rogrammable (I)RC-II (C)lient.
epic4:
epic4: The EPIC home page is:
http://www.epicsol.org/
epic4: The EPIC main ftp site is:
ftp://ftp.epicsol.org/
epic4: The EPIC IRC channel is: #epic on EFNet
epic4:
PACKAGE NAME: esound-0.2.38-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 113 K
PACKAGE SIZE (uncompressed): 310 K
PACKAGE DESCRIPTION:
esound: esound (Enlightened Sound Daemon)
esound:
esound: EsounD, the Enlightened Sound Daemon, is a server process that mixes
esound: several audio streams for playback by a single audio device. For
esound: example, if you're listening to music on a CD and you receive a
esound: sound-related event from ICQ, the two applications won't have to
esound: jockey for the use of your sound card. Install esound if you'd like
esound: to let sound applications share your audio device.
esound:
PACKAGE NAME: etc-12.1-noarch-4.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 252 K
PACKAGE SIZE (uncompressed): 820 K
PACKAGE DESCRIPTION:
etc: etc (system configuration files)
etc:
etc: System configuration files. The /etc directory is traditionally the
etc: location where configuration files are found.
etc:
PACKAGE NAME: ethtool-5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 51 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
ethtool: ethtool (a tool for examining and tuning a network interface)
ethtool:
ethtool: ethtool is a small utility for examining and tuning your Ethernet
ethtool: based network interface. For more details, see "man ethtool".
ethtool:
ethtool: ethtool was written by David Miller, with help from Jakub Jelinek,
ethtool: Jeff Garzik, Tim Hockin, Eli Kupermann, Chris Leech, Scott Feldman,
ethtool: and Andi Kleen.
ethtool:
PACKAGE NAME: evieext-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
evieext: evieext
evieext:
evieext: evieext is part of X11.
evieext:
evieext: For more information about the X.Org Foundation (the providers of the
evieext: X.Org implementation of the X Window System), see their website:
evieext:
evieext:
http://www.x.org
evieext:
PACKAGE NAME: expat-2.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 169 K
PACKAGE SIZE (uncompressed): 470 K
PACKAGE DESCRIPTION:
expat: expat
expat:
expat: This is Expat, a C library for parsing XML, written by James Clark.
expat: Expat is a stream-oriented XML parser used by Python, GNOME, Xft2,
expat: and other things.
expat:
PACKAGE NAME: expect-5.43.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 517 K
PACKAGE SIZE (uncompressed): 1420 K
PACKAGE DESCRIPTION:
expect: expect
expect:
expect: Expect is a program that talks to other interactive programs according
expect: to a script. Following the script, Expect knows what can be expected
expect: from a program and what the correct response should be. An
expect: interpreted language provides branching and high-level control
expect: structures to direct the dialogue.
expect:
expect: Expect was written by Don Libes of the National Institute of Standards
expect: and Technology.
expect:
PACKAGE NAME: fetchmail-6.3.8-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 727 K
PACKAGE SIZE (uncompressed): 2020 K
PACKAGE DESCRIPTION:
fetchmail: fetchmail (mail retrieval and forwarding utility)
fetchmail:
fetchmail: fetchmail is a mail retrieval and forwarding utility. It fetches
fetchmail: mail from a POP, IMAP, or ETRN-capable remote mailserver and forwards
fetchmail: it to your local (client) machine's delivery system. You can then
fetchmail: handle the retrieved mail using normal mail user agents such as elm,
fetchmail: pine, or mutt. The fetchmail utility can be run in a daemon mode to
fetchmail: repeatedly poll one or more systems at a specified interval.
fetchmail:
fetchmail: fetchmail is probably not secure.
fetchmail:
PACKAGE NAME: file-4.21-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 194 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
file: file (a utility to determine file type)
file:
file: This is Ian F. Darwin's 'file' utility, used to identify files.
file: Christos Zoulas has been file's maintainer since 1994.
file:
PACKAGE NAME: findutils-4.2.31-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 287 K
PACKAGE SIZE (uncompressed): 760 K
PACKAGE DESCRIPTION:
findutils: findutils (utilities to locate files)
findutils:
findutils: This package contains the GNU find and xargs programs. The find and
findutils: xargs implementations comply with POSIX 1003.2. They also support
findutils: some additional options, some borrowed from Unix and some unique to
findutils: GNU.
findutils:
PACKAGE NAME: fixesproto-4.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
fixesproto: fixesproto
fixesproto:
fixesproto: fixesproto is part of X11.
fixesproto:
fixesproto: For more information about the X.Org Foundation (the providers of the
fixesproto: X.Org implementation of the X Window System), see their website:
fixesproto:
fixesproto:
http://www.x.org
fixesproto:
PACKAGE NAME: flac-1.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 1059 K
PACKAGE SIZE (uncompressed): 3000 K
PACKAGE DESCRIPTION:
flac: flac (Free Lossless Audio Codec)
flac:
flac: FLAC stands for Free Lossless Audio Codec. Grossly oversimplified,
flac: FLAC is similar to MP3, but lossless. "Free" means that the
flac: specification of the stream format is in the public domain, and that
flac: neither the FLAC format nor any of the implemented encoding/decoding
flac: methods are covered by any patent. It also means that the sources for
flac: libFLAC and libFLAC++ are available under the LGPL and the sources for
flac: flac, metaflac, and the plugins are available under the GPL.
flac:
flac: FLAC was developed by Josh Coalson.
PACKAGE NAME: flex-2.5.33-i486-3.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 288 K
PACKAGE SIZE (uncompressed): 750 K
PACKAGE DESCRIPTION:
flex: flex (fast lexical analyzer generator)
flex:
flex: flex is a tool for generating programs that perform pattern matching
flex: on text. flex is a rewrite of the AT&T Unix lex tool (the two
flex: implementations do not share any code, though), with some extensions
flex: (and incompatibilities).
flex:
PACKAGE NAME: floppy-5.4-i386-3.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 375 K
PACKAGE SIZE (uncompressed): 720 K
PACKAGE DESCRIPTION:
floppy: floppy (floppy disk utilities)
floppy:
floppy: Contains fdutils-5.4, tools to test and format floppy disks; and
floppy: mtools-3.9.8, a collection of utilities for using DOS/Windows floppy
floppy: disks with Linux.
floppy:
PACKAGE NAME: fluxbox-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1040 K
PACKAGE SIZE (uncompressed): 3100 K
PACKAGE DESCRIPTION:
fluxbox: fluxbox (Fluxbox window manager)
fluxbox:
fluxbox: Fluxbox is yet another windowmanager for X that is based on blackbox
fluxbox: but with many new features.
fluxbox:
PACKAGE NAME: font-adobe-100dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6210 K
PACKAGE SIZE (uncompressed): 7050 K
PACKAGE DESCRIPTION:
font-adobe-100dpi: font-adobe-100dpi
font-adobe-100dpi:
font-adobe-100dpi: font-adobe-100dpi is part of X11.
font-adobe-100dpi:
font-adobe-100dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-100dpi: X.Org implementation of the X Window System), see their website:
font-adobe-100dpi:
font-adobe-100dpi:
http://www.x.org
font-adobe-100dpi:
PACKAGE NAME: font-adobe-75dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5513 K
PACKAGE SIZE (uncompressed): 6350 K
PACKAGE DESCRIPTION:
font-adobe-75dpi: font-adobe-75dpi
font-adobe-75dpi:
font-adobe-75dpi: font-adobe-75dpi is part of X11.
font-adobe-75dpi:
font-adobe-75dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-75dpi: X.Org implementation of the X Window System), see their website:
font-adobe-75dpi:
font-adobe-75dpi:
http://www.x.org
font-adobe-75dpi:
PACKAGE NAME: font-adobe-utopia-100dpi-1.0.1-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1452 K
PACKAGE SIZE (uncompressed): 1640 K
PACKAGE DESCRIPTION:
font-adobe-utopia-100dpi: font-adobe-utopia-100dpi
font-adobe-utopia-100dpi:
font-adobe-utopia-100dpi: font-adobe-utopia-100dpi is part of X11.
font-adobe-utopia-100dpi:
font-adobe-utopia-100dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-utopia-100dpi: X.Org implementation of the X Window System), see their website:
font-adobe-utopia-100dpi:
font-adobe-utopia-100dpi:
http://www.x.org
font-adobe-utopia-100dpi:
PACKAGE NAME: font-adobe-utopia-75dpi-1.0.1-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1206 K
PACKAGE SIZE (uncompressed): 1390 K
PACKAGE DESCRIPTION:
font-adobe-utopia-75dpi: font-adobe-utopia-75dpi
font-adobe-utopia-75dpi:
font-adobe-utopia-75dpi: font-adobe-utopia-75dpi is part of X11.
font-adobe-utopia-75dpi:
font-adobe-utopia-75dpi: For more information about the X.Org Foundation (the providers of the
font-adobe-utopia-75dpi: X.Org implementation of the X Window System), see their website:
font-adobe-utopia-75dpi:
font-adobe-utopia-75dpi:
http://www.x.org
font-adobe-utopia-75dpi:
PACKAGE NAME: font-adobe-utopia-type1-1.0.1-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 196 K
PACKAGE SIZE (uncompressed): 390 K
PACKAGE DESCRIPTION:
font-adobe-utopia-type1: font-adobe-utopia-type1
font-adobe-utopia-type1:
font-adobe-utopia-type1: font-adobe-utopia-type1 is part of X11.
font-adobe-utopia-type1:
font-adobe-utopia-type1: For more information about the X.Org Foundation (the providers of the
font-adobe-utopia-type1: X.Org implementation of the X Window System), see their website:
font-adobe-utopia-type1:
font-adobe-utopia-type1:
http://www.x.org
font-adobe-utopia-type1:
PACKAGE NAME: font-alias-1.0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
font-alias: font-alias
font-alias:
font-alias: font-alias is part of X11.
font-alias:
font-alias: For more information about the X.Org Foundation (the providers of the
font-alias: X.Org implementation of the X Window System), see their website:
font-alias:
font-alias:
http://www.x.org
font-alias:
PACKAGE NAME: font-arabic-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
font-arabic-misc: font-arabic-misc
font-arabic-misc:
font-arabic-misc: font-arabic-misc is part of X11.
font-arabic-misc:
font-arabic-misc: For more information about the X.Org Foundation (the providers of the
font-arabic-misc: X.Org implementation of the X Window System), see their website:
font-arabic-misc:
font-arabic-misc:
http://www.x.org
font-arabic-misc:
PACKAGE NAME: font-bh-100dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3763 K
PACKAGE SIZE (uncompressed): 4250 K
PACKAGE DESCRIPTION:
font-bh-100dpi: font-bh-100dpi
font-bh-100dpi:
font-bh-100dpi: font-bh-100dpi is part of X11.
font-bh-100dpi:
font-bh-100dpi: For more information about the X.Org Foundation (the providers of the
font-bh-100dpi: X.Org implementation of the X Window System), see their website:
font-bh-100dpi:
font-bh-100dpi:
http://www.x.org
font-bh-100dpi:
PACKAGE NAME: font-bh-75dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3238 K
PACKAGE SIZE (uncompressed): 3730 K
PACKAGE DESCRIPTION:
font-bh-75dpi: font-bh-75dpi
font-bh-75dpi:
font-bh-75dpi: font-bh-75dpi is part of X11.
font-bh-75dpi:
font-bh-75dpi: For more information about the X.Org Foundation (the providers of the
font-bh-75dpi: X.Org implementation of the X Window System), see their website:
font-bh-75dpi:
font-bh-75dpi:
http://www.x.org
font-bh-75dpi:
PACKAGE NAME: font-bh-lucidatypewriter-100dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 843 K
PACKAGE SIZE (uncompressed): 980 K
PACKAGE DESCRIPTION:
font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi
font-bh-lucidatypewriter-100dpi:
font-bh-lucidatypewriter-100dpi: font-bh-lucidatypewriter-100dpi is part of X11.
font-bh-lucidatypewriter-100dpi:
font-bh-lucidatypewriter-100dpi: For more information about the X.Org Foundation (the providers of the
font-bh-lucidatypewriter-100dpi: X.Org implementation of the X Window System), see their website:
font-bh-lucidatypewriter-100dpi:
font-bh-lucidatypewriter-100dpi:
http://www.x.org
font-bh-lucidatypewriter-100dpi:
PACKAGE NAME: font-bh-lucidatypewriter-75dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 738 K
PACKAGE SIZE (uncompressed): 870 K
PACKAGE DESCRIPTION:
font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi
font-bh-lucidatypewriter-75dpi:
font-bh-lucidatypewriter-75dpi: font-bh-lucidatypewriter-75dpi is part of X11.
font-bh-lucidatypewriter-75dpi:
font-bh-lucidatypewriter-75dpi: For more information about the X.Org Foundation (the providers of the
font-bh-lucidatypewriter-75dpi: X.Org implementation of the X Window System), see their website:
font-bh-lucidatypewriter-75dpi:
font-bh-lucidatypewriter-75dpi:
http://www.x.org
font-bh-lucidatypewriter-75dpi:
PACKAGE NAME: font-bh-ttf-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 416 K
PACKAGE SIZE (uncompressed): 920 K
PACKAGE DESCRIPTION:
font-bh-ttf: font-bh-ttf
font-bh-ttf:
font-bh-ttf: font-bh-ttf is part of X11.
font-bh-ttf:
font-bh-ttf: For more information about the X.Org Foundation (the providers of the
font-bh-ttf: X.Org implementation of the X Window System), see their website:
font-bh-ttf:
font-bh-ttf:
http://www.x.org
font-bh-ttf:
PACKAGE NAME: font-bh-type1-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 641 K
PACKAGE SIZE (uncompressed): 1300 K
PACKAGE DESCRIPTION:
font-bh-type1: font-bh-type1
font-bh-type1:
font-bh-type1: font-bh-type1 is part of X11.
font-bh-type1:
font-bh-type1: For more information about the X.Org Foundation (the providers of the
font-bh-type1: X.Org implementation of the X Window System), see their website:
font-bh-type1:
font-bh-type1:
http://www.x.org
font-bh-type1:
PACKAGE NAME: font-bitstream-100dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 157 K
PACKAGE SIZE (uncompressed): 190 K
PACKAGE DESCRIPTION:
font-bitstream-100dpi: font-bitstream-100dpi
font-bitstream-100dpi:
font-bitstream-100dpi: font-bitstream-100dpi is part of X11.
font-bitstream-100dpi:
font-bitstream-100dpi: For more information about the X.Org Foundation (the providers of the
font-bitstream-100dpi: X.Org implementation of the X Window System), see their website:
font-bitstream-100dpi:
font-bitstream-100dpi:
http://www.x.org
font-bitstream-100dpi:
PACKAGE NAME: font-bitstream-75dpi-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 138 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
font-bitstream-75dpi: font-bitstream-75dpi
font-bitstream-75dpi:
font-bitstream-75dpi: font-bitstream-75dpi is part of X11.
font-bitstream-75dpi:
font-bitstream-75dpi: For more information about the X.Org Foundation (the providers of the
font-bitstream-75dpi: X.Org implementation of the X Window System), see their website:
font-bitstream-75dpi:
font-bitstream-75dpi:
http://www.x.org
font-bitstream-75dpi:
PACKAGE NAME: font-bitstream-speedo-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 358 K
PACKAGE SIZE (uncompressed): 550 K
PACKAGE DESCRIPTION:
font-bitstream-speedo: font-bitstream-speedo
font-bitstream-speedo:
font-bitstream-speedo: font-bitstream-speedo is part of X11.
font-bitstream-speedo:
font-bitstream-speedo: For more information about the X.Org Foundation (the providers of the
font-bitstream-speedo: X.Org implementation of the X Window System), see their website:
font-bitstream-speedo:
font-bitstream-speedo:
http://www.x.org
font-bitstream-speedo:
PACKAGE NAME: font-bitstream-type1-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 322 K
PACKAGE SIZE (uncompressed): 460 K
PACKAGE DESCRIPTION:
font-bitstream-type1: font-bitstream-type1
font-bitstream-type1:
font-bitstream-type1: font-bitstream-type1 is part of X11.
font-bitstream-type1:
font-bitstream-type1: For more information about the X.Org Foundation (the providers of the
font-bitstream-type1: X.Org implementation of the X Window System), see their website:
font-bitstream-type1:
font-bitstream-type1:
http://www.x.org
font-bitstream-type1:
PACKAGE NAME: font-cronyx-cyrillic-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 296 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
font-cronyx-cyrillic: font-cronyx-cyrillic
font-cronyx-cyrillic:
font-cronyx-cyrillic: font-cronyx-cyrillic is part of X11.
font-cronyx-cyrillic:
font-cronyx-cyrillic: For more information about the X.Org Foundation (the providers of the
font-cronyx-cyrillic: X.Org implementation of the X Window System), see their website:
font-cronyx-cyrillic:
font-cronyx-cyrillic:
http://www.x.org
font-cronyx-cyrillic:
PACKAGE NAME: font-cursor-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
font-cursor-misc: font-cursor-misc
font-cursor-misc:
font-cursor-misc: font-cursor-misc is part of X11.
font-cursor-misc:
font-cursor-misc: For more information about the X.Org Foundation (the providers of the
font-cursor-misc: X.Org implementation of the X Window System), see their website:
font-cursor-misc:
font-cursor-misc:
http://www.x.org
font-cursor-misc:
PACKAGE NAME: font-daewoo-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 662 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
font-daewoo-misc: font-daewoo-misc
font-daewoo-misc:
font-daewoo-misc: font-daewoo-misc is part of X11.
font-daewoo-misc:
font-daewoo-misc: For more information about the X.Org Foundation (the providers of the
font-daewoo-misc: X.Org implementation of the X Window System), see their website:
font-daewoo-misc:
font-daewoo-misc:
http://www.x.org
font-daewoo-misc:
PACKAGE NAME: font-dec-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
font-dec-misc: font-dec-misc
font-dec-misc:
font-dec-misc: font-dec-misc is part of X11.
font-dec-misc:
font-dec-misc: For more information about the X.Org Foundation (the providers of the
font-dec-misc: X.Org implementation of the X Window System), see their website:
font-dec-misc:
font-dec-misc:
http://www.x.org
font-dec-misc:
PACKAGE NAME: font-ibm-type1-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 313 K
PACKAGE SIZE (uncompressed): 630 K
PACKAGE DESCRIPTION:
font-ibm-type1: font-ibm-type1
font-ibm-type1:
font-ibm-type1: font-ibm-type1 is part of X11.
font-ibm-type1:
font-ibm-type1: For more information about the X.Org Foundation (the providers of the
font-ibm-type1: X.Org implementation of the X Window System), see their website:
font-ibm-type1:
font-ibm-type1:
http://www.x.org
font-ibm-type1:
PACKAGE NAME: font-isas-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 788 K
PACKAGE SIZE (uncompressed): 940 K
PACKAGE DESCRIPTION:
font-isas-misc: font-isas-misc
font-isas-misc:
font-isas-misc: font-isas-misc is part of X11.
font-isas-misc:
font-isas-misc: For more information about the X.Org Foundation (the providers of the
font-isas-misc: X.Org implementation of the X Window System), see their website:
font-isas-misc:
font-isas-misc:
http://www.x.org
font-isas-misc:
PACKAGE NAME: font-jis-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 527 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
font-jis-misc: font-jis-misc
font-jis-misc:
font-jis-misc: font-jis-misc is part of X11.
font-jis-misc:
font-jis-misc: For more information about the X.Org Foundation (the providers of the
font-jis-misc: X.Org implementation of the X Window System), see their website:
font-jis-misc:
font-jis-misc:
http://www.x.org
font-jis-misc:
PACKAGE NAME: font-micro-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
font-micro-misc: font-micro-misc
font-micro-misc:
font-micro-misc: font-micro-misc is part of X11.
font-micro-misc:
font-micro-misc: For more information about the X.Org Foundation (the providers of the
font-micro-misc: X.Org implementation of the X Window System), see their website:
font-micro-misc:
font-micro-misc:
http://www.x.org
font-micro-misc:
PACKAGE NAME: font-misc-cyrillic-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 66 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
font-misc-cyrillic: font-misc-cyrillic
font-misc-cyrillic:
font-misc-cyrillic: font-misc-cyrillic is part of X11.
font-misc-cyrillic:
font-misc-cyrillic: For more information about the X.Org Foundation (the providers of the
font-misc-cyrillic: X.Org implementation of the X Window System), see their website:
font-misc-cyrillic:
font-misc-cyrillic:
http://www.x.org
font-misc-cyrillic:
PACKAGE NAME: font-misc-ethiopic-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 146 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
font-misc-ethiopic: font-misc-ethiopic
font-misc-ethiopic:
font-misc-ethiopic: font-misc-ethiopic is part of X11.
font-misc-ethiopic:
font-misc-ethiopic: For more information about the X.Org Foundation (the providers of the
font-misc-ethiopic: X.Org implementation of the X Window System), see their website:
font-misc-ethiopic:
font-misc-ethiopic:
http://www.x.org
font-misc-ethiopic:
PACKAGE NAME: font-misc-meltho-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1812 K
PACKAGE SIZE (uncompressed): 5670 K
PACKAGE DESCRIPTION:
font-misc-meltho: font-misc-meltho
font-misc-meltho:
font-misc-meltho: font-misc-meltho is part of X11.
font-misc-meltho:
font-misc-meltho: For more information about the X.Org Foundation (the providers of the
font-misc-meltho: X.Org implementation of the X Window System), see their website:
font-misc-meltho:
font-misc-meltho:
http://www.x.org
font-misc-meltho:
PACKAGE NAME: font-misc-misc-1.0.0-noarch-3.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3576 K
PACKAGE SIZE (uncompressed): 4380 K
PACKAGE DESCRIPTION:
font-misc-misc: font-misc-misc
font-misc-misc:
font-misc-misc: font-misc-misc is part of X11.
font-misc-misc:
font-misc-misc: For more information about the X.Org Foundation (the providers of the
font-misc-misc: X.Org implementation of the X Window System), see their website:
font-misc-misc:
font-misc-misc:
http://www.x.org
font-misc-misc:
PACKAGE NAME: font-mutt-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 206 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
font-mutt-misc: font-mutt-misc
font-mutt-misc:
font-mutt-misc: font-mutt-misc is part of X11.
font-mutt-misc:
font-mutt-misc: For more information about the X.Org Foundation (the providers of the
font-mutt-misc: X.Org implementation of the X Window System), see their website:
font-mutt-misc:
font-mutt-misc:
http://www.x.org
font-mutt-misc:
PACKAGE NAME: font-schumacher-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 156 K
PACKAGE SIZE (uncompressed): 210 K
PACKAGE DESCRIPTION:
font-schumacher-misc: font-schumacher-misc
font-schumacher-misc:
font-schumacher-misc: font-schumacher-misc is part of X11.
font-schumacher-misc:
font-schumacher-misc: For more information about the X.Org Foundation (the providers of the
font-schumacher-misc: X.Org implementation of the X Window System), see their website:
font-schumacher-misc:
font-schumacher-misc:
http://www.x.org
font-schumacher-misc:
PACKAGE NAME: font-screen-cyrillic-1.0.1-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
font-screen-cyrillic: font-screen-cyrillic
font-screen-cyrillic:
font-screen-cyrillic: font-screen-cyrillic is part of X11.
font-screen-cyrillic:
font-screen-cyrillic: For more information about the X.Org Foundation (the providers of the
font-screen-cyrillic: X.Org implementation of the X Window System), see their website:
font-screen-cyrillic:
font-screen-cyrillic:
http://www.x.org
font-screen-cyrillic:
PACKAGE NAME: font-sony-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
font-sony-misc: font-sony-misc
font-sony-misc:
font-sony-misc: font-sony-misc is part of X11.
font-sony-misc:
font-sony-misc: For more information about the X.Org Foundation (the providers of the
font-sony-misc: X.Org implementation of the X Window System), see their website:
font-sony-misc:
font-sony-misc:
http://www.x.org
font-sony-misc:
PACKAGE NAME: font-sun-misc-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 26 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
font-sun-misc: font-sun-misc
font-sun-misc:
font-sun-misc: font-sun-misc is part of X11.
font-sun-misc:
font-sun-misc: For more information about the X.Org Foundation (the providers of the
font-sun-misc: X.Org implementation of the X Window System), see their website:
font-sun-misc:
font-sun-misc:
http://www.x.org
font-sun-misc:
PACKAGE NAME: font-util-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 28 K
PACKAGE SIZE (uncompressed): 230 K
PACKAGE DESCRIPTION:
font-util: font-util
font-util:
font-util: font-util is part of X11.
font-util:
font-util: For more information about the X.Org Foundation (the providers of the
font-util: X.Org implementation of the X Window System), see their website:
font-util:
font-util:
http://www.x.org
font-util:
PACKAGE NAME: font-winitzki-cyrillic-1.0.0-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
font-winitzki-cyrillic: font-winitzki-cyrillic
font-winitzki-cyrillic:
font-winitzki-cyrillic: font-winitzki-cyrillic is part of X11.
font-winitzki-cyrillic:
font-winitzki-cyrillic: For more information about the X.Org Foundation (the providers of the
font-winitzki-cyrillic: X.Org implementation of the X Window System), see their website:
font-winitzki-cyrillic:
font-winitzki-cyrillic:
http://www.x.org
font-winitzki-cyrillic:
PACKAGE NAME: font-xfree86-type1-1.0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 31 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
font-xfree86-type1: font-xfree86-type1
font-xfree86-type1:
font-xfree86-type1: font-xfree86-type1 is part of X11.
font-xfree86-type1:
font-xfree86-type1: For more information about the X.Org Foundation (the providers of the
font-xfree86-type1: X.Org implementation of the X Window System), see their website:
font-xfree86-type1:
font-xfree86-type1:
http://www.x.org
font-xfree86-type1:
PACKAGE NAME: fontcacheproto-0.1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
fontcacheproto: fontcacheproto
fontcacheproto:
fontcacheproto: fontcacheproto is part of X11.
fontcacheproto:
fontcacheproto: For more information about the X.Org Foundation (the providers of the
fontcacheproto: X.Org implementation of the X Window System), see their website:
fontcacheproto:
fontcacheproto:
http://www.x.org
fontcacheproto:
PACKAGE NAME: fontconfig-2.4.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 302 K
PACKAGE SIZE (uncompressed): 750 K
PACKAGE DESCRIPTION:
fontconfig: fontconfig (Font library and tools)
fontconfig:
fontconfig: Fontconfig is a library and tools designed to provide system-wide
fontconfig: font configuration, customization, and application access.
fontconfig:
fontconfig: Fontconfig is written and maintained by Keith Packard.
fontconfig:
PACKAGE NAME: fontsproto-2.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
fontsproto: fontsproto
fontsproto:
fontsproto: fontsproto is part of X11.
fontsproto:
fontsproto: For more information about the X.Org Foundation (the providers of the
fontsproto: X.Org implementation of the X Window System), see their website:
fontsproto:
fontsproto:
http://www.x.org
fontsproto:
PACKAGE NAME: fonttosfnt-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
fonttosfnt: fonttosfnt
fonttosfnt:
fonttosfnt: fonttosfnt is part of X11.
fonttosfnt:
fonttosfnt: For more information about the X.Org Foundation (the providers of the
fonttosfnt: X.Org implementation of the X Window System), see their website:
fonttosfnt:
fonttosfnt:
http://www.x.org
fonttosfnt:
PACKAGE NAME: foomatic-filters-3.0_20080211-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 119 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
foomatic-filters: foomatic-filters (Universal print filter/RIP wrapper)
foomatic-filters:
foomatic-filters: foomatic-rip is a universal print filter, which is used by CUPS with
foomatic-filters: the gutenprint and hplip printer drivers. It translates PostScript
foomatic-filters: (and also other file formats) to the printer's native language,
foomatic-filters: usually using Ghostscript (gs) as the external renderer. The way
foomatic-filters: this translation is done is described in a PPD file.
foomatic-filters:
foomatic-filters: For more information on foomatic, see:
http://linuxprinting.org
foomatic-filters:
PACKAGE NAME: freetype-2.3.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 448 K
PACKAGE SIZE (uncompressed): 1660 K
PACKAGE DESCRIPTION:
freetype: freetype (A Free, High-Quality, and Portable Font Engine)
freetype:
freetype: The FreeType engine is a free and portable TrueType font rendering
freetype: engine. It has been developed to provide TrueType support to a
freetype: great variety of platforms and environments.
freetype:
PACKAGE NAME: fribidi-0.10.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 260 K
PACKAGE DESCRIPTION:
fribidi: fribidi (Unicode BiDirectional algorithm library)
fribidi:
fribidi: This library implements the Unicode BiDirectional algorithm, which
fribidi: is needed in order to support right-to-left languages such as Arabic
fribidi: and Hebrew. It is used in display software like KDE's SVG modules.
fribidi:
PACKAGE NAME: fslsfonts-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
fslsfonts: fslsfonts
fslsfonts:
fslsfonts: fslsfonts is part of X11.
fslsfonts:
fslsfonts: For more information about the X.Org Foundation (the providers of the
fslsfonts: X.Org implementation of the X Window System), see their website:
fslsfonts:
fslsfonts:
http://www.x.org
fslsfonts:
PACKAGE NAME: fstobdf-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
fstobdf: fstobdf
fstobdf:
fstobdf: fstobdf is part of X11.
fstobdf:
fstobdf: For more information about the X.Org Foundation (the providers of the
fstobdf: X.Org implementation of the X Window System), see their website:
fstobdf:
fstobdf:
http://www.x.org
fstobdf:
PACKAGE NAME: fuse-2.7.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 130 K
PACKAGE SIZE (uncompressed): 430 K
PACKAGE DESCRIPTION:
fuse: FUSE (Filesystem in Userspace)
fuse:
fuse: FUSE is a simple interface for userspace programs to export a virtual
fuse: filesystem to the Linux kernel. FUSE also aims to provide a secure
fuse: method for non privileged users to create and mount their own
fuse: filesystem implementations.
fuse:
fuse: The FUSE web site can be found here:
http://fuse.sourceforge.net
fuse:
PACKAGE NAME: fvwm-2.4.20-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1375 K
PACKAGE SIZE (uncompressed): 3260 K
PACKAGE DESCRIPTION:
fvwm: fvwm (a small and fast virtual window manager for X)
fvwm:
fvwm: Fvwm is the classic highly-configurable virtual window manager for
fvwm: X11. It is a derivative of twm, redesigned to minimize memory
fvwm: consumption, provide a 3-D look to window frames, and provide a simple
fvwm: virtual desktop.
fvwm:
PACKAGE NAME: gamin-0.1.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 108 K
PACKAGE SIZE (uncompressed): 380 K
PACKAGE DESCRIPTION:
gamin: gamin (A minimalist FAM replacement)
gamin:
gamin: Gamin is a file and directory monitoring system defined to be a subset
gamin: of the FAM (File Alteration Monitor) system.
gamin:
gamin: The homepage for Gamin is:
http://www.gnome.org/~veillard/gamin/
gamin:
PACKAGE NAME: gawk-3.1.5-i486-3.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 962 K
PACKAGE SIZE (uncompressed): 1930 K
PACKAGE DESCRIPTION:
gawk: gawk (pattern scanning and processing language)
gawk:
gawk: Gawk is the GNU Project's implementation of the AWK programming
gawk: language. It conforms to the definition of the language in the POSIX
gawk: 1003.2 Command Language And Utilities Standard. This version in turn
gawk: is based on the description in The AWK Programming Language, by Aho,
gawk: Kernighan, and Weinberger, with the additional features found in the
gawk: System V Release 4 version of UNIX awk. Gawk also provides more
gawk: recent Bell Labs awk extensions, and some GNU-specific extensions.
gawk:
PACKAGE NAME: gcc-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 6138 K
PACKAGE SIZE (uncompressed): 15350 K
PACKAGE DESCRIPTION:
gcc: gcc (Base GCC package with C support)
gcc:
gcc: GCC is the GNU Compiler Collection.
gcc:
gcc: This package contains those parts of the compiler collection needed to
gcc: compile C code. Other packages add C++, Fortran, Objective-C, and
gcc: Java support to the compiler core.
gcc:
PACKAGE NAME: gcc-g++-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 16874 K
PACKAGE SIZE (uncompressed): 86710 K
PACKAGE DESCRIPTION:
gcc-g++: gcc-g++ (C++ for GCC)
gcc-g++:
gcc-g++: C++ support for the GNU Compiler Collection.
gcc-g++:
gcc-g++: This package contains those parts of the compiler collection needed to
gcc-g++: compile C++ code. The base gcc package is also required.
gcc-g++:
PACKAGE NAME: gcc-gfortran-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2777 K
PACKAGE SIZE (uncompressed): 6820 K
PACKAGE DESCRIPTION:
gcc-gfortran: gcc-gfortran (Fortran support for GCC)
gcc-gfortran:
gcc-gfortran: This package contains those parts of the compiler collection
gcc-gfortran: needed to compile Fortran code. The base gcc package is also
gcc-gfortran: required.
gcc-gfortran:
gcc-gfortran: Its primary base is the ANSI FORTRAN 95 standard, with some
gcc-gfortran: some extensions popularized by the 'f77' and 'f2c' compilers,
gcc-gfortran: other compilers (such as Digital products), and the Fortran 90
gcc-gfortran: standard.
gcc-gfortran:
PACKAGE NAME: gcc-gnat-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 11929 K
PACKAGE SIZE (uncompressed): 39010 K
PACKAGE DESCRIPTION:
gcc-gnat: gcc-gnat (Ada support for GCC)
gcc-gnat:
gcc-gnat: Ada 95 support for the GNU Compiler Collection.
gcc-gnat:
gcc-gnat: This package contains those parts of the compiler collection needed to
gcc-gnat: compile Ada 95 code. Ada95 is the object oriented successor to the
gcc-gnat: Ada83 language. The base gcc package is also required.
gcc-gnat:
PACKAGE NAME: gcc-java-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 31175 K
PACKAGE SIZE (uncompressed): 93800 K
PACKAGE DESCRIPTION:
gcc-java: gcc-java (Java support for GCC)
gcc-java:
gcc-java: Java support for the GNU Compiler Collection.
gcc-java:
gcc-java: This package contains those parts of the compiler collection needed to
gcc-java: compile programs written in the Java programming language. The base
gcc-java: gcc package is also required.
gcc-java:
PACKAGE NAME: gcc-objc-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2210 K
PACKAGE SIZE (uncompressed): 5020 K
PACKAGE DESCRIPTION:
gcc-objc: gcc-objc (Objective-C support for GCC)
gcc-objc:
gcc-objc: Objective-C support for the GNU Compiler Collection.
gcc-objc:
gcc-objc: This package contains those parts of the compiler collection needed to
gcc-objc: compile code written in Objective-C. Objective-C was originally
gcc-objc: developed to add object-oriented extensions to the C language, and is
gcc-objc: best known as the native language of the NeXT computer.
gcc-objc:
gcc-objc: The base gcc package is also required.
gcc-objc:
PACKAGE NAME: gccmakedep-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 10 K
PACKAGE DESCRIPTION:
gccmakedep: gccmakedep
gccmakedep:
gccmakedep: gccmakedep is part of X11.
gccmakedep:
gccmakedep: For more information about the X.Org Foundation (the providers of the
gccmakedep: X.Org implementation of the X Window System), see their website:
gccmakedep:
gccmakedep:
http://www.x.org
gccmakedep:
PACKAGE NAME: gd-2.0.35-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 171 K
PACKAGE SIZE (uncompressed): 660 K
PACKAGE DESCRIPTION:
gd: gd (a graphics library)
gd:
gd: gd is a graphics library. It allows your code to quickly draw images
gd: complete with lines, arcs, text, multiple colors, cut and paste from
gd: other images, and flood fills, and write out the result as a PNG or
gd: JPEG file. This is particularly useful in web applications, where
gd: PNG and JPEG are two of the formats accepted for inline images by
gd: most browsers.
gd:
gd: The gd library was written by Thomas Boutell.
gd:
PACKAGE NAME: gdb-6.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2252 K
PACKAGE SIZE (uncompressed): 4860 K
PACKAGE DESCRIPTION:
gdb: gdb (the GNU symbolic debugger)
gdb: GDB, the GNU Project debugger, allows you to see what is going on
gdb: inside another program while it executes -- or what another program
gdb: was doing at the moment it crashed. GDB can do four main kinds of
gdb: things to help you catch bugs in the act: 1) Start your program,
gdb: specifying anything that might affect its behavior. 2) Make your
gdb: program stop on specified conditions. 3) Examine what has happened,
gdb: when your program has stopped. 4) Change things in your program, so
gdb: you can experiment with correcting the effects of one bug and go on
gdb: to learn about another. The program being debugged can be written in
gdb: Ada, C, C++, Objective-C, Pascal and many other languages.
PACKAGE NAME: gdbm-1.8.3-i486-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 51 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
gdbm: gdbm (GNU database routines)
gdbm:
gdbm: GNU dbm is a set of database routines that work similar to the
gdbm: standard UNIX dbm routines.
gdbm:
PACKAGE NAME: genpower-1.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 48 K
PACKAGE SIZE (uncompressed): 160 K
PACKAGE DESCRIPTION:
genpower: genpower (UPS monitoring daemon)
genpower:
genpower: The genpower daemon, genpowerd, will monitor the status of a serial
genpower: line connected to a UPS (Uninterruptible Power Supply). If a power
genpower: failure is detected, genpowerd will notify the system to take the
genpower: needed steps to react to the condition of the UPS. This may include
genpower: shutting the system down, or canceling a pending shutdown if the
genpower: power is restored.
genpower:
PACKAGE NAME: getmail-4.7.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 200 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
getmail: getmail (POP3 mail retriever)
getmail:
getmail: getmail is a POP3 mail retriever, with support for both ordinary and
getmail: domain (or multidrop) POP3 mailboxes. It is written in Python, and
getmail: licensed under the GNU General Public License version 2.
getmail:
getmail: getmail was written by Charles Cazabon.
getmail:
PACKAGE NAME: gettext-0.17-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 135 K
PACKAGE SIZE (uncompressed): 740 K
PACKAGE DESCRIPTION:
gettext: gettext (internationalization framework)
gettext:
gettext: The GNU gettext package contains "gettext" and "ngettext", programs
gettext: that are used to internationalize the messages given by shell scripts.
gettext:
PACKAGE NAME: gettext-tools-0.17-i486-2.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 3059 K
PACKAGE SIZE (uncompressed): 8020 K
PACKAGE DESCRIPTION:
gettext-tools: gettext-tools (internationalization framework tools)
gettext-tools:
gettext-tools: The GNU gettext-tools package is useful for authors and maintainers of
gettext-tools: internationalized software, or for anyone compiling programs that
gettext-tools: use the gettext functions. This package provides the needed tools and
gettext-tools: library functions for the handling of messages in different languages.
gettext-tools: Some other GNU packages use the gettext program (included in this
gettext-tools: package) to internationalize the messages given by shell scripts.
gettext-tools:
PACKAGE NAME: getty-ps-2.1.0b-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 76 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
getty-ps: getty-ps
getty-ps:
getty-ps: /sbin/getty and /sbin/uugetty.
getty-ps: These control the process of logging into your system, and may be used
getty-ps: instead of 'agetty', which is the default getty included with the
getty-ps: util-linux package. getty-ps supports a number of enhancements such as
getty-ps: ringback support.
getty-ps:
getty-ps: getty-ps was originally written by Paul Sutcliffe, Jr, and is
getty-ps: currently maintained by Christine Jamison.
getty-ps:
PACKAGE NAME: gftp-2.0.18-i486-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 985 K
PACKAGE SIZE (uncompressed): 2860 K
PACKAGE DESCRIPTION:
gftp: gftp
gftp:
gftp: gFTP is a multithreaded FTP client for X written using GTK+. It
gftp: features simultaneous downloads, resuming of interrupted file
gftp: transfers, file transfer queues, downloading of entire directories,
gftp: ftp proxy support, remote directory caching, passive and non-passive
gftp: file transfers, drag-n-drop support, bookmarks menu, stop button,
gftp: and many more features.
gftp:
PACKAGE NAME: ghostscript-8.62-i486-5.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 10266 K
PACKAGE SIZE (uncompressed): 29720 K
PACKAGE DESCRIPTION:
ghostscript: ghostscript (GPL Ghostscript)
ghostscript:
ghostscript: GPL Ghostscript is an interpreter of Adobe Systems' PostScript(tm)
ghostscript: and Portable Document Format (PDF) languages. Ghostscript is an
ghostscript: essential part of the printing subsystem, taking PostScript output
ghostscript: from applications and converting it into an appropriate printer or
ghostscript: display format. Ghostscript supports many printers directly, and
ghostscript: more are supported through add-on packages.
ghostscript:
PACKAGE NAME: ghostscript-fonts-std-8.11-noarch-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 3658 K
PACKAGE SIZE (uncompressed): 4830 K
PACKAGE DESCRIPTION:
ghostscript-fonts-std: ghostscript-fonts-std (fonts for the Ghostscript interpreter)
ghostscript-fonts-std:
ghostscript-fonts-std: These fonts are used by the GhostScript interpreter.
ghostscript-fonts-std:
PACKAGE NAME: gimp-2.4.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 15066 K
PACKAGE SIZE (uncompressed): 46370 K
PACKAGE DESCRIPTION:
gimp: gimp (The GNU Image Manipulation Program)
gimp:
gimp: The GIMP is a powerful tool for the preparation and manipulation of
gimp: digital images. The GIMP provides the user with a wide variety of
gimp: image manipulation, painting, processing, and rendering tools. The
gimp: GIMP's open design and extensible architecture make for a very
gimp: powerful end product for photo and image retouching, web graphics
gimp: design, or digital illustration.
gimp:
PACKAGE NAME: gimp-help-2-0.8-noarch-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 17365 K
PACKAGE SIZE (uncompressed): 28080 K
PACKAGE DESCRIPTION:
gimp-help-2: gimp-help-2 (documentation for GIMP)
gimp-help-2:
gimp-help-2: This package contains documentation for the GIMP image editor's
gimp-help-2: built-in help system.
gimp-help-2:
PACKAGE NAME: git-1.5.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 3395 K
PACKAGE SIZE (uncompressed): 8120 K
PACKAGE DESCRIPTION:
git: git (the stupid content tracker)
git:
git: Git is a fast, scalable, distributed revision control system with an
git: unusually rich command set that provides both high-level operations
git: and full access to internals.
git:
git: "git" can mean anything, depending on your mood.
git:
git: Git was originally written by Linus Torvalds and is currently
git: maintained by Junio C. Hamano.
git:
PACKAGE NAME: gkrellm-2.3.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 753 K
PACKAGE SIZE (uncompressed): 1850 K
PACKAGE DESCRIPTION:
gkrellm: gkrellm (GNU Krell Monitors)
gkrellm:
gkrellm: GKrellM charts SMP CPU, load, Disk, and all active net interfaces
gkrellm: automatically. An on/off button and online timer for the PPP interface
gkrellm: is provided. Monitors for memory and swap usage, file system, internet
gkrellm: connections, APM laptop battery, mbox style mailboxes, and cpu temps.
gkrellm: Also includes an uptime monitor, hostname label, and clock/calendar.
gkrellm:
gkrellm: Bill Wilson is the author of GKrellM.
gkrellm:
PACKAGE NAME: glib-1.2.10-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 199 K
PACKAGE SIZE (uncompressed): 580 K
PACKAGE DESCRIPTION:
glib: glib (library of C routines, version 1.x)
glib:
glib: GLib is a library which includes support routines for C such as lists,
glib: trees, hashes, memory allocation, and many other things.
glib:
glib: GLib is required by nearly everything that uses GTK+ version 1.x.
glib:
PACKAGE NAME: glib2-2.14.6-i486-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1714 K
PACKAGE SIZE (uncompressed): 10090 K
PACKAGE DESCRIPTION:
glib2: glib2 (library of C routines)
glib2:
glib2: GLib is a library which includes support routines for C such as lists,
glib2: trees, hashes, memory allocation, and many other things.
glib2:
PACKAGE NAME: glibc-2.7-i486-10.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 29023 K
PACKAGE SIZE (uncompressed): 111430 K
PACKAGE DESCRIPTION:
glibc: glibc (GNU C libraries)
glibc:
glibc: This package contains the GNU C libraries and header files. The GNU
glibc: C library was written originally by Roland McGrath, and is currently
glibc: maintained by Ulrich Drepper. Some parts of the library were
glibc: contributed or worked on by other people.
glibc:
glibc: You'll need this package to compile programs.
glibc:
PACKAGE NAME: glibc-i18n-2.7-noarch-10.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 21191 K
PACKAGE SIZE (uncompressed): 89490 K
PACKAGE DESCRIPTION:
glibc-i18n: glibc-i18n (locale files from glibc)
glibc-i18n:
glibc-i18n: These files go in /usr/lib/locale and /usr/share/i18n/ to provide
glibc-i18n: internationalization support. You'll need this package unless you
glibc-i18n: will be using US English only.
glibc-i18n:
PACKAGE NAME: glibc-profile-2.7-i486-10.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1103 K
PACKAGE SIZE (uncompressed): 4150 K
PACKAGE DESCRIPTION:
glibc-profile: glibc-profile (GNU C libraries with profiling support)
glibc-profile:
glibc-profile: This package contains static versions of the GNU C libraries with
glibc-profile: support for profiling binaries using gprof. gprof calculates how
glibc-profile: much time a program spends in each routine which can suggest where
glibc-profile: to concentrate efforts to improve performance.
glibc-profile:
glibc-profile: See the gprof man page for more details.
glibc-profile:
PACKAGE NAME: glibc-solibs-2.7-i486-10.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 4076 K
PACKAGE SIZE (uncompressed): 9730 K
PACKAGE DESCRIPTION:
glibc-solibs: glibc-solibs (shared GNU C libraries)
glibc-solibs:
glibc-solibs: This package contains the shared libraries, binaries, and support
glibc-solibs: files required to run most Linux applications linked with glibc.
glibc-solibs:
PACKAGE NAME: glibc-zoneinfo-2.7-noarch-10.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 587 K
PACKAGE SIZE (uncompressed): 3040 K
PACKAGE DESCRIPTION:
glibc-zoneinfo: glibc-zoneinfo (timezone database)
glibc-zoneinfo:
glibc-zoneinfo: This package allows you to configure your time zone.
glibc-zoneinfo:
glibc-zoneinfo: This timezone database comes from the tzdata and tzcode packages by
glibc-zoneinfo: Arthur David Olson et.al. The latest version and more information
glibc-zoneinfo: may be found at
ftp://elsie.nci.nih.gov/pub/
glibc-zoneinfo:
glibc-zoneinfo: Use the timeconfig utility to set your local time zone.
glibc-zoneinfo:
PACKAGE NAME: glproto-1.4.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
glproto: glproto
glproto:
glproto: glproto is part of X11.
glproto:
glproto: For more information about the X.Org Foundation (the providers of the
glproto: X.Org implementation of the X Window System), see their website:
glproto:
glproto:
http://www.x.org
glproto:
PACKAGE NAME: gmime-2.2.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 433 K
PACKAGE SIZE (uncompressed): 2210 K
PACKAGE DESCRIPTION:
gmime: gmime (MIME parsing library)
gmime:
gmime: GMime is a set of utilities for parsing and creating messages using
gmime: the Multipurpose Internet Mail Extension (MIME) as defined by many
gmime: Internet RFCs.
gmime:
gmime: Jeffrey Stedfast is the author of GMime.
gmime:
PACKAGE NAME: gmp-4.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 540 K
PACKAGE SIZE (uncompressed): 1410 K
PACKAGE DESCRIPTION:
gmp: gmp (GNU multiple precision arithmetic library)
gmp:
gmp: GNU MP is a library for arbitrary precision arithmetic, operating on
gmp: signed integers, rational numbers, and floating point numbers. It has
gmp: a rich set of functions, and the functions have a regular interface.
gmp:
PACKAGE NAME: gnome-icon-theme-2.22.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 3698 K
PACKAGE SIZE (uncompressed): 13690 K
PACKAGE DESCRIPTION:
gnome-icon-theme: gnome-icon-theme (default icons used by GTK+)
gnome-icon-theme:
gnome-icon-theme: A set of default icons used by many GTK+ applications.
gnome-icon-theme:
PACKAGE NAME: gnuchess-5.07-i486-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1003 K
PACKAGE SIZE (uncompressed): 2810 K
PACKAGE DESCRIPTION:
gnuchess: gnuchess (GPL licensed chess engines and graphical frontends)
gnuchess:
gnuchess: This is a package of programs for playing chess. It includes the
gnuchess: gnuchess and Sjeng chess engines, and the eboard and XBoard
gnuchess: graphical interfaces to these engines.
gnuchess:
PACKAGE NAME: gnupg-1.4.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1814 K
PACKAGE SIZE (uncompressed): 4670 K
PACKAGE DESCRIPTION:
gnupg: gnupg (The GNU Privacy Guard)
gnupg:
gnupg: GnuPG is GNU's tool for secure communication and data storage. It can
gnupg: be used to encrypt data and to create digital signatures. It includes
gnupg: an advanced key management facility and is compliant with the proposed
gnupg: OpenPGP Internet standard as described in RFC2440.
gnupg:
PACKAGE NAME: gnupg2-2.0.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 2566 K
PACKAGE SIZE (uncompressed): 6790 K
PACKAGE DESCRIPTION:
gnupg2: GnuPG2 (The GNU Privacy Guard version 2.x)
gnupg2:
gnupg2: GnuPG is GNU's tool for secure communication and data storage. It can
gnupg2: be used to encrypt data and to create digital signatures. It includes
gnupg2: an advanced key management facility and is compliant with the proposed
gnupg2: OpenPGP Internet standard as described in RFC2440 and the S/MIME
gnupg2: standard as described by several RFCs.
gnupg2:
gnupg2: GnuPG 2.0 is the stable version of GnuPG integrating support for
gnupg2: OpenPGP and S/MIME. It does not conflict with an installed 1.4.x
gnupg2: OpenPGP-only version.
PACKAGE NAME: gnuplot-4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1132 K
PACKAGE SIZE (uncompressed): 3080 K
PACKAGE DESCRIPTION:
gnuplot: gnuplot (plotting utility)
gnuplot:
gnuplot: Gnuplot is a command-line driven interactive function plotting utility
gnuplot: for UNIX, MSDOS, and VMS platforms. The software is copyrighted but
gnuplot: freely distributed (i.e., you don't have to pay for it). It was
gnuplot: originally intended as graphical program which would allow scientists
gnuplot: and students to visualize mathematical functions and data. Gnuplot
gnuplot: supports many different types of terminals, plotters, and printers
gnuplot: (including many color devices, and pseudo-devices like LaTeX) and is
gnuplot: easily extensible to include new devices.
gnuplot:
PACKAGE NAME: gnutls-2.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1533 K
PACKAGE SIZE (uncompressed): 3130 K
PACKAGE DESCRIPTION:
gnutls: gnutls (GNU TLS library)
gnutls:
gnutls: This is a TLS (Transport Layer Security) 1.0 and SSL (Secure Sockets
gnutls: Layer) 3.0 implementation. In brief, GnuTLS can be described as a
gnutls: library which offers an API to access secure communication protocols.
gnutls: These protocols provide privacy over insecure lines, and were designed
gnutls: to prevent eavesdropping, tampering, or message forgery.
gnutls:
gnutls: Homepage:
http://www.gnu.org/software/gnutls/
gnutls:
PACKAGE NAME: gpa-0.7.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 255 K
PACKAGE SIZE (uncompressed): 870 K
PACKAGE DESCRIPTION:
gpa: gpa (GNU Privacy Assistant)
gpa:
gpa: GPA is a graphical frontend for the GNU Privacy Guard (GnuPG,
gpa:
http://www.gnupg.org). GPA can be used to encrypt, decrypt, and
gpa: sign files, to verify signatures and to manage the private and
gpa: public keys.
gpa:
PACKAGE NAME: gperf-3.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 92 K
PACKAGE SIZE (uncompressed): 230 K
PACKAGE DESCRIPTION:
gperf: gperf (a perfect hash function generator)
gperf:
gperf: gperf is a perfect hash function generator written in C++.
gperf: It transforms an n element user-specified keyword set W into a
gperf: perfect hash function F. gperf currently generates the reserved
gperf: keyword recognizer for lexical analyzers in several production and
gperf: research compilers and language processing tools, including GNU C,
gperf: GNU C++, GNU Java, GNU Pascal, GNU Modula 3, and GNU indent.
gperf:
gperf: gperf was written by by Douglas C. Schmidt and Bruno Haible.
gperf:
PACKAGE NAME: gpgme-1.1.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 342 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
gpgme: gpgme (GnuPG Made Easy)
gpgme:
gpgme: GPGME (GnuPG Made Easy) is a C language library that allows to add
gpgme: support for cryptography to a program. It is designed to make access
gpgme: to public key crypto engines like GnuPG or GpgSM easier for
gpgme: applications. GPGME provides a high-level crypto API for encryption,
gpgme: decryption, signing, signature verification and key management.
gpgme:
gpgme: GPGME uses GnuPG and GpgSM as its backends to support OpenPGP and the
gpgme: Cryptographic Message Syntax (CMS).
gpgme:
PACKAGE NAME: gpm-1.20.1-i486-5.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 233 K
PACKAGE SIZE (uncompressed): 540 K
PACKAGE DESCRIPTION:
gpm: gpm (general purpose mouse server)
gpm:
gpm: The general purpose mouse server, or gpm, allows you to use the mouse
gpm: to cut and paste text from the screen. It also acts as a mouse
gpm: server for applications running on the Linux console, such as the
gpm: Midnight Commander file manager.
gpm:
gpm: NOTE: This program may cause problems when you start X on systems
gpm: that do not use a serial mouse. If you get an 'unable to open mouse
gpm: device' error from X, disable /etc/rc.d/rc.gpm.
gpm:
PACKAGE NAME: gqview-2.1.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 922 K
PACKAGE SIZE (uncompressed): 2610 K
PACKAGE DESCRIPTION:
gqview: gqview (GQview Image Browser)
gqview:
gqview: GQview is an image browser that features single-click access to view
gqview: images and move around the directory tree.
gqview:
gqview: Homepage:
http://gqview.sourceforge.net/
gqview:
PACKAGE NAME: grep-2.5-i486-3.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 191 K
PACKAGE SIZE (uncompressed): 550 K
PACKAGE DESCRIPTION:
grep: grep (print lines matching a pattern)
grep:
grep: This is GNU grep, the "fastest grep in the west" (we hope). Grep
grep: searches through textual input for lines which contain a match to a
grep: specified pattern and then prints the matching lines.
grep:
PACKAGE NAME: groff-1.19.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 2215 K
PACKAGE SIZE (uncompressed): 6940 K
PACKAGE DESCRIPTION:
groff: groff (document formatting system)
groff:
groff: The GNU groff package provides versions of troff, nroff, eqn, tbl, and
groff: other Unix text-formatting utilities. Groff is used to 'compile' man
groff: pages stored in groff/nroff format into a form which can be printed or
groff: displayed on the screen. These man pages are stored in compressed
groff: form in the /usr/man/man? directories.
groff:
PACKAGE NAME: gtk+-1.2.10-i486-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1684 K
PACKAGE SIZE (uncompressed): 4870 K
PACKAGE DESCRIPTION:
gtk+: gtk+ (graphical user interface toolkit, version 1.x)
gtk+:
gtk+: GTK+, which stands for the Gimp ToolKit, is a library for creating
gtk+: graphical user interfaces for the X Window System.
gtk+:
gtk+: This library has been largely replaced by GTK+ version 2, but there
gtk+: are still some good programs that require it.
gtk+:
PACKAGE NAME: gtk+2-2.12.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 9856 K
PACKAGE SIZE (uncompressed): 39980 K
PACKAGE DESCRIPTION:
gtk+2: GTK+ version 2 (multi-platform GUI toolkit)
gtk+2:
gtk+2: This is GTK+, a multi-platform toolkit for creating graphical user
gtk+2: interfaces. Offering a complete set of widgets, GTK+ is suitable for
gtk+2: projects ranging from small one-off projects to complete application
gtk+2: suites.
gtk+2:
PACKAGE NAME: gucharmap-1.10.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1519 K
PACKAGE SIZE (uncompressed): 4860 K
PACKAGE DESCRIPTION:
gucharmap: gucharmap (character map utility)
gucharmap:
gucharmap: gucharmap is a Unicode character map and font viewer.
gucharmap:
PACKAGE NAME: guile-1.8.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 1820 K
PACKAGE SIZE (uncompressed): 5150 K
PACKAGE DESCRIPTION:
guile: guile (GNU's extension language library)
guile:
guile: This is Guile, Project GNU's extension language library. Guile is an
guile: interpreter for Scheme, packaged as a library that you can link into
guile: your applications to give them their own scripting language. Guile
guile: will eventually support other languages as well, giving users of
guile: Guile-based applications a choice of languages.
guile:
PACKAGE NAME: gutenprint-5.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 2708 K
PACKAGE SIZE (uncompressed): 5600 K
PACKAGE DESCRIPTION:
gutenprint: gutenprint (IJS printer driver for Ghostscript and CUPS)
gutenprint:
gutenprint: Gutenprint (formerly named Gimp-Print) is a suite of printer drivers
gutenprint: that may be used with most common print spooling systems, including
gutenprint: CUPS, LPRng, or others. These drivers provide high quality printing
gutenprint: in many cases equal to or better than proprietary vendor-supplied
gutenprint: drivers. Gutenprint also includes an enhanced print plug-in for the
gutenprint: GIMP image editor.
gutenprint:
PACKAGE NAME: gv-3.6.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 162 K
PACKAGE SIZE (uncompressed): 400 K
PACKAGE DESCRIPTION:
gv: gv (PS/PDF file viewer)
gv:
gv: gv is a PostScript and PDF previewer. It allows users to view and
gv: navigate through PostScript and PDF documents on an X display by
gv: providing a user interface for the ghostscript interpreter.
gv:
gv: gv was written by Johannes Plass, using the source code for Tim
gv: Theisen's ghostview 1.5 as a starting point.
gv:
PACKAGE NAME: gxine-0.5.11-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 451 K
PACKAGE SIZE (uncompressed): 1050 K
PACKAGE DESCRIPTION:
gxine: gxine (GTK+ media player based on Xine)
gxine:
gxine: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs,
gxine: multimedia files, and multimedia streamed over a network.
gxine:
gxine: The gxine package contains a GTK+ graphical user interface for the
gxine: Xine multimedia player.
gxine:
PACKAGE NAME: gzip-1.3.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 90 K
PACKAGE SIZE (uncompressed): 210 K
PACKAGE DESCRIPTION:
gzip: gzip (file compression utility)
gzip:
gzip: Gzip reduces the size of the named files using Lempel-Ziv coding
gzip: (LZ77). Whenever possible, each file is replaced by one with the
gzip: extension .gz, while keeping the same ownership modes, access and
gzip: modification times.
gzip:
PACKAGE NAME: hal-0.5.10-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 638 K
PACKAGE SIZE (uncompressed): 2160 K
PACKAGE DESCRIPTION:
hal: hal (The HAL Hardware Abstraction Layer)
hal:
hal: HAL is a piece of software that provides a view of the various
hal: hardware attached to a system. HAL keeps detailed metadata for each
hal: piece of hardware and provides hooks so that system and desktop
hal: software can react to changes in the hardware configuration (such as
hal: the insertion of a DVD, or a USB flash memory stick). Users in the
hal: "plugdev" or "cdrom" group will be able to use such devices on the
hal: desktop without the need to mount/umount them manually.
hal:
hal: For more info, see:
http://www.freedesktop.org/Software/hal
PACKAGE NAME: hal-info-20080317-noarch-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 38 K
PACKAGE SIZE (uncompressed): 340 K
PACKAGE DESCRIPTION:
hal-info: hal-info (device information for HAL)
hal-info:
hal-info: The hal-info package contains device information for HAL, a Hardware
hal-info: Abstraction Layer.
hal-info:
hal-info: For more info, see:
http://www.freedesktop.org/Software/hal
hal-info:
PACKAGE NAME: hdparm-8.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 52 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
hdparm: hdparm (read/set hard drive parameters)
hdparm:
hdparm: hdparm provides a command line interface to various hard disk ioctls
hdparm: supported by the Linux ATA/IDE device driver subsystem. This may be
hdparm: required to enable higher-performing disk modes.
hdparm:
hdparm: hdparm was written by Mark Lord.
hdparm:
PACKAGE NAME: hfsutils-3.2.6-i486-3.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 211 K
PACKAGE SIZE (uncompressed): 510 K
PACKAGE DESCRIPTION:
hfsutils: hfsutils
hfsutils:
hfsutils: hfsutils is a collection of tools for reading and writing Macintosh
hfsutils: HFS volumes. These utilities can manipulate HFS volumes on nearly any
hfsutils: medium. Since hfs and xhfs are linked with Tcl/Tk shared libraries,
hfsutils: the hfsutils package is included here in the TCL software series.
hfsutils:
hfsutils: hfsutils was written by Robert Leslie <
[email protected]>
hfsutils:
PACKAGE NAME: hicolor-icon-theme-0.10-noarch-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 210 K
PACKAGE DESCRIPTION:
hicolor-icon-theme: hicolor-icon-theme (default icon theme)
hicolor-icon-theme:
hicolor-icon-theme: This is the default fallback theme used by implementations of the icon
hicolor-icon-theme: theme specification.
hicolor-icon-theme:
hicolor-icon-theme: The specification is available at:
hicolor-icon-theme:
http://www.freedesktop.org/standards/icon-theme-spec/
hicolor-icon-theme:
PACKAGE NAME: hplip-2.8.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 13556 K
PACKAGE SIZE (uncompressed): 20770 K
PACKAGE DESCRIPTION:
hplip: hplip (HP print/scan/fax support)
hplip:
hplip: HPLIP is an HP developed solution for printing, scanning, and faxing
hplip: with HP inkjet and laser based printers in Linux. The HPLIP project
hplip: provides printing support for more than 1000 HP printer models,
hplip: including Deskjet, Officejet, Photosmart, PSC (Print Scan Copy),
hplip: Business Inkjet, LaserJet, and LaserJet MFP.
hplip:
hplip: For more information, see:
http://hplip.sf.net
hplip:
PACKAGE NAME: htdig-3.2.0b6-i486-3.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1111 K
PACKAGE SIZE (uncompressed): 3320 K
PACKAGE DESCRIPTION:
htdig: htdig (web indexing and searching system)
htdig:
htdig: The ht://Dig system is a complete web indexing and searching system
htdig: for a small domain or intranet. This system is not indended to
htdig: replace the need for outside Internet search engines such as Google,
htdig: but rather to cover the search needs for a single company, campus, or
htdig: even a particular sub section of a web site.
htdig:
PACKAGE NAME: httpd-2.2.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1876 K
PACKAGE SIZE (uncompressed): 7120 K
PACKAGE DESCRIPTION:
httpd: httpd (The Apache HTTP Server)
httpd:
httpd: Apache is an HTTP server designed as a plug-in replacement for the
httpd: NCSA HTTP server. It fixes numerous bugs in the NCSA server and
httpd: includes many frequently requested new features, and has an API which
httpd: allows it to be extended to meet users' needs more easily.
httpd:
httpd: Apache is the most popular web server in the known universe; over
httpd: half of the servers on the Internet are running Apache or one of
httpd: its variants.
httpd:
PACKAGE NAME: iceauth-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
iceauth: iceauth
iceauth:
iceauth: iceauth is part of X11.
iceauth:
iceauth: For more information about the X.Org Foundation (the providers of the
iceauth: X.Org implementation of the X Window System), see their website:
iceauth:
iceauth:
http://www.x.org
iceauth:
PACKAGE NAME: icmpinfo-1.11-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
icmpinfo: icmpinfo (ICMP monitoring utility)
icmpinfo:
icmpinfo: Icmpinfo is a tool for looking at the ICMP messages received on the
icmpinfo: running host. It can be used to detect and record attack attempts, as
icmpinfo: well as help diagnose network problems.
icmpinfo:
icmpinfo: icmpinfo was written by Laurent Demailly.
icmpinfo:
PACKAGE NAME: ico-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
ico: ico
ico:
ico: ico is part of X11.
ico:
ico: For more information about the X.Org Foundation (the providers of the
ico: X.Org implementation of the X Window System), see their website:
ico:
ico:
http://www.x.org
ico:
PACKAGE NAME: icon-naming-utils-0.8.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 22 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
icon-naming-utils: icon-naming-utils (generate icon files for your DE)
icon-naming-utils:
icon-naming-utils: It is a script for maintaining backwards compatibility
icon-naming-utils: with current desktop icon themes, while migrating to
icon-naming-utils: the names specified in the Icon Naming Specification.
icon-naming-utils:
icon-naming-utils: Homepage:
http://tango.freedesktop.org
icon-naming-utils:
PACKAGE NAME: imagemagick-6.3.7_10-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 4185 K
PACKAGE SIZE (uncompressed): 14630 K
PACKAGE DESCRIPTION:
imagemagick: imagemagick (a robust collection of image processing tools)
imagemagick:
imagemagick: ImageMagick is a collection of tools for manipulating and displaying
imagemagick: digital images. It can merge images, transform image dimensions,
imagemagick: do screen captures, create animation sequences, and convert between
imagemagick: many different image formats.
imagemagick:
imagemagick: ImageMagick was written by John Cristy of ImageMagick Studio.
imagemagick:
imagemagick: Home page:
http://www.imagemagick.org/
imagemagick:
PACKAGE NAME: imake-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 27 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
imake: imake
imake:
imake: imake is part of X11.
imake:
imake: For more information about the X.Org Foundation (the providers of the
imake: X.Org implementation of the X Window System), see their website:
imake:
imake:
http://www.x.org
imake:
PACKAGE NAME: imapd-4.64-i486-3.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 771 K
PACKAGE SIZE (uncompressed): 1420 K
PACKAGE DESCRIPTION:
imapd: imapd (IMAP4rev1 from pine4.64)
imapd:
imapd: /usr/sbin/ipop3d and /usr/sbin/imapd are servers supporting the POP3
imapd: and IMAP remote mail access protocols. They allow users to download
imapd: mail from your Linux system for remote viewing.
imapd:
PACKAGE NAME: imlib-1.9.15-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 641 K
PACKAGE SIZE (uncompressed): 1410 K
PACKAGE DESCRIPTION:
imlib: imlib (image loading and rendering library)
imlib:
imlib: Imlib is a display depth-independent image loading and rendering
imlib: library. Imlib is designed to simplify and speed up the process of
imlib: loading images and obtaining X Window System drawables. Imlib
imlib: provides many simple manipulation routines which can be used for
imlib: common operations.
imlib:
PACKAGE NAME: indent-2.2.9-i386-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 104 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
indent: indent (changes the appearance of a C program)
indent:
indent: GNU indent changes the appearance of a C program by inserting or
indent: deleting whitespace according to a plethora of options. Some canned
indent: styles of formatting (like the GNU style, Kernighan & Ritchie style,
indent: and original Berkeley style) are supported as well.
indent:
indent: GNU indent is a descendant of BSD indent.
indent:
PACKAGE NAME: inetd-1.79s-i486-8.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
inetd: inetd (Internet super-server)
inetd:
inetd: This is a program to listen for connections on certain Internet
inetd: sockets and invokes a program to service the request. Essentially,
inetd: inetd allows running one daemon to invoke several others, reducing
inetd: load on the system. Many of the network services are run through
inetd: inetd, so you'll probably need it.
inetd:
inetd: This version of inetd was ported from OpenBSD.
inetd:
PACKAGE NAME: infozip-5.52-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 280 K
PACKAGE SIZE (uncompressed): 660 K
PACKAGE DESCRIPTION:
infozip: infozip (Info-ZIP's zip and unzip utilities)
infozip:
infozip: zip is a compression and file packaging utility for Unix, VMS, MSDOS,
infozip: OS/2, Windows NT, Minix, Atari and Macintosh, Amiga and Acorn RISC OS.
infozip: It is analogous to a combination of the UNIX commands tar(1) and
infozip: compress(1) and is compatible with PKZIP (Phil Katz's ZIP). A
infozip: companion program (unzip(1L)), unpacks zip archives.
infozip:
PACKAGE NAME: inotify-tools-3.13-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 47 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
inotify-tools: inotify-tools (command line utilities for inotify)
inotify-tools:
inotify-tools: inotify-tools is a set of command-line programs for Linux providing a
inotify-tools: simple interface to inotify. These programs can be used to monitor
inotify-tools: and act upon filesystem events.
inotify-tools:
inotify-tools: For more information see the inotifywait and inotifywatch man pages.
inotify-tools:
inotify-tools: inotify-tools home:
http://inotify-tools.sourceforge.net/
inotify-tools:
PACKAGE NAME: inputproto-1.4.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
inputproto: inputproto
inputproto:
inputproto: inputproto is part of X11.
inputproto:
inputproto: For more information about the X.Org Foundation (the providers of the
inputproto: X.Org implementation of the X Window System), see their website:
inputproto:
inputproto:
http://www.x.org
inputproto:
PACKAGE NAME: iproute2-2.6.16_060323-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 389 K
PACKAGE SIZE (uncompressed): 980 K
PACKAGE DESCRIPTION:
iproute2: iproute2 (IP routing utilities)
iproute2:
iproute2: These are tools used to administer many advanced IP routing features
iproute2: in the kernel. See Configure.help in the kernel documentation
iproute2: (search for iproute2) for more information on which kernel options
iproute2: these tools are used with.
iproute2:
iproute2: These utilities were written by Alexey Kuznetsov. The current
iproute2: maintainer of iproute2 is Stephen Hemminger.
iproute2:
PACKAGE NAME: iptables-1.4.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 349 K
PACKAGE SIZE (uncompressed): 920 K
PACKAGE DESCRIPTION:
iptables: iptables (IP packet filter administration)
iptables:
iptables: iptables is a packet filter administration tool.
iptables:
iptables: Iptables can be used to build internet firewalls based on stateless
iptables: and stateful packet filtering, use NAT and masquerading for sharing
iptables: internet access if you don't have enough public IP addresses, use NAT
iptables: to implement transparent proxies, aid the tc and iproute2 systems
iptables: used to build sophisticated QoS and policy routers, do further packet
iptables: manipulation (mangling) like altering the TOS/DSCP/ECN bits of the IP
iptables: header, and much more. See:
http://www.netfilter.org
PACKAGE NAME: iptraf-3.0.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 311 K
PACKAGE SIZE (uncompressed): 760 K
PACKAGE DESCRIPTION:
iptraf: iptraf (console-based network monitoring program)
iptraf:
iptraf: IPTraf is a console-based network monitoring program for Linux that
iptraf: displays information about IP traffic such as:
iptraf:
iptraf: Current TCP connections, types of IP packets, packet and byte
iptraf: counts, TCP/UDP counts by ports, packet counts by packet sizes,
iptraf: packet and byte counts by IP address, interface activity, flag
iptraf: statuses on TCP packets, and other LAN station statistics.
iptraf:
iptraf: iptraf was written by Gerard Paul Java.
PACKAGE NAME: iputils-s20070202-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 75 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
iputils: iputils (a collection of common network tools)
iputils:
iputils: The iputils package contains network tools found on nearly all *NIX
iputils: systems, along with an extra or two. Some of the utilities found
iputils: here include arping, clockdiff, ping, ping6, rarpd, rdisc, tracepath,
iputils: tracepath6, and traceroute6.
iputils:
iputils: iputils is maintained by YOSHIFUJI Hideaki.
iputils:
PACKAGE NAME: ipw2100-fw-1.3-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 247 K
PACKAGE SIZE (uncompressed): 630 K
PACKAGE DESCRIPTION:
ipw2100-fw: ipw2100-fw (Intel ipw2100 wireless firmware)
ipw2100-fw:
ipw2100-fw: This firmware is used by the ipw2100 kernel module for the Intel
ipw2100-fw: PRO/Wireless 2100 Network Connection mini PCI adapter.
ipw2100-fw: Your use of this firmware is governed by this Intel license:
ipw2100-fw: /usr/doc/ipw2100-fw-1.3/LICENSE
ipw2100-fw:
ipw2100-fw: Visit Intel's Linux wireless website at this address:
ipw2100-fw:
http://intellinuxwireless.org/
ipw2100-fw:
PACKAGE NAME: ipw2200-fw-3.0-fw-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 264 K
PACKAGE SIZE (uncompressed): 590 K
PACKAGE DESCRIPTION:
ipw2200-fw: ipw2200-fw (Intel ipw2200 wireless firmware)
ipw2200-fw:
ipw2200-fw: This firmware is used by the ipw2200 kernel module for the Intel
ipw2200-fw: PRO/Wireless 2915ABG Network Connection and Intel PRO/Wireless 2200BG
ipw2200-fw: Network Connection mini PCI adapters.
ipw2200-fw: Your use of this firmware is governed by this Intel license:
ipw2200-fw: /usr/doc/ipw2200-fw-3.0/LICENSE
ipw2200-fw:
ipw2200-fw: Visit Intel's Linux wireless website at this address:
ipw2200-fw:
http://intellinuxwireless.org/
ipw2200-fw:
PACKAGE NAME: irssi-0.8.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1150 K
PACKAGE SIZE (uncompressed): 3130 K
PACKAGE DESCRIPTION:
irssi: irssi (Internet Relay Chat client)
irssi:
irssi: Irssi is an Internet Relay Chat client. Designed to be both secure
irssi: and expandable, irssi is easily customized using modules and scripts.
irssi:
irssi: For more information, visit:
http://irssi.org
irssi:
irssi: irssi was written by Timo Sirainen.
irssi:
PACKAGE NAME: isapnptools-1.26-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 109 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
isapnptools: isapnptools (ISA Plug-And-Play tools)
isapnptools:
isapnptools: These programs allow ISA Plug-And-Play devices to be configured
isapnptools: on a Linux machine.
isapnptools:
PACKAGE NAME: ispell-3.2.06-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 406 K
PACKAGE SIZE (uncompressed): 1140 K
PACKAGE DESCRIPTION:
ispell: ispell (spelling checker)
ispell:
ispell: Ispell is a fast screen-oriented spelling checker that shows you your
ispell: errors in the context of the original file, and suggests possible
ispell: corrections when it can figure them out. Compared to UNIX spell, it
ispell: is faster and much easier to use. Ispell can also handle languages
ispell: other than English. Ispell has a long history, and many people have
ispell: contributed to the current version -- some of the major contributors
ispell: include R. E. Gorin, Pace Willisson, Walt Buehring, and Geoff
ispell: Kuenning.
ispell:
PACKAGE NAME: iwlwifi-3945-ucode-2.14.1.5-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 64 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
iwlwifi-3945-ucode: iwlwifi-3945-ucode (Intel 3945 wireless microcode)
iwlwifi-3945-ucode:
iwlwifi-3945-ucode: The file iwlwifi-3945-1.ucode provided in this package is required to
iwlwifi-3945-ucode: be present on your system in order for the Intel PRO/Wireless
iwlwifi-3945-ucode: 3945ABG/BG Network Connection Adapter driver for Linux (iwlwifi-3945)
iwlwifi-3945-ucode: to be able to operate on your system.
iwlwifi-3945-ucode:
iwlwifi-3945-ucode: Visit Intel's Linux wireless website at this address:
iwlwifi-3945-ucode:
http://intellinuxwireless.org/
iwlwifi-3945-ucode:
PACKAGE NAME: iwlwifi-4965-ucode-4.44.1.20-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 78 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
iwlwifi-4965-ucode: iwlwifi-4965-ucode (Intel 4965 wireless microcode)
iwlwifi-4965-ucode:
iwlwifi-4965-ucode: The file iwlwifi-4965-1.ucode provided in this package is required to
iwlwifi-4965-ucode: be present on your system in order for the Intel PRO/Wireless
iwlwifi-4965-ucode: 4965ABG/BG Network Connection Adapter driver for Linux (iwlwifi-4965)
iwlwifi-4965-ucode: to be able to operate on your system.
iwlwifi-4965-ucode:
iwlwifi-4965-ucode: Visit Intel's Linux wireless website at this address:
iwlwifi-4965-ucode:
http://intellinuxwireless.org/
iwlwifi-4965-ucode:
PACKAGE NAME: jed-0.99_18-i486-3.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 604 K
PACKAGE SIZE (uncompressed): 2040 K
PACKAGE DESCRIPTION:
jed: jed (programmer's editor)
jed:
jed: JED (by John E. Davis) is an extremely powerful but small emacs-like
jed: programmer's editor that is extensible in a C-like macro language and
jed: can do color syntax highlighting. Among the many features:
jed: Emacs, wordstar, EDT emulation;
jed: C, Fortran, TeX, text editing modes; Full undo;
jed: GNU Emacs compatible info reader, and lots more.
jed:
jed: JED is also 8 bit clean, so you can even edit binary files!
jed:
PACKAGE NAME: jfsutils-1.1.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 275 K
PACKAGE SIZE (uncompressed): 1090 K
PACKAGE DESCRIPTION:
jfsutils: jfsutils (IBM JFS utilities)
jfsutils:
jfsutils: Utilities for managing IBM's Journaled File System (JFS) under Linux:
jfsutils: jfs_debugfs - shell-type JFS file system editor.
jfsutils: jfs_fsck - check and repair a JFS formatted device.
jfsutils: jfs_fscklog - extract a JFS fsck service log into a file.
jfsutils: jfs_logdump - dump a JFS formatted device's journal log.
jfsutils: jfs_mkfs - create a JFS formatted partition.
jfsutils: jfs_tune - adjust tunable file system parameters on JFS.
jfsutils:
PACKAGE NAME: joe-3.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 338 K
PACKAGE SIZE (uncompressed): 1010 K
PACKAGE DESCRIPTION:
joe: joe (Joe text editor)
joe:
joe: Joseph H. Allen's easy to use text editor, similar to WordStar[tm].
joe:
PACKAGE NAME: jove-4.16.0.61-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 159 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
jove: jove (Jonathan's Own Version of Emacs)
jove:
jove: A mostly Emacs compatible text editor, with man pages and the
jove: 'teachjove' tutorial program. If you'd rather have the real thing,
jove: the actual Emacs editor/environment is available in series 'E'.
jove:
jove: JOVE was written by Jonathan Payne.
jove:
PACKAGE NAME: jre-6u6-i586-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 34101 K
PACKAGE SIZE (uncompressed): 99800 K
PACKAGE DESCRIPTION:
jre: Java(TM) 2 Platform Standard Edition Runtime Environment,
jre: Version 6.0 update 6.
jre:
jre: The J2SE(TM) Runtime Environment (JRE) is intended for software
jre: developers and vendors to redistribute with their applications.
jre: It contains the Java virtual machine, runtime class libraries, and
jre: Java application launcher that are necessary to run programs written
jre: in the Java programming language.
jre:
jre: If you need development tools, obtain the jdk from /extra, or see the
jre: Sun Microsystems web page:
http://java.sun.com/
PACKAGE NAME: k3b-1.0.4-i486-3.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 6094 K
PACKAGE SIZE (uncompressed): 12270 K
PACKAGE DESCRIPTION:
k3b: k3b (The CD Creator)
k3b:
k3b: K3b makes writing cds under Linux easy. It has an easy to use
k3b: interface and supports CD burning (including on-the-fly), copying,
k3b: erasing, ripping, and more.
k3b:
k3b: K3b was written by Sebastian Trueg, Thomas Froescher,
k3b: Christian Kvasny, and Klaus-Dieter Krannich.
k3b:
k3b: For more information, visit:
http://www.k3b.org
k3b:
PACKAGE NAME: k3b-i18n-1.0.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 7365 K
PACKAGE SIZE (uncompressed): 16410 K
PACKAGE DESCRIPTION:
k3b-i18n: k3b-i18n (internationalization files for the CD Creator)
k3b-i18n:
k3b-i18n:
PACKAGE NAME: kbd-1.12-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 1103 K
PACKAGE SIZE (uncompressed): 2840 K
PACKAGE DESCRIPTION:
kbd: kbd (keyboard maps and console fonts)
kbd:
kbd: Load and save keyboard mappings. Needed if you are not using the US
kbd: keyboard map. This package also contains utilities to change your
kbd: console fonts - if you install it you'll get a menu later on that lets
kbd: you select from many different fonts. If you like one, you can make
kbd: it your default font. A new default font can be chosen at any time by
kbd: typing 'setconsolefont'.
kbd:
PACKAGE NAME: kbproto-1.0.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 23 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
kbproto: kbproto
kbproto:
kbproto: kbproto is part of X11.
kbproto:
kbproto: For more information about the X.Org Foundation (the providers of the
kbproto: X.Org implementation of the X Window System), see their website:
kbproto:
kbproto:
http://www.x.org
kbproto:
PACKAGE NAME: kde-i18n-af-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1060 K
PACKAGE SIZE (uncompressed): 3140 K
PACKAGE DESCRIPTION:
kde-i18n-af: kde-i18n-af
kde-i18n-af:
kde-i18n-af: Afrikaans language support for KDE.
kde-i18n-af:
PACKAGE NAME: kde-i18n-ar-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1573 K
PACKAGE SIZE (uncompressed): 5090 K
PACKAGE DESCRIPTION:
kde-i18n-ar: kde-i18n-ar
kde-i18n-ar:
kde-i18n-ar: Arabic language support for KDE.
kde-i18n-ar:
PACKAGE NAME: kde-i18n-az-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 495 K
PACKAGE SIZE (uncompressed): 1650 K
PACKAGE DESCRIPTION:
kde-i18n-az: kde-i18n-az
kde-i18n-az:
kde-i18n-az: Azerbaijani language support for KDE.
kde-i18n-az:
PACKAGE NAME: kde-i18n-be-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 786 K
PACKAGE SIZE (uncompressed): 2650 K
PACKAGE DESCRIPTION:
kde-i18n-be: kde-i18n-be
kde-i18n-be:
kde-i18n-be: Belarusian language support for KDE.
kde-i18n-be:
PACKAGE NAME: kde-i18n-bg-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2676 K
PACKAGE SIZE (uncompressed): 9320 K
PACKAGE DESCRIPTION:
kde-i18n-bg: kde-i18n-bg
kde-i18n-bg:
kde-i18n-bg: Bulgarian language support for KDE.
kde-i18n-bg:
PACKAGE NAME: kde-i18n-bn-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 837 K
PACKAGE SIZE (uncompressed): 3190 K
PACKAGE DESCRIPTION:
kde-i18n-bn: kde-i18n-bn
kde-i18n-bn:
kde-i18n-bn: Bengali language support for KDE.
kde-i18n-bn:
PACKAGE NAME: kde-i18n-br-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1011 K
PACKAGE SIZE (uncompressed): 3330 K
PACKAGE DESCRIPTION:
kde-i18n-br: kde-i18n-br
kde-i18n-br:
kde-i18n-br: Breton language support for KDE.
kde-i18n-br:
PACKAGE NAME: kde-i18n-bs-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1505 K
PACKAGE SIZE (uncompressed): 4460 K
PACKAGE DESCRIPTION:
kde-i18n-bs: kde-i18n-bs
kde-i18n-bs:
kde-i18n-bs: Bosnian language support for KDE.
kde-i18n-bs:
PACKAGE NAME: kde-i18n-ca-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 7764 K
PACKAGE SIZE (uncompressed): 17810 K
PACKAGE DESCRIPTION:
kde-i18n-ca: kde-i18n-ca
kde-i18n-ca:
kde-i18n-ca: Catalan language support for KDE.
kde-i18n-ca:
PACKAGE NAME: kde-i18n-cs-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3394 K
PACKAGE SIZE (uncompressed): 8400 K
PACKAGE DESCRIPTION:
kde-i18n-cs: kde-i18n-cs
kde-i18n-cs:
kde-i18n-cs: Czech language support for KDE.
kde-i18n-cs:
PACKAGE NAME: kde-i18n-csb-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 382 K
PACKAGE SIZE (uncompressed): 1140 K
PACKAGE DESCRIPTION:
kde-i18n-csb: kde-i18n-csb
kde-i18n-csb:
kde-i18n-csb: Kashubian language support for KDE.
kde-i18n-csb:
PACKAGE NAME: kde-i18n-cy-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1208 K
PACKAGE SIZE (uncompressed): 3780 K
PACKAGE DESCRIPTION:
kde-i18n-cy: kde-i18n-cy
kde-i18n-cy:
kde-i18n-cy: Welsh language support for KDE.
kde-i18n-cy:
PACKAGE NAME: kde-i18n-da-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 12244 K
PACKAGE SIZE (uncompressed): 26320 K
PACKAGE DESCRIPTION:
kde-i18n-da: kde-i18n-da
kde-i18n-da:
kde-i18n-da: Danish language support for KDE.
kde-i18n-da:
PACKAGE NAME: kde-i18n-de-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 21469 K
PACKAGE SIZE (uncompressed): 38150 K
PACKAGE DESCRIPTION:
kde-i18n-de: kde-i18n-de
kde-i18n-de:
kde-i18n-de: German language support for KDE.
kde-i18n-de:
PACKAGE NAME: kde-i18n-el-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3207 K
PACKAGE SIZE (uncompressed): 11320 K
PACKAGE DESCRIPTION:
kde-i18n-el: kde-i18n-el
kde-i18n-el:
kde-i18n-el: Greek language support for KDE.
kde-i18n-el:
PACKAGE NAME: kde-i18n-en_GB-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 4668 K
PACKAGE SIZE (uncompressed): 13410 K
PACKAGE DESCRIPTION:
kde-i18n-en_GB: kde-i18n-en_GB
kde-i18n-en_GB:
kde-i18n-en_GB: English (UK) language support for KDE.
kde-i18n-en_GB:
PACKAGE NAME: kde-i18n-eo-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1183 K
PACKAGE SIZE (uncompressed): 3640 K
PACKAGE DESCRIPTION:
kde-i18n-eo: kde-i18n-eo
kde-i18n-eo:
kde-i18n-eo: Esperanto language support for KDE.
kde-i18n-eo:
PACKAGE NAME: kde-i18n-es-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 34003 K
PACKAGE SIZE (uncompressed): 50550 K
PACKAGE DESCRIPTION:
kde-i18n-es: kde-i18n-es
kde-i18n-es:
kde-i18n-es: Spanish language support for KDE.
kde-i18n-es:
PACKAGE NAME: kde-i18n-et-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 10086 K
PACKAGE SIZE (uncompressed): 23270 K
PACKAGE DESCRIPTION:
kde-i18n-et: kde-i18n-et
kde-i18n-et:
kde-i18n-et: Estonian language support for KDE.
kde-i18n-et:
PACKAGE NAME: kde-i18n-eu-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2723 K
PACKAGE SIZE (uncompressed): 8270 K
PACKAGE DESCRIPTION:
kde-i18n-eu: kde-i18n-eu
kde-i18n-eu:
kde-i18n-eu: Basque language support for KDE.
kde-i18n-eu:
PACKAGE NAME: kde-i18n-fa-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2839 K
PACKAGE SIZE (uncompressed): 9610 K
PACKAGE DESCRIPTION:
kde-i18n-fa: kde-i18n-fa
kde-i18n-fa:
kde-i18n-fa: Persian (Farsi) language support for KDE.
kde-i18n-fa:
PACKAGE NAME: kde-i18n-fi-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2447 K
PACKAGE SIZE (uncompressed): 7180 K
PACKAGE DESCRIPTION:
kde-i18n-fi: kde-i18n-fi
kde-i18n-fi:
kde-i18n-fi: Finnish language support for KDE.
kde-i18n-fi:
PACKAGE NAME: kde-i18n-fr-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 19241 K
PACKAGE SIZE (uncompressed): 33670 K
PACKAGE DESCRIPTION:
kde-i18n-fr: kde-i18n-fr
kde-i18n-fr:
kde-i18n-fr: French language support for KDE.
kde-i18n-fr:
PACKAGE NAME: kde-i18n-fy-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1166 K
PACKAGE SIZE (uncompressed): 3500 K
PACKAGE DESCRIPTION:
kde-i18n-fy: kde-i18n-fy
kde-i18n-fy:
kde-i18n-fy: Abkhasysk language support for KDE.
kde-i18n-fy:
PACKAGE NAME: kde-i18n-ga-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1224 K
PACKAGE SIZE (uncompressed): 3820 K
PACKAGE DESCRIPTION:
kde-i18n-ga: kde-i18n-ga
kde-i18n-ga:
kde-i18n-ga: Irish language support for KDE.
kde-i18n-ga:
PACKAGE NAME: kde-i18n-gl-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2168 K
PACKAGE SIZE (uncompressed): 6550 K
PACKAGE DESCRIPTION:
kde-i18n-gl: kde-i18n-gl
kde-i18n-gl:
kde-i18n-gl: Galician language support for KDE.
kde-i18n-gl:
PACKAGE NAME: kde-i18n-he-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2275 K
PACKAGE SIZE (uncompressed): 6110 K
PACKAGE DESCRIPTION:
kde-i18n-he: kde-i18n-he
kde-i18n-he:
kde-i18n-he: Hebrew language support for KDE.
kde-i18n-he:
PACKAGE NAME: kde-i18n-hi-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1424 K
PACKAGE SIZE (uncompressed): 5260 K
PACKAGE DESCRIPTION:
kde-i18n-hi: kde-i18n-hi
kde-i18n-hi:
kde-i18n-hi: Hindi language support for KDE.
kde-i18n-hi:
PACKAGE NAME: kde-i18n-hr-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1157 K
PACKAGE SIZE (uncompressed): 3600 K
PACKAGE DESCRIPTION:
kde-i18n-hr: kde-i18n-hr
kde-i18n-hr:
kde-i18n-hr: Croatian language support for KDE.
kde-i18n-hr:
PACKAGE NAME: kde-i18n-hu-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3529 K
PACKAGE SIZE (uncompressed): 10110 K
PACKAGE DESCRIPTION:
kde-i18n-hu: kde-i18n-hu
kde-i18n-hu:
kde-i18n-hu: Hungarian language support for KDE.
kde-i18n-hu:
PACKAGE NAME: kde-i18n-is-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2003 K
PACKAGE SIZE (uncompressed): 5910 K
PACKAGE DESCRIPTION:
kde-i18n-is: kde-i18n-is
kde-i18n-is:
kde-i18n-is: Icelandic language support for KDE.
kde-i18n-is:
PACKAGE NAME: kde-i18n-it-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 16827 K
PACKAGE SIZE (uncompressed): 31530 K
PACKAGE DESCRIPTION:
kde-i18n-it: kde-i18n-it
kde-i18n-it:
kde-i18n-it: Italian language support for KDE.
kde-i18n-it:
PACKAGE NAME: kde-i18n-ja-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3361 K
PACKAGE SIZE (uncompressed): 9870 K
PACKAGE DESCRIPTION:
kde-i18n-ja: kde-i18n-ja
kde-i18n-ja:
kde-i18n-ja: Japanese language support for KDE.
kde-i18n-ja:
PACKAGE NAME: kde-i18n-kk-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1807 K
PACKAGE SIZE (uncompressed): 6120 K
PACKAGE DESCRIPTION:
kde-i18n-kk: kde-i18n-kk
kde-i18n-kk:
kde-i18n-kk: Kazakh language support for KDE.
kde-i18n-kk:
PACKAGE NAME: kde-i18n-km-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2206 K
PACKAGE SIZE (uncompressed): 9490 K
PACKAGE DESCRIPTION:
kde-i18n-km: kde-i18n-km
kde-i18n-km:
kde-i18n-km: Khmer language support for KDE.
kde-i18n-km:
PACKAGE NAME: kde-i18n-ko-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2065 K
PACKAGE SIZE (uncompressed): 6100 K
PACKAGE DESCRIPTION:
kde-i18n-ko: kde-i18n-ko
kde-i18n-ko:
kde-i18n-ko: Korean language support for KDE.
kde-i18n-ko:
PACKAGE NAME: kde-i18n-lt-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1369 K
PACKAGE SIZE (uncompressed): 4170 K
PACKAGE DESCRIPTION:
kde-i18n-lt: kde-i18n-lt
kde-i18n-lt:
kde-i18n-lt: Lithuanian language support for KDE.
kde-i18n-lt:
PACKAGE NAME: kde-i18n-lv-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 449 K
PACKAGE SIZE (uncompressed): 1390 K
PACKAGE DESCRIPTION:
kde-i18n-lv: kde-i18n-lv
kde-i18n-lv:
kde-i18n-lv: Latvian language support for KDE.
kde-i18n-lv:
PACKAGE NAME: kde-i18n-mk-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2191 K
PACKAGE SIZE (uncompressed): 7580 K
PACKAGE DESCRIPTION:
kde-i18n-mk: kde-i18n-mk
kde-i18n-mk:
kde-i18n-mk: Macedonian language support for KDE.
kde-i18n-mk:
PACKAGE NAME: kde-i18n-mn-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 465 K
PACKAGE SIZE (uncompressed): 1560 K
PACKAGE DESCRIPTION:
kde-i18n-mn: kde-i18n-mn
kde-i18n-mn:
kde-i18n-mn: Mongolian language support for KDE.
kde-i18n-mn:
PACKAGE NAME: kde-i18n-ms-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1507 K
PACKAGE SIZE (uncompressed): 4530 K
PACKAGE DESCRIPTION:
kde-i18n-ms: kde-i18n-ms
kde-i18n-ms:
kde-i18n-ms: Malay language support for KDE.
kde-i18n-ms:
PACKAGE NAME: kde-i18n-nb-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2498 K
PACKAGE SIZE (uncompressed): 7390 K
PACKAGE DESCRIPTION:
kde-i18n-nb: kde-i18n-nb
kde-i18n-nb:
kde-i18n-nb: Norwegian (Bokmaal) language support for KDE.
kde-i18n-nb:
PACKAGE NAME: kde-i18n-nds-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3464 K
PACKAGE SIZE (uncompressed): 9530 K
PACKAGE DESCRIPTION:
kde-i18n-nds: kde-i18n-nds
kde-i18n-nds:
kde-i18n-nds: Low Saxon language support for KDE.
kde-i18n-nds:
PACKAGE NAME: kde-i18n-nl-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 11697 K
PACKAGE SIZE (uncompressed): 23360 K
PACKAGE DESCRIPTION:
kde-i18n-nl: kde-i18n-nl
kde-i18n-nl:
kde-i18n-nl: Dutch language support for KDE.
kde-i18n-nl:
PACKAGE NAME: kde-i18n-nn-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1829 K
PACKAGE SIZE (uncompressed): 5390 K
PACKAGE DESCRIPTION:
kde-i18n-nn: kde-i18n-nn
kde-i18n-nn:
kde-i18n-nn: Norwegian (Nynorsk) language support for KDE.
kde-i18n-nn:
PACKAGE NAME: kde-i18n-pa-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1100 K
PACKAGE SIZE (uncompressed): 3880 K
PACKAGE DESCRIPTION:
kde-i18n-pa: kde-i18n-pa
kde-i18n-pa:
kde-i18n-pa: Punjabi language support for KDE.
kde-i18n-pa:
PACKAGE NAME: kde-i18n-pl-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 13061 K
PACKAGE SIZE (uncompressed): 23830 K
PACKAGE DESCRIPTION:
kde-i18n-pl: kde-i18n-pl
kde-i18n-pl:
kde-i18n-pl: Polish language support for KDE.
kde-i18n-pl:
PACKAGE NAME: kde-i18n-pt-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 12222 K
PACKAGE SIZE (uncompressed): 26720 K
PACKAGE DESCRIPTION:
kde-i18n-pt: kde-i18n-pt
kde-i18n-pt:
kde-i18n-pt: Portuguese language support for KDE.
kde-i18n-pt:
PACKAGE NAME: kde-i18n-pt_BR-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 12995 K
PACKAGE SIZE (uncompressed): 26390 K
PACKAGE DESCRIPTION:
kde-i18n-pt_BR: kde-i18n-pt_BR
kde-i18n-pt_BR:
kde-i18n-pt_BR: Brazil portuguese language support for KDE.
kde-i18n-pt_BR:
PACKAGE NAME: kde-i18n-ro-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2767 K
PACKAGE SIZE (uncompressed): 5870 K
PACKAGE DESCRIPTION:
kde-i18n-ro: kde-i18n-ro
kde-i18n-ro:
kde-i18n-ro: Romanian language support for KDE.
kde-i18n-ro:
PACKAGE NAME: kde-i18n-ru-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 8642 K
PACKAGE SIZE (uncompressed): 24580 K
PACKAGE DESCRIPTION:
kde-i18n-ru: kde-i18n-ru
kde-i18n-ru:
kde-i18n-ru: Russian language support for KDE.
kde-i18n-ru:
PACKAGE NAME: kde-i18n-rw-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 860 K
PACKAGE SIZE (uncompressed): 2880 K
PACKAGE DESCRIPTION:
kde-i18n-rw: kde-i18n-rw
kde-i18n-rw:
kde-i18n-rw: Kinyarwanda language support for KDE.
kde-i18n-rw:
PACKAGE NAME: kde-i18n-se-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 709 K
PACKAGE SIZE (uncompressed): 2110 K
PACKAGE DESCRIPTION:
kde-i18n-se: kde-i18n-se
kde-i18n-se:
kde-i18n-se: Northern Sami language support for KDE.
kde-i18n-se:
PACKAGE NAME: kde-i18n-sk-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 5780 K
PACKAGE SIZE (uncompressed): 13890 K
PACKAGE DESCRIPTION:
kde-i18n-sk: kde-i18n-sk
kde-i18n-sk:
kde-i18n-sk: Slovak language support for KDE.
kde-i18n-sk:
PACKAGE NAME: kde-i18n-sl-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 4915 K
PACKAGE SIZE (uncompressed): 11610 K
PACKAGE DESCRIPTION:
kde-i18n-sl: kde-i18n-sl
kde-i18n-sl:
kde-i18n-sl: Slovenian language support for KDE.
kde-i18n-sl:
PACKAGE NAME: kde-i18n-sr-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3492 K
PACKAGE SIZE (uncompressed): 10870 K
PACKAGE DESCRIPTION:
kde-i18n-sr: kde-i18n-sr
kde-i18n-sr:
kde-i18n-sr: Serbian language support for KDE.
kde-i18n-sr:
PACKAGE NAME:
[email protected]
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3226 K
PACKAGE SIZE (uncompressed): 8800 K
PACKAGE DESCRIPTION:
kde-i18n-sr@Latn: kde-i18n-sr@Latn
kde-i18n-sr@Latn:
kde-i18n-sr@Latn: Serbian in Latin script language support for KDE.
kde-i18n-sr@Latn:
PACKAGE NAME: kde-i18n-ss-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 218 K
PACKAGE SIZE (uncompressed): 700 K
PACKAGE DESCRIPTION:
kde-i18n-ss: kde-i18n-ss
kde-i18n-ss:
kde-i18n-ss: Swati language support for KDE.
kde-i18n-ss:
PACKAGE NAME: kde-i18n-sv-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 27092 K
PACKAGE SIZE (uncompressed): 41850 K
PACKAGE DESCRIPTION:
kde-i18n-sv: kde-i18n-sv
kde-i18n-sv:
kde-i18n-sv: Swedish language support for KDE.
kde-i18n-sv:
PACKAGE NAME: kde-i18n-ta-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2353 K
PACKAGE SIZE (uncompressed): 9340 K
PACKAGE DESCRIPTION:
kde-i18n-ta: kde-i18n-ta
kde-i18n-ta:
kde-i18n-ta: Tamil language support for KDE.
kde-i18n-ta:
PACKAGE NAME: kde-i18n-te-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 340 K
PACKAGE SIZE (uncompressed): 960 K
PACKAGE DESCRIPTION:
kde-i18n-te: kde-i18n-te
kde-i18n-te:
kde-i18n-te: Telugu language support for KDE.
kde-i18n-te:
PACKAGE NAME: kde-i18n-tg-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2183 K
PACKAGE SIZE (uncompressed): 7440 K
PACKAGE DESCRIPTION:
kde-i18n-tg: kde-i18n-tg
kde-i18n-tg:
kde-i18n-tg: Tajik language support for KDE.
kde-i18n-tg:
PACKAGE NAME: kde-i18n-th-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1203 K
PACKAGE SIZE (uncompressed): 4750 K
PACKAGE DESCRIPTION:
kde-i18n-th: kde-i18n-th
kde-i18n-th:
kde-i18n-th: Thai language support for KDE.
kde-i18n-th:
PACKAGE NAME: kde-i18n-tr-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2226 K
PACKAGE SIZE (uncompressed): 6480 K
PACKAGE DESCRIPTION:
kde-i18n-tr: kde-i18n-tr
kde-i18n-tr:
kde-i18n-tr: Turkish language support for KDE.
kde-i18n-tr:
PACKAGE NAME: kde-i18n-uk-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2519 K
PACKAGE SIZE (uncompressed): 8370 K
PACKAGE DESCRIPTION:
kde-i18n-uk: kde-i18n-uk
kde-i18n-uk:
kde-i18n-uk: Ukrainian language support for KDE.
kde-i18n-uk:
PACKAGE NAME: kde-i18n-uz-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 618 K
PACKAGE SIZE (uncompressed): 2140 K
PACKAGE DESCRIPTION:
kde-i18n-uz: kde-i18n-uz
kde-i18n-uz:
kde-i18n-uz: Uzbek language support for KDE.
kde-i18n-uz:
PACKAGE NAME: kde-i18n-vi-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1003 K
PACKAGE SIZE (uncompressed): 3210 K
PACKAGE DESCRIPTION:
kde-i18n-vi: kde-i18n-vi
kde-i18n-vi:
kde-i18n-vi: Vietnamese language support for KDE.
kde-i18n-vi:
PACKAGE NAME: kde-i18n-wa-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 458 K
PACKAGE SIZE (uncompressed): 1340 K
PACKAGE DESCRIPTION:
kde-i18n-wa: kde-i18n-wa
kde-i18n-wa:
kde-i18n-wa: Walloon language support for KDE.
kde-i18n-wa:
PACKAGE NAME: kde-i18n-zh_CN-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2226 K
PACKAGE SIZE (uncompressed): 6290 K
PACKAGE DESCRIPTION:
kde-i18n-zh_CN: kde-i18n-zh_CN
kde-i18n-zh_CN:
kde-i18n-zh_CN: Simplified Chinese language support for KDE.
kde-i18n-zh_CN:
PACKAGE NAME: kde-i18n-zh_TW-3.5.9-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 2867 K
PACKAGE SIZE (uncompressed): 8250 K
PACKAGE DESCRIPTION:
kde-i18n-zh_TW: kde-i18n-zh_TW
kde-i18n-zh_TW:
kde-i18n-zh_TW: Chinese language support for KDE.
kde-i18n-zh_TW:
PACKAGE NAME: kdeaccessibility-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 9169 K
PACKAGE SIZE (uncompressed): 15040 K
PACKAGE DESCRIPTION:
kdeaccessibility: kdeaccessibility (KDE accessibility programs)
kdeaccessibility:
kdeaccessibility: KDE accessibility programs, including kmag (a screen magnifier),
kdeaccessibility: kmousetool (clicks the mouse for you), and kmouth (a speech
kdeaccessibility: synthesizer frontend).
kdeaccessibility:
PACKAGE NAME: kdeaddons-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 2503 K
PACKAGE SIZE (uncompressed): 9260 K
PACKAGE DESCRIPTION:
kdeaddons: kdeaddons (additional plugins and scripts)
kdeaddons:
kdeaddons: Additional plugins and scripts for some KDE applications.
kdeaddons:
PACKAGE NAME: kdeadmin-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 2021 K
PACKAGE SIZE (uncompressed): 4560 K
PACKAGE DESCRIPTION:
kdeadmin: kdeadmin (KDE administration tools)
kdeadmin:
kdeadmin: KDE system administration tools.
kdeadmin:
PACKAGE NAME: kdeartwork-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 16453 K
PACKAGE SIZE (uncompressed): 26820 K
PACKAGE DESCRIPTION:
kdeartwork: kdeartwork (additional artwork)
kdeartwork:
kdeartwork: Additional themes, screensavers, sounds, wallpapers, and window
kdeartwork: styles.
kdeartwork:
PACKAGE NAME: kdebase-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 29007 K
PACKAGE SIZE (uncompressed): 58480 K
PACKAGE DESCRIPTION:
kdebase: kdebase (KDE base package)
kdebase:
kdebase: Core applications for the K Desktop Environment.
kdebase:
PACKAGE NAME: kdebindings-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 14679 K
PACKAGE SIZE (uncompressed): 62440 K
PACKAGE DESCRIPTION:
kdebindings: kdebindings (bindings for other languages)
kdebindings:
kdebindings: KDE and most KDE applications are implemented using the C++
kdebindings: programming language, but that doesn't mean you don't have a choice.
kdebindings: This package contains a number of bindings to other languages,
kdebindings: including scripting languages and other systems programming languages.
kdebindings:
PACKAGE NAME: kdeedu-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 30540 K
PACKAGE SIZE (uncompressed): 55640 K
PACKAGE DESCRIPTION:
kdeedu: kdeedu (educational applications)
kdeedu:
kdeedu: Educational applications for KDE.
kdeedu:
PACKAGE NAME: kdegames-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 11080 K
PACKAGE SIZE (uncompressed): 20730 K
PACKAGE DESCRIPTION:
kdegames: kdegames (collection of games)
kdegames:
kdegames: A collection of games for the K Desktop Environment.
kdegames:
PACKAGE NAME: kdegraphics-3.5.9-i486-3.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 9236 K
PACKAGE SIZE (uncompressed): 23250 K
PACKAGE DESCRIPTION:
kdegraphics: kdegraphics (KDE graphics programs)
kdegraphics:
kdegraphics: Graphics programs for KDE, including: kdvi (displays TeX's device
kdegraphics: independent .dvi files), kfax (displays fax files), kfract (a fractal
kdegraphics: generator), kghostview (displays postscript .ps files), kpaint (a
kdegraphics: simple drawing program), kruler (an onscreen ruler), ksnapshot (a
kdegraphics: screenshot utility), and kview (displays many graphic file formats).
kdegraphics:
PACKAGE NAME: kdelibs-3.5.9-i486-4.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 19039 K
PACKAGE SIZE (uncompressed): 54020 K
PACKAGE DESCRIPTION:
kdelibs: kdelibs (KDE libraries)
kdelibs:
kdelibs: System libraries and other resources required by KDE.
kdelibs:
PACKAGE NAME: kdemultimedia-3.5.9-i486-3.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 8607 K
PACKAGE SIZE (uncompressed): 24110 K
PACKAGE DESCRIPTION:
kdemultimedia: kdemultimedia (multimedia applications)
kdemultimedia:
kdemultimedia: Multimedia applications for KDE.
kdemultimedia:
PACKAGE NAME: kdenetwork-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 12081 K
PACKAGE SIZE (uncompressed): 30180 K
PACKAGE DESCRIPTION:
kdenetwork: kdenetwork (network utilities for KDE)
kdenetwork:
kdenetwork: Network related utilities for the K Desktop Environment.
kdenetwork:
PACKAGE NAME: kdepim-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 17401 K
PACKAGE SIZE (uncompressed): 46080 K
PACKAGE DESCRIPTION:
kdepim: kdepim (PIM tools)
kdepim:
kdepim: This is a collection of Personal Information Management (PIM) tools.
kdepim:
PACKAGE NAME: kdesdk-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 6963 K
PACKAGE SIZE (uncompressed): 17440 K
PACKAGE DESCRIPTION:
kdesdk: kdesdk (KDE software development kit)
kdesdk:
kdesdk: KDE Software Development Kit. This is a collection of applications
kdesdk: and tools used by KDE developers. It also has example code for use in
kdesdk: learning KDE programming or starting a new KDE application.
kdesdk:
PACKAGE NAME: kdetoys-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 2998 K
PACKAGE SIZE (uncompressed): 4900 K
PACKAGE DESCRIPTION:
kdetoys: kdetoys (toys for KDE)
kdetoys:
kdetoys: Some toys for use with KDE such as kmoon (displays various phases of
kdetoys: the moon), kworldwatch (displays where in the world it is light and
kdetoys: dark depending on time), kodo (a mouse odometer which shows how far
kdetoys: your mouse has traveled), and kteatime (alerts you when your tea is
kdetoys: ready).
kdetoys:
PACKAGE NAME: kdeutils-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 3664 K
PACKAGE SIZE (uncompressed): 9670 K
PACKAGE DESCRIPTION:
kdeutils: kdeutils (various KDE utilities)
kdeutils:
kdeutils: This package includes various utilities for KDE.
kdeutils:
PACKAGE NAME: kdevelop-3.5.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 14874 K
PACKAGE SIZE (uncompressed): 35670 K
PACKAGE DESCRIPTION:
kdevelop: kdevelop (KDE development environment)
kdevelop:
kdevelop: The KDevelop integrated C/C++ application development environment.
kdevelop:
PACKAGE NAME: kdewebdev-3.5.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 6976 K
PACKAGE SIZE (uncompressed): 18080 K
PACKAGE DESCRIPTION:
kdewebdev: kdewebdev (web development package for the K Desktop Environment)
kdewebdev:
kdewebdev: The kdewebdev package contains Quanta Plus and other applications
kdewebdev: which are useful for web development.
kdewebdev:
PACKAGE NAME: kernel-generic-2.6.24.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 2233 K
PACKAGE SIZE (uncompressed): 2920 K
PACKAGE DESCRIPTION:
kernel-generic: kernel-generic (a general purpose single processor Linux kernel)
kernel-generic:
kernel-generic: This is a Linux kernel with built-in support for most IDE controllers.
kernel-generic: For filesystem support, or if you need to load support for a SCSI or
kernel-generic: other controller, then you'll need to load one or more kernel modules
kernel-generic: using an initial ramdisk, or initrd. For more information about
kernel-generic: creating an initrd, see the README.initrd file in the /boot directory.
kernel-generic:
PACKAGE NAME: kernel-generic-smp-2.6.24.5_smp-i686-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 2353 K
PACKAGE SIZE (uncompressed): 3070 K
PACKAGE DESCRIPTION:
kernel-generic-smp: kernel-generic-smp (a general purpose SMP Linux kernel)
kernel-generic-smp:
kernel-generic-smp: This is a Linux kernel with built-in support for most disk
kernel-generic-smp: controllers. To use filesystems, or to load support for a SCSI or
kernel-generic-smp: other controller, then you'll need to load one or more kernel
kernel-generic-smp: modules using an initial ramdisk, or initrd. For more information
kernel-generic-smp: about creating an initrd, see the README.initrd file in the /boot
kernel-generic-smp: directory.
kernel-generic-smp:
kernel-generic-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
kernel-generic-smp:
PACKAGE NAME: kernel-headers-2.6.24.5_smp-x86-2.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2281 K
PACKAGE SIZE (uncompressed): 9660 K
PACKAGE DESCRIPTION:
kernel-headers: kernel-headers (Linux kernel include files)
kernel-headers:
kernel-headers: These are the include files from the Linux kernel.
kernel-headers:
kernel-headers: You'll need these to compile most system software for Linux.
kernel-headers:
PACKAGE NAME: kernel-huge-2.6.24.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 4449 K
PACKAGE SIZE (uncompressed): 5450 K
PACKAGE DESCRIPTION:
kernel-huge: kernel-huge (a fully-loaded single processor Linux kernel)
kernel-huge:
kernel-huge: This is a Linux kernel with built-in support for most disk controllers
kernel-huge: and filesystems. If you're looking for a more stripped down kernel
kernel-huge: (this one contains everything but the kitchen sink ;-), then install
kernel-huge: the kernel-generic from the /boot directory along with an initrd to
kernel-huge: load support for your boot device and filesystem. For instructions
kernel-huge: on the initrd, see README.initrd in the /boot directory.
kernel-huge:
PACKAGE NAME: kernel-huge-smp-2.6.24.5_smp-i686-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 4620 K
PACKAGE SIZE (uncompressed): 5650 K
PACKAGE DESCRIPTION:
kernel-huge-smp: kernel-huge-smp (a fully-loaded SMP Linux kernel)
kernel-huge-smp:
kernel-huge-smp: This is a Linux kernel with built-in support for most disk
kernel-huge-smp: controllers. If you're looking for a more stripped down kernel
kernel-huge-smp: (this one contains everything but the kitchen sink ;-), then install
kernel-huge-smp: the kernel-generic-smp in the /boot directory along with an initrd to
kernel-huge-smp: load support for your boot device and filesystem. For instructions
kernel-huge-smp: on the initrd, see README.initrd in the /boot directory.
kernel-huge-smp:
kernel-huge-smp: SMP is "Symmetric multiprocessing", or multiple CPU/core support.
kernel-huge-smp:
PACKAGE NAME: kernel-modules-2.6.24.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 16701 K
PACKAGE SIZE (uncompressed): 45600 K
PACKAGE DESCRIPTION:
kernel-modules: kernel-modules (single CPU Linux kernel modules)
kernel-modules:
kernel-modules: A kernel module is a piece of object code that can be dynamically
kernel-modules: loaded into the Linux kernel to provide new kernel functions. Most of
kernel-modules: these modules provide support for devices such as CD-ROM drives, tape
kernel-modules: drives, and ethernet cards. You can choose which modules to load by
kernel-modules: editing /etc/rc.d/rc.modules.
kernel-modules:
PACKAGE NAME: kernel-modules-smp-2.6.24.5_smp-i686-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 17418 K
PACKAGE SIZE (uncompressed): 54180 K
PACKAGE DESCRIPTION:
kernel-modules-smp: kernel-modules (SMP Linux kernel modules)
kernel-modules-smp:
kernel-modules-smp: A kernel module is a piece of object code that can be dynamically
kernel-modules-smp: loaded into the Linux kernel to provide new kernel functions. Most of
kernel-modules-smp: these modules provide support for devices such as CD-ROM drives, tape
kernel-modules-smp: drives, and ethernet cards. You can choose which modules to load by
kernel-modules-smp: editing /etc/rc.d/rc.modules.
kernel-modules-smp:
PACKAGE NAME: kernel-source-2.6.24.5_smp-noarch-2.tgz
PACKAGE LOCATION: ./slackware/k
PACKAGE SIZE (compressed): 59230 K
PACKAGE SIZE (uncompressed): 269340 K
PACKAGE DESCRIPTION:
kernel-source: kernel-source (Linux kernel source)
kernel-source:
kernel-source: Source code for Linus Torvalds' Linux kernel.
kernel-source:
kernel-source: This is the complete source code for the Linux kernel.
kernel-source:
kernel-source: A small modification was made to fix a race condition in dnotify.c.
kernel-source: This could otherwise lead to a DoS or root hole (CVE-2008-1375).
kernel-source:
PACKAGE NAME: knemo-0.4.8-i486-2.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 268 K
PACKAGE SIZE (uncompressed): 930 K
PACKAGE DESCRIPTION:
knemo: knemo (The KDE Network Monitor)
knemo:
knemo: KNemo offers a network monitor similar to the one found in that other
knemo: operating system. Supports Ethernet (including wireless) and PPP
knemo: connections, showing both incoming and outgoing traffic.
knemo:
knemo: KNemo was written by Percy Leonhardt.
knemo:
PACKAGE NAME: koffice-1.6.3-i486-3.tgz
PACKAGE LOCATION: ./slackware/kde
PACKAGE SIZE (compressed): 53584 K
PACKAGE SIZE (uncompressed): 101690 K
PACKAGE DESCRIPTION:
koffice: koffice (KDE office productivity suite)
koffice:
koffice: KOffice office productivity applications. Included are a word
koffice: processor, spreadsheet, presentation program, chart and graph creator,
koffice: vector graphics tool, database report creator, flowcharting program,
koffice: integrated data management program, a pixel graphics editor,
koffice: a mathematical formula editor, and KOffice Workspace
koffice: (a combination of all of the above).
koffice:
PACKAGE NAME: koffice-l10n-bg-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 405 K
PACKAGE SIZE (uncompressed): 1330 K
PACKAGE DESCRIPTION:
koffice-l10n-bg: koffice-l10n-bg
koffice-l10n-bg:
koffice-l10n-bg: Bulgarian language support for KOffice.
koffice-l10n-bg:
PACKAGE NAME: koffice-l10n-ca-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1657 K
PACKAGE SIZE (uncompressed): 4210 K
PACKAGE DESCRIPTION:
koffice-l10n-ca: koffice-l10n-ca
koffice-l10n-ca:
koffice-l10n-ca: Catalan language support for KOffice.
koffice-l10n-ca:
PACKAGE NAME: koffice-l10n-cs-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 227 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
koffice-l10n-cs: koffice-l10n-cs
koffice-l10n-cs:
koffice-l10n-cs: Czech language support for KOffice.
koffice-l10n-cs:
PACKAGE NAME: koffice-l10n-cy-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 242 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
koffice-l10n-cy: koffice-l10n-cy
koffice-l10n-cy:
koffice-l10n-cy: Welsh language support for KOffice.
koffice-l10n-cy:
PACKAGE NAME: koffice-l10n-da-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1156 K
PACKAGE SIZE (uncompressed): 3380 K
PACKAGE DESCRIPTION:
koffice-l10n-da: koffice-l10n-da
koffice-l10n-da:
koffice-l10n-da: Danish language support for KOffice.
koffice-l10n-da:
PACKAGE NAME: koffice-l10n-de-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 5670 K
PACKAGE SIZE (uncompressed): 8400 K
PACKAGE DESCRIPTION:
koffice-l10n-de: koffice-l10n-de
koffice-l10n-de:
koffice-l10n-de: German language support for KOffice.
koffice-l10n-de:
PACKAGE NAME: koffice-l10n-el-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 424 K
PACKAGE SIZE (uncompressed): 1420 K
PACKAGE DESCRIPTION:
koffice-l10n-el: koffice-l10n-el
koffice-l10n-el:
koffice-l10n-el: Greek language support for KOffice.
koffice-l10n-el:
PACKAGE NAME: koffice-l10n-en_GB-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 307 K
PACKAGE SIZE (uncompressed): 1080 K
PACKAGE DESCRIPTION:
koffice-l10n-en_GB: koffice-l10n-en_GB
koffice-l10n-en_GB:
koffice-l10n-en_GB: English (UK) language support for KOffice.
koffice-l10n-en_GB:
PACKAGE NAME: koffice-l10n-es-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 14896 K
PACKAGE SIZE (uncompressed): 18170 K
PACKAGE DESCRIPTION:
koffice-l10n-es: koffice-l10n-es
koffice-l10n-es:
koffice-l10n-es: Spanish language support for KOffice.
koffice-l10n-es:
PACKAGE NAME: koffice-l10n-et-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1244 K
PACKAGE SIZE (uncompressed): 3460 K
PACKAGE DESCRIPTION:
koffice-l10n-et: koffice-l10n-et
koffice-l10n-et:
koffice-l10n-et: Estonian language support for KOffice.
koffice-l10n-et:
PACKAGE NAME: koffice-l10n-eu-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 258 K
PACKAGE SIZE (uncompressed): 730 K
PACKAGE DESCRIPTION:
koffice-l10n-eu: koffice-l10n-eu
koffice-l10n-eu:
koffice-l10n-eu: Basque language support for KOffice.
koffice-l10n-eu:
PACKAGE NAME: koffice-l10n-fa-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 374 K
PACKAGE SIZE (uncompressed): 1200 K
PACKAGE DESCRIPTION:
koffice-l10n-fa: koffice-l10n-fa
koffice-l10n-fa:
koffice-l10n-fa: Persian (Farsi) language support for KOffice.
koffice-l10n-fa:
PACKAGE NAME: koffice-l10n-fi-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 256 K
PACKAGE SIZE (uncompressed): 700 K
PACKAGE DESCRIPTION:
koffice-l10n-fi: koffice-l10n-fi
koffice-l10n-fi:
koffice-l10n-fi: Finnish language support for KOffice.
koffice-l10n-fi:
PACKAGE NAME: koffice-l10n-fr-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 5359 K
PACKAGE SIZE (uncompressed): 7820 K
PACKAGE DESCRIPTION:
koffice-l10n-fr: koffice-l10n-fr
koffice-l10n-fr:
koffice-l10n-fr: French language support for KOffice.
koffice-l10n-fr:
PACKAGE NAME: koffice-l10n-ga-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 183 K
PACKAGE SIZE (uncompressed): 500 K
PACKAGE DESCRIPTION:
koffice-l10n-ga: koffice-l10n-ga
koffice-l10n-ga:
koffice-l10n-ga: Irish Gaelic language support for KOffice.
koffice-l10n-ga:
PACKAGE NAME: koffice-l10n-gl-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 436 K
PACKAGE SIZE (uncompressed): 1200 K
PACKAGE DESCRIPTION:
koffice-l10n-gl: koffice-l10n-gl
koffice-l10n-gl:
koffice-l10n-gl: Galician language support for KOffice.
koffice-l10n-gl:
PACKAGE NAME: koffice-l10n-hu-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 342 K
PACKAGE SIZE (uncompressed): 970 K
PACKAGE DESCRIPTION:
koffice-l10n-hu: koffice-l10n-hu
koffice-l10n-hu:
koffice-l10n-hu: Hungarian language support for KOffice.
koffice-l10n-hu:
PACKAGE NAME: koffice-l10n-it-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1595 K
PACKAGE SIZE (uncompressed): 4010 K
PACKAGE DESCRIPTION:
koffice-l10n-it: koffice-l10n-it
koffice-l10n-it:
koffice-l10n-it: Italian language support for KOffice.
koffice-l10n-it:
PACKAGE NAME: koffice-l10n-ja-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 366 K
PACKAGE SIZE (uncompressed): 1090 K
PACKAGE DESCRIPTION:
koffice-l10n-ja: koffice-l10n-ja
koffice-l10n-ja:
koffice-l10n-ja: Japanese language support for KOffice.
koffice-l10n-ja:
PACKAGE NAME: koffice-l10n-km-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 99 K
PACKAGE SIZE (uncompressed): 390 K
PACKAGE DESCRIPTION:
koffice-l10n-km: koffice-l10n-km
koffice-l10n-km:
koffice-l10n-km: Khmer language support for KOffice.
koffice-l10n-km:
PACKAGE NAME: koffice-l10n-lv-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 74 K
PACKAGE SIZE (uncompressed): 220 K
PACKAGE DESCRIPTION:
koffice-l10n-lv: koffice-l10n-lv
koffice-l10n-lv:
koffice-l10n-lv: Latvian language support for KOffice.
koffice-l10n-lv:
PACKAGE NAME: koffice-l10n-ms-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 251 K
PACKAGE SIZE (uncompressed): 710 K
PACKAGE DESCRIPTION:
koffice-l10n-ms: koffice-l10n-ms
koffice-l10n-ms:
koffice-l10n-ms: Malay language support for KOffice.
koffice-l10n-ms:
PACKAGE NAME: koffice-l10n-nb-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 316 K
PACKAGE SIZE (uncompressed): 870 K
PACKAGE DESCRIPTION:
koffice-l10n-nb: koffice-l10n-nb
koffice-l10n-nb:
koffice-l10n-nb: Norwegian (Bokmaal) language support for KOffice.
koffice-l10n-nb:
PACKAGE NAME: koffice-l10n-nds-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 226 K
PACKAGE SIZE (uncompressed): 650 K
PACKAGE DESCRIPTION:
koffice-l10n-nds: koffice-l10n-nds
koffice-l10n-nds:
koffice-l10n-nds: Low Saxon language support for KOffice.
koffice-l10n-nds:
PACKAGE NAME: koffice-l10n-ne-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 413 K
PACKAGE SIZE (uncompressed): 1600 K
PACKAGE DESCRIPTION:
koffice-l10n-ne: koffice-l10n-ne
koffice-l10n-ne:
koffice-l10n-ne: Nepali language support for KOffice.
koffice-l10n-ne:
PACKAGE NAME: koffice-l10n-nl-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 3262 K
PACKAGE SIZE (uncompressed): 5900 K
PACKAGE DESCRIPTION:
koffice-l10n-nl: koffice-l10n-nl
koffice-l10n-nl:
koffice-l10n-nl: Dutch language support for KOffice.
koffice-l10n-nl:
PACKAGE NAME: koffice-l10n-pl-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 388 K
PACKAGE SIZE (uncompressed): 1080 K
PACKAGE DESCRIPTION:
koffice-l10n-pl: koffice-l10n-pl
koffice-l10n-pl:
koffice-l10n-pl: Polish language support for KOffice.
koffice-l10n-pl:
PACKAGE NAME: koffice-l10n-pt-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 1204 K
PACKAGE SIZE (uncompressed): 3620 K
PACKAGE DESCRIPTION:
koffice-l10n-pt: koffice-l10n-pt
koffice-l10n-pt:
koffice-l10n-pt: Portuguese language support for KOffice.
koffice-l10n-pt:
PACKAGE NAME: koffice-l10n-pt_BR-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 5787 K
PACKAGE SIZE (uncompressed): 8420 K
PACKAGE DESCRIPTION:
koffice-l10n-pt_BR: koffice-l10n-pt_BR
koffice-l10n-pt_BR:
koffice-l10n-pt_BR: Brazil portuguese language support for KOffice.
koffice-l10n-pt_BR:
PACKAGE NAME: koffice-l10n-ru-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 927 K
PACKAGE SIZE (uncompressed): 3090 K
PACKAGE DESCRIPTION:
koffice-l10n-ru: koffice-l10n-ru
koffice-l10n-ru:
koffice-l10n-ru: Russian language support for KOffice.
koffice-l10n-ru:
PACKAGE NAME: koffice-l10n-sk-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 844 K
PACKAGE SIZE (uncompressed): 1520 K
PACKAGE DESCRIPTION:
koffice-l10n-sk: koffice-l10n-sk
koffice-l10n-sk:
koffice-l10n-sk: Slovak language support for KOffice.
koffice-l10n-sk:
PACKAGE NAME: koffice-l10n-sl-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 323 K
PACKAGE SIZE (uncompressed): 910 K
PACKAGE DESCRIPTION:
koffice-l10n-sl: koffice-l10n-sl
koffice-l10n-sl:
koffice-l10n-sl: Slovenian language support for KOffice.
koffice-l10n-sl:
PACKAGE NAME: koffice-l10n-sr-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 407 K
PACKAGE SIZE (uncompressed): 1290 K
PACKAGE DESCRIPTION:
koffice-l10n-sr: koffice-l10n-sr
koffice-l10n-sr:
koffice-l10n-sr: Serbian language support for KOffice.
koffice-l10n-sr:
PACKAGE NAME:
[email protected]
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 379 K
PACKAGE SIZE (uncompressed): 1050 K
PACKAGE DESCRIPTION:
koffice-l10n-sr@Latn: koffice-l10n-sr@Latn
koffice-l10n-sr@Latn:
koffice-l10n-sr@Latn: Serbian in Latin script language support for KOffice.
koffice-l10n-sr@Latn:
PACKAGE NAME: koffice-l10n-sv-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 6164 K
PACKAGE SIZE (uncompressed): 8880 K
PACKAGE DESCRIPTION:
koffice-l10n-sv: koffice-l10n-sv
koffice-l10n-sv:
koffice-l10n-sv: Swedish language support for KOffice.
koffice-l10n-sv:
PACKAGE NAME: koffice-l10n-tr-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 299 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
koffice-l10n-tr: koffice-l10n-tr
koffice-l10n-tr:
koffice-l10n-tr: Turkish language support for KOffice.
koffice-l10n-tr:
PACKAGE NAME: koffice-l10n-uk-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 337 K
PACKAGE SIZE (uncompressed): 1060 K
PACKAGE DESCRIPTION:
koffice-l10n-uk: koffice-l10n-uk
koffice-l10n-uk:
koffice-l10n-uk: Ukrainian language support for KOffice.
koffice-l10n-uk:
PACKAGE NAME: koffice-l10n-zh_CN-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 309 K
PACKAGE SIZE (uncompressed): 850 K
PACKAGE DESCRIPTION:
koffice-l10n-zh_CN: koffice-l10n-zh_CN
koffice-l10n-zh_CN:
koffice-l10n-zh_CN: Simplified Chinese language support for KOffice.
koffice-l10n-zh_CN:
PACKAGE NAME: koffice-l10n-zh_TW-1.6.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/kdei
PACKAGE SIZE (compressed): 369 K
PACKAGE SIZE (uncompressed): 1010 K
PACKAGE DESCRIPTION:
koffice-l10n-zh_TW: koffice-l10n-zh_TW
koffice-l10n-zh_TW:
koffice-l10n-zh_TW: Chinese language support for KOffice.
koffice-l10n-zh_TW:
PACKAGE NAME: ksh93-2007_03_28-i486-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 769 K
PACKAGE SIZE (uncompressed): 1980 K
PACKAGE DESCRIPTION:
ksh93: ksh (AT&T Korn Shell 93)
ksh93:
ksh93: The KornShell language and interactive shell were designed by
ksh93: David G. Korn at AT&T Bell Laboratories. Besides offering a powerful
ksh93: interactive shell, it also offers a robust programming language with
ksh93: such features as associative arrays and built in integer math
ksh93: operations. ksh is an excellent choice for system administration
ksh93: scripts and for everyday interactive use.
ksh93:
ksh93: The official site for the Korn Shell is
http://www.kornshell.com/
ksh93:
PACKAGE NAME: lbxproxy-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 68 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
lbxproxy: lbxproxy
lbxproxy:
lbxproxy: lbxproxy is part of X11.
lbxproxy:
lbxproxy: For more information about the X.Org Foundation (the providers of the
lbxproxy: X.Org implementation of the X Window System), see their website:
lbxproxy:
lbxproxy:
http://www.x.org
lbxproxy:
PACKAGE NAME: lcms-1.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 210 K
PACKAGE SIZE (uncompressed): 630 K
PACKAGE DESCRIPTION:
lcms: lcms (little cms engine)
lcms:
lcms: Little cms is a small, speed optimized color management engine.
lcms:
lcms: lcms was written by Marti Maria <
[email protected]>.
lcms:
PACKAGE NAME: less-394-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 101 K
PACKAGE SIZE (uncompressed): 220 K
PACKAGE DESCRIPTION:
less: less (file pager)
less:
less: Less is a paginator similar to more (1), but which allows backward
less: movement in the file as well as forward movement. Also, less does not
less: have to read the entire input file before starting, so with large
less: input files it starts up faster than text editors like vi (1).
less:
less: Less was written by Mark Nudelman.
less:
PACKAGE NAME: lesstif-0.95.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 2140 K
PACKAGE SIZE (uncompressed): 6290 K
PACKAGE DESCRIPTION:
lesstif: lesstif (a free replacement for OSF/Motif(R))
lesstif:
lesstif: LessTif is the Hungry Programmers' (www.hungry.com) free clone of
lesstif: Motif(R). It aims to be source compatible with OSF/Motif(R) meaning
lesstif: that the same source code should compile with both and work exactly
lesstif: the same. This package contains the libraries and header files to
lesstif: be able to run and compile Motif applications, along with the lesstif
lesstif: version of mwm, the Motif window manager.
lesstif:
PACKAGE NAME: lftp-3.7.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 854 K
PACKAGE SIZE (uncompressed): 2340 K
PACKAGE DESCRIPTION:
lftp: lftp (command line file transfer program)
lftp:
lftp: lftp is a program that allows sophisticated ftp and http connections
lftp: to other hosts. lftp can handle many file access methods including
lftp: ftp, ftps, http, https, hftp, fish and file. Every operation in lftp
lftp: is reliable, that is any non-fatal error is ignored and the operation
lftp: is retried. lftp has shell-like command syntax. lftp has a built in
lftp: mirror feature which can download or upload a whole directory tree.
lftp: To learn about many more features of lftp, see 'man lftp'.
lftp:
PACKAGE NAME: lha-114i-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 47 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
lha: lha (LHa archive utility)
lha:
lha: LHa is an archiving and compressing utility written by Tsugio Okamoto.
lha:
PACKAGE NAME: libFS-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 24 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
libFS: libFS
libFS:
libFS: libFS is part of X11.
libFS:
libFS: For more information about the X.Org Foundation (the providers of the
libFS: X.Org implementation of the X Window System), see their website:
libFS:
libFS:
http://www.x.org
libFS:
PACKAGE NAME: libICE-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 45 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
libICE: libICE
libICE:
libICE: libICE is part of X11.
libICE:
libICE: For more information about the X.Org Foundation (the providers of the
libICE: X.Org implementation of the X Window System), see their website:
libICE:
libICE:
http://www.x.org
libICE:
PACKAGE NAME: libSM-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
libSM: libSM
libSM:
libSM: libSM is part of X11.
libSM:
libSM: For more information about the X.Org Foundation (the providers of the
libSM: X.Org implementation of the X Window System), see their website:
libSM:
libSM:
http://www.x.org
libSM:
PACKAGE NAME: libX11-1.1.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1721 K
PACKAGE SIZE (uncompressed): 4770 K
PACKAGE DESCRIPTION:
libX11: libX11
libX11:
libX11: libX11 is part of X11.
libX11:
libX11: For more information about the X.Org Foundation (the providers of the
libX11: X.Org implementation of the X Window System), see their website:
libX11:
libX11:
http://www.x.org
libX11:
PACKAGE NAME: libXScrnSaver-1.1.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXScrnSaver: libXScrnSaver
libXScrnSaver:
libXScrnSaver: libXScrnSaver is part of X11.
libXScrnSaver:
libXScrnSaver: For more information about the X.Org Foundation (the providers of the
libXScrnSaver: X.Org implementation of the X Window System), see their website:
libXScrnSaver:
libXScrnSaver:
http://www.x.org
libXScrnSaver:
PACKAGE NAME: libXTrap-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXTrap: libXTrap
libXTrap:
libXTrap: libXTrap is part of X11.
libXTrap:
libXTrap: For more information about the X.Org Foundation (the providers of the
libXTrap: X.Org implementation of the X Window System), see their website:
libXTrap:
libXTrap:
http://www.x.org
libXTrap:
PACKAGE NAME: libXau-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXau: libXau
libXau:
libXau: libXau is part of X11.
libXau:
libXau: For more information about the X.Org Foundation (the providers of the
libXau: X.Org implementation of the X Window System), see their website:
libXau:
libXau:
http://www.x.org
libXau:
PACKAGE NAME: libXaw-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 519 K
PACKAGE SIZE (uncompressed): 1370 K
PACKAGE DESCRIPTION:
libXaw: libXaw
libXaw:
libXaw: libXaw is part of X11.
libXaw:
libXaw: For more information about the X.Org Foundation (the providers of the
libXaw: X.Org implementation of the X Window System), see their website:
libXaw:
libXaw:
http://www.x.org
libXaw:
PACKAGE NAME: libXcomposite-0.4.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXcomposite: libXcomposite
libXcomposite:
libXcomposite: libXcomposite is part of X11.
libXcomposite:
libXcomposite: For more information about the X.Org Foundation (the providers of the
libXcomposite: X.Org implementation of the X Window System), see their website:
libXcomposite:
libXcomposite:
http://www.x.org
libXcomposite:
PACKAGE NAME: libXcursor-1.1.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 27 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
libXcursor: libXcursor
libXcursor:
libXcursor: libXcursor is part of X11.
libXcursor:
libXcursor: For more information about the X.Org Foundation (the providers of the
libXcursor: X.Org implementation of the X Window System), see their website:
libXcursor:
libXcursor:
http://www.x.org
libXcursor:
PACKAGE NAME: libXdamage-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
libXdamage: libXdamage
libXdamage:
libXdamage: libXdamage is part of X11.
libXdamage:
libXdamage: For more information about the X.Org Foundation (the providers of the
libXdamage: X.Org implementation of the X Window System), see their website:
libXdamage:
libXdamage:
http://www.x.org
libXdamage:
PACKAGE NAME: libXdmcp-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXdmcp: libXdmcp
libXdmcp:
libXdmcp: libXdmcp is part of X11.
libXdmcp:
libXdmcp: For more information about the X.Org Foundation (the providers of the
libXdmcp: X.Org implementation of the X Window System), see their website:
libXdmcp:
libXdmcp:
http://www.x.org
libXdmcp:
PACKAGE NAME: libXevie-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXevie: libXevie
libXevie:
libXevie: libXevie is part of X11.
libXevie:
libXevie: For more information about the X.Org Foundation (the providers of the
libXevie: X.Org implementation of the X Window System), see their website:
libXevie:
libXevie:
http://www.x.org
libXevie:
PACKAGE NAME: libXext-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 70 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
libXext: libXext
libXext:
libXext: libXext is part of X11.
libXext:
libXext: For more information about the X.Org Foundation (the providers of the
libXext: X.Org implementation of the X Window System), see their website:
libXext:
libXext:
http://www.x.org
libXext:
PACKAGE NAME: libXfixes-4.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXfixes: libXfixes
libXfixes:
libXfixes: libXfixes is part of X11.
libXfixes:
libXfixes: For more information about the X.Org Foundation (the providers of the
libXfixes: X.Org implementation of the X Window System), see their website:
libXfixes:
libXfixes:
http://www.x.org
libXfixes:
PACKAGE NAME: libXfont-1.3.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 199 K
PACKAGE SIZE (uncompressed): 450 K
PACKAGE DESCRIPTION:
libXfont: libXfont
libXfont:
libXfont: libXfont is part of X11.
libXfont:
libXfont: For more information about the X.Org Foundation (the providers of the
libXfont: X.Org implementation of the X Window System), see their website:
libXfont:
libXfont:
http://www.x.org
libXfont:
PACKAGE NAME: libXfontcache-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXfontcache: libXfontcache
libXfontcache:
libXfontcache: libXfontcache is part of X11.
libXfontcache:
libXfontcache: For more information about the X.Org Foundation (the providers of the
libXfontcache: X.Org implementation of the X Window System), see their website:
libXfontcache:
libXfontcache:
http://www.x.org
libXfontcache:
PACKAGE NAME: libXft-2.1.12-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 47 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
libXft: libXft
libXft:
libXft: libXft is part of X11.
libXft:
libXft: For more information about the X.Org Foundation (the providers of the
libXft: X.Org implementation of the X Window System), see their website:
libXft:
libXft:
http://www.x.org
libXft:
PACKAGE NAME: libXi-1.1.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 57 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
libXi: libXi
libXi:
libXi: libXi is part of X11.
libXi:
libXi: For more information about the X.Org Foundation (the providers of the
libXi: X.Org implementation of the X Window System), see their website:
libXi:
libXi:
http://www.x.org
libXi:
PACKAGE NAME: libXinerama-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXinerama: libXinerama
libXinerama:
libXinerama: libXinerama is part of X11.
libXinerama:
libXinerama: For more information about the X.Org Foundation (the providers of the
libXinerama: X.Org implementation of the X Window System), see their website:
libXinerama:
libXinerama:
http://www.x.org
libXinerama:
PACKAGE NAME: libXmu-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 59 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
libXmu: libXmu
libXmu:
libXmu: libXmu is part of X11.
libXmu:
libXmu: For more information about the X.Org Foundation (the providers of the
libXmu: X.Org implementation of the X Window System), see their website:
libXmu:
libXmu:
http://www.x.org
libXmu:
PACKAGE NAME: libXp-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 76 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
libXp: libXp
libXp:
libXp: libXp is part of X11.
libXp:
libXp: For more information about the X.Org Foundation (the providers of the
libXp: X.Org implementation of the X Window System), see their website:
libXp:
libXp:
http://www.x.org
libXp:
PACKAGE NAME: libXpm-3.5.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 55 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
libXpm: libXpm
libXpm:
libXpm: libXpm is part of X11.
libXpm:
libXpm: For more information about the X.Org Foundation (the providers of the
libXpm: X.Org implementation of the X Window System), see their website:
libXpm:
libXpm:
http://www.x.org
libXpm:
PACKAGE NAME: libXprintAppUtil-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXprintAppUtil: libXprintAppUtil
libXprintAppUtil:
libXprintAppUtil: libXprintAppUtil is part of X11.
libXprintAppUtil:
libXprintAppUtil: For more information about the X.Org Foundation (the providers of the
libXprintAppUtil: X.Org implementation of the X Window System), see their website:
libXprintAppUtil:
libXprintAppUtil:
http://www.x.org
libXprintAppUtil:
PACKAGE NAME: libXprintUtil-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
libXprintUtil: libXprintUtil
libXprintUtil:
libXprintUtil: libXprintUtil is part of X11.
libXprintUtil:
libXprintUtil: For more information about the X.Org Foundation (the providers of the
libXprintUtil: X.Org implementation of the X Window System), see their website:
libXprintUtil:
libXprintUtil:
http://www.x.org
libXprintUtil:
PACKAGE NAME: libXrandr-1.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 19 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
libXrandr: libXrandr
libXrandr:
libXrandr: libXrandr is part of X11.
libXrandr:
libXrandr: For more information about the X.Org Foundation (the providers of the
libXrandr: X.Org implementation of the X Window System), see their website:
libXrandr:
libXrandr:
http://www.x.org
libXrandr:
PACKAGE NAME: libXrender-0.9.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
libXrender: libXrender
libXrender:
libXrender: libXrender is part of X11.
libXrender:
libXrender: For more information about the X.Org Foundation (the providers of the
libXrender: X.Org implementation of the X Window System), see their website:
libXrender:
libXrender:
http://www.x.org
libXrender:
PACKAGE NAME: libXres-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXres: libXres
libXres:
libXres: libXres is part of X11.
libXres:
libXres: For more information about the X.Org Foundation (the providers of the
libXres: X.Org implementation of the X Window System), see their website:
libXres:
libXres:
http://www.x.org
libXres:
PACKAGE NAME: libXt-1.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 439 K
PACKAGE SIZE (uncompressed): 1100 K
PACKAGE DESCRIPTION:
libXt: libXt
libXt:
libXt: libXt is part of X11.
libXt:
libXt: For more information about the X.Org Foundation (the providers of the
libXt: X.Org implementation of the X Window System), see their website:
libXt:
libXt:
http://www.x.org
libXt:
PACKAGE NAME: libXtst-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libXtst: libXtst
libXtst:
libXtst: libXtst is part of X11.
libXtst:
libXtst: For more information about the X.Org Foundation (the providers of the
libXtst: X.Org implementation of the X Window System), see their website:
libXtst:
libXtst:
http://www.x.org
libXtst:
PACKAGE NAME: libXv-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 26 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
libXv: libXv
libXv:
libXv: libXv is part of X11.
libXv:
libXv: For more information about the X.Org Foundation (the providers of the
libXv: X.Org implementation of the X Window System), see their website:
libXv:
libXv:
http://www.x.org
libXv:
PACKAGE NAME: libXvMC-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
libXvMC: libXvMC
libXvMC:
libXvMC: libXvMC is part of X11.
libXvMC:
libXvMC: For more information about the X.Org Foundation (the providers of the
libXvMC: X.Org implementation of the X Window System), see their website:
libXvMC:
libXvMC:
http://www.x.org
libXvMC:
PACKAGE NAME: libXxf86dga-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
libXxf86dga: libXxf86dga
libXxf86dga:
libXxf86dga: libXxf86dga is part of X11.
libXxf86dga:
libXxf86dga: For more information about the X.Org Foundation (the providers of the
libXxf86dga: X.Org implementation of the X Window System), see their website:
libXxf86dga:
libXxf86dga:
http://www.x.org
libXxf86dga:
PACKAGE NAME: libXxf86misc-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libXxf86misc: libXxf86misc
libXxf86misc:
libXxf86misc: libXxf86misc is part of X11.
libXxf86misc:
libXxf86misc: For more information about the X.Org Foundation (the providers of the
libXxf86misc: X.Org implementation of the X Window System), see their website:
libXxf86misc:
libXxf86misc:
http://www.x.org
libXxf86misc:
PACKAGE NAME: libXxf86vm-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
libXxf86vm: libXxf86vm
libXxf86vm:
libXxf86vm: libXxf86vm is part of X11.
libXxf86vm:
libXxf86vm: For more information about the X.Org Foundation (the providers of the
libXxf86vm: X.Org implementation of the X Window System), see their website:
libXxf86vm:
libXxf86vm:
http://www.x.org
libXxf86vm:
PACKAGE NAME: libaio-0.3.106-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
libaio: libaio (asynchronous I/O library)
libaio:
libaio: The Linux-native asynchronous I/O facility ("async I/O", or "aio")
libaio: has a richer API and capability set than the simple POSIX async I/O
libaio: facility. This library provides the Linux-native API for async I/O.
libaio: The POSIX async I/O facility requires this library in order to
libaio: provide kernel-accelerated async I/O capabilities, as do applications
libaio: which require the Linux-native async I/O API.
libaio:
PACKAGE NAME: libao-0.8.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 41 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
libao: libao (Audio Output library)
libao:
libao: Libao is a cross-platform audio library, and is required by many
libao: programs and other libraries that use audio (some examples include
libao: ogg123, GAIM, and the Ogg Vorbis libraries). This package provides
libao: plugins for OSS, ESD, aRts, and ALSA. You will need to install the
libao: supporting libraries for any plugins you want to use.
libao:
PACKAGE NAME: libart_lgpl-2.3.20-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 112 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
libart_lgpl: libart_lgpl (graphics library)
libart_lgpl:
libart_lgpl: Libart is a library for high-performance 2D graphics. It is used by
libart_lgpl: both KDE and GNOME. This is the LGPL'd component of the library.
libart_lgpl:
libart_lgpl: Raph Levien <
[email protected]> is the author of libart.
libart_lgpl:
PACKAGE NAME: libassuan-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 115 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
libassuan: libassuan (Interprocess Communication Library for GPG)
libassuan:
libassuan: This is the IPC library used by GnuPG 2.x, GPGME and a few other
libassuan: packages.
libassuan:
PACKAGE NAME: libcaca-0.99.beta11-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 523 K
PACKAGE SIZE (uncompressed): 2170 K
PACKAGE DESCRIPTION:
libcaca: libcaca (Colour AsCii Art library)
libcaca:
libcaca: The libcaca library is a graphics library that outputs text instead
libcaca: of pixels, so that it can work on older video cards or text terminals.
libcaca: It is not unlike the famous AAlib library.
libcaca:
libcaca: Sam Hocevar is the main author of libcaca.
libcaca:
PACKAGE NAME: libcddb-1.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 80 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
libcddb: libcddb (An online CD database library)
libcddb:
libcddb: Libcddb is a library that implements the different protocols (CDDBP,
libcddb: HTTP, SMTP) to access data on a CDDB server (
http://freedb.org).
libcddb:
libcddb: Visit the project at:
http://libcddb.sourceforge.net/
libcddb:
PACKAGE NAME: libcdio-0.79-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 370 K
PACKAGE SIZE (uncompressed): 1060 K
PACKAGE DESCRIPTION:
libcdio: libcdio (GNU CD access library)
libcdio:
libcdio: The libcdio package contains a library for CD-ROM and CD image access.
libcdio: Applications wishing to be oblivious of the OS and device-dependent
libcdio: properties of a CD-ROM or of the specific details of various CD-image
libcdio: formats may benefit from using this library. A library for working
libcdio: with ISO-9660 filesystems libiso9660 is included. A generic interface
libcdio: for issuing MMC (multimedia commands) is also part of the libcdio
libcdio: library.
libcdio:
PACKAGE NAME: libdmx-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 30 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
libdmx: libdmx
libdmx:
libdmx: libdmx is part of X11.
libdmx:
libdmx: For more information about the X.Org Foundation (the providers of the
libdmx: X.Org implementation of the X Window System), see their website:
libdmx:
libdmx:
http://www.x.org
libdmx:
PACKAGE NAME: libdrm-2.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 80 K
PACKAGE SIZE (uncompressed): 340 K
PACKAGE DESCRIPTION:
libdrm: libdrm (A library to support Direct Rendering)
libdrm:
libdrm: This library implements an interface to the kernel's DRM services.
libdrm: It is used to support hardware accelerated 3-D rendering.
libdrm:
PACKAGE NAME: liberation-fonts-ttf-1.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1137 K
PACKAGE SIZE (uncompressed): 1830 K
PACKAGE DESCRIPTION:
liberation-fonts-ttf: liberation-fonts-ttf (Liberation TTF Fonts)
liberation-fonts-ttf:
liberation-fonts-ttf: Liberation is the collective name of three TrueType font
liberation-fonts-ttf: families: Liberation Sans, Liberation Serif and Liberation
liberation-fonts-ttf: Mono. These fonts are metric-compatible with Arial, Times
liberation-fonts-ttf: New Roman, and Courier New respectively.
liberation-fonts-ttf:
liberation-fonts-ttf: The fonts were developed by Steve Matteson of Ascender Corp.
liberation-fonts-ttf: for Red Hat, Inc.
liberation-fonts-ttf:
PACKAGE NAME: libexif-0.6.16-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 307 K
PACKAGE SIZE (uncompressed): 980 K
PACKAGE DESCRIPTION:
libexif: libexif
libexif:
libexif: EXIF stands for Exchangeable Image File Format, which is a format used
libexif: to store extra information in images such as the JPEG files produced
libexif: by digital cameras. The libexif library allows programs such as
libexif: gthumb to parse, edit, and save EXIF data.
libexif:
PACKAGE NAME: libfontenc-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
libfontenc: libfontenc
libfontenc:
libfontenc: libfontenc is part of X11.
libfontenc:
libfontenc: For more information about the X.Org Foundation (the providers of the
libfontenc: X.Org implementation of the X Window System), see their website:
libfontenc:
libfontenc:
http://www.x.org
libfontenc:
PACKAGE NAME: libgcrypt-1.4.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 574 K
PACKAGE SIZE (uncompressed): 1340 K
PACKAGE DESCRIPTION:
libgcrypt: libgcrypt (General purpose crypto library)
libgcrypt:
libgcrypt: Libgcrypt is a general purpose crypto library based on the code
libgcrypt: used in GnuPG.
libgcrypt:
PACKAGE NAME: libglade-2.6.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 94 K
PACKAGE SIZE (uncompressed): 390 K
PACKAGE DESCRIPTION:
libglade: libglade (GLADE library)
libglade:
libglade: The GLADE library allows loading user interfaces which are stored
libglade: externally into a program. This allows the interface to be changed
libglade: without recompiling the program. The interfaces can also be edited
libglade: with GLADE.
libglade:
PACKAGE NAME: libgpg-error-1.6-i486-3.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 84 K
PACKAGE SIZE (uncompressed): 380 K
PACKAGE DESCRIPTION:
libgpg-error: libgpg-error (GnuPG Error Definitions Library)
libgpg-error:
libgpg-error: This is a library that defines common error values for all GnuPG
libgpg-error: components. Among these are GPG, GPGSM, GPGME, GPG-Agent,
libgpg-error: libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon, and more.
libgpg-error:
PACKAGE NAME: libgpod-0.6.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 286 K
PACKAGE SIZE (uncompressed): 980 K
PACKAGE DESCRIPTION:
libgpod: libgpod (A library for connecting to some sort of media device ;-)
libgpod:
libgpod: libgpod for accessing iPod content. It provides an easy to use way
libgpod: to retrieve the list of files and playlist stored on an iPod, to
libgpod: modify them and to save them back to the iPod.
libgpod:
libgpod: If you decide to make improvements please contact us so we can work
libgpod: together. Just drop a mail to:
[email protected]
libgpod: (you may ask to be CC in the answer).
libgpod:
PACKAGE NAME: libgsf-1.14.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 226 K
PACKAGE SIZE (uncompressed): 1260 K
PACKAGE DESCRIPTION:
libgsf: libgsf (structured file I/O library)
libgsf:
libgsf: libgsf aims to provide an efficient extensible I/O abstraction for
libgsf: dealing with different structured file formats.
libgsf:
libgsf: libgsf is used by libwv2, which is used by various word processors
libgsf: to import .doc format files.
libgsf:
PACKAGE NAME: libgtkhtml-2.11.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 187 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
libgtkhtml: libgtkhtml (lightweight HTML engine)
libgtkhtml:
libgtkhtml: GtkHTML is a lightweight HTML rendering/printing/editing engine. It
libgtkhtml: was originally based on KHTMLW, part of the KDE project.
libgtkhtml:
libgtkhtml: libgtkhtml is used by the GIMP help browser.
libgtkhtml:
PACKAGE NAME: libhangul-0.0.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2391 K
PACKAGE SIZE (uncompressed): 6430 K
PACKAGE DESCRIPTION:
libhangul: libhangul (Hangul keyboard input library)
libhangul:
libhangul: This library implements Hangul keyboard input with various types of
libhangul: Korean keyboards. It is intended to be a base library of Korean
libhangul: input methods on multiple platforms.
libhangul:
libhangul: libhangul home:
http://kldp.net/projects/hangul/
libhangul:
PACKAGE NAME: libid3tag-0.15.1b-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 40 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
libid3tag: libid3tag (ID3 tag manipulation library)
libid3tag:
libid3tag: libid3tag is a library for reading and (eventually) writing ID3 tags,
libid3tag: both ID3v1 and the various versions of ID3v2.
libid3tag:
libid3tag: libid3tag was written by Robert Leslie.
libid3tag:
PACKAGE NAME: libidl-0.8.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 89 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
libidl: libIDL (IDL library)
libidl:
libidl: libIDL is a library licensed under the GNU LGPL for creating trees of
libidl: CORBA Interface Definition Language (IDL) files, which is a
libidl: specification for defining portable interfaces.
libidl:
libidl: libIDL is used by SeaMonkey and the Mozilla Suite.
libidl:
PACKAGE NAME: libidn-1.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 392 K
PACKAGE SIZE (uncompressed): 1180 K
PACKAGE DESCRIPTION:
libidn: libidn (GNU Internationalized Domain Name library)
libidn:
libidn: GNU Libidn is an implementation of the Stringprep, Punycode and IDNA
libidn: specifications defined by the IETF Internationalized Domain Names
libidn: (IDN) working group, used for internationalized domain names.
libidn:
PACKAGE NAME: libieee1284-0.2.11-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 91 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
libieee1284: libieee1284 (parallel port library)
libieee1284:
libieee1284: This library is intended to be used by applications that need to
libieee1284: communicate with (or at least identify) devices that are attached via
libieee1284: a parallel port. For example, SANE uses it to identify scanners.
libieee1284:
PACKAGE NAME: libjpeg-6b-i486-5.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 394 K
PACKAGE SIZE (uncompressed): 980 K
PACKAGE DESCRIPTION:
libjpeg: libjpeg (Independent JPEG Group's JPEG software)
libjpeg:
libjpeg: Software to implement JPEG image compression and decompression. JPEG
libjpeg: (pronounced 'jay-peg') is a standardized compression method for
libjpeg: full-color and gray-scale images. JPEG is intended for compressing
libjpeg: 'real-world' scenes; cartoons and other non-realistic images are not
libjpeg: its strong suit. JPEG is lossy, however, on typical images of
libjpeg: real-world scenes, very good compression levels can be obtained with
libjpeg: no visible change, and amazingly high compression levels are possible
libjpeg: if you can tolerate a low-quality image.
libjpeg:
PACKAGE NAME: libkarma-0.1.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 63 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
libkarma: libkarma (library for accessing the Rio Karma music player)
libkarma:
libkarma: This is a library for accessing the Rio Karma, a small media player
libkarma: which supports the music formats ogg vorbis, flac, mp3, wave and wma.
libkarma:
libkarma: libkarma was mostly written by Frank Zschockelt.
libkarma:
PACKAGE NAME: libksba-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 138 K
PACKAGE SIZE (uncompressed): 330 K
PACKAGE DESCRIPTION:
libksba: libksba (X.509 & CMS library for S/MIME and TLS)
libksba:
libksba: KSBA (pronounced Kasbah) is a library to make X.509 certificates as
libksba: well as the CMS easily accessible by other applications.
libksba: Both specifications are building blocks of S/MIME and TLS.
libksba:
PACKAGE NAME: liblbxutil-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
liblbxutil: liblbxutil
liblbxutil:
liblbxutil: liblbxutil is part of X11.
liblbxutil:
liblbxutil: For more information about the X.Org Foundation (the providers of the
liblbxutil: X.Org implementation of the X Window System), see their website:
liblbxutil:
liblbxutil:
http://www.x.org
liblbxutil:
PACKAGE NAME: libmad-0.15.1b-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 86 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
libmad: libmad (high-quality MPEG audio library)
libmad:
libmad: MAD (libmad) is a high-quality MPEG audio decoder. It currently
libmad: supports MPEG-1 and the MPEG-2 extension to Lower Sampling
libmad: Frequencies, as well as the so-called MPEG 2.5 format. All three
libmad: audio layers (Layer I, Layer II, and Layer III a.k.a. MP3) are
libmad: fully implemented. Because MAD provides full 24-bit PCM output,
libmad: applications using MAD are able to produce high quality audio.
libmad: MAD is distributed under the terms of the GPL.
libmad:
libmad: MAD (libmad) was written by Robert Leslie.
PACKAGE NAME: libmcs-0.7.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 22 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
libmcs: libmcs (A library for managing configuration settings)
libmcs:
libmcs: mcs is a library and set of userland tools which abstract the
libmcs: storage of configuration settings away from userland applications.
libmcs:
libmcs: It is hoped that by using mcs, that the applications which use it
libmcs: will generally have a more congruent feeling in regards to settings.
libmcs:
libmcs: Because mcs is licenced under the BSD license, it is hoped that
libmcs: many applications will adopt its use.
libmcs:
PACKAGE NAME: libmng-1.0.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 245 K
PACKAGE SIZE (uncompressed): 770 K
PACKAGE DESCRIPTION:
libmng: libmng (Multiple-image Network Graphics library)
libmng:
libmng: This is libmng, the MNG reference library. MNG (pronounced 'ming'),
libmng: is short for Multiple-image Network Graphics. Designed with the same
libmng: modular philosophy as PNG and by many of the same people, MNG is
libmng: intended to provide a home for all of the multi-image (animation)
libmng: capabilities that have no place in PNG.
libmng:
libmng: libmng was written by Gerard Juyn.
libmng:
PACKAGE NAME: libmowgli-0.6.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 31 K
PACKAGE SIZE (uncompressed): 160 K
PACKAGE DESCRIPTION:
libmowgli: libmowgli (A useful collection of routines for programming)
libmowgli:
libmowgli: libmowgli is a class library containing performance and usability
libmowgli: oriented extensions to C.
libmowgli:
libmowgli: libmowgli was written by Patrick McFarland, William Pitcock,
libmowgli: Jonathan Schleifer, Pippijn van Steenhoven, and Jilles Tjoelker.
libmowgli:
PACKAGE NAME: libmtp-0.2.6.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 309 K
PACKAGE SIZE (uncompressed): 1830 K
PACKAGE DESCRIPTION:
libmtp: libmtp (A library for MTP media devices)
libmtp:
libmtp: libmtp is a library that attempts to support Microsoft's Media
libmtp: Transfer Protocol (MTP). It was initially based the great libptp2
libmtp: library by Mariusz Woloszyn now maintained by Marcus Meissners, and
libmtp: Hubert Figuere's libgphoto2 work based on libptp2 (or is libptp2
libmtp: based on libgphoto?). It is like a master DJ has remixed all of
libmtp: these tracks and then added a new API adapted for portable media
libmtp: players. :-)
libmtp:
libmtp: For the latest info, check out:
http://libmtp.sourceforge.net
PACKAGE NAME: libnjb-2.2.6-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 329 K
PACKAGE SIZE (uncompressed): 1830 K
PACKAGE DESCRIPTION:
libnjb: libnjb (A library for Creative Nomad related media devices)
libnjb:
libnjb: libnjb is a C library and API for communicating with the Creative
libnjb: Nomad JukeBox and Dell DJ digital audio players under BSD, Linux,
libnjb: Mac OS X, and Windows. The protocol these devices use is presumably
libnjb: called PDE (Portable Digital Entertainment protocol) at Creative.
libnjb: Newer devices using the Microsoft MTP (Media Transfer Protocol)
libnjb: are NOT supported.
libnjb:
libnjb: Home page:
http://libnjb.sourceforge.net
libnjb:
PACKAGE NAME: libogg-1.1.3-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 81 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
libogg: libogg (Ogg Bitstream library)
libogg:
libogg: Libogg is a library for manipulating ogg bitstreams. It handles
libogg: both making ogg bitstreams and getting packets from ogg bitstreams.
libogg:
libogg: libogg is needed to use the Ogg Vorbis audio format.
libogg:
PACKAGE NAME: liboldX-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
liboldX: liboldX
liboldX:
liboldX: liboldX is part of X11.
liboldX:
liboldX: For more information about the X.Org Foundation (the providers of the
liboldX: X.Org implementation of the X Window System), see their website:
liboldX:
liboldX:
http://www.x.org
liboldX:
PACKAGE NAME: libpciaccess-0.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
libpciaccess: libpciaccess
libpciaccess:
libpciaccess: libpciaccess is part of X11.
libpciaccess:
libpciaccess: For more information about the X.Org Foundation (the providers of the
libpciaccess: X.Org implementation of the X Window System), see their website:
libpciaccess:
libpciaccess:
http://www.x.org
libpciaccess:
PACKAGE NAME: libpng-1.2.27-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 467 K
PACKAGE SIZE (uncompressed): 1180 K
PACKAGE DESCRIPTION:
libpng: libpng (Portable Network Graphics library)
libpng:
libpng: PNG (Portable Network Graphics) is an extensible file format for the
libpng: lossless, portable, well-compressed storage of raster images. PNG
libpng: provides a patent-free replacement for GIF and can also replace many
libpng: common uses of TIFF. Indexed-color, grayscale, and truecolor images
libpng: are supported, plus an optional alpha channel. Sample depths range
libpng: from 1 to 16 bits.
libpng:
PACKAGE NAME: libpthread-stubs-0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 10 K
PACKAGE DESCRIPTION:
libpthread-stubs: libpthread-stubs
libpthread-stubs:
libpthread-stubs: libpthread-stubs is part of X11.
libpthread-stubs:
libpthread-stubs: For more information about the X.Org Foundation (the providers of the
libpthread-stubs: X.Org implementation of the X Window System), see their website:
libpthread-stubs:
libpthread-stubs:
http://www.x.org
libpthread-stubs:
PACKAGE NAME: librsvg-2.22.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 153 K
PACKAGE SIZE (uncompressed): 470 K
PACKAGE DESCRIPTION:
librsvg: librsvg (SVG library)
librsvg:
librsvg: Library for handling SVG (Scalable Vector Graphics).
librsvg:
PACKAGE NAME: libtermcap-1.2.3-i486-7.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 60 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
libtermcap: libtermcap
libtermcap:
libtermcap: This is the GNU termcap library -- a library of C functions that
libtermcap: enable programs to send control strings to terminals in a way
libtermcap: independent of the terminal type. Most of this package is also
libtermcap: distributed with GNU Emacs, but it is available in this separate
libtermcap: distribution to make it easier to install as -ltermcap.
libtermcap:
PACKAGE NAME: libtheora-1.0beta2-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 140 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
libtheora: libtheora (Theora video codec library)
libtheora:
libtheora: Theora is Xiph.Org's first publicly released video codec, intended
libtheora: for use within the Foundation's Ogg multimedia streaming system.
libtheora:
libtheora: The Theora bitstream format was frozen after the alpha3 release. This
libtheora: means that files produced by the alpha3 encoder will always be
libtheora: playable according to the Theora I specification. Traditionally
libtheora: alpha means a proof of concept, not a production-ready release.
libtheora: However the code is very robust, ready for and indeed in general use.
libtheora:
PACKAGE NAME: libtiff-3.8.2-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 517 K
PACKAGE SIZE (uncompressed): 1340 K
PACKAGE DESCRIPTION:
libtiff: libtiff (a library for reading and writing TIFF files)
libtiff:
libtiff: This package provides support for the Tag Image File Format (TIFF),
libtiff: a widely used format for storing image data. Included is the libtiff
libtiff: library (for reading and writing TIFF files), and a collection of
libtiff: tools for working with TIFF images.
libtiff:
PACKAGE NAME: libtool-1.5.24-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 642 K
PACKAGE SIZE (uncompressed): 2480 K
PACKAGE DESCRIPTION:
libtool: libtool (a generic library support script)
libtool:
libtool: This is GNU Libtool, a generic library support script. Libtool hides
libtool: the complexity of using shared libraries behind a consistent, portable
libtool: interface. To use libtool, add the new generic library building
libtool: commands to your Makefile, Makefile.in, or Makefile.am. See the
libtool: documentation for details.
libtool:
libtool: You must install the "m4" package to be able to use libtool.
libtool:
PACKAGE NAME: libungif-4.1.4-i486-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 208 K
PACKAGE SIZE (uncompressed): 730 K
PACKAGE DESCRIPTION:
libungif: libungif (GIF image format library)
libungif:
libungif: A library to load and save (uncompressed only) images using GIF,
libungif: or Graphics Interchange Format. GIF was introduced by CompuServe
libungif: in 1987, but is still widely used today (especially on web pages.)
libungif:
PACKAGE NAME: libusb-0.1.12-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 124 K
PACKAGE SIZE (uncompressed): 520 K
PACKAGE DESCRIPTION:
libusb: libusb (USB library)
libusb:
libusb: This is libusb, a library which allows userspace application access
libusb: to USB devices. It is used to connect to USB devices like scanners.
libusb:
PACKAGE NAME: libvisual-0.4.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 150 K
PACKAGE SIZE (uncompressed): 550 K
PACKAGE DESCRIPTION:
libvisual: libvisual (audio visualization library)
libvisual:
libvisual: Libvisual is an audio visualization library that acts as a middle
libvisual: layer between audio visualization plugins and applications. Any
libvisual: application written with libvisual support included will be able to
libvisual: make use of all the plugins that are written for libvisual.
libvisual: Libvisual also contains a whole set of facilities to ease the
libvisual: development of plugins.
libvisual:
libvisual: Libvisual was written by Dennis Smit.
libvisual:
PACKAGE NAME: libvorbis-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 638 K
PACKAGE SIZE (uncompressed): 3210 K
PACKAGE DESCRIPTION:
libvorbis: libvorbis (Ogg Vorbis library)
libvorbis:
libvorbis: This library supports the Vorbis General Audio Compression Codec
libvorbis: (commonly known as Ogg Vorbis). Ogg Vorbis is a fully open,
libvorbis: non-proprietary, patent-and-royalty-free, general-purpose compressed
libvorbis: audio format for audio and music at fixed and variable bitrates.
libvorbis:
libvorbis: The libvorbis library requires libao and libogg. You'll find some
libvorbis: basic tools for creating and using Ogg Vorbis files in the
libvorbis: vorbis-tools package.
libvorbis:
PACKAGE NAME: libwmf-0.2.8.4-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 830 K
PACKAGE SIZE (uncompressed): 1570 K
PACKAGE DESCRIPTION:
libwmf: libwmf (WMF graphics format library)
libwmf:
libwmf: libwmf is a library for interpreting metafile images and either
libwmf: displaying them using X or converting them to standard formats such
libwmf: as PNG, JPEG, PS, EPS and SVG.
libwmf:
PACKAGE NAME: libwmf-docs-0.2.8.4-noarch-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 268 K
PACKAGE SIZE (uncompressed): 2320 K
PACKAGE DESCRIPTION:
libwmf-docs: libwmf-docs (extra documentation for libwmf)
libwmf-docs:
libwmf-docs: This package contains extra documentation useful for programming with
libwmf-docs: the libwmf (metafile graphics format) library.
libwmf-docs:
PACKAGE NAME: libwnck-2.18.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 179 K
PACKAGE SIZE (uncompressed): 940 K
PACKAGE DESCRIPTION:
libwnck: libwnck (Window Navigator Construction Kit library)
libwnck:
libwnck: libwnck is the Window Navigator Construction Kit, a library for use
libwnck: in writing pagers, tasklists, and more generally applications that
libwnck: are dealing with window management. It tries hard to respect the
libwnck: Extended Window Manager Hints specification (EWMH).
libwnck:
libwnck: libwnck is used by compiz to provide the gtk-window-decorator program.
libwnck:
PACKAGE NAME: libwpd-0.8.14-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 258 K
PACKAGE SIZE (uncompressed): 780 K
PACKAGE DESCRIPTION:
libwpd: libwpd (WordPerfect document format library)
libwpd:
libwpd: This package contains a library (libwpd) and tools to transform
libwpd: WordPerfect documents into other formats such as HTML, text, and raw.
libwpd:
libwpd: libwpd is used by word processors such as KWord.
libwpd:
PACKAGE NAME: libxcb-1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 231 K
PACKAGE SIZE (uncompressed): 2040 K
PACKAGE DESCRIPTION:
libxcb: libxcb (X protocol C-language Binding)
libxcb:
libxcb: The XCB library provides an interface to the X Window System protocol
libxcb: which is fully capable of replacing Xlib. In fact, libX11 makes use
libxcb: of libxcb as much as possible. :-) Porting to XCB has several
libxcb: advantages such as a smaller memory footprint, latency hiding, direct
libxcb: protocol access, and improved thread support.
libxcb:
PACKAGE NAME: libxkbfile-1.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 69 K
PACKAGE SIZE (uncompressed): 190 K
PACKAGE DESCRIPTION:
libxkbfile: libxkbfile
libxkbfile:
libxkbfile: libxkbfile is part of X11.
libxkbfile:
libxkbfile: For more information about the X.Org Foundation (the providers of the
libxkbfile: X.Org implementation of the X Window System), see their website:
libxkbfile:
libxkbfile:
http://www.x.org
libxkbfile:
PACKAGE NAME: libxkbui-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
libxkbui: libxkbui
libxkbui:
libxkbui: libxkbui is part of X11.
libxkbui:
libxkbui: For more information about the X.Org Foundation (the providers of the
libxkbui: X.Org implementation of the X Window System), see their website:
libxkbui:
libxkbui:
http://www.x.org
libxkbui:
PACKAGE NAME: libxml2-2.6.31-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 2228 K
PACKAGE SIZE (uncompressed): 9990 K
PACKAGE DESCRIPTION:
libxml2: libxml2 (XML parser library)
libxml2:
libxml2: Libxml2 is the XML C parser library and toolkit. XML itself is a
libxml2: metalanguage to design markup languages -- i.e. a text language where
libxml2: structures are added to the content using extra "markup" information
libxml2: enclosed between angle brackets. HTML is the most well-known markup
libxml2: language. Though the library is written in C, a variety of language
libxml2: bindings make it available in other environments.
libxml2:
PACKAGE NAME: libxslt-1.1.22-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 647 K
PACKAGE SIZE (uncompressed): 2710 K
PACKAGE DESCRIPTION:
libxslt: libxslt (XML transformation library)
libxslt:
libxslt: XSLT support for libxml2. (XSLT is a language used for transforming
libxslt: XML documents)
libxslt:
PACKAGE NAME: lilo-22.8-i486-12.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 306 K
PACKAGE SIZE (uncompressed): 860 K
PACKAGE DESCRIPTION:
lilo: lilo (Linux Loader)
lilo:
lilo: Generic Boot Loader for Linux ('LInux LOader') by Werner Almesberger.
lilo: LILO boots Linux from your hard drive. It can also boot other
lilo: operating systems such as MS-DOS and OS/2, and can even boot DOS from
lilo: the second hard drive. LILO comes with utilities and documentation
lilo: that make it easier to install, such as 'liloconfig' and 'QuickStart'.
lilo: NOTE: Installing boot loaders is inherently dangerous. Be sure to have
lilo: some means to boot your system from a different media if you install
lilo: LILO on your hard disk.
lilo:
PACKAGE NAME: links-2.1pre33-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1891 K
PACKAGE SIZE (uncompressed): 2820 K
PACKAGE DESCRIPTION:
links: links (WWW browser for the console)
links:
links: Links is a console mode WWW browser, supporting colors, correct table
links: rendering, background downloading, frames, Javascript, and a menu
links: driven configuration interface. The default is text output, but
links: graphical output (using -g) is also supported using the Linux
links: framebuffer console or SVGAlib.
links:
links: links was written by Mikulas Patocka.
links:
PACKAGE NAME: linux-faqs-20060228-noarch-1.tgz
PACKAGE LOCATION: ./slackware/f
PACKAGE SIZE (compressed): 339 K
PACKAGE SIZE (uncompressed): 1100 K
PACKAGE DESCRIPTION:
linux-faqs: linux-faqs (Linux FAQ collection from ibiblio.org)
linux-faqs:
linux-faqs: Frequently Asked Questions (and answers!) on many Linux topics.
linux-faqs:
linux-faqs: Some of the FAQs included in this package:
linux-faqs: ATAPI-FAQ, AfterStep-FAQ, BLFAQ (Brief Linux FAQ), Ftape-FAQ,
linux-faqs: GCC-SIG11-FAQ, Joe-Command-Reference, the Linux-FAQ, PPP-FAQ, SMP-FAQ,
linux-faqs: and the Threads-FAQ.
linux-faqs:
linux-faqs: These FAQs will be installed under /usr/doc/Linux-FAQs/.
linux-faqs:
PACKAGE NAME: linux-howtos-20080411-noarch-1.tgz
PACKAGE LOCATION: ./slackware/f
PACKAGE SIZE (compressed): 8632 K
PACKAGE SIZE (uncompressed): 31390 K
PACKAGE DESCRIPTION:
linux-howtos: linux-howtos (HOWTOs from the Linux Documentation Project)
linux-howtos:
linux-howtos: Documentation on many tasks relating to Linux setup and operation.
linux-howtos:
linux-howtos: These documents will be installed in /usr/doc/Linux-HOWTOs/.
linux-howtos:
PACKAGE NAME: linuxdoc-tools-0.9.21-i486-5.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 6841 K
PACKAGE SIZE (uncompressed): 32280 K
PACKAGE DESCRIPTION:
linuxdoc-tools: linuxdoc-tools (utilities for working with DocBook and SGML)
linuxdoc-tools:
linuxdoc-tools: SGML stands for Standard Generalized Markup Language. This is a
linuxdoc-tools: system which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
linuxdoc-tools: and plain text (via groff) from a single source file in SGML. It is
linuxdoc-tools: often used for technical software documentation, such as the Linux
linuxdoc-tools: HOWTO documents.
linuxdoc-tools:
linuxdoc-tools: This package includes everything you need to use SGML -- all of the
linuxdoc-tools: standard SGML tools; OpenJade; tools for working with DocBook
linuxdoc-tools: documents (various DTDs); xmlto and AsciiDoc.
PACKAGE NAME: listres-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
listres: listres
listres:
listres: listres is part of X11.
listres:
listres: For more information about the X.Org Foundation (the providers of the
listres: X.Org implementation of the X Window System), see their website:
listres:
listres:
http://www.x.org
listres:
PACKAGE NAME: lm_sensors-2.10.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 324 K
PACKAGE SIZE (uncompressed): 1210 K
PACKAGE DESCRIPTION:
lm_sensors: lm_sensors (hardware monitoring package)
lm_sensors:
lm_sensors: lm_sensors provides tools for monitoring the temperatures, voltages,
lm_sensors: and fans of Linux systems with hardware monitoring devices. Included
lm_sensors: are text-based tools for sensor reporting, and a library for sensors
lm_sensors: access called libsensors. It also contains tools for sensor hardware
lm_sensors: identification and I2C bus probing.
lm_sensors:
lm_sensors: IMPORTANT NOTE: If you have a Thinkpad, please read the warnings in
lm_sensors: the README.thinkpad file. lm_sensors has been known to cause damage
lm_sensors: to some Thinkpads.
PACKAGE NAME: lndir-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
lndir: lndir
lndir:
lndir: lndir is part of X11.
lndir:
lndir: For more information about the X.Org Foundation (the providers of the
lndir: X.Org implementation of the X Window System), see their website:
lndir:
lndir:
http://www.x.org
lndir:
PACKAGE NAME: loadlin-1.6c-i386-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 95 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
loadlin: loadlin (loads a Linux kernel from MS-DOS)
loadlin:
loadlin: LOADLIN.EXE, a loader (running under DOS) for LINUX kernel images
loadlin: fully supporting the kernel's command line feature.
loadlin:
loadlin: LOADLIN is the safest way to boot Linux from your hard disk, if you
loadlin: have a bootable DOS partition on your machine.
loadlin:
loadlin: LOADLIN was written by Hans Lermen (
[email protected])
loadlin:
PACKAGE NAME: logrotate-3.7.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 34 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
logrotate: logrotate (system log rotation tool)
logrotate:
logrotate: The logrotate utility is designed to simplify the administration
logrotate: of log files on a system which generates a lot of log files.
logrotate: Logrotate allows for the automatic rotation compression, removal
logrotate: and mailing of log files. Logrotate can be set to handle a log
logrotate: file daily, weekly, monthly or when the log file gets to a certain
logrotate: size. Normally, logrotate runs as a daily cron job.
logrotate:
PACKAGE NAME: lsof-4.78-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 306 K
PACKAGE SIZE (uncompressed): 850 K
PACKAGE DESCRIPTION:
lsof: lsof (list open files)
lsof:
lsof: Lsof is a Unix-specific tool. Its name stands for "LiSt Open Files",
lsof: and it does just that. It lists information about files that are open
lsof: by the processes running on the system.
lsof:
lsof: Victor A. Abell of Purdue University is the developer of lsof.
lsof:
PACKAGE NAME: lsscsi-0.19-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 29 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
lsscsi: lsscsi (list SCSI devices or hosts, and their attributes)
lsscsi:
lsscsi: Uses information in sysfs to list scsi devices (or hosts) currently
lsscsi: attached to the system. Options can be used to control the amount
lsscsi: and form of information provided for each device.
lsscsi:
lsscsi: lsscsi was written by Doug Gilbert.
lsscsi:
PACKAGE NAME: luit-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
luit: luit
luit:
luit: luit is part of X11.
luit:
luit: For more information about the X.Org Foundation (the providers of the
luit: X.Org implementation of the X Window System), see their website:
luit:
luit:
http://www.x.org
luit:
PACKAGE NAME: lvm2-2.02.33-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 829 K
PACKAGE SIZE (uncompressed): 1910 K
PACKAGE DESCRIPTION:
lvm2: lvm2 (Logical Volume Manager version 2)
lvm2:
lvm2: Heinz Mauelshagen's LVM (Logical Volume Manager) for Linux.
lvm2: LVM adds an additional layer between the physical peripherals and the
lvm2: low-level I/O interface to get a logical view of disks. This allows
lvm2: the concatenation of several disks (so-called physical volumes or PVs)
lvm2: to form a storage pool (so-called Volume Group or VG) with allocation
lvm2: units called physical extents (called PE). With LVM, you can extend,
lvm2: resize, or relocate storage dynamically.
lvm2:
PACKAGE NAME: lynx-2.8.6rel.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 2042 K
PACKAGE SIZE (uncompressed): 4760 K
PACKAGE DESCRIPTION:
lynx: Lynx (text mode browser)
lynx:
lynx: Lynx is a distributed hypertext browser with full World Wide Web
lynx: capabilities. Lynx can be used to access information on the World
lynx: Wide Web, or to build information systems intended primarily for local
lynx: access. For example, Lynx has been used to build several Campus Wide
lynx: Information Systems (CWIS).
lynx:
lynx: Lynx's authors include Lou Montulli, Garrett Blythe, Craig Lavender,
lynx: Michael Grobe, and Charles Rezac.
lynx:
PACKAGE NAME: lzo-2.02-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 87 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
lzo: lzo (LZO Compression Library)
lzo:
lzo: LZO is a portable lossless data compression library written in ANSI C.
lzo: It offers pretty fast compression and very fast decompression.
lzo:
lzo: Homepage:
http://www.oberhumer.com/opensource/lzo/
lzo:
PACKAGE NAME: m17n-lib-1.5.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3161 K
PACKAGE SIZE (uncompressed): 13390 K
PACKAGE DESCRIPTION:
m17n-lib: m17n-lib (application multilingualization library)
m17n-lib:
m17n-lib: M17n is an abbreviation of Multilingualization. The m17n library
m17n-lib: implements multilingualization for many applications. The m17n
m17n-lib: library supports functions to handle M-texts. This package also
m17n-lib: contains the m17n database.
m17n-lib:
m17n-lib: m17n-lib home:
http://m17n.org/
m17n-lib:
PACKAGE NAME: m4-1.4.11-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 189 K
PACKAGE SIZE (uncompressed): 380 K
PACKAGE DESCRIPTION:
m4: m4 (an implementation of the UNIX macro processor)
m4:
m4: This is GNU m4, a program which copies its input to the output,
m4: expanding macros as it goes. m4 has built-in functions for including
m4: named files, running commands, doing integer arithmetic, manipulating
m4: text in various ways, recursion, etc... Macros can also be user-
m4: defined, and can take any number of arguments.
m4:
m4: GNU 'm4' was originally written by Rene Seindal, from Denmark.
m4:
PACKAGE NAME: madplay-0.15.2b-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
madplay: madplay (MPEG audio decoder and player)
madplay:
madplay: madplay is a command-line MPEG audio decoder and player based on the
madplay: MAD library (libmad). For details about MAD, see the libmad package
madplay: distributed separately.
madplay:
madplay: madplay was written by Robert Leslie.
madplay:
PACKAGE NAME: mailx-12.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 231 K
PACKAGE SIZE (uncompressed): 470 K
PACKAGE DESCRIPTION:
mailx: mailx (a simple mail client)
mailx:
mailx: Mailx is derived from Berkeley Mail and is intended provide the
mailx: functionality of the POSIX mailx command with additional support
mailx: for MIME, IMAP, POP3, SMTP, and S/MIME. It provides enhanced
mailx: features for interactive use, such as caching and disconnected
mailx: operation for IMAP, message threading, scoring, and filtering.
mailx: It is also usable as a mail batch language, both for sending
mailx: and receiving mail.
mailx:
mailx: The maintainer and primary developer of mailx is Gunnar Ritter.
PACKAGE NAME: make-3.81-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 492 K
PACKAGE SIZE (uncompressed): 1190 K
PACKAGE DESCRIPTION:
make: make (GNU make utility to maintain groups of programs)
make:
make: This is the GNU implementation of make, which was written by Richard
make: Stallman and Roland McGrath. The purpose of the make utility is to
make: determine automatically which pieces of a large program need to be
make: recompiled, and issue the commands to recompile them.
make:
make: This is needed to compile just about any major C program, including
make: the Linux kernel.
make:
PACKAGE NAME: makedepend-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
makedepend: makedepend
makedepend:
makedepend: makedepend is part of X11.
makedepend:
makedepend: For more information about the X.Org Foundation (the providers of the
makedepend: X.Org implementation of the X Window System), see their website:
makedepend:
makedepend:
http://www.x.org
makedepend:
PACKAGE NAME: man-1.6f-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 222 K
PACKAGE SIZE (uncompressed): 500 K
PACKAGE DESCRIPTION:
man: man (format and display the on-line manual pages)
man:
man: The man package is a collection of tools used for searching and
man: reading the online system documentation. In fact, on most UNIX-like
man: operating systems it is the primary means of finding out how programs
man: on the system work. For example, 'man man' will display the
man: documentation for man itself.
man:
man: Man requires the groff text processing package.
man:
PACKAGE NAME: man-pages-2.79-noarch-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 2222 K
PACKAGE SIZE (uncompressed): 4710 K
PACKAGE DESCRIPTION:
man-pages: man-pages (system documentation)
man-pages:
man-pages: Man pages are online documentation for Linux. This package includes
man-pages: many section 1, 2, 3, 4, 5, 7, and 8 man pages for Linux.
man-pages:
man-pages: The man-pages distribution is maintained by Andries E. Brouwer with
man-pages: the help of more writers, editors, and other contributors than we can
man-pages: name here.
man-pages:
PACKAGE NAME: mc-4.6.1_20070309-i486-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 1992 K
PACKAGE SIZE (uncompressed): 5110 K
PACKAGE DESCRIPTION:
mc: mc (Midnight Commander file manager)
mc:
mc: The Midnight Commander is a Norton Commander clone, a program that
mc: manipulates and manages files and directories. Useful, fast, and has
mc: color displays on the Linux console. Mouse support is provided
mc: through the gpm mouse server. This is a lightweight compilation of
mc: mc for use on the text console or in an xterm.
mc:
mc: mc was written by Miguel de Icaza and Mauricio Plaza.
mc:
PACKAGE NAME: mcabber-0.9.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 248 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
mcabber: mcabber (Jabber console client)
mcabber:
mcabber: mcabber is a small Jabber console client for Linux, maintained by
mcabber: Mikael Berthe. Mcabber includes features such as SSL support,
mcabber: multi-user chat (MUC), history logging, commands completion, and
mcabber: external actions triggers.
mcabber:
mcabber: mcabber project home is:
http://www.lilotux.net/~mikael/mcabber/
mcabber:
PACKAGE NAME: mdadm-2.6.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 401 K
PACKAGE SIZE (uncompressed): 850 K
PACKAGE DESCRIPTION:
mdadm: mdadm (manage RAID arrays)
mdadm:
mdadm: mdadm is a utility program for creating, managing, and monitoring
mdadm: Linux MD (Software RAID) devices. Unlike the older raidtools
mdadm: package, mdadm is a single program (which should make it easier to
mdadm: use).
mdadm:
mdadm: mdadm was written by Neil Brown. Development of mdadm is sponsored
mdadm: by CSE@UNSW (The School of Computer Science and Engineering at
mdadm: The University of New South Wales).
mdadm:
PACKAGE NAME: mercurial-1.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 878 K
PACKAGE SIZE (uncompressed): 2910 K
PACKAGE DESCRIPTION:
mercurial: mercurial (a distributed source management system)
mercurial:
mercurial: Mercurial is a cross-platform, distributed source management tool for
mercurial: software developers. It is written in Python, with a binary diff
mercurial: implementation written in C. Its major features include high-
mercurial: performance; serverless, fully distributed collaborative development;
mercurial: robust handling of both plain text and binary files; advanced
mercurial: branching and merging capabilities; and full source code available
mercurial: under the terms of the LGPL.
mercurial:
mercurial: Mercurial was written by Matt Mackall and other contributors.
PACKAGE NAME: mesa-7.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12415 K
PACKAGE SIZE (uncompressed): 36780 K
PACKAGE DESCRIPTION:
mesa: mesa (a 3-D graphics library)
mesa:
mesa: Mesa is a 3-D graphics library with an API very similar to that of
mesa: another well-known 3-D graphics library. :-) The Mesa libraries are
mesa: used by X to provide both software and hardware accelerated graphics.
mesa:
mesa: Mesa was written by Brian Paul.
mesa:
PACKAGE NAME: metamail-2.7-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 132 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
metamail: metamail (MIME extensions for mail)
metamail:
metamail: Metamail is an implementation of MIME, the Multipurpose Internet
metamail: Mail Extensions, a proposed standard for multimedia mail on the
metamail: Internet. Metamail implements MIME, and also implements extensibility
metamail: and configuration via the "mailcap" mechanism described in an
metamail: informational RFC that is a companion to the MIME document.
metamail:
PACKAGE NAME: mhash-0.9.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 291 K
PACKAGE SIZE (uncompressed): 680 K
PACKAGE DESCRIPTION:
mhash: mhash (Thread-safe hash library)
mhash:
mhash: mhash is a thread-safe hash library, implemented in C, and provides a
mhash: uniform interface to a large number of hash algorithms (MD5, SHA-1,
mhash: HAVAL, RIPEMD128, RIPEMD160, TIGER, GOST). These algorithms can be
mhash: used to compute checksums, message digests, and other signatures.
mhash: The HMAC support implements the basics for message authentication,
mhash: following RFC 2104.
mhash:
PACKAGE NAME: minicom-2.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 356 K
PACKAGE SIZE (uncompressed): 930 K
PACKAGE DESCRIPTION:
minicom: minicom (communications package)
minicom:
minicom: Minicom - a full featured menu-driven communications package similar
minicom: to the DOS program 'Telix'. Also includes sz/rz - utilities used to
minicom: upload and download files using the Zmodem protocol.
minicom:
PACKAGE NAME: mkcomposecache-1.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
mkcomposecache: mkcomposecache
mkcomposecache:
mkcomposecache: mkcomposecache is part of X11.
mkcomposecache:
mkcomposecache: For more information about the X.Org Foundation (the providers of the
mkcomposecache: X.Org implementation of the X Window System), see their website:
mkcomposecache:
mkcomposecache:
http://www.x.org
mkcomposecache:
PACKAGE NAME: mkfontdir-1.0.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
mkfontdir: mkfontdir
mkfontdir:
mkfontdir: mkfontdir is part of X11.
mkfontdir:
mkfontdir: For more information about the X.Org Foundation (the providers of the
mkfontdir: X.Org implementation of the X Window System), see their website:
mkfontdir:
mkfontdir:
http://www.x.org
mkfontdir:
PACKAGE NAME: mkfontscale-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
mkfontscale: mkfontscale
mkfontscale:
mkfontscale: mkfontscale is part of X11.
mkfontscale:
mkfontscale: For more information about the X.Org Foundation (the providers of the
mkfontscale: X.Org implementation of the X Window System), see their website:
mkfontscale:
mkfontscale:
http://www.x.org
mkfontscale:
PACKAGE NAME: mkinitrd-1.3.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 826 K
PACKAGE SIZE (uncompressed): 880 K
PACKAGE DESCRIPTION:
mkinitrd: mkinitrd (make an initial ramdisk)
mkinitrd:
mkinitrd: mkinitrd is a script to create an initial ramdisk that is loaded at
mkinitrd: the same time as the kernel. The initial ramdisk may be responsible
mkinitrd: for loading kernel modules (such a filesystem or SCSI controller
mkinitrd: module) that are needed to mount the root filesystem.
mkinitrd:
mkinitrd: The "initrd" is implemented as an initramfs. See the kernel
mkinitrd: documentation for more information on this, if you are interested.
mkinitrd:
PACKAGE NAME: mm-1.4.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 37 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
mm: mm (Shared Memory Allocation library)
mm:
mm: OSSP mm is a 2-layer abstraction library which simplifies the usage of
mm: shared memory between forked processes. On the first layer it hides
mm: all platform dependent implementation details (allocation and locking)
mm: when dealing with shared memory segments and on the second layer it
mm: provides a high-level malloc(3)-style API to work with data inside
mm: those shared memory segments. Apache, PHP, and other projects use mm.
mm:
mm: The mm library was written by Ralf S. Engelschall.
mm:
PACKAGE NAME: module-init-tools-3.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 409 K
PACKAGE SIZE (uncompressed): 870 K
PACKAGE DESCRIPTION:
module-init-tools: module-init-tools (kernel module utilities)
module-init-tools:
module-init-tools: Utilities to load and unload kernel modules. These are used on Linux
module-init-tools: to load extra drivers or other features into the running kernel.
module-init-tools:
PACKAGE NAME: most-4.10.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 41 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
most: most (another pager, like 'more' and 'less')
most:
most: most is a paging program that displays, one windowful at a time, the
most: contents of a file on a terminal. Unlike other well-known paging
most: programs, most supports multiple windows and can scroll left and
most: right. Why settle for less?
most:
most: 'most' was written by John E. Davis.
most:
PACKAGE NAME: mozilla-firefox-2.0.0.14-i686-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 9508 K
PACKAGE SIZE (uncompressed): 24670 K
PACKAGE DESCRIPTION:
mozilla-firefox: mozilla-firefox (Mozilla Firefox Web browser)
mozilla-firefox:
mozilla-firefox: This project is a redesign of the Mozilla browser component written
mozilla-firefox: using the XUL user interface language. Firefox empowers you to
mozilla-firefox: browse faster, more safely and more efficiently than with any other
mozilla-firefox: browser.
mozilla-firefox:
mozilla-firefox: Visit the Mozilla Firefox project online:
mozilla-firefox:
http://www.mozilla.org/projects/firefox/
mozilla-firefox:
PACKAGE NAME: mozilla-thunderbird-2.0.0.12-i686-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 11218 K
PACKAGE SIZE (uncompressed): 30640 K
PACKAGE DESCRIPTION:
mozilla-thunderbird: mozilla-thunderbird (Mozilla Thunderbird mail application)
mozilla-thunderbird:
mozilla-thunderbird: Mozilla Thunderbird is a redesign of the Mozilla mail component
mozilla-thunderbird: written using the XUL user interface language. Thunderbird makes
mozilla-thunderbird: emailing safer, faster, and easier than ever before with the
mozilla-thunderbird: industry's best implementations of features such as intelligent spam
mozilla-thunderbird: filters, built-in RSS reader, quick search, and much more.
mozilla-thunderbird:
mozilla-thunderbird: Visit the Mozilla Thunderbird project online:
mozilla-thunderbird:
http://www.mozilla.org/projects/thunderbird/
mozilla-thunderbird:
PACKAGE NAME: mpfr-2.3.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 348 K
PACKAGE SIZE (uncompressed): 930 K
PACKAGE DESCRIPTION:
mpfr: mpfr (Multiple-Precision Floating-Point Reliable Library)
mpfr:
mpfr: The MPFR library is a C library for multiple-precision floating-point
mpfr: computations with exact rounding (also called correct rounding).
mpfr: It is based on the GMP multiple-precision library.
mpfr: The main goal of MPFR is to provide a library for multiple-precision
mpfr: floating-point computation which is both efficient and has
mpfr: well-defined semantics. It copies the good ideas from the
mpfr: ANSI/IEEE-754 standard for double-precision floating-point arithmetic
mpfr: (53-bit mantissa).
mpfr:
PACKAGE NAME: mpg321-0.2.10-i486-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 36 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
mpg321: mpg321 (a command-line mp3 player)
mpg321:
mpg321: mpg321 is a free command-line mp3 player, which uses the mad audio
mpg321: decoding library. mpg321 is written to be a drop-in replacement for
mpg321: the mpg123 player for front-ends such as gqmpeg and programs which use
mpg321: mpg123 to decode mp3 files (like gtoaster, and other CD-recording
mpg321: software).
mpg321:
mpg321: mpg321 requires libao.so from the oggutils package.
mpg321:
PACKAGE NAME: mt-st-0.9b-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
mt-st: mt-st (controls magnetic tape drive operation)
mt-st:
mt-st: This mt originates from BSD NET-2. Some Linux SCSI tape-specific
mt-st: ioctls have been added to the original source and the man page has
mt-st: been updated. Although this mt program is tailored for SCSI tape, it
mt-st: can also be used with the QIC-02 driver and hopefully with other Linux
mt-st: tape drivers using the same ioctls (some of the commands may not work
mt-st: with all drivers).
mt-st:
PACKAGE NAME: mtr-0.72-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 55 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
mtr: mtr (a network diagnostic tool)
mtr:
mtr: mtr combines the functionality of the 'traceroute' and 'ping' programs
mtr: in a single network diagnostic tool.
mtr:
mtr: Matt Kimball wrote most of mtr, and mtr is currently maintained by
mtr: Roger Wolff.
mtr:
mtr: mtr has a home page:
http://www.bitwizard.nl/mtr/
mtr:
PACKAGE NAME: mtx-1.3.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
mtx: mtx (Controls tape autochangers)
mtx:
mtx: The MTX program controls the robotic mechanism in autoloaders and
mtx: tape libraries such as the HP SureStore DAT 40x6, Exabyte EZ-17, and
mtx: Exabyte 220.
mtx:
mtx: This program is also reported to work with a variety of other tape
mtx: libraries and autochangers from Tandberg/Overland, Breece Hill, HP,
mtx: Seagate, Dell and Quantum.
mtx:
PACKAGE NAME: mutt-1.4.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1099 K
PACKAGE SIZE (uncompressed): 2860 K
PACKAGE DESCRIPTION:
mutt: The mutt mail client.
mutt:
mutt: Mutt is a small but very powerful text-based MIME mail client. Mutt
mutt: is highly configurable, and is well suited to the mail power user with
mutt: advanced features like key bindings, keyboard macros, mail threading,
mutt: regular expression searches and a powerful pattern matching language
mutt: for selecting groups of messages.
mutt:
PACKAGE NAME: mysql-5.0.51b-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 16653 K
PACKAGE SIZE (uncompressed): 33580 K
PACKAGE DESCRIPTION:
mysql: mysql (SQL-based relational database server)
mysql:
mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL
mysql: (Structured Query Language) database server. It comes with a nice API
mysql: which makes it easy to integrate into other applications.
mysql:
mysql: The home page for MySQL is
http://www.mysql.com/
mysql:
PACKAGE NAME: nano-2.0.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 454 K
PACKAGE SIZE (uncompressed): 1270 K
PACKAGE DESCRIPTION:
nano: nano (Nano's ANOther editor, an enhanced free Pico clone)
nano:
nano: nano is a small, free, and friendly editor from the GNU project. It
nano: aims to copy Pico's look and feel while providing additional (or
nano: disabled by default) features that are missing from Pico, such as
nano: "search and replace" or "go to line and column number".
nano:
nano: Chris Allegretta is Nano's author.
nano:
PACKAGE NAME: nasm-0.98.39-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 343 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
nasm: nasm (NASM assembler)
nasm:
nasm: NASM is the Netwide Assembler, a free portable assembler for the Intel
nasm: 80x86 microprocessor series, using primarily the traditional Intel
nasm: instruction mnemonics and syntax.
nasm:
nasm: NASM was written by Simon Tatham and Julian Hall.
nasm:
PACKAGE NAME: nc-1.10-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 56 K
PACKAGE SIZE (uncompressed): 160 K
PACKAGE DESCRIPTION:
nc: nc (Netcat network utility)
nc:
nc: Netcat, or "nc" as the actual program is named, is a simple utility
nc: which reads and writes data across network connections, using TCP or
nc: UDP protocol. It is designed to be a reliable "back-end" tool that
nc: can be used directly or easily driven by other programs and scripts.
nc: At the same time, it is a feature-rich network debugging and
nc: exploration tool, since it can create almost any kind of connection
nc: you would need and has several interesting built-in capabilities.
nc: Netcat was written by *Hobbit* <
[email protected]>, and is a product
nc: of Avian Research.
PACKAGE NAME: ncftp-3.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 469 K
PACKAGE SIZE (uncompressed): 1020 K
PACKAGE DESCRIPTION:
ncftp: ncftp (ftp client)
ncftp:
ncftp: NcFTP is a user interface to the Internet standard File Transfer
ncftp: Protocol. This program allows a user to transfer files to and from a
ncftp: remote network site, and offers additional features that are not found
ncftp: in the standard interface for ftp.
ncftp:
PACKAGE NAME: ncompress-4.2.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
ncompress: ncompress (the classic *nix compression utility)
ncompress:
ncompress: Compress reduces the size of the named files using adaptive Lempel-Ziv
ncompress: coding. Whenever possible, each file is replaced by one with the
ncompress: extension .Z, while keeping the same ownership modes, access and
ncompress: modification times. If no files are specified, the standard input is
ncompress: compressed to the standard output. Compressed files can be restored
ncompress: to their original form using uncompress or zcat.
ncompress:
PACKAGE NAME: ncurses-5.6-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1952 K
PACKAGE SIZE (uncompressed): 7070 K
PACKAGE DESCRIPTION:
ncurses: ncurses (CRT screen handling and optimization package)
ncurses:
ncurses: The ncurses (new curses) library is a free software emulation of
ncurses: curses in System V Release 4.0, and more. It uses terminfo format,
ncurses: supports pads and color and multiple highlights and forms characters
ncurses: and function-key mapping, and has all the other SYSV-curses
ncurses: enhancements over BSD curses.
ncurses:
PACKAGE NAME: neon-0.26.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 187 K
PACKAGE SIZE (uncompressed): 710 K
PACKAGE DESCRIPTION:
neon: neon (HTTP and WebDAV client library)
neon:
neon: neon is an HTTP and WebDAV client library, with a C language API.
neon: Bindings for other languages may also be available, see the web site
neon: for more details:
http://www.webdav.org/neon/
neon:
neon: The neon library is used by projects such as subversion.
neon:
PACKAGE NAME: net-snmp-5.4-i486-6.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 2191 K
PACKAGE SIZE (uncompressed): 7070 K
PACKAGE DESCRIPTION:
net-snmp: net-snmp (Simple Network Management Protocol tools)
net-snmp:
net-snmp: Various tools relating to the Simple Network Management Protocol:
net-snmp:
net-snmp: An extensible agent
net-snmp: An SNMP library
net-snmp: Tools to request or set information from SNMP agents
net-snmp: Tools to generate and handle SNMP traps
net-snmp: A version of the unix 'netstat' command using SNMP
net-snmp: A graphical Perl/Tk/SNMP based mib browser
net-snmp:
PACKAGE NAME: net-tools-1.60-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 164 K
PACKAGE SIZE (uncompressed): 400 K
PACKAGE DESCRIPTION:
net-tools: net-tools (base Linux networking utilities)
net-tools:
net-tools: This is the core collection of tools such as "ifconfig" and "route"
net-tools: used to configure networking on Linux. You won't be able to do much
net-tools: networking without this package and the network-scripts.
net-tools:
net-tools: The net-tools package was maintained for many years by Phil Blundell
net-tools: and Bernd Eckenfels.
net-tools:
PACKAGE NAME: netatalk-2.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 821 K
PACKAGE SIZE (uncompressed): 2130 K
PACKAGE DESCRIPTION:
netatalk: netatalk (Appletalk file and print server)
netatalk:
netatalk: Netatalk is an Appletalk file and print server for Linux. Using
netatalk: Netatalk, Macintosh computers on your local network can mount Linux
netatalk: volumes as if they were standard Appletalk network drives, and can
netatalk: print to the Linux box's printer as if it were a network printer
netatalk: supporting PostScript.
netatalk:
netatalk: Netatalk was originally written by the Research Systems Unix Group at
netatalk: The University of Michigan, and is maintained by the Netatalk Team.
netatalk:
PACKAGE NAME: netdate-bsd4-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
netdate: netdate (simple network time utility)
netdate:
netdate: Netdate takes a list of names of Internet hosts as arguments, selects
netdate: the one which supplies the best time, and sets the system time
netdate: accordingly. The invoker must be the super-user for the time to be
netdate: set. Protocol names (either udp or tcp) may be interspersed with the
netdate: host names, and determine the protocol which will be used to connect
netdate: to the hosts whose names follow, up to the next protocol name or the
netdate: end of the arguments. The default protocol is udp.
netdate:
netdate: These days, "ntpdate" is probably a better choice.
PACKAGE NAME: netkit-bootparamd-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
netkit-bootparamd: netkit-bootparamd (boot parameter server)
netkit-bootparamd:
netkit-bootparamd: This package provides rpc.bootparamd and callbootd, programs used to
netkit-bootparamd: provide information to diskless clients so they can boot. It is
netkit-bootparamd: used primarily to allow a Linux server to boot a Sun machine using
netkit-bootparamd: SunOS bootparam.
netkit-bootparamd:
netkit-bootparamd: netkit-bootparamd was written by Klas Heggemann.
netkit-bootparamd:
PACKAGE NAME: netkit-ftp-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 44 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
netkit-ftp: netkit-ftp (the old BSD FTP client)
netkit-ftp:
netkit-ftp: Ftp is the user interface to the Internet standard File Transfer
netkit-ftp: Protocol. The program allows a user to transfer files to and from a
netkit-ftp: remote network site.
netkit-ftp:
netkit-ftp: This is a program of mostly historical value. For a more powerful
netkit-ftp: command-line FTP client, look at something like lftp.
netkit-ftp:
PACKAGE NAME: netkit-ntalk-0.17-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 26 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
netkit-ntalk: netkit-ntalk (talk client and talkd daemon)
netkit-ntalk:
netkit-ntalk: talk and talkd are the BSD communication client server system for
netkit-ntalk: the command line. "talk" is the client that asks another user to
netkit-ntalk: respond; and "in.talkd" is the server that notifies a user that
netkit-ntalk: someone else wants to initiate a conversation.
netkit-ntalk:
netkit-ntalk: The talk command appeared in 4.2BSD.
netkit-ntalk:
PACKAGE NAME: netkit-routed-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 25 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
netkit-routed: netkit-routed (dynamic network routing daemon)
netkit-routed:
netkit-routed: Routed is invoked at boot time to manage the network routing tables.
netkit-routed: The routing daemon uses a variant of the Xerox NS Routing Information
netkit-routed: Protocol in maintaining up to date kernel routing table entries.
netkit-routed: It used a generalized protocol capable of use with multiple address
netkit-routed: types, but is currently used only for Internet routing within a
netkit-routed: cluster of networks.
netkit-routed:
netkit-routed: Fair warning: routed is no longer maintained and may be insecure.
netkit-routed:
PACKAGE NAME: netkit-rsh-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 46 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
netkit-rsh: netket-rsh (the BSD rsh/rcp/rlogin clients and daemon)
netkit-rsh:
netkit-rsh: The old BSD rsh suite. Note that none of these programs provide
netkit-rsh: encryption or strong authentication of network connections. As such,
netkit-rsh: their use is discouraged. The "ssh" protocol and package is a
netkit-rsh: cryptographically secure replacement.
netkit-rsh:
PACKAGE NAME: netkit-rusers-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
netkit-rusers: netkit-rusers (show users logged in to machines on local network)
netkit-rusers:
netkit-rusers: The rusers command produces output similar to who, but for the list
netkit-rusers: of hosts or all machines on the local network. For each host
netkit-rusers: responding to the rusers query, the hostname with the names of the
netkit-rusers: users currently logged on is printed on each line. The rusers
netkit-rusers: command will wait for one minute to catch late responders.
netkit-rusers:
netkit-rusers: Portmap and rpc.rusersd must be running on remote machines. Should
netkit-rusers: probably be considered insecure (or at least ill-advised) on public
netkit-rusers: networks.
PACKAGE NAME: netkit-rwall-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
netkit-rwall: netkit-rwall (send a message to all users)
netkit-rwall:
netkit-rwall: The rwall command sends a message to the users logged into the
netkit-rwall: specified host. The message to be sent can be typed in and
netkit-rwall: terminated with EOF or it can be in a file.
netkit-rwall:
netkit-rwall: Run the rpc.rwalld daemon with caution. It may be insecure.
netkit-rwall:
netkit-rwall: The rwall command appeared in SunOS.
netkit-rwall:
PACKAGE NAME: netkit-rwho-0.17-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
netkit-rwho: netkit-rwho (who is logged in on local machines)
netkit-rwho:
netkit-rwho: The rwho command produces output similar to who, but for all machines
netkit-rwho: on the local network. If no report has been received from a machine
netkit-rwho: for 11 minutes then rwho assumes the machine is down, and does not
netkit-rwho: report users last known to be logged into that machine. If a users
netkit-rwho: hasn't typed to the system for a minute or more, then rwho reports
netkit-rwho: this idle time. If a user hasn't typed to the system for an hour or
netkit-rwho: more, then the user will be omitted from the output of rwho unless
netkit-rwho: the -a flag is given.
netkit-rwho:
PACKAGE NAME: netkit-timed-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 32 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
netkit-timed: netkit-timed (time server daemon)
netkit-timed:
netkit-timed: This is an early BSD time server daemon. While ntpd is better for
netkit-timed: most purposes, this might be useful for secure networks or embedded
netkit-timed: systems in need of something more lightweight.
netkit-timed:
netkit-timed: The timed daemon appeared in 4.3BSD.
netkit-timed:
PACKAGE NAME: netpbm-10.35.22-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1952 K
PACKAGE SIZE (uncompressed): 5230 K
PACKAGE DESCRIPTION:
netpbm: netpbm (graphics conversion utilities)
netpbm:
netpbm: The netpbm package contains a library and tools for converting between
netpbm: many different graphics formats.
netpbm:
PACKAGE NAME: netpipes-4.2-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 75 K
PACKAGE SIZE (uncompressed): 210 K
PACKAGE DESCRIPTION:
netpipes: netpipes
netpipes:
netpipes: Robert Forsman's netpipes package makes TCP/IP streams usable in shell
netpipes: scripts. It can also simplify client/server code by allowing the
netpipes: programmer to skip all the tedious programming bits related to sockets
netpipes: and concentrate on writing a filter/service. Here's an example of
netpipes: what you can do with 'faucet' and 'hose', two netpipes commands:
netpipes:
netpipes: server$ faucet 3000 -out tar cf - .
netpipes: client$ hose server 3000 -in tar xvf -
netpipes:
PACKAGE NAME: netwatch-1.0a-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 110 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
netwatch: netwatch
netwatch:
netwatch: Netwatch allows a user (superuser) to monitor activity on the network.
netwatch: The monitor includes statistics on transmitted and received packets,
netwatch: bytes, protocol, and more.
netwatch:
PACKAGE NAME: network-scripts-12.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
network-scripts: network-scripts (Scripts to configure a network)
network-scripts:
network-scripts: These are the basic scripts and files used to define a network and
network-scripts: configure network interfaces on Linux. Most of the original
network-scripts: /etc files were written by Fred N. van Kempen, or borrowed from BSD.
network-scripts: The rc.inet1 and rc.inet2 scripts were mostly written by Patrick
network-scripts: Volkerding, with suggestions and fixes from hundreds of contributors
network-scripts: over the years.
network-scripts:
PACKAGE NAME: netwrite-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
netwrite: netwrite (in.writed daemon for accepting network "write")
netwrite:
netwrite: Writed implements a very simple protocol that allows a write(1)
netwrite: program on one host to connect up to one on another host, allowing
netwrite: communications across the network. Writed is meant to be run from
netwrite: inetd(8) listening for TCP requests on port 811. No attempt is made
netwrite: to determine the authenticity of users sending messages. This
netwrite: program should probably not be deployed on insecure networks.
netwrite:
PACKAGE NAME: newspost-2.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 43 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
newspost: newspost (binary posting utility)
newspost:
newspost: Newspost is a usenet binary autoposter. It will uuencode or yencode
newspost: files and post them to usenet newsgroups. In addition, it can
newspost: automatically generate and post .SFV checksum files and .PAR parity
newspost: files.
newspost:
newspost: Newspost was mostly written by Jim Faulkner, with some help from
newspost: William McBrine. Portions borrowed from cksfv by Bryan Call, and
newspost: parchive by Willem Monsuwe.
newspost:
PACKAGE NAME: nfs-utils-1.1.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 196 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
nfs-utils: nfs-utils (Network File System daemons and utilities)
nfs-utils:
nfs-utils: The nfs-utils package contains the necessary daemons and utilities to
nfs-utils: run an NFS server on Linux.
nfs-utils:
nfs-utils: You'll also need the portmap package to use NFS.
nfs-utils:
PACKAGE NAME: nmap-4.60-i486-3.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1867 K
PACKAGE SIZE (uncompressed): 6950 K
PACKAGE DESCRIPTION:
nmap: nmap (network scanner)
nmap:
nmap: Nmap ("Network Mapper") is an open source utility for network
nmap: exploration or security auditing. It was designed to rapidly scan
nmap: large networks, although it works fine against single hosts. Nmap
nmap: uses raw IP packets in novel ways to determine what hosts are
nmap: available on the network, what services (ports) they are offering,
nmap: what operating system (and OS version) they are running, what type of
nmap: packet filters/firewalls are in use, and dozens of other
nmap: characteristics. Nmap runs on most types of computers, and both
nmap: console and graphical versions are available.
PACKAGE NAME: nn-6.7.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 320 K
PACKAGE SIZE (uncompressed): 730 K
PACKAGE DESCRIPTION:
nn: nn (the NN newsreader)
nn:
nn: nn is an easy to use menu driven newsreader by Kim F. Storm.
nn:
nn: nn stands for "No News is good news", and the nn newsreader is
nn: designed to let you minimize the amount of time you spend reading news
nn: (or, more realistically, to let you to read even more newsgroups :-).
nn: This version of nn reads news from a news server via NNTP, and can
nn: make use of your NNTP server's NOV database.
nn:
PACKAGE NAME: normalize-0.7.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 74 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
normalize: normalize (adjusts volume levels of audio files)
normalize:
normalize: normalize is a tool for adjusting the volume of audio files to a
normalize: standard level. This is useful for things like creating mix CDs
normalize: from mp3 collections, where different recording levels on
normalize: different albums can cause the volume to vary greatly from song
normalize: to song. The package also contains an XMMS plugin.
normalize:
normalize: Chris Vaill is the author of normalize.
normalize:
PACKAGE NAME: ntfs-3g-1.2310-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 169 K
PACKAGE SIZE (uncompressed): 500 K
PACKAGE DESCRIPTION:
ntfs-3g: ntfs-3g (NTFS read-write filesystem driver)
ntfs-3g:
ntfs-3g: The NTFS-3G driver is an open source, freely available NTFS driver
ntfs-3g: for Linux with read and write support. It provides safe and fast
ntfs-3g: handling of the Windows XP, Windows Server 2003, Windows 2000 and
ntfs-3g: Windows Vista file systems. Most POSIX file system operations are
ntfs-3g: supported, with the exception of full file ownership and access
ntfs-3g: rights support.
ntfs-3g:
ntfs-3g: Homepage for the ntfs-3g project:
http://www.ntfs-3g.org
ntfs-3g:
PACKAGE NAME: ntfsprogs-2.0.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 360 K
PACKAGE SIZE (uncompressed): 1000 K
PACKAGE DESCRIPTION:
ntfsprogs: ntfsprogs (utilities for working with NTFS volumes)
ntfsprogs:
ntfsprogs: The ntfsprogs includes utilities for doing all required tasks to NTFS
ntfsprogs: partitions. In general, just run a utility without any command line
ntfsprogs: options to display the version number and usage syntax. The following
ntfsprogs: utilities are implemented (so far): ntfsfix, mkntfs, ntfslabel,
ntfsprogs: ntfsundelete, ntfsresize, ntfsclone, ntfscluster, ntfsinfo, ntfsls,
ntfsprogs: ntfscat, ntfscp, and ntfsmount.
ntfsprogs:
ntfsprogs: The Linux-NTFS home page is:
http://www.linux-ntfs.org/
ntfsprogs:
PACKAGE NAME: ntp-4.2.4p0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1449 K
PACKAGE SIZE (uncompressed): 3100 K
PACKAGE DESCRIPTION:
ntp: ntp (Network Time Protocol daemon)
ntp:
ntp: The Network Time Protocol (NTP) is used to synchronize the time of a
ntp: computer client or server to another server or reference time source,
ntp: such as a radio or satellite receiver or modem. It provides client
ntp: accuracies typically within a millisecond on LANs and up to a few tens
ntp: of milliseconds on WANs relative to a primary server synchronized to
ntp: Coordinated Universal Time (UTC) via a Global Positioning Service
ntp: (GPS) receiver, for example.
ntp:
PACKAGE NAME: obexftp-0.21-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 82 K
PACKAGE SIZE (uncompressed): 260 K
PACKAGE DESCRIPTION:
obexftp: obexftp (Access devices via ObexFTP, such as mobile phones)
obexftp:
obexftp: This package contains some command line tools and the ObexFTP
obexftp: library. Using OpenOBEX it enables you to transfer data via IrDA,
obexftp: Bluetooth, as well as some custom (Siemens, Ericsson) serial port
obexftp: protocols.
obexftp:
obexftp: ObexFTP was written by Christian W. Zuckschwerdt.
obexftp:
obexftp: The project site is:
http://triq.net/obexftp.html
obexftp:
PACKAGE NAME: oclock-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
oclock: oclock
oclock:
oclock: oclock is part of X11.
oclock:
oclock: For more information about the X.Org Foundation (the providers of the
oclock: X.Org implementation of the X Window System), see their website:
oclock:
oclock:
http://www.x.org
oclock:
PACKAGE NAME: openldap-client-2.3.38-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 481 K
PACKAGE SIZE (uncompressed): 1110 K
PACKAGE DESCRIPTION:
openldap-client: openldap-client (OpenLDAP client programs)
openldap-client:
openldap-client: OpenLDAP is an open source implementation of the Lightweight
openldap-client: Directory Access Protocol. LDAP is a alternative to the X.500
openldap-client: Directory Access Protocol (DAP). It uses the TCP/IP stack versus
openldap-client: the overly complex OSI stack.
openldap-client:
openldap-client: LDAP is often used to provide authentication (such as for email).
openldap-client:
openldap-client: The OpenLDAP homepage is
http://www.openldap.org/
openldap-client:
PACKAGE NAME: openobex-1.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 57 K
PACKAGE SIZE (uncompressed): 190 K
PACKAGE DESCRIPTION:
openobex: openobex (Object Exchange protocol library)
openobex:
openobex: OpenOBEX is a free open source implementation of the Object Exchange
openobex: (OBEX) protocol. OBEX is a session protocol and can best be
openobex: described as a binary HTTP protocol. OBEX is optimised for ad-hoc
openobex: wireless links and can be used to exchange all kinds of objects like
openobex: files, pictures, calendar entries (vCal) and business cards (vCard).
openobex:
openobex: Visit the project here:
http://www.openobex.org
openobex:
PACKAGE NAME: openssh-5.0p1-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 809 K
PACKAGE SIZE (uncompressed): 1900 K
PACKAGE DESCRIPTION:
openssh: openssh (Secure Shell daemon and clients)
openssh:
openssh: ssh (Secure Shell) is a program for logging into a remote machine and
openssh: for executing commands on a remote machine. It is intended to replace
openssh: rlogin and rsh, and provide secure encrypted communications between
openssh: two untrusted hosts over an insecure network. sshd (SSH Daemon) is
openssh: the daemon program for ssh. OpenSSH is based on the last free version
openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron
openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and
openssh: Dug Song. It has a homepage at
http://www.openssh.com/
openssh:
PACKAGE NAME: openssl-0.9.8g-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 3376 K
PACKAGE SIZE (uncompressed): 9240 K
PACKAGE DESCRIPTION:
openssl: openssl (Secure Sockets Layer toolkit)
openssl:
openssl: The OpenSSL certificate management tool and the shared libraries that
openssl: provide various encryption and decryption algorithms and protocols.
openssl:
openssl: This product includes software developed by the OpenSSL Project for
openssl: use in the OpenSSL Toolkit (
http://www.openssl.org). This product
openssl: includes cryptographic software written by Eric Young
openssl: (
[email protected]). This product includes software written by Tim
openssl: Hudson (
[email protected]).
openssl:
PACKAGE NAME: openssl-solibs-0.9.8g-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 825 K
PACKAGE SIZE (uncompressed): 2080 K
PACKAGE DESCRIPTION:
openssl-solibs: openssl-solibs (OpenSSL shared libraries)
openssl-solibs:
openssl-solibs: These shared libraries provide encryption routines required by
openssl-solibs: programs such as openssh. They are also used by KDE's Konqueror web
openssl-solibs: browser to provide secure web connections.
openssl-solibs:
openssl-solibs: This product includes software developed by the OpenSSL Project for
openssl-solibs: use in the OpenSSL Toolkit (
http://www.openssl.org). This product
openssl-solibs: includes cryptographic software written by Eric Young
openssl-solibs: (
[email protected]). This product includes software written by Tim
openssl-solibs: Hudson (
[email protected]).
PACKAGE NAME: openvpn-2.0.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 302 K
PACKAGE SIZE (uncompressed): 760 K
PACKAGE DESCRIPTION:
openvpn: openvpn (secure IP tunnel daemon)
openvpn:
openvpn: OpenVPN is a full-featured SSL VPN which can accomodate a wide range
openvpn: of configurations, including remote access, site-to-site VPNs, WiFi
openvpn: security, and enterprise-scale remote access with load balancing,
openvpn: failover, and fine-grained access-controls.
openvpn:
openvpn: OpenVPN's home on the net is:
http://openvpn.net
openvpn:
PACKAGE NAME: oprofile-0.9.2-i486-5.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 964 K
PACKAGE SIZE (uncompressed): 2970 K
PACKAGE DESCRIPTION:
oprofile: oprofile (system profiling tool)
oprofile:
oprofile: OProfile is a profiling system for Linux. Profiling runs
oprofile: transparently in the background and profile data can be collected
oprofile: at any time. OProfile makes use of the hardware performance
oprofile: counters provided on Intel, AMD, and other processors, and uses a
oprofile: timer-interrupt based mechanism on CPUs without counters.
oprofile: OProfile can profile the whole system in high detail.
oprofile:
PACKAGE NAME: p2c-1.21alpha2-i486-3.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 312 K
PACKAGE SIZE (uncompressed): 790 K
PACKAGE DESCRIPTION:
p2c: p2c (Pascal to C translator)
p2c:
p2c: P2c is a tool for translating Pascal programs into C. The input
p2c: consists of a set of source files in any of the following Pascal
p2c: dialects: HP Pascal, Turbo/UCSD Pascal, DEC VAX Pascal, Oregon
p2c: Software Pascal/2, Macintosh Programmer's Workshop Pascal,
p2c: Sun/Berkeley Pascal, Texas Instruments Pascal, Apollo Domain Pascal.
p2c: Modula-2 syntax is also supported. Output is a set of .c and .h
p2c: files that comprise an equivalent program in any of several dialects
p2c: of C.
p2c:
PACKAGE NAME: pan-0.132-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1044 K
PACKAGE SIZE (uncompressed): 3000 K
PACKAGE DESCRIPTION:
pan: pan
pan:
pan: This is PAN, a powerful and user-friendly USENET newsreader based on
pan: GTK+2. Pan is the only Unix newsreader to score 100% on the Good
pan: Net-Keeping Seal of Approval newsreader evaluations.
pan:
PACKAGE NAME: pango-1.20.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 603 K
PACKAGE SIZE (uncompressed): 3010 K
PACKAGE DESCRIPTION:
pango: pango (library for layout and rendering of text)
pango:
pango: Pango is a library for layout and rendering of text, with an emphasis
pango: on internationalization. Pango can be used anywhere that text layout
pango: is needed; however, most of the work on Pango was done using the GTK+
pango: widget toolkit as a test platform. Pango forms the core of text and
pango: font handling for GTK+-2.
pango:
PACKAGE NAME: patch-2.5.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 62 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
patch: patch (apply a diff file to an original file or files)
patch:
patch: Patch is a utility used to apply diffs (or patches) to files, which
patch: are usually source code.
patch:
patch: Larry Wall wrote the original version of patch. Paul Eggert removed
patch: patch's arbitrary limits; added support for binary files, setting
patch: file times, and deleting files; and made it conform better to POSIX.
patch: Other contributors include Wayne Davison, who added unidiff support,
patch: and David MacKenzie, who added configuration and backup support.
patch:
PACKAGE NAME: pciutils-2.2.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 241 K
PACKAGE SIZE (uncompressed): 780 K
PACKAGE DESCRIPTION:
pciutils: pciutils (PCI utilities)
pciutils:
pciutils: lspci displays detailed information about all PCI buses and devices
pciutils: in the system, replacing the original /proc/pci interface.
pciutils:
pciutils: setpci allows reading from and writing to PCI device configuration
pciutils: registers. For example, you can adjust the latency timers with it.
pciutils:
pciutils: See the manual pages for more details.
pciutils:
PACKAGE NAME: pcmciautils-014-i486-4.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 27 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
pcmciautils: pcmciautils (Utilities for using PCMCIA cards with 2.6+ kernels)
pcmciautils:
pcmciautils: This package provides PCMCIA tools that replace the pcmcia-cs
pcmciautils: tools used with the 2.4.x Linux kernel. PCMCIA cards are commonly
pcmciautils: used in laptops to provide expanded capabilities such as network
pcmciautils: connections, modems, increased memory, and more.
pcmciautils:
pcmciautils:
pcmciautils:
pcmciautils:
PACKAGE NAME: pcre-7.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 464 K
PACKAGE SIZE (uncompressed): 1190 K
PACKAGE DESCRIPTION:
pcre: pcre (Perl-compatible regular expression library)
pcre:
pcre: The PCRE library is a set of functions that implement regular
pcre: expression pattern matching using the same syntax and semantics as
pcre: Perl 5, with just a few differences (documented in the man page).
pcre:
pcre: The PCRE library is used by KDE's Konqueror browser.
pcre:
PACKAGE NAME: perl-5.8.8-i486-6.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 13292 K
PACKAGE SIZE (uncompressed): 34480 K
PACKAGE DESCRIPTION:
perl: perl (Practical Extraction and Report Language)
perl:
perl: Larry Wall's "Practical Extraction and Report Language". Perl is a
perl: language optimized for scanning arbitrary text files, extracting
perl: information from those text files, and printing reports based on that
perl: information. It's also a good language for many system management
perl: tasks. The language is intended to be practical (easy to use,
perl: efficient, complete) rather than beautiful (tiny, elegant, minimal).
perl:
PACKAGE NAME: php-5.2.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 7785 K
PACKAGE SIZE (uncompressed): 21160 K
PACKAGE DESCRIPTION:
php: php (HTML-embedded scripting language)
php:
php: PHP is an HTML-embedded scripting language. It shares syntax
php: characteristics with C, Java, and Perl. The primary objective behind
php: this language is to make a fast and easy-to-use scripting language
php: for dynamic web sites.
php:
php: More information can be found online at
http://www.php.net/
php:
PACKAGE NAME: pidentd-3.0.19-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 45 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
pidentd: pidentd (TCP/IP IDENT protocol server)
pidentd:
pidentd: The identd daemon implements the IDENT protocol as specified in
pidentd: RFC1413. When your machine connects to a remote system, the remote
pidentd: machine may connect to your identd daemon to find out either the
pidentd: user name or other information about the process that initiated
pidentd: the connection. Some remote machines may choose not to allow your
pidentd: connections if you do not provide access to an identd daemon.
pidentd:
pidentd: The pidentd daemon was written by Peter Eriksson.
pidentd:
PACKAGE NAME: pidgin-2.4.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 10015 K
PACKAGE SIZE (uncompressed): 27700 K
PACKAGE DESCRIPTION:
pidgin: pidgin (GTK+ instant messaging program)
pidgin:
pidgin: Pidgin allows you to talk to anyone using a variety of messaging
pidgin: protocols, including AIM (Oscar and TOC), ICQ, IRC, Yahoo!, MSN
pidgin: Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr. These protocols
pidgin: are implemented using a modular, easy to use design. To use a
pidgin: protocol, just load the plugin for it.
pidgin:
pidgin: For more info, see:
http://www.pidgin.im
pidgin:
PACKAGE NAME: pilot-link-0.12.3-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 642 K
PACKAGE SIZE (uncompressed): 1970 K
PACKAGE DESCRIPTION:
pilot-link: pilot-link (library for communicating with PalmOS devices)
pilot-link:
pilot-link: This is a library for communicating with Palm Computing, Inc. Palm
pilot-link: Devices as well as the Handspring Visor, TRGPro, and other devices
pilot-link: which conform to this standard (PalmOS licensed devices).
pilot-link:
pilot-link: pilot-link is used by KPilot.
pilot-link:
PACKAGE NAME: pine-4.64-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1876 K
PACKAGE SIZE (uncompressed): 4590 K
PACKAGE DESCRIPTION:
pine: pine (a menu driven mail client)
pine:
pine: A menu driven user mail program. Originally based on Elm (Pine Is
pine: No-longer Elm), but with many additional features that make it
pine: easier to use. Also contains pilot (a simple file manager) and
pine: pico (an easy to use text editor).
pine:
PACKAGE NAME: pinentry-0.7.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 132 K
PACKAGE SIZE (uncompressed): 310 K
PACKAGE DESCRIPTION:
pinentry: pinentry (PIN Entry dialogs)
pinentry:
pinentry: This is a collection of simple PIN or passphrase entry dialogs which
pinentry: utilize the Assuan protocol as described by the aegypten project.
pinentry:
pinentry: See
http://www.gnupg.org/aegypten/ for details.
pinentry:
PACKAGE NAME: pixman-0.10.0-i486-4.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 71 K
PACKAGE SIZE (uncompressed): 200 K
PACKAGE DESCRIPTION:
pixman: pixman
pixman:
pixman: pixman contains low-level pixel manipulation routines and is used by
pixman: both xorg and cairo.
pixman:
pixman: For more information about the X.Org Foundation (the providers of the
pixman: X.Org implementation of the X Window System), see their website:
pixman:
pixman:
http://www.x.org
pixman:
PACKAGE NAME: pkg-config-0.23-i486-2.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 58 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
pkg-config: pkg-config (system for managing library compile/link flags)
pkg-config:
pkg-config: pkg-config is a system for managing library compile/link flags
pkg-config: that works with automake and autoconf. It replaces the ubiquitous
pkg-config: *-config scripts you may have seen with a single tool. See the man
pkg-config: page that comes with pkg-config for full documentation.
pkg-config:
PACKAGE NAME: pkgtools-12.1.0-noarch-7.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 37 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
pkgtools: pkgtools (The Slackware package maintenance system)
pkgtools:
pkgtools: This package contains utilities for handling Slackware packages.
pkgtools: Included are the command line utilities 'installpkg', 'removepkg',
pkgtools: 'makepkg', 'explodepkg', and 'upgradepkg' that install, remove,
pkgtools: build, examine, and upgrade software packages. Also included are
pkgtools: 'pkgtool', a menu based program for installing packages, removing
pkgtools: packages, or viewing the packages that are installed on the system,
pkgtools: documentation (man pages), and a few other system admin scripts.
pkgtools:
PACKAGE NAME: pmake-1.111-i486-3.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 122 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
pmake: pmake (BSD parallel make)
pmake:
pmake: This is PMake -- a parallel Make program originally written for the
pmake: Sprite operating system, ported from BSD Unix. This may be useful if
pmake: you're going to port software with Makefiles designed for BSD.
pmake:
pmake: PMake was written by Adam de Boor.
pmake:
PACKAGE NAME: popa3d-1.0.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
popa3d: popa3d (a POP3 daemon)
popa3d:
popa3d: popa3d is a Post Office Protocol version 3 (POP3) server. A POP3
popa3d: server operates on local mailboxes on behalf of its remote users.
popa3d: Users can connect at any time to check their mailbox and fetch the
popa3d: mail that has accumulated. The design goals of this POP3 server are
popa3d: security, reliability, RFC compliance (slightly relaxed to work with
popa3d: real-world POP3 clients), and high performance.
popa3d:
popa3d: The popa3d daemon was written by Solar Designer.
popa3d:
PACKAGE NAME: poppler-0.6.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 927 K
PACKAGE SIZE (uncompressed): 3240 K
PACKAGE DESCRIPTION:
poppler: poppler (a library for rendering PDF documents)
poppler:
poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek
poppler: Noonburg of Glyph and Cog, LLC. Since xpdf does not provide a shared
poppler: library, whenever a flaw was found potentially dozens of applications
poppler: incorporating code from xpdf would have to be patched. By providing
poppler: a centralized PDF library this duplicated effort will be eliminated.
poppler:
PACKAGE NAME: poppler-data-0.2.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 3994 K
PACKAGE SIZE (uncompressed): 11590 K
PACKAGE DESCRIPTION:
poppler-data: poppler-data (data files used by poppler)
poppler-data:
poppler-data: This package consists of encoding files for use with poppler. The
poppler-data: encoding files are optional and poppler will automatically read them
poppler-data: if they are present. When installed, the encoding files enables
poppler-data: poppler to correctly render CJK and Cyrillic properly. While poppler
poppler-data: is licensed under the GPL, these encoding files are copyright Adobe
poppler-data: and licensed much more strictly, and thus distributed separately.
poppler-data:
PACKAGE NAME: popt-1.7-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 51 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
popt: popt (command line parsing library)
popt:
popt: Popt is a C library for parsing command line parameters. Popt was
popt: heavily influenced by the getopt() and getopt_long() functions, but it
popt: improves on them by allowing more powerful argument expansion. Popt
popt: can parse arbitrary argv[] style arrays and automatically set
popt: variables based on command line arguments. Popt allows command line
popt: arguments to be aliased via configuration files and includes utility
popt: functions for parsing arbitrary strings into argv[] arrays using
popt: shell-like rules.
popt:
PACKAGE NAME: portmap-6.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 29 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
portmap: portmap (a daemon to manage RPC connections)
portmap:
portmap: The portmapper (/sbin/rpc.portmap) is a network daemon used to manage
portmap: connections to RPC services. Daemons that offer RPC services (such
portmap: as the daemons for NFS) tell the portmapper on what port they listen.
portmap: Unlike the services registered with the inetd, RPC network port
portmap: numbers may change each time the system is booted.
portmap:
portmap: The portmapper is required to use NFS or other RPC services.
portmap:
PACKAGE NAME: ppp-2.4.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 455 K
PACKAGE SIZE (uncompressed): 1210 K
PACKAGE DESCRIPTION:
ppp: ppp (Point-to-Point Protocol)
ppp:
ppp: The Point-to-Point Protocol (PPP) provides a method for transmitting
ppp: data over serial links. It's commonly used for connecting to the
ppp: Internet using a modem. This package includes the PPP daemon (pppd),
ppp: which negotiates with the peer to establish the link and sets up the
ppp: ppp network interface, and pppsetup, an easy-to-use utility for
ppp: setting up your PPP daemon.
ppp:
PACKAGE NAME: printproto-1.0.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
printproto: printproto
printproto:
printproto: printproto is part of X11.
printproto:
printproto: For more information about the X.Org Foundation (the providers of the
printproto: X.Org implementation of the X Window System), see their website:
printproto:
printproto:
http://www.x.org
printproto:
PACKAGE NAME: procmail-3.22-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 140 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
procmail: procmail (mail processing and local delivery program)
procmail:
procmail: Can be used to create mail-servers, mailing lists, sort your incoming
procmail: mail into separate folders/files (real convenient when subscribing to
procmail: one or more mailing lists or for prioritizing your mail), preprocess
procmail: your mail, start any programs upon mail arrival (e.g. to generate
procmail: different chimes on your workstation for different types of mail) or
procmail: selectively forward certain incoming mail automatically to someone.
procmail: Procmail is required by sendmail to deliver the local mail.
procmail: The author of procmail is Stephen R. van den Berg.
procmail:
PACKAGE NAME: procps-3.2.7-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 254 K
PACKAGE SIZE (uncompressed): 570 K
PACKAGE DESCRIPTION:
procps: procps (utilities for displaying process information)
procps:
procps: The procps package provides the classic set of utilities used to
procps: display information about the processes currently running on the
procps: machine.
procps:
PACKAGE NAME: proftpd-1.3.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 802 K
PACKAGE SIZE (uncompressed): 2810 K
PACKAGE DESCRIPTION:
proftpd: proftpd (FTP server daemon)
proftpd:
proftpd: ProFTPD is the Professional File Transfer Protocol (FTP) server
proftpd: daemon. ProFTPD grew out of the desire to have a secure and
proftpd: configurable FTP server, and out of a significant admiration of the
proftpd: Apache web server.
proftpd:
PACKAGE NAME: proxymngr-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
proxymngr: proxymngr
proxymngr:
proxymngr: proxymngr is part of X11.
proxymngr:
proxymngr: For more information about the X.Org Foundation (the providers of the
proxymngr: X.Org implementation of the X Window System), see their website:
proxymngr:
proxymngr:
http://www.x.org
proxymngr:
PACKAGE NAME: pssh-1.3.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
pssh: pssh (tools for collective remote system management)
pssh:
pssh: Pssh, a.k.a. "parallel ssh", are Python-written wrapper scripts for
pssh: OpenSSH and rsync tools. They are useful for simultaneous control
pssh: of large number of machines, using parallel ssh sessions. Included
pssh: are parallel versions of ssh, scp, and rsync, as well as a parallel
pssh: kill command.
pssh:
pssh: Pssh has been written by Brent N. Chun, and requires the python
pssh: package installed.
pssh:
PACKAGE NAME: pth-2.0.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 109 K
PACKAGE SIZE (uncompressed): 260 K
PACKAGE DESCRIPTION:
pth: pth (GNU Portable Threads)
pth:
pth: Pth is a very portable POSIX/ANSI-C based library for Unix platforms
pth: which provides non-preemptive priority-based scheduling for multiple
pth: threads of execution (aka `multithreading') inside event-driven
pth: applications. All threads run in the same address space of the
pth: server application, but each thread has its own individual
pth: program-counter, run-time stack, signal mask and errno variable.
pth:
PACKAGE NAME: pycairo-1.4.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 66 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
pycairo: pycairo (a set of Python bindings for the cairo graphics library)
pycairo:
pycairo: Pycairo is set of Python bindings for the cairo graphics library.
pycairo:
pycairo: Pycairo's web site:
http://cairographics.org/pycairo
pycairo:
PACKAGE NAME: pygobject-2.14.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 162 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
pygobject: pygobject (GObject bindings for Python)
pygobject:
pygobject: This archive contains bindings for the GObject, to be used in Python.
pygobject: It is a fairly complete set of bindings, it's already rather useful,
pygobject: and is usable to write moderately complex programs.
pygobject:
pygobject: pygobject's home page:
http://www.pygtk.org/
pygobject:
PACKAGE NAME: pygtk-2.12.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 2409 K
PACKAGE SIZE (uncompressed): 15580 K
PACKAGE DESCRIPTION:
pygtk: pygtk (GTK+ bindings for Python)
pygtk:
pygtk: PyGTK provides a convenient wrapper for the GTK+ library for use in
pygtk: Python programs, taking care of many of the boring details such as
pygtk: managing memory and type casting.
pygtk:
pygtk: PyGTK's web page:
http://www.pygtk.org/
pygtk:
PACKAGE NAME: pyrex-0.9.6.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 284 K
PACKAGE SIZE (uncompressed): 1240 K
PACKAGE DESCRIPTION:
pyrex: pyrex (A Python extension modules language)
pyrex:
pyrex: Pyrex is a language for writing Python extension modules. Pyrex
pyrex: lets you write code that mixes Python and C data types any way you
pyrex: want, and then compiles it into a C extension for Python.
pyrex:
pyrex: The home page for Pyrex is:
pyrex:
http://www.cosc.canterbury.ac.nz/~greg/python/Pyrex/
pyrex:
PACKAGE NAME: python-2.5.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 15407 K
PACKAGE SIZE (uncompressed): 65500 K
PACKAGE DESCRIPTION:
python: python (object-oriented interpreted programming language)
python:
python: Python is an interpreted, interactive, object-oriented programming
python: language that combines remarkable power with very clear syntax.
python: Python's basic power can be extended with your own modules written in
python: C or C++. Python is also adaptable as an extension language for
python: existing applications.
python:
PACKAGE NAME: qca-1.0-i486-4.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 42 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
qca: qca (Qt Cryptographic Architecture)
qca:
qca: QCA aims to provide a straightforward and cross-platform crypto API,
qca: using Qt datatypes and conventions. QCA separates the API from the
qca: implementation, using plugins known as Providers. The advantage of
qca: this model is to allow applications to avoid linking to or explicitly
qca: depending on any particular cryptographic library. This allows one
qca: to easily change or upgrade crypto implementations without needing
qca: to recompile the application.
qca:
qca: QCA was written by Justin Karneges.
PACKAGE NAME: qca-tls-1.0-i486-6.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
qca-tls: qca-tls (SSL/TLS plugin for QCA)
qca-tls:
qca-tls: This is a plugin to provide SSL/TLS capability to programs that
qca-tls: utilize the Qt Cryptographic Architecture (QCA).
qca-tls:
qca-tls: The qca-tls plugin was written by Justin Karneges.
qca-tls:
PACKAGE NAME: qt-3.3.8b-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 16469 K
PACKAGE SIZE (uncompressed): 50710 K
PACKAGE DESCRIPTION:
qt: Qt (a multi-platform C++ graphical user interface toolkit)
qt:
qt: Qt is a complete and well-developed object-oriented framework for
qt: developing graphical user interface (GUI) applications using C++.
qt:
qt: This release is free only for development of free software for the X
qt: Window System. If you use Qt for developing commercial or other
qt: non-free software, you must have a professional license. Please see
qt:
http://www.trolltech.com/purchase.html for information on how to
qt: obtain a professional license.
qt:
PACKAGE NAME: quota-3.13-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 327 K
PACKAGE SIZE (uncompressed): 790 K
PACKAGE DESCRIPTION:
quota: quota (Linux disk quota utilities)
quota:
quota: An implementation of the diskquota system for the Linux operating
quota: system to keep those greedy users from gobbling up 100% of the hard
quota: drive space. Works with ext2, ext3, reiserfs, and xfs filesystems.
quota: This system is based on the Melbourne quota system by Robert Elz.
quota: Edvard Tuinder and Marco van Wieringen ported this code to Linux.
quota: Jan Kara added support for the new Linux quota format and the XFS
quota: filesystem.
quota:
PACKAGE NAME: randrproto-1.2.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 19 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
randrproto: randrproto
randrproto:
randrproto: randrproto is part of X11.
randrproto:
randrproto: For more information about the X.Org Foundation (the providers of the
randrproto: X.Org implementation of the X Window System), see their website:
randrproto:
randrproto:
http://www.x.org
randrproto:
PACKAGE NAME: rcs-5.7-i486-2.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 274 K
PACKAGE SIZE (uncompressed): 550 K
PACKAGE DESCRIPTION:
rcs: rcs (Revision Control System)
rcs:
rcs: RCS, the Revision Control System, manages multiple revisions of files.
rcs:
rcs: RCS can store, retrieve, log, identify, and merge revisions. It is
rcs: useful for files that are revised frequently, e.g. programs,
rcs: documentation, graphics, and papers.
rcs:
PACKAGE NAME: rdesktop-1.5.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 123 K
PACKAGE SIZE (uncompressed): 370 K
PACKAGE DESCRIPTION:
rdesktop: rdesktop (Remote Desktop Protocol client)
rdesktop:
rdesktop: rdesktop is a client for Remote Desktop Protocol (RDP), used in a
rdesktop: number of Microsoft products including Windows NT Terminal Server,
rdesktop: Windows 2000 Server, Windows XP, and Windows 2003 Server.
rdesktop:
rdesktop: For more information, see:
http://www.rdesktop.org
rdesktop:
PACKAGE NAME: rdist-6.1.5-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 58 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
rdist: rdist
rdist:
rdist: Rdist is a remote file distribution program. It is used to maintain
rdist: identical copies of files over multiple network hosts. It preserves
rdist: the owner, group, mode, and mtime of files if possible and can update
rdist: programs that are executing.
rdist:
PACKAGE NAME: readline-5.2-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 375 K
PACKAGE SIZE (uncompressed): 820 K
PACKAGE DESCRIPTION:
readline: readline (line input library with editing features)
readline:
readline: The GNU Readline library provides a set of functions for use by
readline: applications that allow users to edit command lines as they are typed
readline: in. Both Emacs and vi editing modes are available. The Readline
readline: library includes additional functions to maintain a list of previously
readline: entered command lines, to recall and perhaps edit those lines, and
readline: perform csh-like history expansion on previous commands.
readline:
PACKAGE NAME: recordproto-1.13.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
recordproto: recordproto
recordproto:
recordproto: recordproto is part of X11.
recordproto:
recordproto: For more information about the X.Org Foundation (the providers of the
recordproto: X.Org implementation of the X Window System), see their website:
recordproto:
recordproto:
http://www.x.org
recordproto:
PACKAGE NAME: reiserfsprogs-3.6.19-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 451 K
PACKAGE SIZE (uncompressed): 970 K
PACKAGE DESCRIPTION:
reiserfsprogs: reiserfsprogs
reiserfsprogs:
reiserfsprogs: These utilities are used for Reiserfs. Reiserfs is a file system
reiserfsprogs: based on balanced tree algorithms. Learn more at the home site:
reiserfsprogs:
http://www.namesys.com
reiserfsprogs:
reiserfsprogs: Reiserfs is the work of Hans Reiser and many others. See the file
reiserfsprogs: /usr/doc/reiserfs*/README for full credits.
reiserfsprogs:
PACKAGE NAME: rendercheck-1.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
rendercheck: rendercheck
rendercheck:
rendercheck: rendercheck is part of X11.
rendercheck:
rendercheck: For more information about the X.Org Foundation (the providers of the
rendercheck: X.Org implementation of the X Window System), see their website:
rendercheck:
rendercheck:
http://www.x.org
rendercheck:
PACKAGE NAME: renderproto-0.9.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
renderproto: renderproto
renderproto:
renderproto: renderproto is part of X11.
renderproto:
renderproto: For more information about the X.Org Foundation (the providers of the
renderproto: X.Org implementation of the X Window System), see their website:
renderproto:
renderproto:
http://www.x.org
renderproto:
PACKAGE NAME: resourceproto-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
resourceproto: resourceproto
resourceproto:
resourceproto: resourceproto is part of X11.
resourceproto:
resourceproto: For more information about the X.Org Foundation (the providers of the
resourceproto: X.Org implementation of the X Window System), see their website:
resourceproto:
resourceproto:
http://www.x.org
resourceproto:
PACKAGE NAME: rexima-1.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
rexima: rexima (console audio mixer)
rexima:
rexima: Rexima is a curses-based interactive audio mixer. It can also be used
rexima: from the command-line. It's designed to be small, fast, and
rexima: straightforward. It also offers a command line mode so you can script
rexima: mixer settings.
rexima:
rexima: Rexima was written by Russell Marks.
rexima:
PACKAGE NAME: rgb-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
rgb: rgb
rgb:
rgb: rgb is part of X11.
rgb:
rgb: For more information about the X.Org Foundation (the providers of the
rgb: X.Org implementation of the X Window System), see their website:
rgb:
rgb:
http://www.x.org
rgb:
PACKAGE NAME: rp-pppoe-3.8-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 100 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
rp-pppoe: rp-pppoe (Roaring Penguin PPPoE client)
rp-pppoe:
rp-pppoe: PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
rp-pppoe: many ADSL Internet Service Providers. Roaring Penguin has a free
rp-pppoe: client for Linux systems to connect to PPPoE service providers.
rp-pppoe:
rp-pppoe: The client is a user-mode program and does not require any kernel
rp-pppoe: modifications. It is fully compliant with RFC 2516, the official
rp-pppoe: PPPoE specification.
rp-pppoe:
PACKAGE NAME: rpm-4.2.1-i486-3.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 2393 K
PACKAGE SIZE (uncompressed): 6330 K
PACKAGE DESCRIPTION:
rpm: rpm
rpm:
rpm: RPM is a tool from Red Hat Software used to install and remove
rpm: packages in the .rpm format. When installing RPM packages on
rpm: Slackware, you may need to use the --nodeps and --force options.
rpm: Before installing any binary package, it's wise to examine it to
rpm: see what it's going to do, and if it will overwrite any files. You
rpm: can use rpm2tgz to convert .rpm packages to .tgz packages so you
rpm: can look them over.
rpm:
PACKAGE NAME: rpm2tgz-1.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
rpm2tgz: rpm2tgz (a tool for converting an RPM archive into a tar+gz one)
rpm2tgz:
rpm2tgz: Converts RPM format to Slackware's GNU tar + GNU zip format. (view
rpm2tgz: converted packages with "less", install and remove with "installpkg",
rpm2tgz: "removepkg", "pkgtool", or manually with "tar").
rpm2tgz:
rpm2tgz: Converted packages come with no warranty. ;-)
rpm2tgz:
PACKAGE NAME: rstart-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
rstart: rstart
rstart:
rstart: rstart is part of X11.
rstart:
rstart: For more information about the X.Org Foundation (the providers of the
rstart: X.Org implementation of the X Window System), see their website:
rstart:
rstart:
http://www.x.org
rstart:
PACKAGE NAME: rsync-3.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 257 K
PACKAGE SIZE (uncompressed): 490 K
PACKAGE DESCRIPTION:
rsync: rsync (remote file sync)
rsync:
rsync: rsync is a replacement for rcp that has many more features. It
rsync: uses the "rsync algorithm" which provides a very fast method for
rsync: bringing remote files into sync. It does this by sending just the
rsync: differences in the files across the link, without requiring that both
rsync: sets of files are present at one of the ends of the link beforehand.
rsync:
rsync: rsync was written by Andrew Tridgell and Paul Mackerras.
rsync:
PACKAGE NAME: rt61-firmware-1.2-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
rt61-firmware: rt61-firmware (Firmware for Ralink rt61 wireless chips)
rt61-firmware:
rt61-firmware: This is firmware for the Ralink rt61 wireless chip.
rt61-firmware:
PACKAGE NAME: rt71w-firmware-1.8-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 10 K
PACKAGE DESCRIPTION:
rt71w-firmware: rt71w-firmware (Firmware for Ralink rt71w wireless chips)
rt71w-firmware:
rt71w-firmware: This is firmware for the Ralink rt71w wireless chip.
rt71w-firmware:
PACKAGE NAME: ruby-1.8.6_p114-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 3110 K
PACKAGE SIZE (uncompressed): 20120 K
PACKAGE DESCRIPTION:
ruby: ruby (Interpreted object-oriented scripting language)
ruby:
ruby: Ruby is an interpreted scripting language for quick and easy
ruby: object-oriented programming. It has many features to process text
ruby: files and to do system management tasks (as in Perl). It is simple,
ruby: straight-forward, and extensible.
ruby:
ruby: Visit the Ruby project online at
http://www.ruby-lang.org/
ruby:
PACKAGE NAME: rxvt-2.7.10-i486-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 193 K
PACKAGE SIZE (uncompressed): 530 K
PACKAGE DESCRIPTION:
rxvt: rxvt (terminal emulator)
rxvt:
rxvt: rxvt is a color vt102 terminal emulator intended as an xterm
rxvt: replacement for users who do not require features such as Tektronix
rxvt: 4014 emulation and toolkit-style configurability. As a result, rxvt
rxvt: uses much less memory -- a significant advantage on a machine serving
rxvt: many X sessions. Also included is rclock, an analog clock for X.
rxvt:
PACKAGE NAME: rzip-2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
rzip: rzip (a large-file compression program)
rzip:
rzip: rzip is a file compression program designed to do particularly well
rzip: on very large files containing long distance redundancy.
rzip:
rzip: rzip was written by Andrew Tridgell.
rzip:
PACKAGE NAME: samba-3.0.28a-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 22037 K
PACKAGE SIZE (uncompressed): 53310 K
PACKAGE DESCRIPTION:
samba: samba (SMB file and print server)
samba:
samba: Samba is an SMB file and print server for SMB and CIFS clients. It
samba: allows you to make file space or printers on a Samba host available to
samba: any PCs running SMB clients (such as PCs running Windows).
samba:
samba: If you have any SMB servers (such as Windows NT/2K Server), you may be
samba: able to replace them by or supplement them with Samba. One of Samba's
samba: big strengths is integration, so you can use it to tie together your
samba: Linux hosts and Windows PC clients.
samba:
PACKAGE NAME: sane-1.0.19-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 3666 K
PACKAGE SIZE (uncompressed): 10260 K
PACKAGE DESCRIPTION:
sane: sane (Scanner Access Now Easy)
sane:
sane: SANE is a universal scanner interface that provides standardized
sane: access to any raster image scanner hardware, such as flatbed scanners,
sane: hand-held scanners, video and still cameras, frame-grabbers, and other
sane: similar devices.
sane:
PACKAGE NAME: sazanami-fonts-ttf-20040629-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10157 K
PACKAGE SIZE (uncompressed): 17880 K
PACKAGE DESCRIPTION:
sazanami-fonts-ttf: sazanami-fonts-ttf (Japanese TrueType Unicode fonts)
sazanami-fonts-ttf:
sazanami-fonts-ttf: The Sazanami fonts contain Hiragana, Katakana, and Kanji/Han
sazanami-fonts-ttf: Ideographs.
sazanami-fonts-ttf:
sazanami-fonts-ttf: Homepage of efont:
http://sourceforge.jp/projects/efont/
sazanami-fonts-ttf:
PACKAGE NAME: sc-7.16-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 194 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
sc: sc (spreadsheet calculator)
sc:
sc: This is a simple curses-based spreadsheet program.
sc:
PACKAGE NAME: scim-1.4.7-i486-6.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1318 K
PACKAGE SIZE (uncompressed): 3550 K
PACKAGE DESCRIPTION:
scim: scim (Smart Common Input Method platform)
scim:
scim: SCIM is an input platform for CJK and other languages.
scim: It aims to significantly reduce the difficulty of input method
scim: development.
scim:
scim: See the scim scripts in /etc/profile.d/ for setup info.
scim:
scim: scim home:
http://www.scim-im.org/
scim:
PACKAGE NAME: scim-anthy-1.2.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 379 K
PACKAGE SIZE (uncompressed): 1120 K
PACKAGE DESCRIPTION:
scim-anthy: scim-anthy (a SCIM IMEngine module for anthy)
scim-anthy:
scim-anthy: SCIM is Smart Common Input Method platform, it provides a user
scim-anthy: friendly and full featured user interface and development platform to
scim-anthy: make input method developer's lives easier. Anthy is a system for
scim-anthy: Japanese input method. It converts Hiragana text to Kana Kanji
scim-anthy: mixed text.
scim-anthy:
scim-anthy: scim-anthy home:
http://scim-imengine.sourceforge.jp/
scim-anthy:
PACKAGE NAME: scim-bridge-0.4.14-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 124 K
PACKAGE SIZE (uncompressed): 430 K
PACKAGE DESCRIPTION:
scim-bridge: scim-bridge (yet another gtk-immodule for SCIM)
scim-bridge:
scim-bridge: Scim-bridge is yet another gtk-immodule for SCIM. Scim-bridge
scim-bridge: consists of two parts, that is, client and agent (server). The client
scim-bridge: is a GTK immodule which communicates with the agent over sockets.
scim-bridge: The agent communicates with SCIM, and brings back the data
scim-bridge: for each client.
scim-bridge:
scim-bridge: scim-bridge home:
http://scim-im.org/
scim-bridge:
PACKAGE NAME: scim-hangul-0.3.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 58 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
scim-hangul: scim-hangul (SCIM IMengine for Hangul)
scim-hangul:
scim-hangul: Scim-hangul is a SCIM IMEngine module for inputing korean scripts.
scim-hangul: Scim-hangul is for native speakers, not for foreigners.
scim-hangul: If you don't want to learn korean keyboard layout, use scim-tables.
scim-hangul: This engine supports 2 beolsik, 3 beolsik final, 3 beolsik 390,
scim-hangul: 3 beolsik, no-shift and etc. You can input chinese characters
scim-hangul: (hanja) with F9 key when you a have preedit string.
scim-hangul:
scim-hangul: scim-hangul home:
http://www.scim-im.org/projects/imengines
scim-hangul:
PACKAGE NAME: scim-m17n-0.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 41 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
scim-m17n: scim-m17n (bridge IMengine to support m17n input methods in SCIM)
scim-m17n:
scim-m17n: SCIM is a developing platform to significantly reduce the difficulty
scim-m17n: of input method development. scim-m17n is a SCIM IMEngine module
scim-m17n: which uses the m17n library as the backend.
scim-m17n:
scim-m17n: scim-m17n home:
http://scim-im.org/
scim-m17n:
PACKAGE NAME: scim-pinyin-0.5.91-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2240 K
PACKAGE SIZE (uncompressed): 5260 K
PACKAGE DESCRIPTION:
scim-pinyin: scim-pinyin (smart pinyin IM engine)
scim-pinyin:
scim-pinyin: This package provides a smart pinyin IM engine for SCIM. It includes
scim-pinyin: the plugin modules and the data files to use the smart pinyin input
scim-pinyin: input method for Chinese.
scim-pinyin:
scim-pinyin: scim-pinyin home:
http://www.scim-im.org/
scim-pinyin:
PACKAGE NAME: scim-tables-0.5.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6614 K
PACKAGE SIZE (uncompressed): 13220 K
PACKAGE DESCRIPTION:
scim-tables: scim-tables (tables IMEngine for scim)
scim-tables:
scim-tables: This is scim-tables IMEngine, which provides many CJK input methods.
scim-tables:
scim-tables: scim-tables home:
http://scim-im.org/
scim-tables:
PACKAGE NAME: screen-4.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 561 K
PACKAGE SIZE (uncompressed): 800 K
PACKAGE DESCRIPTION:
screen: screen (screen manager with VT100/ANSI terminal emulation)
screen:
screen: Screen is a full-screen window manager that multiplexes a physical
screen: terminal between several processes (typically interactive shells).
screen: Each virtual terminal provides the functions of a DEC VT100 terminal
screen: and several control functions from the ISO 6492 (ECMA 48, ANSI X3.64)
screen: and ISO 2022 standards (e.g. insert/delete line and support for
screen: multiple character sets). There is a scrollback history buffer for
screen: each virtual terminal and a copy-and-paste mechanism that allows
screen: moving text regions between windows.
screen:
PACKAGE NAME: scripts-1.0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
scripts: scripts
scripts:
scripts: scripts is part of X11.
scripts:
scripts: For more information about the X.Org Foundation (the providers of the
scripts: X.Org implementation of the X Window System), see their website:
scripts:
scripts:
http://www.x.org
scripts:
PACKAGE NAME: scrnsaverproto-1.1.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
scrnsaverproto: scrnsaverproto
scrnsaverproto:
scrnsaverproto: scrnsaverproto is part of X11.
scrnsaverproto:
scrnsaverproto: For more information about the X.Org Foundation (the providers of the
scrnsaverproto: X.Org implementation of the X Window System), see their website:
scrnsaverproto:
scrnsaverproto:
http://www.x.org
scrnsaverproto:
PACKAGE NAME: sdl-1.2.13-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 757 K
PACKAGE SIZE (uncompressed): 2860 K
PACKAGE DESCRIPTION:
sdl: sdl (Simple DirectMedia Layer library)
sdl:
sdl: This is the Simple DirectMedia Layer, a generic API that provides low
sdl: level access to audio, keyboard, mouse, joystick, 3D hardware via
sdl: OpenGL, and 2D framebuffer across multiple platforms.
sdl:
sdl: SDL links against alsa-lib, arts, audiofile, esound, and the X11
sdl: libraries. Make sure all of these are installed if you're planning to
sdl: use SDL (a full installation will cover all of the prerequisites).
sdl:
PACKAGE NAME: sdparm-1.01-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 103 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
sdparm: sdparm (fetch and change SCSI attributes)
sdparm:
sdparm: sdparm is a utility for listing and potentially changing SCSI disk
sdparm: parameters. More generally it can be used on any device that uses
sdparm: a SCSI command set. Apart from SCSI disks, examples of devices that
sdparm: use SCSI command sets are ATAPI CD/DVD drives, SCSI and ATAPI tape
sdparm: drives and SCSI enclosures.
sdparm:
sdparm: sdparm was written by Douglas Gilbert.
sdparm:
PACKAGE NAME: seamonkey-1.1.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 16952 K
PACKAGE SIZE (uncompressed): 67900 K
PACKAGE DESCRIPTION:
seamonkey: SeaMonkey (an open-source web browser suite)
seamonkey:
seamonkey: The SeaMonkey browser suite. SeaMonkey features a state-of-the-art
seamonkey: web browser and powerful email client, as well as a WYSIWYG web page
seamonkey: composer and a feature-rich IRC chat client. For web developers,
seamonkey: mozilla.org's DOM inspector and JavaScript debugger tools are
seamonkey: included as well.
seamonkey:
seamonkey: Visit the SeaMonkey project at this URL:
seamonkey:
http://www.mozilla.org/projects/seamonkey/
seamonkey:
PACKAGE NAME: sed-4.1.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 155 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
sed: sed (stream editor)
sed:
sed: This is the GNU version of sed, a stream editor. A stream editor is
sed: used to perform basic text transformations on an input stream (a file
sed: or input from a pipeline). It is sed's ability to filter text in a
sed: pipeline which distinguishes it from other types of editors.
sed:
sed: sed is a required package (it is needed by many system scripts).
sed:
PACKAGE NAME: seejpeg-1.10-i386-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 53 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
seejpeg: seejpeg (console JPEG viewer)
seejpeg:
seejpeg: Seejpeg is an image viewer which uses SVGAlib. In spite of the name,
seejpeg: it understands the JPEG, GIF, PPM, BMP and TARGA formats. One nice
seejpeg: feature of seejpeg is that it automatically decides on the best video
seejpeg: mode to use based on the image being displayed and the video card
seejpeg: being used.
seejpeg:
seejpeg: Evan Harris is the author of seejpeg.
seejpeg:
PACKAGE NAME: sendmail-8.14.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 1294 K
PACKAGE SIZE (uncompressed): 3280 K
PACKAGE DESCRIPTION:
sendmail: sendmail (mail transfer agent)
sendmail:
sendmail: Eric Allman's mail transport agent. The _Unix System Administration
sendmail: Handbook_ calls sendmail 'The most complex and complete mail delivery
sendmail: system in common use...'
sendmail:
sendmail: Ready-made configuration files are included for systems connected by
sendmail: TCP/IP (with or without a nameserver) and for systems using UUCP.
sendmail:
sendmail: The procmail package is required to handle local mail delivery.
sendmail:
PACKAGE NAME: sendmail-cf-8.14.2-noarch-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 269 K
PACKAGE SIZE (uncompressed): 1110 K
PACKAGE DESCRIPTION:
sendmail-cf: sendmail-cf (configuration files for sendmail)
sendmail-cf:
sendmail-cf: These files are used to create sendmail.cf configuration files. The
sendmail-cf: m4 macro processor is also required in order to make use of these
sendmail-cf: files.
sendmail-cf:
sendmail-cf: The files and documentation in /usr/share/sendmail should make it
sendmail-cf: possible to support virtually any mail configuration. NOTE: You
sendmail-cf: probably won't need this package if you're planning to use one of the
sendmail-cf: sendmail.cf samples included in the sendmail package.
sendmail-cf:
PACKAGE NAME: sessreg-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
sessreg: sessreg
sessreg:
sessreg: sessreg is part of X11.
sessreg:
sessreg: For more information about the X.Org Foundation (the providers of the
sessreg: X.Org implementation of the X Window System), see their website:
sessreg:
sessreg:
http://www.x.org
sessreg:
PACKAGE NAME: setxkbmap-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
setxkbmap: setxkbmap
setxkbmap:
setxkbmap: setxkbmap is part of X11.
setxkbmap:
setxkbmap: For more information about the X.Org Foundation (the providers of the
setxkbmap: X.Org implementation of the X Window System), see their website:
setxkbmap:
setxkbmap:
http://www.x.org
setxkbmap:
PACKAGE NAME: seyon-2.20c-i486-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 127 K
PACKAGE SIZE (uncompressed): 340 K
PACKAGE DESCRIPTION:
seyon: seyon (telecommunications package)
seyon:
seyon: Seyon is a complete full-featured telecommunications package for the
seyon: X Window System. Some of its features are: Dialing directory that
seyon: supports an unlimited number of entries. Terminal emulation window
seyon: supporting DEC VT02, Tektronix 4014, and ANSI. Script language to
seyon: automate tedious tasks such as logging into remote hosts. Unlimited
seyon: number of slots for external file transfer protocols. Support for
seyon: zmodem auto-download. Seyon is intended to be both simple and
seyon: extensively configurable.
seyon:
PACKAGE NAME: shadow-4.0.3-i486-15.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 773 K
PACKAGE SIZE (uncompressed): 1880 K
PACKAGE DESCRIPTION:
shadow: shadow (shadow password suite)
shadow:
shadow: This set of login related programs utilizes an alternate, non-readable
shadow: file to contain the actual encrypted passwords. This is presumed to
shadow: increase system security by increasing the difficulty with which
shadow: system crackers obtain encrypted passwords. It was written by
shadow: Julianne Frances Haugh and the Linux port is maintained by Tomasz
shadow: Kloczko.
shadow:
shadow: This package provides 'login', which is needed to log into the system.
shadow:
PACKAGE NAME: shared-mime-info-0.23-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 587 K
PACKAGE SIZE (uncompressed): 3250 K
PACKAGE DESCRIPTION:
shared-mime-info: shared-mime-info (MIME database)
shared-mime-info:
shared-mime-info: This package contains:
shared-mime-info:
shared-mime-info: The freedesktop.org shared MIME database spec.
shared-mime-info: The merged GNOME and KDE databases, in the new format.
shared-mime-info: The update-mime-database command, used to install new MIME data.
shared-mime-info:
shared-mime-info: See
http://www.freedesktop.org/standards/shared-mime-info.html for
shared-mime-info: more information.
shared-mime-info:
PACKAGE NAME: sharutils-4.6.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 197 K
PACKAGE SIZE (uncompressed): 660 K
PACKAGE DESCRIPTION:
sharutils: sharutils (GNU shell archive packing utilities)
sharutils:
sharutils: `shar' makes so-called shell archives out of many files, preparing
sharutils: them for transmission by electronic mail services. `unshar' helps
sharutils: unpacking shell archives after reception. `uuencode' prepares a file
sharutils: for transmission over an electronic channel which ignores or otherwise
sharutils: mangles the eight bit (high order bit) of bytes. `uudecode' does the
sharutils: converse transformation. `remsync' allows for remote synchronization
sharutils: of directory trees using electronic mail.
sharutils:
PACKAGE NAME: showfont-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
showfont: showfont
showfont:
showfont: showfont is part of X11.
showfont:
showfont: For more information about the X.Org Foundation (the providers of the
showfont: X.Org implementation of the X Window System), see their website:
showfont:
showfont:
http://www.x.org
showfont:
PACKAGE NAME: sinhala_lklug-font-ttf-20060929-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 95 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
sinhala_lklug-font-ttf: sinhala_lklug-font-ttf (Sinhala Unicode TrueType font)
sinhala_lklug-font-ttf:
sinhala_lklug-font-ttf: This is a free Sri Lankan 'Sinhala' Unicode font. Its development was
sinhala_lklug-font-ttf: initiated by the LK LUG in 2003.
sinhala_lklug-font-ttf:
sinhala_lklug-font-ttf: Development home:
http://sinhala.sourceforge.net/
sinhala_lklug-font-ttf:
PACKAGE NAME: slang-2.1.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 380 K
PACKAGE SIZE (uncompressed): 1170 K
PACKAGE DESCRIPTION:
slang: slang (S-Lang interpreter version 2)
slang:
slang: S-Lang is an interpreted language that was designed from the start
slang: to be easily embedded into a program to provide it with a powerful
slang: extension language. S-Lang is also a programmer's library that
slang: permits a programmer to develop sophisticated platform-independent
slang: software. In addition to providing the S-Lang extension language,
slang: the library provides facilities for screen management, keymaps,
slang: and low-level terminal I/O.
slang:
PACKAGE NAME: slang1-1.4.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 200 K
PACKAGE SIZE (uncompressed): 500 K
PACKAGE DESCRIPTION:
slang1: slang (S-Lang interpreter version 1)
slang1:
slang1: S-Lang is an interpreted language that was designed from the start
slang1: to be easily embedded into a program to provide it with a powerful
slang1: extension language. S-Lang is also a programmer's library that
slang1: permits a programmer to develop sophisticated platform-independent
slang1: software. In addition to providing the S-Lang extension language,
slang1: the library provides facilities for screen management, keymaps,
slang1: and low-level terminal I/O.
slang1:
PACKAGE NAME: slocate-3.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 29 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
slocate: slocate (Secure Locate)
slocate:
slocate: Slocate is an enhanced version of locate, a command to help you locate
slocate: files on the system. Like the original version of locate, Slocate
slocate: maintains a database of files on the system, updating it nightly.
slocate: Unlike the original, Slocate indexes every file on the machine rather
slocate: than only the ones that can be seen by everyone. The "secure" part of
slocate: slocate is that it will only return matches if the user is allowed to
slocate: see the files.
slocate:
PACKAGE NAME: slrn-0.9.8.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 771 K
PACKAGE SIZE (uncompressed): 2100 K
PACKAGE DESCRIPTION:
slrn: slrn (s-lang read news)
slrn:
slrn: slrn is an easy to use but powerful newsreader. It is highly
slrn: customizable, supports scoring, free key bindings, and can be extended
slrn: using the s-lang macro language.
slrn:
slrn: slrn was written by John E. Davis, and is maintained by Thomas
slrn: Schultz.
slrn:
PACKAGE NAME: smartmontools-5.38-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 268 K
PACKAGE SIZE (uncompressed): 600 K
PACKAGE DESCRIPTION:
smartmontools: smartmontools (hard drive monitoring utilities)
smartmontools:
smartmontools: SMARTMONTOOLS contains utilities that control and monitor storage
smartmontools: devices using the Self-Monitoring, Analysis and Reporting Technology
smartmontools: (S.M.A.R.T.) system build into ATA and SCSI Hard Drives. This is used
smartmontools: to check the reliability of the hard drive and to predict drive
smartmontools: failures. SMARTMONTOOLS Version 5.x is designed to comply to the
smartmontools: ATA/ATAPI-5 specification (Revision 1). Future releases of
smartmontools: SMARTMONTOOLS (Versions 6.x and 7.x) will comply with the ATA/ATAPI-6
smartmontools: and ATA/ATAPI-7 specifications.
smartmontools:
PACKAGE NAME: smproxy-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
smproxy: smproxy
smproxy:
smproxy: smproxy is part of X11.
smproxy:
smproxy: For more information about the X.Org Foundation (the providers of the
smproxy: X.Org implementation of the X Window System), see their website:
smproxy:
smproxy:
http://www.x.org
smproxy:
PACKAGE NAME: sox-12.18.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 292 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
sox: sox (universal sound sample translator)
sox:
sox: Sox is a universal sound converter, player, and recorder. It can
sox: play, record, and convert between several sound file formats such as
sox: .au, .snd, .voc and .wav.
sox:
PACKAGE NAME: splitvt-1.6.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 28 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
splitvt: splitvt (run multiple shells in a single window)
splitvt:
splitvt: This program splits the screen into two windows, one above the other,
splitvt: and runs a shell in each one.
splitvt:
splitvt: Splitvt was written by Sam Lantinga.
splitvt:
PACKAGE NAME: startup-notification-0.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 42 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
startup-notification: startup-notification ("busy" cursors support)
startup-notification:
startup-notification: Adds support for applications to use "busy" cursors while starting up.
startup-notification:
PACKAGE NAME: strace-4.5.15-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 98 K
PACKAGE SIZE (uncompressed): 240 K
PACKAGE DESCRIPTION:
strace: strace (trace system calls and signals)
strace:
strace: Strace allows you to trace the execution of a command. It runs the
strace: specified command until it exits, intercepting signals and system
strace: calls and dumping the information to the standard error. System
strace: administrators, diagnosticians and trouble-shooters will find it
strace: invaluable for solving problems with programs for which the source
strace: is not readily available since they do not need to be recompiled in
strace: order to trace them.
strace:
PACKAGE NAME: stunnel-4.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 117 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
stunnel: stunnel (Universal SSL tunnel)
stunnel:
stunnel: The stunnel program is designed to work as an SSL encryption wrapper
stunnel: between remote client and local (inetd-startable) or remote servers.
stunnel: The goal is to facilitate SSL encryption and authentication for
stunnel: non-SSL-aware programs.
stunnel:
stunnel: stunnel can be used to add SSL functionality to commonly used inetd
stunnel: daemons like POP-2, POP-3 and IMAP servers without any changes in the
stunnel: programs' code.
stunnel:
PACKAGE NAME: subversion-1.4.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/d
PACKAGE SIZE (compressed): 2328 K
PACKAGE SIZE (uncompressed): 7230 K
PACKAGE DESCRIPTION:
subversion: subversion (a version control system)
subversion:
subversion: Subversion is a version control system which allows you to keep old
subversion: versions of files and directories (usually source code), and keep a
subversion: log of who, when, and why changes occurred, similar to other such
subversion: systems like CVS, RCS or SCCS. Subversion keeps all the information
subversion: to permit extracting previous versions of those files at any time.
subversion:
subversion: For more information about the Subversion project, visit:
subversion:
http://subversion.tigris.org
subversion:
PACKAGE NAME: sudo-1.6.8p12-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 133 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
sudo: sudo (give limited root privileges to certain users)
sudo:
sudo: 'sudo' is a command that allows users to execute some commands as
sudo: root. The /etc/sudoers file (edited with 'visudo') specifies which
sudo: users have access to sudo and which commands they can run. 'sudo'
sudo: logs all its activities to /var/log/ so the system administrator
sudo: can keep an eye on things.
sudo:
PACKAGE NAME: svgalib-1.9.25-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 651 K
PACKAGE SIZE (uncompressed): 1490 K
PACKAGE DESCRIPTION:
svgalib: svgalib (A low level graphics library for Linux)
svgalib:
svgalib: This is a low level graphics library for Linux, originally based on
svgalib: VGAlib 1.2 by Tommy Frandsen. Support for many more chipsets has
svgalib: been added.
svgalib:
svgalib: This version of svgalib requires a kernel module (svgalib_helper),
svgalib: which is separately packaged in "svgalib_helper".
svgalib:
svgalib: svgalib is currently maintained by Matan Ziv-Av.
svgalib:
PACKAGE NAME: svgalib_helper-1.9.25_2.6.24.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
svgalib_helper: svgalib_helper (kernel module required by svgalib)
svgalib_helper:
svgalib_helper: This package contains the kernel module (svgalib_helper)
svgalib_helper: required by the svgalib package.
svgalib_helper:
svgalib_helper: svgalib is currently maintained by Matan Ziv-Av.
svgalib_helper:
PACKAGE NAME: sysfsutils-2.1.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 43 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
sysfsutils: sysfsutils (Utilities for the sysfs filesystem)
sysfsutils:
sysfsutils: The purpose of this package is to provide a set of utilities for
sysfsutils: interfacing with sysfs, a virtual filesystem in Linux kernel versions
sysfsutils: 2.6+ that provides a tree of system devices. While a filesystem is a
sysfsutils: very useful interface, a library (libsysfs) is also included that
sysfsutils: will hopefully make it easier for applications to query system
sysfsutils: devices and their attributes.
sysfsutils:
PACKAGE NAME: sysklogd-1.4.1-i486-10.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 59 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
sysklogd: sysklogd (Linux system logging utilities)
sysklogd:
sysklogd: Dr. Greg Wettstein and Stephen Tweedie's syslogd/klogd.
sysklogd:
sysklogd: This package contains a modified version of syslogd for the Linux
sysklogd: environment. An additional utility, klogd, is included which allows
sysklogd: kernel logging to be directed through the syslogd facility.
sysklogd: Syslogd and klogd are started when your system boots.
sysklogd:
PACKAGE NAME: syslinux-3.52-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 338 K
PACKAGE SIZE (uncompressed): 830 K
PACKAGE DESCRIPTION:
syslinux: syslinux (SYSLINUX/PXELINUX/ISOLINUX boot loaders)
syslinux:
syslinux: SYSLINUX is a boot loader for the Linux operating system which
syslinux: operates off an MS-DOS/Windows FAT filesystem. This is used by the
syslinux: Slackware makebootdisk script to create system boot floppies.
syslinux:
syslinux: Also included are PXELINUX and ISOLINUX, boot loaders for booting from
syslinux: a network server or CD-ROM.
syslinux:
syslinux: SYSLINUX, PXELINUX, and ISOLINUX were written by H. Peter Anvin.
syslinux:
PACKAGE NAME: sysstat-7.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 123 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
sysstat: sysstat (system performance monitoring tools)
sysstat:
sysstat: The sysstat utilities are a collection of performance monitoring
sysstat: tools for Linux. These include sar, sadf, mpstat, iostat and sa
sysstat: tools.
sysstat:
sysstat: The sysstat utilities were written by Sebastien Godard.
sysstat:
PACKAGE NAME: sysvinit-2.86-i486-6.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 305 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
sysvinit: sysvinit (init, the parent of all processes)
sysvinit:
sysvinit: System V style init programs by Miquel van Smoorenburg that control
sysvinit: the booting and shutdown of your system. These support a number of
sysvinit: system runlevels, each with a specific set of utilities spawned.
sysvinit: For example, the normal system runlevel is 3, which starts agetty
sysvinit: on virtual consoles tty1 - tty6. Runlevel 4 starts xdm.
sysvinit: Runlevel 0 shuts the system down.
sysvinit:
PACKAGE NAME: sysvinit-functions-8.53-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 32 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
sysvinit-functions: sysvinit-functions (/etc/init.d/functions)
sysvinit-functions:
sysvinit-functions: This is the /etc/init.d/functions file, the typical sysvinit-style
sysvinit-functions: directories, and a few supporting binaries. Using this system,
sysvinit-functions: subdirectories of /etc/rc.d/ are searched for scripts (which are
sysvinit-functions: usually symlinks to the script in /etc/init.d/ or /etc/rc.d/init.d/).
sysvinit-functions: The links must start with S to start a script or K to stop (kill) it.
sysvinit-functions:
sysvinit-functions: For the most part, these are useful for running software developed
sysvinit-functions: for other versions of Linux.
sysvinit-functions:
PACKAGE NAME: sysvinit-scripts-1.2-noarch-20.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
sysvinit-scripts: sysvinit-scripts (the basic scripts used to boot your machine)
sysvinit-scripts:
sysvinit-scripts: These are the Slackware boot scripts, which are needed to start the
sysvinit-scripts: machine. Sysvinit looks for these in /etc/rc.d/.
sysvinit-scripts:
PACKAGE NAME: t1lib-5.1.0-i486-3.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 969 K
PACKAGE SIZE (uncompressed): 1520 K
PACKAGE DESCRIPTION:
t1lib: t1lib (Type 1 font rasterizer library)
t1lib:
t1lib: t1lib is a library distributed under the GNU General Public Library
t1lib: License for generating character and string glyphs from Adobe Type 1
t1lib: fonts under UNIX. t1lib uses most of the code of the X11 rasterizer
t1lib: donated by IBM to the X11 project.
t1lib:
PACKAGE NAME: taglib-1.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 224 K
PACKAGE SIZE (uncompressed): 860 K
PACKAGE DESCRIPTION:
taglib: taglib (audio meta-data library)
taglib:
taglib: TagLib is a library for reading and editing the meta-data of several
taglib: popular audio formats. Currently it supports both ID3v1 and ID3v2
taglib: for MP3 files, Ogg Vorbis comments and ID3 tags and Vorbis comments
taglib: in FLAC files.
taglib:
PACKAGE NAME: tango-icon-theme-0.8.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 1780 K
PACKAGE SIZE (uncompressed): 8700 K
PACKAGE DESCRIPTION:
tango-icon-theme: Tango icon theme (Another standard icon theme)
tango-icon-theme:
tango-icon-theme: The Tango Desktop Project has designed a basic set of desktop icons
tango-icon-theme: that follow the style guidelines. The set has been created as a
tango-icon-theme: proof of concept for the style, but works rather well as a replacement
tango-icon-theme: for the base theme under GNOME and KDE.
tango-icon-theme:
tango-icon-theme: Tango's home page is:
http://tango.freedesktop.org
tango-icon-theme:
PACKAGE NAME: tango-icon-theme-extras-0.1.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 178 K
PACKAGE SIZE (uncompressed): 1760 K
PACKAGE DESCRIPTION:
tango-icon-theme-extras: tango-icon-theme-extras (Extras for the Tango icon theme)
tango-icon-theme-extras:
tango-icon-theme-extras: This is an extension to the Tango Icon Theme. Currently it includes
tango-icon-theme-extras: Tango icons for iPod Digital Audio Player (DAP) devices and the Dell
tango-icon-theme-extras: Pocket DJ DAP.
tango-icon-theme-extras:
tango-icon-theme-extras: Visit the Tango project at:
http://tango-project.org/
tango-icon-theme-extras:
PACKAGE NAME: tar-1.16.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 757 K
PACKAGE SIZE (uncompressed): 1840 K
PACKAGE DESCRIPTION:
tar: tar (archiving utility)
tar:
tar: This is the GNU version of tar, an archiving program designed to store
tar: and extract files from an archive file known as a tarfile. A tarfile
tar: may be made on a tape drive, however, it is also common to write a
tar: tarfile to a normal file.
tar:
tar: Slackware's package system uses tarfiles compressed with GNU gzip.
tar:
PACKAGE NAME: tcl-8.4.18-i486-1.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 1746 K
PACKAGE SIZE (uncompressed): 4070 K
PACKAGE DESCRIPTION:
tcl: tcl (Tool Command Language)
tcl:
tcl: Tcl, developed by Dr. John Ousterhout, is a simple to use text-based
tcl: script language with many built-in features which make it especially
tcl: nice for writing interactive scripts.
tcl:
PACKAGE NAME: tclx-8.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 119 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
tclx: tclx (Extended Tcl)
tclx:
tclx: Extended Tcl (TclX), is a set of extensions to Tcl, the Tool Command
tclx: Language invented by Dr. John Ousterhout. Extended Tcl is oriented
tclx: towards Unix system programming tasks and large application
tclx: development. Many additional interfaces to the Unix operating system
tclx: are provided. Extended Tcl was designed and implemented by Karl
tclx: Lehenbauer (
[email protected]) and Mark Diekhans (
[email protected]),
tclx: with help in the early stages from Peter da Silva (
[email protected]).
tclx:
PACKAGE NAME: tcp_wrappers-7.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 99 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
tcp_wrappers: tcp_wrappers (TCP/IP daemon wrapper library and utilities)
tcp_wrappers:
tcp_wrappers: With this package you can monitor and filter incoming requests for
tcp_wrappers: network services for access control, and detection things like host
tcp_wrappers: name spoofing and host address spoofing. Nearly all the network
tcp_wrappers: daemons on Slackware are "wrapped" using this library, and most
tcp_wrappers: daemons in /etc/inetd.conf use tcp_wrappers' tcpd wrapper daemon.
tcp_wrappers: If you plan to do much networking, you will need tcp_wrappers.
tcp_wrappers:
tcp_wrappers: tcp_wrappers was written by Wietse Venema.
tcp_wrappers:
PACKAGE NAME: tcpdump-3.9.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 486 K
PACKAGE SIZE (uncompressed): 1120 K
PACKAGE DESCRIPTION:
tcpdump: tcpdump (network monitor)
tcpdump:
tcpdump: Tcpdump is a tool for network monitoring and data acquisition. You
tcpdump: can use it to dump information on all the packets on a network that
tcpdump: match a boolean expression. Tcpdump uses libpcap, a system
tcpdump: independent interface for user-level packet capture.
tcpdump:
PACKAGE NAME: tcsh-6.15.00-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 279 K
PACKAGE SIZE (uncompressed): 550 K
PACKAGE DESCRIPTION:
tcsh: tcsh (C shell)
tcsh:
tcsh: tcsh is an enhanced but completely compatible version of the Berkeley
tcsh: UNIX C shell, csh(1). It is a command language interpreter usable both
tcsh: as an interactive login shell and a shell script command processor. It
tcsh: includes a command-line editor, programmable word completion, spelling
tcsh: correction, a history mechanism, job control, and a C-like syntax.
tcsh:
PACKAGE NAME: telnet-0.17-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
telnet: telnet (the telnet client and daemon)
telnet:
telnet: telnet supports the original DARPA telnet interactive communication
telnet: protocol. As connecting to a telnetd server transmits your password
telnet: over the network in cleartext, telnet's use as a login protocol has
telnet: been mostly superceded by the use of ssh and sshd. However, the
telnet: telnet client is still a very handy tool, and telnetd may still have
telnet: some uses on networks that are known to be secure.
telnet:
telnet: telnet and telnetd were ported from BSD.
telnet:
PACKAGE NAME: tetex-3.0-i486-5.tgz
PACKAGE LOCATION: ./slackware/t
PACKAGE SIZE (compressed): 52149 K
PACKAGE SIZE (uncompressed): 155340 K
PACKAGE DESCRIPTION:
tetex: tetex (teTeX binaries and support files)
tetex:
tetex: This package contains the binaries and support files required for the
tetex: teTeX TeX distribution, such as input files for TeX, runtime
tetex: configuration files, hyphenation tables, manpages, and the computer
tetex: modern fonts.
tetex:
PACKAGE NAME: tetex-doc-3.0-i486-5.tgz
PACKAGE LOCATION: ./slackware/t
PACKAGE SIZE (compressed): 48168 K
PACKAGE SIZE (uncompressed): 93220 K
PACKAGE DESCRIPTION:
tetex-doc: tetex-doc (Documentation for teTeX)
tetex-doc:
tetex-doc: This package contains documentation for AMSTeX, BibTeX, extended plain
tetex-doc: format, font packages, format files (babel, texdraw, pstricks, xypic),
tetex-doc: LaTeX, MetaPost, Makeindex, pdftex, the Kpathsea library, as well as
tetex-doc: general information about TeX such as a list of ftp servers, a draft
tetex-doc: for the TeX Directory Standard (TDS), The TeX and LaTeX Catalogue,
tetex-doc: TeX FAQs, and more.
tetex-doc:
PACKAGE NAME: texinfo-4.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 874 K
PACKAGE SIZE (uncompressed): 1950 K
PACKAGE DESCRIPTION:
texinfo: texinfo (GNU software documentation system)
texinfo:
texinfo: 'Texinfo' is a documentation system that uses a single source file to
texinfo: produce both on-line information and printed output. Using Texinfo,
texinfo: you can create a printed document with the normal features of a book,
texinfo: including chapters, sections, cross references, and indices. From the
texinfo: same Texinfo source file, you can create a menu-driven, on-line Info
texinfo: file with nodes, menus, cross references, and indices.
texinfo:
texinfo: This package is needed to read the documentation files in /usr/info.
texinfo:
PACKAGE NAME: tftp-hpa-0.48-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 49 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
tftp-hpa: tftp-hpa (Trivial File Transfer Protocol)
tftp-hpa:
tftp-hpa: The Trivial File Transfer Protocol (TFTP) is normally used only for
tftp-hpa: booting diskless workstations (or the Slackware installer). The tftp
tftp-hpa: package provides the user interface for TFTP, which allows users to
tftp-hpa: transfer files to and from a remote machine. This program and TFTP
tftp-hpa: provide very little security, and should not be enabled unless it is
tftp-hpa: expressly needed.
tftp-hpa:
tftp-hpa: tftp-hpa is maintained by H. Peter Anvin.
tftp-hpa:
PACKAGE NAME: tibmachuni-font-ttf-1.901-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1601 K
PACKAGE SIZE (uncompressed): 4440 K
PACKAGE DESCRIPTION:
tibmachuni-font-ttf: tibmachuni-font-ttf (Tibetan Machine Unicode font)
tibmachuni-font-ttf:
tibmachuni-font-ttf: The Tibetan & Himalayan Digital Library's Unicode character based
tibmachuni-font-ttf: "Tibetan Machine Uni" OpenType font for writing Tibetan, Dzongkha and
tibmachuni-font-ttf: Ladakhi in dbu can script with full support for the Sanskrit
tibmachuni-font-ttf: combinations found in chos-skad texts.
tibmachuni-font-ttf:
tibmachuni-font-ttf: tibmachuni-font-ttf home:
http://thdl.org/
tibmachuni-font-ttf:
PACKAGE NAME: time-1.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
time: time (the GNU time command for measuring program resource use)
time:
time: The `time' command runs another program, then displays information
time: about the resources used by that program, collected by the system
time: while the program was running.
time:
time: GNU time was originally written by David Keppel, with later versions
time: worked on by David MacKenzie, Arne Henrik Juul, and Francois Pinard.
time:
PACKAGE NAME: tin-1.8.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 681 K
PACKAGE SIZE (uncompressed): 1770 K
PACKAGE DESCRIPTION:
tin: tin (the Tin newsreader)
tin:
tin: Tin is a full-screen, easy-to-use Netnews reader. It can read news
tin: locally (i.e. /var/spool/news) or remotely (rtin or tin -r option)
tin: via a NNTP (Network News Transport Protocol) server. It will
tin: automatically utilize NOV (news overview) style index files if
tin: available locally or via the nntp xover command.
tin:
tin: Tin was written by Iain Lea <
[email protected]> and is currently
tin: maintained by Urs Janssen <
[email protected]>.
tin:
PACKAGE NAME: tix-8.1.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 986 K
PACKAGE SIZE (uncompressed): 3400 K
PACKAGE DESCRIPTION:
tix: tix (an extension to the Tk toolkit)
tix:
tix: Tix, which stands for Tk Interface Extension, is an extension library
tix: for Tcl/Tk. Tix adds many new widgets, image types and other commands
tix: that allows you to create compelling Tcl/Tk-based GUI applications.
tix: With these new widgets, your applications will look great and interact
tix: with your users in intuitive ways.
tix:
PACKAGE NAME: tk-8.4.18-i486-1.tgz
PACKAGE LOCATION: ./slackware/tcl
PACKAGE SIZE (compressed): 1425 K
PACKAGE SIZE (uncompressed): 3060 K
PACKAGE DESCRIPTION:
tk: tk (Tk toolkit for Tcl)
tk:
tk: Tk is an extension to Tcl that allows you to quickly and easily build
tk: X11 applications that have the look and feel of Motif apps.
tk:
PACKAGE NAME: traceroute-1.4a12-i386-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 19 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
traceroute: traceroute (IP packet route tracing utility)
traceroute:
traceroute: The traceroute utility displays the route used by IP packets on their
traceroute: way to a specified network host. Traceroute will display the IP
traceroute: number and host name (if possible) of all the machines along the route
traceroute: taken by the packets. If you're having network connectivity problems,
traceroute: traceroute can show you where the trouble is located.
traceroute:
PACKAGE NAME: transfig-3.2.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/t
PACKAGE SIZE (compressed): 213 K
PACKAGE SIZE (uncompressed): 600 K
PACKAGE DESCRIPTION:
transfig: transfig
transfig:
transfig: This package contains the binaries to transform .fig files (created by
transfig: xfig) to some other formats like epsf and LaTeX. If you have
transfig: installed xfig, you should also install this package if you want to
transfig: use xfig to create other files than .fig files, which can then be
transfig: included in your LaTeX documents.
transfig:
PACKAGE NAME: trapproto-3.4.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
trapproto: trapproto
trapproto:
trapproto: trapproto is part of X11.
trapproto:
trapproto: For more information about the X.Org Foundation (the providers of the
trapproto: X.Org implementation of the X Window System), see their website:
trapproto:
trapproto:
http://www.x.org
trapproto:
PACKAGE NAME: tree-1.5.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 29 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
tree: tree (a program to display a directory tree)
tree:
tree: Tree is a recursive directory listing program that produces a depth
tree: indented listing of files, which is colorized ala dircolors if the
tree: LS_COLORS environment variable is set and output is to tty. With no
tree: arguments, tree lists the files in the current directory.
tree:
tree: The tree utility was written by Steve Baker.
tree:
PACKAGE NAME: trn-3.6-i386-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 162 K
PACKAGE SIZE (uncompressed): 340 K
PACKAGE DESCRIPTION:
trn: trn (a threaded newsreader)
trn:
trn: A threaded news reader for reading a remote NNTP server. Compiled to
trn: use Overviews or mthreads, and to read news through your NNTP server.
trn: Be sure to set NNTPSERVER in your /etc/profile or /etc/csh.login.
trn:
PACKAGE NAME: ttf-indic-fonts-0.4.7.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3023 K
PACKAGE SIZE (uncompressed): 6920 K
PACKAGE DESCRIPTION:
ttf-indic-fonts: ttf-indic-fonts (Fonts for Indic scripts)
ttf-indic-fonts:
ttf-indic-fonts: This is a collection of free fonts that support some of the more
ttf-indic-fonts: widely used Indic scripts. Included are TTF fonts for Bengali,
ttf-indic-fonts: Devanagari, Gujarati, Kannada, Malayalam, Oriya, Punjabi, Tamil,
ttf-indic-fonts: and Telugu.
ttf-indic-fonts:
ttf-indic-fonts: For more information about enabling full Indic support (this package
ttf-indic-fonts: will enable display, but probably not input), see the
ttf-indic-fonts: Indic-Fonts-HOWTO which can be found in /usr/doc/Linux-HOWTOs.
ttf-indic-fonts:
PACKAGE NAME: twm-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 86 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
twm: twm
twm:
twm: twm is part of X11.
twm:
twm: For more information about the X.Org Foundation (the providers of the
twm: X.Org implementation of the X Window System), see their website:
twm:
twm:
http://www.x.org
twm:
PACKAGE NAME: udev-118-i486-3.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 182 K
PACKAGE SIZE (uncompressed): 520 K
PACKAGE DESCRIPTION:
udev: udev (dynamic device directory system)
udev:
udev: udev provides a dynamic device directory containing only the files
udev: for the devices which are actually present. It creates or removes
udev: device node files usually located in the /dev directory.
udev:
udev: Kay Sievers is the udev maintainer.
udev:
PACKAGE NAME: unarj-265-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
unarj: unarj (a command-line utility for decompressing .arj archives)
unarj:
unarj: This is a simple command-line tool for decompressing .arj files.
unarj: Thanks to Haruhiko Okumura and ARJ Software, Inc. for providing this
unarj: source code free of charge.
unarj:
unarj: UNARJ software and manual copyright (c) 1990-2002 ARJ Software, Inc.
unarj: All rights reserved.
unarj:
PACKAGE NAME: usbutils-0.73-i486-2.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 153 K
PACKAGE SIZE (uncompressed): 450 K
PACKAGE DESCRIPTION:
usbutils: usbutils (USB utilities)
usbutils:
usbutils: lsusb displays detailed information about all USB buses and devices
usbutils: in the system.
usbutils:
usbutils: usbmodules lists the kernel modules for a plugged in USB device.
usbutils:
usbutils: See the manual pages for more details.
usbutils:
PACKAGE NAME: utempter-1.1.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
utempter: utempter (utmp updating library and utility)
utempter:
utempter: The utempter package provides a utility and shared library that
utempter: allows terminal applications such as xterm and screen to update
utempter: /var/run/utmp and /var/log/wtmp without requiring root privileges.
utempter:
PACKAGE NAME: util-linux-ng-2.13.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 1990 K
PACKAGE SIZE (uncompressed): 5140 K
PACKAGE DESCRIPTION:
util-linux-ng: util-linux-ng (a huge collection of essential utilities)
util-linux-ng:
util-linux-ng: The util-linux package is a huge collection of random utilities
util-linux-ng: that are essential to run a Linux system. This is a fork of
util-linux-ng: the original util-linux, based on version 2.13-pre7.
util-linux-ng:
util-linux-ng:
http://kernel.org/~kzak/util-linux-ng/
util-linux-ng:
PACKAGE NAME: util-macros-1.1.6-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
util-macros: util-macros
util-macros:
util-macros: util-macros is part of X11.
util-macros:
util-macros: For more information about the X.Org Foundation (the providers of the
util-macros: X.Org implementation of the X Window System), see their website:
util-macros:
util-macros:
http://www.x.org
util-macros:
PACKAGE NAME: uucp-1.07-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 618 K
PACKAGE SIZE (uncompressed): 1210 K
PACKAGE DESCRIPTION:
uucp: uucp (Taylor UUCP)
uucp:
uucp: Ian Taylor's Unix to Unix copy: mail and news over modem lines.
uucp: This is the standard UUCP package of the Free Software Foundation.
uucp:
uucp: Configured to use HoneyDanBer and/or Taylor configuration files.
uucp:
PACKAGE NAME: videoproto-2.2.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
videoproto: videoproto
videoproto:
videoproto: videoproto is part of X11.
videoproto:
videoproto: For more information about the X.Org Foundation (the providers of the
videoproto: X.Org implementation of the X Window System), see their website:
videoproto:
videoproto:
http://www.x.org
videoproto:
PACKAGE NAME: viewres-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 12 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
viewres: viewres
viewres:
viewres: viewres is part of X11.
viewres:
viewres: For more information about the X.Org Foundation (the providers of the
viewres: X.Org implementation of the X Window System), see their website:
viewres:
viewres:
http://www.x.org
viewres:
PACKAGE NAME: vim-7.1.285-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 8422 K
PACKAGE SIZE (uncompressed): 23700 K
PACKAGE DESCRIPTION:
vim: vim (Vi IMproved)
vim:
vim: Vim is an almost compatible version of the UNIX editor vi. Many new
vim: features have been added: multi level undo, command line history,
vim: filename completion, block operations, and more.
vim:
vim: Vim's development is led by Bram Moolenaar.
vim:
vim: This package also contains the Exuberant Ctags program
vim: written by Darren Hiebert.
vim:
PACKAGE NAME: vim-gvim-7.1.285-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1837 K
PACKAGE SIZE (uncompressed): 3930 K
PACKAGE DESCRIPTION:
vim-gvim: vim-gvim (gvim, the X/GTK2 enabled version of vim)
vim-gvim:
vim-gvim: Gvim is a graphical version of vim. Vim is an almost compatible
vim-gvim: version of the UNIX editor vi. Many new features have been added,
vim-gvim: such as multi level undo, command line history, filename completion,
vim-gvim: block operations, and more.
vim-gvim:
vim-gvim: The main vim package in the AP series is required to use this package.
vim-gvim:
vim-gvim: Vim's development is led by Bram Moolenaar.
vim-gvim:
PACKAGE NAME: vlan-1.9-i486-2.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 25 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
vlan: vlan (VLAN (802.1q) configuration program)
vlan:
vlan: The vlan package contains the vconfig program, which allows you to
vlan: create and remove VLAN devices on a VLAN enabled kernel. VLAN
vlan: devices are virtual Ethernet devices which represent virtual LANs on
vlan: the physical LAN.
vlan:
vlan: vlan is primarily the work of Alex Zeffertt, Cambridge Broadband Ltd,
vlan: extensively rewritten by Ben Greear.
vlan:
PACKAGE NAME: vorbis-tools-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 185 K
PACKAGE SIZE (uncompressed): 540 K
PACKAGE DESCRIPTION:
vorbis-tools: vorbis-tools (Ogg Vorbis Tools)
vorbis-tools:
vorbis-tools: The vorbis-tools package contains several basic tools for working with
vorbis-tools: compressed audio files in the Ogg Vorbis (.ogg) format:
vorbis-tools:
vorbis-tools: oggenc (an .ogg encoder), ogg123 (a playback tool), vorbiscomment
vorbis-tools: (add comments to vorbis files), ogginfo (show information about an
vorbis-tools: ogg file), oggdec (a command line decoder), and vcut (a tool for
vorbis-tools: splitting vorbis files).
vorbis-tools:
vorbis-tools: These tools require the libao, libogg, and libvorbis libraries.
PACKAGE NAME: vsftpd-2.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 117 K
PACKAGE SIZE (uncompressed): 310 K
PACKAGE DESCRIPTION:
vsftpd: vsftpd (Very Secure FTP Daemon)
vsftpd:
vsftpd: vsftpd is an FTP server, or daemon. The 'vs' stands for Very Secure.
vsftpd: Obviously this is not a guarantee, but a reflection that the entire
vsftpd: codebase was written with security in mind, and carefully designed to
vsftpd: be resilient to attack (as well as extremely fast and scalable).
vsftpd:
vsftpd: The vsftpd homepage is
http://vsftpd.beasts.org/
vsftpd:
vsftpd: The Very Secure FTP Daemon was written by Chris Evans.
vsftpd:
PACKAGE NAME: vte-0.16.12-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 735 K
PACKAGE SIZE (uncompressed): 2060 K
PACKAGE DESCRIPTION:
vte: vte (terminal emulator widget)
vte:
vte: VTE is a terminal emulator widget for use with GTK+. This package
vte: contains the VTE library and development files and a sample
vte: implementation (vte).
vte:
vte: VTE is used by XFce.
vte:
PACKAGE NAME: wavpack-4.41.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 116 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
wavpack: wavpack (A lossless WAV file compressor)
wavpack:
wavpack: Wavpack is a hybrid lossless wavefile compressor. Wavfile is
wavpack: Copyright (c) 1998 - 2006 Conifer Software. All Rights Reserved.
wavpack:
wavpack: Wavpack is distributed under the BSD Software License.
wavpack:
wavpack: Visit the wavpack project online:
http://www.wavpack.com
wavpack:
PACKAGE NAME: wget-1.11.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 542 K
PACKAGE SIZE (uncompressed): 1480 K
PACKAGE DESCRIPTION:
wget: wget (a non-interactive network retriever)
wget:
wget: GNU Wget is a free network utility to retrieve files from the
wget: World Wide Web using HTTP and FTP, the two most widely used Internet
wget: protocols. It works non-interactively, thus enabling work in the
wget: background after having logged off.
wget:
wget: The author of Wget is Hrvoje Niksic <
[email protected]>.
wget:
PACKAGE NAME: which-2.16-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 23 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
which: which (shows the full path to shell commands)
which:
which: GNU 'which' takes one or more arguments. For each of its arguments it
which: prints to stdout the full path of the executables that would have been
which: executed when this argument had been entered at the shell prompt. It
which: does this by searching for an executable or script in the directories
which: listed in the environment variable PATH using the same algorithm as
which: bash(1). 'Which' is a built-in function in many shells.
which:
which: The GNU version of which was written by Carlo Wood.
which:
PACKAGE NAME: whois-4.7.26-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 41 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
whois: whois (whois directory client)
whois:
whois: This is an enhanced whois (RFC 954) client derived from the BSD and
whois: RIPE whois programs. It can automatically select the appropriate
whois: whois server for most queries.
whois:
whois: This version of whois was written by Marco d'Itri
whois: For more information, see:
http://www.linux.it/~md/software/
whois:
PACKAGE NAME: windowmaker-0.92.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 2661 K
PACKAGE SIZE (uncompressed): 6720 K
PACKAGE DESCRIPTION:
windowmaker: windowmaker (a fast and elegant window manager)
windowmaker:
windowmaker: Window Maker is a window manager for the X Window System that is
windowmaker: relatively fast and small, feature rich, easy to use, with a simple
windowmaker: and elegant appearance reminiscent of the NeXTSTEP(tm) graphical
windowmaker: user interface.
windowmaker:
windowmaker: Window Maker is part of the official GNU project.
windowmaker:
PACKAGE NAME: wireless-tools-29-i486-3.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 164 K
PACKAGE SIZE (uncompressed): 460 K
PACKAGE DESCRIPTION:
wireless-tools: wireless-tools (utilities for wireless networking)
wireless-tools:
wireless-tools: This package contains tools and a library used for configuring
wireless-tools: wireless networking interfaces:
wireless-tools: iwconfig (the main wireless tool), iwlist (display more detailed
wireless-tools: information than iwconfig), iwspy (get stats per MAC address and
wireless-tools: more), iwpriv (set driver private ioctls), iwgetid (show the
wireless-tools: ESSID or NWID of a device), iwevent (display wireless events),
wireless-tools: ifrename (rename a network interface).
wireless-tools:
wireless-tools: The wireless-tools were written by Jean Tourrilhes.
PACKAGE NAME: workbone-2.40-i386-3.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
workbone: workbone (text-based CD player)
workbone:
workbone: WorkBone is a simple interactive tool for for playing audio CDs from
workbone: the Linux console.
workbone:
PACKAGE NAME: wpa_supplicant-0.5.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 261 K
PACKAGE SIZE (uncompressed): 670 K
PACKAGE DESCRIPTION:
wpa_supplicant: wpa_supplicant (WPA/WPA2/IEEE 802.1X Supplicant)
wpa_supplicant:
wpa_supplicant: wpa_supplicant is a WPA Supplicant for Linux with support for WPA and
wpa_supplicant: WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
wpa_supplicant: component that is used in the client stations. It implements key
wpa_supplicant: negotiation with a WPA Authenticator and it controls the roaming and
wpa_supplicant: IEEE 802.11 authentication/association of the wlan driver.
wpa_supplicant:
wpa_supplicant: More info:
http://hostap.epitest.fi/wpa_supplicant/
wpa_supplicant:
PACKAGE NAME: wqy-zenhei-font-ttf-0.5.23-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8126 K
PACKAGE SIZE (uncompressed): 13880 K
PACKAGE DESCRIPTION:
wqy-zenhei-font-ttf: wqy-zenhei-font-ttf (Wen Quan Yi Zen Hei CJK Font)
wqy-zenhei-font-ttf:
wqy-zenhei-font-ttf: The WenQuanYi Zen Hei font is a Chinese (or CJK) outline font with
wqy-zenhei-font-ttf: Hei Ti style (a sans-serif style) Hanzi glyphs. This font is
wqy-zenhei-font-ttf: developed for general purpose use of Chinese for formating, printing
wqy-zenhei-font-ttf: and on-screen display. This font is also targeted at platform
wqy-zenhei-font-ttf: independence and the utility for document exchange between various
wqy-zenhei-font-ttf: operating systems.
wqy-zenhei-font-ttf:
wqy-zenhei-font-ttf: wqy-zenhei-font-ttf home:
http://wqy.sourceforge.net/en/
wqy-zenhei-font-ttf:
PACKAGE NAME: wv2-0.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 309 K
PACKAGE SIZE (uncompressed): 1120 K
PACKAGE DESCRIPTION:
wv2: wv2 (MS Word document import library)
wv2:
wv2: wv2 is a portable MS Word .doc import filter that is used by KWord.
wv2: Currently, it supports MS Word 6, MS Word 95, MS Word 97, MS Word
wv2: 2000, and MS Word 2002 (XP) documents. Older versions like Word 2, 3,
wv2: 4, and 5 aren't supported yet, but might be in the future.
wv2:
wv2: wv2's authors are Shaheed Haque, Werner Trobin, and David Faure.
wv2:
PACKAGE NAME: x11-skel-7.1-noarch-6.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
x11-skel: x11-skel (Miscellaneous things required for X)
x11-skel:
x11-skel: These are some symlinks needed by X11 after moving some files and
x11-skel: directories to conform with the Linux FHS. For example, the fonts
x11-skel: are now in the /usr/share/fonts directory, and this package makes
x11-skel: a symlink to there from /usr/lib/X11/fonts (the default location).
x11-skel: An /etc/xdg directory (the default for XDG_CONFIG_DIRS in the
x11-skel: XDG Base Directory Specification) is also contained in this package,
x11-skel: as well as sample xorg.conf files and other scripts.
x11-skel:
PACKAGE NAME: x11perf-1.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 55 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
x11perf: x11perf
x11perf:
x11perf: x11perf is part of X11.
x11perf:
x11perf: For more information about the X.Org Foundation (the providers of the
x11perf: X.Org implementation of the X Window System), see their website:
x11perf:
x11perf:
http://www.x.org
x11perf:
PACKAGE NAME: x3270-3.3.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 553 K
PACKAGE SIZE (uncompressed): 1190 K
PACKAGE DESCRIPTION:
x3270: x3270 (IBM host access tool for X)
x3270:
x3270: x3270 opens a telnet connection to an IBM host in an X window. Since
x3270: the window created by x3270 can use its own font for displaying
x3270: characters, is a fairly accurate representation of an IBM 3278.
x3270:
PACKAGE NAME: xauth-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 19 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xauth: xauth
xauth:
xauth: xauth is part of X11.
xauth:
xauth: For more information about the X.Org Foundation (the providers of the
xauth: X.Org implementation of the X Window System), see their website:
xauth:
xauth:
http://www.x.org
xauth:
PACKAGE NAME: xaw3d-1.5-i486-4.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 169 K
PACKAGE SIZE (uncompressed): 660 K
PACKAGE DESCRIPTION:
xaw3d: xaw3d (3D version of libXaw)
xaw3d:
xaw3d: Xaw3d is a set of 3D widgets by Kaleb S. Keithley based on the Athena
xaw3d: Widget set. The Three-D Athena may be used as a replacement for the
xaw3d: Athena (Xaw) Widget set -- you may relink almost any Athena Widget
xaw3d: based application and obtain a three dimensional appearance on some of
xaw3d: the widgets. You can also replace your shared libXaw with libXaw3d
xaw3d: and obtain the three dimensional appearance without even relinking.
xaw3d:
PACKAGE NAME: xbacklight-1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xbacklight: xbacklight
xbacklight:
xbacklight: xbacklight is part of X11.
xbacklight:
xbacklight: For more information about the X.Org Foundation (the providers of the
xbacklight: X.Org implementation of the X Window System), see their website:
xbacklight:
xbacklight:
http://www.x.org
xbacklight:
PACKAGE NAME: xbiff-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xbiff: xbiff
xbiff:
xbiff: xbiff is part of X11.
xbiff:
xbiff: For more information about the X.Org Foundation (the providers of the
xbiff: X.Org implementation of the X Window System), see their website:
xbiff:
xbiff:
http://www.x.org
xbiff:
PACKAGE NAME: xbitmaps-1.0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 22 K
PACKAGE SIZE (uncompressed): 240 K
PACKAGE DESCRIPTION:
xbitmaps: xbitmaps
xbitmaps:
xbitmaps: xbitmaps is part of X11.
xbitmaps:
xbitmaps: For more information about the X.Org Foundation (the providers of the
xbitmaps: X.Org implementation of the X Window System), see their website:
xbitmaps:
xbitmaps:
http://www.x.org
xbitmaps:
PACKAGE NAME: xcalc-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
xcalc: xcalc
xcalc:
xcalc: xcalc is part of X11.
xcalc:
xcalc: For more information about the X.Org Foundation (the providers of the
xcalc: X.Org implementation of the X Window System), see their website:
xcalc:
xcalc:
http://www.x.org
xcalc:
PACKAGE NAME: xcb-proto-1.0-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 280 K
PACKAGE DESCRIPTION:
xcb-proto: xcb-proto
xcb-proto:
xcb-proto: xcb-proto is part of X11.
xcb-proto:
xcb-proto: For more information about the X.Org Foundation (the providers of the
xcb-proto: X.Org implementation of the X Window System), see their website:
xcb-proto:
xcb-proto:
http://www.x.org
xcb-proto:
PACKAGE NAME: xchat-2.8.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 2231 K
PACKAGE SIZE (uncompressed): 5600 K
PACKAGE DESCRIPTION:
xchat: xchat
xchat:
xchat: X-Chat is a GTK+-based IRC (Internet Relay Chat) client.
xchat:
PACKAGE NAME: xclipboard-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xclipboard: xclipboard
xclipboard:
xclipboard: xclipboard is part of X11.
xclipboard:
xclipboard: For more information about the X.Org Foundation (the providers of the
xclipboard: X.Org implementation of the X Window System), see their website:
xclipboard:
xclipboard:
http://www.x.org
xclipboard:
PACKAGE NAME: xclock-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 22 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xclock: xclock
xclock:
xclock: xclock is part of X11.
xclock:
xclock: For more information about the X.Org Foundation (the providers of the
xclock: X.Org implementation of the X Window System), see their website:
xclock:
xclock:
http://www.x.org
xclock:
PACKAGE NAME: xcmiscproto-1.1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xcmiscproto: xcmiscproto
xcmiscproto:
xcmiscproto: xcmiscproto is part of X11.
xcmiscproto:
xcmiscproto: For more information about the X.Org Foundation (the providers of the
xcmiscproto: X.Org implementation of the X Window System), see their website:
xcmiscproto:
xcmiscproto:
http://www.x.org
xcmiscproto:
PACKAGE NAME: xcmsdb-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xcmsdb: xcmsdb
xcmsdb:
xcmsdb: xcmsdb is part of X11.
xcmsdb:
xcmsdb: For more information about the X.Org Foundation (the providers of the
xcmsdb: X.Org implementation of the X Window System), see their website:
xcmsdb:
xcmsdb:
http://www.x.org
xcmsdb:
PACKAGE NAME: xcompmgr-1.1.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xcompmgr: xcompmgr
xcompmgr:
xcompmgr: xcompmgr is part of X11.
xcompmgr:
xcompmgr: For more information about the X.Org Foundation (the providers of the
xcompmgr: X.Org implementation of the X Window System), see their website:
xcompmgr:
xcompmgr:
http://www.x.org
xcompmgr:
PACKAGE NAME: xconsole-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xconsole: xconsole
xconsole:
xconsole: xconsole is part of X11.
xconsole:
xconsole: For more information about the X.Org Foundation (the providers of the
xconsole: X.Org implementation of the X Window System), see their website:
xconsole:
xconsole:
http://www.x.org
xconsole:
PACKAGE NAME: xcursor-themes-1.0.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 439 K
PACKAGE SIZE (uncompressed): 3430 K
PACKAGE DESCRIPTION:
xcursor-themes: xcursor-themes
xcursor-themes:
xcursor-themes: xcursor-themes is part of X11.
xcursor-themes:
xcursor-themes: For more information about the X.Org Foundation (the providers of the
xcursor-themes: X.Org implementation of the X Window System), see their website:
xcursor-themes:
xcursor-themes:
http://www.x.org
xcursor-themes:
PACKAGE NAME: xcursorgen-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xcursorgen: xcursorgen
xcursorgen:
xcursorgen: xcursorgen is part of X11.
xcursorgen:
xcursorgen: For more information about the X.Org Foundation (the providers of the
xcursorgen: X.Org implementation of the X Window System), see their website:
xcursorgen:
xcursorgen:
http://www.x.org
xcursorgen:
PACKAGE NAME: xdbedizzy-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xdbedizzy: xdbedizzy
xdbedizzy:
xdbedizzy: xdbedizzy is part of X11.
xdbedizzy:
xdbedizzy: For more information about the X.Org Foundation (the providers of the
xdbedizzy: X.Org implementation of the X Window System), see their website:
xdbedizzy:
xdbedizzy:
http://www.x.org
xdbedizzy:
PACKAGE NAME: xditview-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
xditview: xditview
xditview:
xditview: xditview is part of X11.
xditview:
xditview: For more information about the X.Org Foundation (the providers of the
xditview: X.Org implementation of the X Window System), see their website:
xditview:
xditview:
http://www.x.org
xditview:
PACKAGE NAME: xdm-1.1.7-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 105 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
xdm: xdm
xdm:
xdm: xdm is part of X11.
xdm:
xdm: For more information about the X.Org Foundation (the providers of the
xdm: X.Org implementation of the X Window System), see their website:
xdm:
xdm:
http://www.x.org
xdm:
PACKAGE NAME: xdpyinfo-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xdpyinfo: xdpyinfo
xdpyinfo:
xdpyinfo: xdpyinfo is part of X11.
xdpyinfo:
xdpyinfo: For more information about the X.Org Foundation (the providers of the
xdpyinfo: X.Org implementation of the X Window System), see their website:
xdpyinfo:
xdpyinfo:
http://www.x.org
xdpyinfo:
PACKAGE NAME: xdriinfo-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xdriinfo: xdriinfo
xdriinfo:
xdriinfo: xdriinfo is part of X11.
xdriinfo:
xdriinfo: For more information about the X.Org Foundation (the providers of the
xdriinfo: X.Org implementation of the X Window System), see their website:
xdriinfo:
xdriinfo:
http://www.x.org
xdriinfo:
PACKAGE NAME: xedit-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 286 K
PACKAGE SIZE (uncompressed): 750 K
PACKAGE DESCRIPTION:
xedit: xedit
xedit:
xedit: xedit is part of X11.
xedit:
xedit: For more information about the X.Org Foundation (the providers of the
xedit: X.Org implementation of the X Window System), see their website:
xedit:
xedit:
http://www.x.org
xedit:
PACKAGE NAME: xev-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xev: xev
xev:
xev: xev is part of X11.
xev:
xev: For more information about the X.Org Foundation (the providers of the
xev: X.Org implementation of the X Window System), see their website:
xev:
xev:
http://www.x.org
xev:
PACKAGE NAME: xextproto-7.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 38 K
PACKAGE SIZE (uncompressed): 240 K
PACKAGE DESCRIPTION:
xextproto: xextproto
xextproto:
xextproto: xextproto is part of X11.
xextproto:
xextproto: For more information about the X.Org Foundation (the providers of the
xextproto: X.Org implementation of the X Window System), see their website:
xextproto:
xextproto:
http://www.x.org
xextproto:
PACKAGE NAME: xeyes-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xeyes: xeyes
xeyes:
xeyes: xeyes is part of X11.
xeyes:
xeyes: For more information about the X.Org Foundation (the providers of the
xeyes: X.Org implementation of the X Window System), see their website:
xeyes:
xeyes:
http://www.x.org
xeyes:
PACKAGE NAME: xf86-input-aiptek-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-input-aiptek: xf86-input-aiptek
xf86-input-aiptek:
xf86-input-aiptek: xf86-input-aiptek is part of X11.
xf86-input-aiptek:
xf86-input-aiptek: For more information about the X.Org Foundation (the providers of the
xf86-input-aiptek: X.Org implementation of the X Window System), see their website:
xf86-input-aiptek:
xf86-input-aiptek:
http://www.x.org
xf86-input-aiptek:
PACKAGE NAME: xf86-input-calcomp-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-calcomp: xf86-input-calcomp
xf86-input-calcomp:
xf86-input-calcomp: xf86-input-calcomp is part of X11.
xf86-input-calcomp:
xf86-input-calcomp: For more information about the X.Org Foundation (the providers of the
xf86-input-calcomp: X.Org implementation of the X Window System), see their website:
xf86-input-calcomp:
xf86-input-calcomp:
http://www.x.org
xf86-input-calcomp:
PACKAGE NAME: xf86-input-citron-2.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 25 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
xf86-input-citron: xf86-input-citron
xf86-input-citron:
xf86-input-citron: xf86-input-citron is part of X11.
xf86-input-citron:
xf86-input-citron: For more information about the X.Org Foundation (the providers of the
xf86-input-citron: X.Org implementation of the X Window System), see their website:
xf86-input-citron:
xf86-input-citron:
http://www.x.org
xf86-input-citron:
PACKAGE NAME: xf86-input-digitaledge-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-digitaledge: xf86-input-digitaledge
xf86-input-digitaledge:
xf86-input-digitaledge: xf86-input-digitaledge is part of X11.
xf86-input-digitaledge:
xf86-input-digitaledge: For more information about the X.Org Foundation (the providers of the
xf86-input-digitaledge: X.Org implementation of the X Window System), see their website:
xf86-input-digitaledge:
xf86-input-digitaledge:
http://www.x.org
xf86-input-digitaledge:
PACKAGE NAME: xf86-input-dynapro-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-dynapro: xf86-input-dynapro
xf86-input-dynapro:
xf86-input-dynapro: xf86-input-dynapro is part of X11.
xf86-input-dynapro:
xf86-input-dynapro: For more information about the X.Org Foundation (the providers of the
xf86-input-dynapro: X.Org implementation of the X Window System), see their website:
xf86-input-dynapro:
xf86-input-dynapro:
http://www.x.org
xf86-input-dynapro:
PACKAGE NAME: xf86-input-elo2300-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86-input-elo2300: xf86-input-elo2300
xf86-input-elo2300:
xf86-input-elo2300: xf86-input-elo2300 is part of X11.
xf86-input-elo2300:
xf86-input-elo2300: For more information about the X.Org Foundation (the providers of the
xf86-input-elo2300: X.Org implementation of the X Window System), see their website:
xf86-input-elo2300:
xf86-input-elo2300:
http://www.x.org
xf86-input-elo2300:
PACKAGE NAME: xf86-input-elographics-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-elographics: xf86-input-elographics
xf86-input-elographics:
xf86-input-elographics: xf86-input-elographics is part of X11.
xf86-input-elographics:
xf86-input-elographics: For more information about the X.Org Foundation (the providers of the
xf86-input-elographics: X.Org implementation of the X Window System), see their website:
xf86-input-elographics:
xf86-input-elographics:
http://www.x.org
xf86-input-elographics:
PACKAGE NAME: xf86-input-evdev-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xf86-input-evdev: xf86-input-evdev
xf86-input-evdev:
xf86-input-evdev: xf86-input-evdev is part of X11.
xf86-input-evdev:
xf86-input-evdev: For more information about the X.Org Foundation (the providers of the
xf86-input-evdev: X.Org implementation of the X Window System), see their website:
xf86-input-evdev:
xf86-input-evdev:
http://www.x.org
xf86-input-evdev:
PACKAGE NAME: xf86-input-fpit-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-fpit: xf86-input-fpit
xf86-input-fpit:
xf86-input-fpit: xf86-input-fpit is part of X11.
xf86-input-fpit:
xf86-input-fpit: For more information about the X.Org Foundation (the providers of the
xf86-input-fpit: X.Org implementation of the X Window System), see their website:
xf86-input-fpit:
xf86-input-fpit:
http://www.x.org
xf86-input-fpit:
PACKAGE NAME: xf86-input-hyperpen-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-hyperpen: xf86-input-hyperpen
xf86-input-hyperpen:
xf86-input-hyperpen: xf86-input-hyperpen is part of X11.
xf86-input-hyperpen:
xf86-input-hyperpen: For more information about the X.Org Foundation (the providers of the
xf86-input-hyperpen: X.Org implementation of the X Window System), see their website:
xf86-input-hyperpen:
xf86-input-hyperpen:
http://www.x.org
xf86-input-hyperpen:
PACKAGE NAME: xf86-input-jamstudio-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86-input-jamstudio: xf86-input-jamstudio
xf86-input-jamstudio:
xf86-input-jamstudio: xf86-input-jamstudio is part of X11.
xf86-input-jamstudio:
xf86-input-jamstudio: For more information about the X.Org Foundation (the providers of the
xf86-input-jamstudio: X.Org implementation of the X Window System), see their website:
xf86-input-jamstudio:
xf86-input-jamstudio:
http://www.x.org
xf86-input-jamstudio:
PACKAGE NAME: xf86-input-joystick-1.3.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 39 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
xf86-input-joystick: xf86-input-joystick
xf86-input-joystick:
xf86-input-joystick: xf86-input-joystick is part of X11.
xf86-input-joystick:
xf86-input-joystick: For more information about the X.Org Foundation (the providers of the
xf86-input-joystick: X.Org implementation of the X Window System), see their website:
xf86-input-joystick:
xf86-input-joystick:
http://www.x.org
xf86-input-joystick:
PACKAGE NAME: xf86-input-keyboard-1.2.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-input-keyboard: xf86-input-keyboard
xf86-input-keyboard:
xf86-input-keyboard: xf86-input-keyboard is part of X11.
xf86-input-keyboard:
xf86-input-keyboard: For more information about the X.Org Foundation (the providers of the
xf86-input-keyboard: X.Org implementation of the X Window System), see their website:
xf86-input-keyboard:
xf86-input-keyboard:
http://www.x.org
xf86-input-keyboard:
PACKAGE NAME: xf86-input-magellan-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86-input-magellan: xf86-input-magellan
xf86-input-magellan:
xf86-input-magellan: xf86-input-magellan is part of X11.
xf86-input-magellan:
xf86-input-magellan: For more information about the X.Org Foundation (the providers of the
xf86-input-magellan: X.Org implementation of the X Window System), see their website:
xf86-input-magellan:
xf86-input-magellan:
http://www.x.org
xf86-input-magellan:
PACKAGE NAME: xf86-input-magictouch-1.0.0.5-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86-input-magictouch: xf86-input-magictouch
xf86-input-magictouch:
xf86-input-magictouch: xf86-input-magictouch is part of X11.
xf86-input-magictouch:
xf86-input-magictouch: For more information about the X.Org Foundation (the providers of the
xf86-input-magictouch: X.Org implementation of the X Window System), see their website:
xf86-input-magictouch:
xf86-input-magictouch:
http://www.x.org
xf86-input-magictouch:
PACKAGE NAME: xf86-input-microtouch-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-microtouch: xf86-input-microtouch
xf86-input-microtouch:
xf86-input-microtouch: xf86-input-microtouch is part of X11.
xf86-input-microtouch:
xf86-input-microtouch: For more information about the X.Org Foundation (the providers of the
xf86-input-microtouch: X.Org implementation of the X Window System), see their website:
xf86-input-microtouch:
xf86-input-microtouch:
http://www.x.org
xf86-input-microtouch:
PACKAGE NAME: xf86-input-mouse-1.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 24 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-input-mouse: xf86-input-mouse
xf86-input-mouse:
xf86-input-mouse: xf86-input-mouse is part of X11.
xf86-input-mouse:
xf86-input-mouse: For more information about the X.Org Foundation (the providers of the
xf86-input-mouse: X.Org implementation of the X Window System), see their website:
xf86-input-mouse:
xf86-input-mouse:
http://www.x.org
xf86-input-mouse:
PACKAGE NAME: xf86-input-mutouch-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-mutouch: xf86-input-mutouch
xf86-input-mutouch:
xf86-input-mutouch: xf86-input-mutouch is part of X11.
xf86-input-mutouch:
xf86-input-mutouch: For more information about the X.Org Foundation (the providers of the
xf86-input-mutouch: X.Org implementation of the X Window System), see their website:
xf86-input-mutouch:
xf86-input-mutouch:
http://www.x.org
xf86-input-mutouch:
PACKAGE NAME: xf86-input-palmax-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-palmax: xf86-input-palmax
xf86-input-palmax:
xf86-input-palmax: xf86-input-palmax is part of X11.
xf86-input-palmax:
xf86-input-palmax: For more information about the X.Org Foundation (the providers of the
xf86-input-palmax: X.Org implementation of the X Window System), see their website:
xf86-input-palmax:
xf86-input-palmax:
http://www.x.org
xf86-input-palmax:
PACKAGE NAME: xf86-input-penmount-1.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-penmount: xf86-input-penmount
xf86-input-penmount:
xf86-input-penmount: xf86-input-penmount is part of X11.
xf86-input-penmount:
xf86-input-penmount: For more information about the X.Org Foundation (the providers of the
xf86-input-penmount: X.Org implementation of the X Window System), see their website:
xf86-input-penmount:
xf86-input-penmount:
http://www.x.org
xf86-input-penmount:
PACKAGE NAME: xf86-input-spaceorb-1.1.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86-input-spaceorb: xf86-input-spaceorb
xf86-input-spaceorb:
xf86-input-spaceorb: xf86-input-spaceorb is part of X11.
xf86-input-spaceorb:
xf86-input-spaceorb: For more information about the X.Org Foundation (the providers of the
xf86-input-spaceorb: X.Org implementation of the X Window System), see their website:
xf86-input-spaceorb:
xf86-input-spaceorb:
http://www.x.org
xf86-input-spaceorb:
PACKAGE NAME: xf86-input-summa-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-summa: xf86-input-summa
xf86-input-summa:
xf86-input-summa: xf86-input-summa is part of X11.
xf86-input-summa:
xf86-input-summa: For more information about the X.Org Foundation (the providers of the
xf86-input-summa: X.Org implementation of the X Window System), see their website:
xf86-input-summa:
xf86-input-summa:
http://www.x.org
xf86-input-summa:
PACKAGE NAME: xf86-input-tek4957-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-tek4957: xf86-input-tek4957
xf86-input-tek4957:
xf86-input-tek4957: xf86-input-tek4957 is part of X11.
xf86-input-tek4957:
xf86-input-tek4957: For more information about the X.Org Foundation (the providers of the
xf86-input-tek4957: X.Org implementation of the X Window System), see their website:
xf86-input-tek4957:
xf86-input-tek4957:
http://www.x.org
xf86-input-tek4957:
PACKAGE NAME: xf86-input-ur98-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-ur98: xf86-input-ur98
xf86-input-ur98:
xf86-input-ur98: xf86-input-ur98 is part of X11.
xf86-input-ur98:
xf86-input-ur98: For more information about the X.Org Foundation (the providers of the
xf86-input-ur98: X.Org implementation of the X Window System), see their website:
xf86-input-ur98:
xf86-input-ur98:
http://www.x.org
xf86-input-ur98:
PACKAGE NAME: xf86-input-vmmouse-12.4.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-input-vmmouse: xf86-input-vmmouse
xf86-input-vmmouse:
xf86-input-vmmouse: xf86-input-vmmouse is part of X11.
xf86-input-vmmouse:
xf86-input-vmmouse: For more information about the X.Org Foundation (the providers of the
xf86-input-vmmouse: X.Org implementation of the X Window System), see their website:
xf86-input-vmmouse:
xf86-input-vmmouse:
http://www.x.org
xf86-input-vmmouse:
PACKAGE NAME: xf86-video-apm-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 60 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
xf86-video-apm: xf86-video-apm
xf86-video-apm:
xf86-video-apm: xf86-video-apm is part of X11.
xf86-video-apm:
xf86-video-apm: For more information about the X.Org Foundation (the providers of the
xf86-video-apm: X.Org implementation of the X Window System), see their website:
xf86-video-apm:
xf86-video-apm:
http://www.x.org
xf86-video-apm:
PACKAGE NAME: xf86-video-ark-0.7.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-ark: xf86-video-ark
xf86-video-ark:
xf86-video-ark: xf86-video-ark is part of X11.
xf86-video-ark:
xf86-video-ark: For more information about the X.Org Foundation (the providers of the
xf86-video-ark: X.Org implementation of the X Window System), see their website:
xf86-video-ark:
xf86-video-ark:
http://www.x.org
xf86-video-ark:
PACKAGE NAME: xf86-video-ast-0.85.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xf86-video-ast: xf86-video-ast
xf86-video-ast:
xf86-video-ast: xf86-video-ast is part of X11.
xf86-video-ast:
xf86-video-ast: For more information about the X.Org Foundation (the providers of the
xf86-video-ast: X.Org implementation of the X Window System), see their website:
xf86-video-ast:
xf86-video-ast:
http://www.x.org
xf86-video-ast:
PACKAGE NAME: xf86-video-ati-6.8.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 337 K
PACKAGE SIZE (uncompressed): 810 K
PACKAGE DESCRIPTION:
xf86-video-ati: xf86-video-ati
xf86-video-ati:
xf86-video-ati: xf86-video-ati is part of X11.
xf86-video-ati:
xf86-video-ati: For more information about the X.Org Foundation (the providers of the
xf86-video-ati: X.Org implementation of the X Window System), see their website:
xf86-video-ati:
xf86-video-ati:
http://www.x.org
xf86-video-ati:
PACKAGE NAME: xf86-video-chips-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 67 K
PACKAGE SIZE (uncompressed): 160 K
PACKAGE DESCRIPTION:
xf86-video-chips: xf86-video-chips
xf86-video-chips:
xf86-video-chips: xf86-video-chips is part of X11.
xf86-video-chips:
xf86-video-chips: For more information about the X.Org Foundation (the providers of the
xf86-video-chips: X.Org implementation of the X Window System), see their website:
xf86-video-chips:
xf86-video-chips:
http://www.x.org
xf86-video-chips:
PACKAGE NAME: xf86-video-cirrus-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 34 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xf86-video-cirrus: xf86-video-cirrus
xf86-video-cirrus:
xf86-video-cirrus: xf86-video-cirrus is part of X11.
xf86-video-cirrus:
xf86-video-cirrus: For more information about the X.Org Foundation (the providers of the
xf86-video-cirrus: X.Org implementation of the X Window System), see their website:
xf86-video-cirrus:
xf86-video-cirrus:
http://www.x.org
xf86-video-cirrus:
PACKAGE NAME: xf86-video-cyrix-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-video-cyrix: xf86-video-cyrix
xf86-video-cyrix:
xf86-video-cyrix: xf86-video-cyrix is part of X11.
xf86-video-cyrix:
xf86-video-cyrix: For more information about the X.Org Foundation (the providers of the
xf86-video-cyrix: X.Org implementation of the X Window System), see their website:
xf86-video-cyrix:
xf86-video-cyrix:
http://www.x.org
xf86-video-cyrix:
PACKAGE NAME: xf86-video-dummy-0.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-dummy: xf86-video-dummy
xf86-video-dummy:
xf86-video-dummy: xf86-video-dummy is part of X11.
xf86-video-dummy:
xf86-video-dummy: For more information about the X.Org Foundation (the providers of the
xf86-video-dummy: X.Org implementation of the X Window System), see their website:
xf86-video-dummy:
xf86-video-dummy:
http://www.x.org
xf86-video-dummy:
PACKAGE NAME: xf86-video-fbdev-0.4.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-fbdev: xf86-video-fbdev
xf86-video-fbdev:
xf86-video-fbdev: xf86-video-fbdev is part of X11.
xf86-video-fbdev:
xf86-video-fbdev: For more information about the X.Org Foundation (the providers of the
xf86-video-fbdev: X.Org implementation of the X Window System), see their website:
xf86-video-fbdev:
xf86-video-fbdev:
http://www.x.org
xf86-video-fbdev:
PACKAGE NAME: xf86-video-geode-2.8.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 130 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
xf86-video-geode: xf86-video-geode (AMD Geode GX and LX video driver)
xf86-video-geode:
xf86-video-geode: xf86-video-geode is part of X11.
xf86-video-geode:
xf86-video-geode: For more information about the X.Org Foundation (the providers of the
xf86-video-geode: X.Org implementation of the X Window System), see their website:
xf86-video-geode:
xf86-video-geode:
http://www.x.org
xf86-video-geode:
PACKAGE NAME: xf86-video-glint-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 97 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
xf86-video-glint: xf86-video-glint
xf86-video-glint:
xf86-video-glint: xf86-video-glint is part of X11.
xf86-video-glint:
xf86-video-glint: For more information about the X.Org Foundation (the providers of the
xf86-video-glint: X.Org implementation of the X Window System), see their website:
xf86-video-glint:
xf86-video-glint:
http://www.x.org
xf86-video-glint:
PACKAGE NAME: xf86-video-i128-1.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 26 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
xf86-video-i128: xf86-video-i128
xf86-video-i128:
xf86-video-i128: xf86-video-i128 is part of X11.
xf86-video-i128:
xf86-video-i128: For more information about the X.Org Foundation (the providers of the
xf86-video-i128: X.Org implementation of the X Window System), see their website:
xf86-video-i128:
xf86-video-i128:
http://www.x.org
xf86-video-i128:
PACKAGE NAME: xf86-video-i740-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-video-i740: xf86-video-i740
xf86-video-i740:
xf86-video-i740: xf86-video-i740 is part of X11.
xf86-video-i740:
xf86-video-i740: For more information about the X.Org Foundation (the providers of the
xf86-video-i740: X.Org implementation of the X Window System), see their website:
xf86-video-i740:
xf86-video-i740:
http://www.x.org
xf86-video-i740:
PACKAGE NAME: xf86-video-i810-1.7.4-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 155 K
PACKAGE SIZE (uncompressed): 350 K
PACKAGE DESCRIPTION:
xf86-video-i810: xf86-video-i810
xf86-video-i810:
xf86-video-i810: xf86-video-i810 is part of X11.
xf86-video-i810:
xf86-video-i810: For more information about the X.Org Foundation (the providers of the
xf86-video-i810: X.Org implementation of the X Window System), see their website:
xf86-video-i810:
xf86-video-i810:
http://www.x.org
xf86-video-i810:
PACKAGE NAME: xf86-video-imstt-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-imstt: xf86-video-imstt
xf86-video-imstt:
xf86-video-imstt: xf86-video-imstt is part of X11.
xf86-video-imstt:
xf86-video-imstt: For more information about the X.Org Foundation (the providers of the
xf86-video-imstt: X.Org implementation of the X Window System), see their website:
xf86-video-imstt:
xf86-video-imstt:
http://www.x.org
xf86-video-imstt:
PACKAGE NAME: xf86-video-intel-2.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 170 K
PACKAGE SIZE (uncompressed): 410 K
PACKAGE DESCRIPTION:
xf86-video-intel: xf86-video-intel
xf86-video-intel:
xf86-video-intel: xf86-video-intel is part of X11.
xf86-video-intel:
xf86-video-intel: For more information about the X.Org Foundation (the providers of the
xf86-video-intel: X.Org implementation of the X Window System), see their website:
xf86-video-intel:
xf86-video-intel:
http://www.x.org
xf86-video-intel:
PACKAGE NAME: xf86-video-mga-1.4.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 80 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
xf86-video-mga: xf86-video-mga
xf86-video-mga:
xf86-video-mga: xf86-video-mga is part of X11.
xf86-video-mga:
xf86-video-mga: For more information about the X.Org Foundation (the providers of the
xf86-video-mga: X.Org implementation of the X Window System), see their website:
xf86-video-mga:
xf86-video-mga:
http://www.x.org
xf86-video-mga:
PACKAGE NAME: xf86-video-neomagic-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
xf86-video-neomagic: xf86-video-neomagic
xf86-video-neomagic:
xf86-video-neomagic: xf86-video-neomagic is part of X11.
xf86-video-neomagic:
xf86-video-neomagic: For more information about the X.Org Foundation (the providers of the
xf86-video-neomagic: X.Org implementation of the X Window System), see their website:
xf86-video-neomagic:
xf86-video-neomagic:
http://www.x.org
xf86-video-neomagic:
PACKAGE NAME: xf86-video-newport-0.2.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-video-newport: xf86-video-newport
xf86-video-newport:
xf86-video-newport: xf86-video-newport is part of X11.
xf86-video-newport:
xf86-video-newport: For more information about the X.Org Foundation (the providers of the
xf86-video-newport: X.Org implementation of the X Window System), see their website:
xf86-video-newport:
xf86-video-newport:
http://www.x.org
xf86-video-newport:
PACKAGE NAME: xf86-video-nsc-2.8.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 113 K
PACKAGE SIZE (uncompressed): 290 K
PACKAGE DESCRIPTION:
xf86-video-nsc: xf86-video-nsc
xf86-video-nsc:
xf86-video-nsc: xf86-video-nsc is part of X11.
xf86-video-nsc:
xf86-video-nsc: For more information about the X.Org Foundation (the providers of the
xf86-video-nsc: X.Org implementation of the X Window System), see their website:
xf86-video-nsc:
xf86-video-nsc:
http://www.x.org
xf86-video-nsc:
PACKAGE NAME: xf86-video-nv-2.1.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 77 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
xf86-video-nv: xf86-video-nv
xf86-video-nv:
xf86-video-nv: xf86-video-nv is part of X11.
xf86-video-nv:
xf86-video-nv: For more information about the X.Org Foundation (the providers of the
xf86-video-nv: X.Org implementation of the X Window System), see their website:
xf86-video-nv:
xf86-video-nv:
http://www.x.org
xf86-video-nv:
PACKAGE NAME: xf86-video-radeonhd-1.2.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 104 K
PACKAGE SIZE (uncompressed): 260 K
PACKAGE DESCRIPTION:
xf86-video-radeonhd: xf86-video-radeonhd (driver for AMD GPG (ATI) R5xx/R6xx chipsets)
xf86-video-radeonhd:
xf86-video-radeonhd: xf86-video-radeonhd is part of X11.
xf86-video-radeonhd:
xf86-video-radeonhd: For more information about the X.Org Foundation (the providers of the
xf86-video-radeonhd: X.Org implementation of the X Window System), see their website:
xf86-video-radeonhd:
xf86-video-radeonhd:
http://www.x.org
xf86-video-radeonhd:
PACKAGE NAME: xf86-video-rendition-4.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 43 K
PACKAGE SIZE (uncompressed): 120 K
PACKAGE DESCRIPTION:
xf86-video-rendition: xf86-video-rendition
xf86-video-rendition:
xf86-video-rendition: xf86-video-rendition is part of X11.
xf86-video-rendition:
xf86-video-rendition: For more information about the X.Org Foundation (the providers of the
xf86-video-rendition: X.Org implementation of the X Window System), see their website:
xf86-video-rendition:
xf86-video-rendition:
http://www.x.org
xf86-video-rendition:
PACKAGE NAME: xf86-video-s3-0.6.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 25 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-video-s3: xf86-video-s3
xf86-video-s3:
xf86-video-s3: xf86-video-s3 is part of X11.
xf86-video-s3:
xf86-video-s3: For more information about the X.Org Foundation (the providers of the
xf86-video-s3: X.Org implementation of the X Window System), see their website:
xf86-video-s3:
xf86-video-s3:
http://www.x.org
xf86-video-s3:
PACKAGE NAME: xf86-video-s3virge-1.10.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 36 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xf86-video-s3virge: xf86-video-s3virge
xf86-video-s3virge:
xf86-video-s3virge: xf86-video-s3virge is part of X11.
xf86-video-s3virge:
xf86-video-s3virge: For more information about the X.Org Foundation (the providers of the
xf86-video-s3virge: X.Org implementation of the X Window System), see their website:
xf86-video-s3virge:
xf86-video-s3virge:
http://www.x.org
xf86-video-s3virge:
PACKAGE NAME: xf86-video-savage-2.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 65 K
PACKAGE SIZE (uncompressed): 150 K
PACKAGE DESCRIPTION:
xf86-video-savage: xf86-video-savage
xf86-video-savage:
xf86-video-savage: xf86-video-savage is part of X11.
xf86-video-savage:
xf86-video-savage: For more information about the X.Org Foundation (the providers of the
xf86-video-savage: X.Org implementation of the X Window System), see their website:
xf86-video-savage:
xf86-video-savage:
http://www.x.org
xf86-video-savage:
PACKAGE NAME: xf86-video-siliconmotion-1.6.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 44 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
xf86-video-siliconmotion: xf86-video-siliconmotion
xf86-video-siliconmotion:
xf86-video-siliconmotion: xf86-video-siliconmotion is part of X11.
xf86-video-siliconmotion:
xf86-video-siliconmotion: For more information about the X.Org Foundation (the providers of the
xf86-video-siliconmotion: X.Org implementation of the X Window System), see their website:
xf86-video-siliconmotion:
xf86-video-siliconmotion:
http://www.x.org
xf86-video-siliconmotion:
PACKAGE NAME: xf86-video-sis-0.10.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 264 K
PACKAGE SIZE (uncompressed): 580 K
PACKAGE DESCRIPTION:
xf86-video-sis: xf86-video-sis
xf86-video-sis:
xf86-video-sis: xf86-video-sis is part of X11.
xf86-video-sis:
xf86-video-sis: For more information about the X.Org Foundation (the providers of the
xf86-video-sis: X.Org implementation of the X Window System), see their website:
xf86-video-sis:
xf86-video-sis:
http://www.x.org
xf86-video-sis:
PACKAGE NAME: xf86-video-sisusb-0.9.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 38 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xf86-video-sisusb: xf86-video-sisusb
xf86-video-sisusb:
xf86-video-sisusb: xf86-video-sisusb is part of X11.
xf86-video-sisusb:
xf86-video-sisusb: For more information about the X.Org Foundation (the providers of the
xf86-video-sisusb: X.Org implementation of the X Window System), see their website:
xf86-video-sisusb:
xf86-video-sisusb:
http://www.x.org
xf86-video-sisusb:
PACKAGE NAME: xf86-video-tdfx-1.4.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 33 K
PACKAGE SIZE (uncompressed): 80 K
PACKAGE DESCRIPTION:
xf86-video-tdfx: xf86-video-tdfx
xf86-video-tdfx:
xf86-video-tdfx: xf86-video-tdfx is part of X11.
xf86-video-tdfx:
xf86-video-tdfx: For more information about the X.Org Foundation (the providers of the
xf86-video-tdfx: X.Org implementation of the X Window System), see their website:
xf86-video-tdfx:
xf86-video-tdfx:
http://www.x.org
xf86-video-tdfx:
PACKAGE NAME: xf86-video-tga-1.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 23 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-video-tga: xf86-video-tga
xf86-video-tga:
xf86-video-tga: xf86-video-tga is part of X11.
xf86-video-tga:
xf86-video-tga: For more information about the X.Org Foundation (the providers of the
xf86-video-tga: X.Org implementation of the X Window System), see their website:
xf86-video-tga:
xf86-video-tga:
http://www.x.org
xf86-video-tga:
PACKAGE NAME: xf86-video-trident-1.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 67 K
PACKAGE SIZE (uncompressed): 170 K
PACKAGE DESCRIPTION:
xf86-video-trident: xf86-video-trident
xf86-video-trident:
xf86-video-trident: xf86-video-trident is part of X11.
xf86-video-trident:
xf86-video-trident: For more information about the X.Org Foundation (the providers of the
xf86-video-trident: X.Org implementation of the X Window System), see their website:
xf86-video-trident:
xf86-video-trident:
http://www.x.org
xf86-video-trident:
PACKAGE NAME: xf86-video-tseng-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 23 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-video-tseng: xf86-video-tseng
xf86-video-tseng:
xf86-video-tseng: xf86-video-tseng is part of X11.
xf86-video-tseng:
xf86-video-tseng: For more information about the X.Org Foundation (the providers of the
xf86-video-tseng: X.Org implementation of the X Window System), see their website:
xf86-video-tseng:
xf86-video-tseng:
http://www.x.org
xf86-video-tseng:
PACKAGE NAME: xf86-video-v4l-0.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-v4l: xf86-video-v4l
xf86-video-v4l:
xf86-video-v4l: xf86-video-v4l is part of X11.
xf86-video-v4l:
xf86-video-v4l: For more information about the X.Org Foundation (the providers of the
xf86-video-v4l: X.Org implementation of the X Window System), see their website:
xf86-video-v4l:
xf86-video-v4l:
http://www.x.org
xf86-video-v4l:
PACKAGE NAME: xf86-video-vesa-1.3.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 13 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-video-vesa: xf86-video-vesa
xf86-video-vesa:
xf86-video-vesa: xf86-video-vesa is part of X11.
xf86-video-vesa:
xf86-video-vesa: For more information about the X.Org Foundation (the providers of the
xf86-video-vesa: X.Org implementation of the X Window System), see their website:
xf86-video-vesa:
xf86-video-vesa:
http://www.x.org
xf86-video-vesa:
PACKAGE NAME: xf86-video-vga-4.1.0-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86-video-vga: xf86-video-vga
xf86-video-vga:
xf86-video-vga: xf86-video-vga is part of X11.
xf86-video-vga:
xf86-video-vga: For more information about the X.Org Foundation (the providers of the
xf86-video-vga: X.Org implementation of the X Window System), see their website:
xf86-video-vga:
xf86-video-vga:
http://www.x.org
xf86-video-vga:
PACKAGE NAME: xf86-video-via-0.2.2-i486-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 131 K
PACKAGE SIZE (uncompressed): 360 K
PACKAGE DESCRIPTION:
xf86-video-via: xf86-video-via
xf86-video-via:
xf86-video-via: xf86-video-via is part of X11.
xf86-video-via:
xf86-video-via: For more information about the X.Org Foundation (the providers of the
xf86-video-via: X.Org implementation of the X Window System), see their website:
xf86-video-via:
xf86-video-via:
http://www.x.org
xf86-video-via:
PACKAGE NAME: xf86-video-vmware-10.16.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 22 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xf86-video-vmware: xf86-video-vmware
xf86-video-vmware:
xf86-video-vmware: xf86-video-vmware is part of X11.
xf86-video-vmware:
xf86-video-vmware: For more information about the X.Org Foundation (the providers of the
xf86-video-vmware: X.Org implementation of the X Window System), see their website:
xf86-video-vmware:
xf86-video-vmware:
http://www.x.org
xf86-video-vmware:
PACKAGE NAME: xf86-video-voodoo-1.2.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86-video-voodoo: xf86-video-voodoo
xf86-video-voodoo:
xf86-video-voodoo: xf86-video-voodoo is part of X11.
xf86-video-voodoo:
xf86-video-voodoo: For more information about the X.Org Foundation (the providers of the
xf86-video-voodoo: X.Org implementation of the X Window System), see their website:
xf86-video-voodoo:
xf86-video-voodoo:
http://www.x.org
xf86-video-voodoo:
PACKAGE NAME: xf86bigfontproto-1.1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86bigfontproto: xf86bigfontproto
xf86bigfontproto:
xf86bigfontproto: xf86bigfontproto is part of X11.
xf86bigfontproto:
xf86bigfontproto: For more information about the X.Org Foundation (the providers of the
xf86bigfontproto: X.Org implementation of the X Window System), see their website:
xf86bigfontproto:
xf86bigfontproto:
http://www.x.org
xf86bigfontproto:
PACKAGE NAME: xf86dga-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86dga: xf86dga
xf86dga:
xf86dga: xf86dga is part of X11.
xf86dga:
xf86dga: For more information about the X.Org Foundation (the providers of the
xf86dga: X.Org implementation of the X Window System), see their website:
xf86dga:
xf86dga:
http://www.x.org
xf86dga:
PACKAGE NAME: xf86dgaproto-2.0.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xf86dgaproto: xf86dgaproto
xf86dgaproto:
xf86dgaproto: xf86dgaproto is part of X11.
xf86dgaproto:
xf86dgaproto: For more information about the X.Org Foundation (the providers of the
xf86dgaproto: X.Org implementation of the X Window System), see their website:
xf86dgaproto:
xf86dgaproto:
http://www.x.org
xf86dgaproto:
PACKAGE NAME: xf86driproto-2.0.3-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xf86driproto: xf86driproto
xf86driproto:
xf86driproto: xf86driproto is part of X11.
xf86driproto:
xf86driproto: For more information about the X.Org Foundation (the providers of the
xf86driproto: X.Org implementation of the X Window System), see their website:
xf86driproto:
xf86driproto:
http://www.x.org
xf86driproto:
PACKAGE NAME: xf86miscproto-0.9.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86miscproto: xf86miscproto
xf86miscproto:
xf86miscproto: xf86miscproto is part of X11.
xf86miscproto:
xf86miscproto: For more information about the X.Org Foundation (the providers of the
xf86miscproto: X.Org implementation of the X Window System), see their website:
xf86miscproto:
xf86miscproto:
http://www.x.org
xf86miscproto:
PACKAGE NAME: xf86rushproto-1.1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xf86rushproto: xf86rushproto
xf86rushproto:
xf86rushproto: xf86rushproto is part of X11.
xf86rushproto:
xf86rushproto: For more information about the X.Org Foundation (the providers of the
xf86rushproto: X.Org implementation of the X Window System), see their website:
xf86rushproto:
xf86rushproto:
http://www.x.org
xf86rushproto:
PACKAGE NAME: xf86vidmodeproto-2.2.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xf86vidmodeproto: xf86vidmodeproto
xf86vidmodeproto:
xf86vidmodeproto: xf86vidmodeproto is part of X11.
xf86vidmodeproto:
xf86vidmodeproto: For more information about the X.Org Foundation (the providers of the
xf86vidmodeproto: X.Org implementation of the X Window System), see their website:
xf86vidmodeproto:
xf86vidmodeproto:
http://www.x.org
xf86vidmodeproto:
PACKAGE NAME: xfce-4.4.2-i486-4.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 20647 K
PACKAGE SIZE (uncompressed): 52890 K
PACKAGE DESCRIPTION:
xfce: xfce (a fast and lightweight desktop environment for X)
xfce:
xfce: Xfce is a fast and lightweight desktop environment that is both
xfce: visually appealing and easy to use.
xfce:
xfce: For more information, see:
http://www.xfce.org
xfce:
xfce: Xfce was developed by Olivier Fourdan.
xfce:
PACKAGE NAME: xfd-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xfd: xfd
xfd:
xfd: xfd is part of X11.
xfd:
xfd: For more information about the X.Org Foundation (the providers of the
xfd: X.Org implementation of the X Window System), see their website:
xfd:
xfd:
http://www.x.org
xfd:
PACKAGE NAME: xfig-3.2.4-i486-3.tgz
PACKAGE LOCATION: ./slackware/t
PACKAGE SIZE (compressed): 3584 K
PACKAGE SIZE (uncompressed): 9770 K
PACKAGE DESCRIPTION:
xfig: xfig (interactive drawing tool)
xfig:
xfig: This package contains the binary for xfig, an interactive drawing tool
xfig: under X. Xfig can create fig, epsf, and LaTeX files with various
xfig: options. You also have to install the transfig package (transfig.tgz)
xfig: so that xfig can export fig files as epsf and LaTeX files. This
xfig: package also contains a set of basic examples of fig files.
xfig:
PACKAGE NAME: xfindproxy-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xfindproxy: xfindproxy
xfindproxy:
xfindproxy: xfindproxy is part of X11.
xfindproxy:
xfindproxy: For more information about the X.Org Foundation (the providers of the
xfindproxy: X.Org implementation of the X Window System), see their website:
xfindproxy:
xfindproxy:
http://www.x.org
xfindproxy:
PACKAGE NAME: xfontsel-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xfontsel: xfontsel
xfontsel:
xfontsel: xfontsel is part of X11.
xfontsel:
xfontsel: For more information about the X.Org Foundation (the providers of the
xfontsel: X.Org implementation of the X Window System), see their website:
xfontsel:
xfontsel:
http://www.x.org
xfontsel:
PACKAGE NAME: xfractint-20.04p04-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 896 K
PACKAGE SIZE (uncompressed): 2340 K
PACKAGE DESCRIPTION:
xfractint: xfractint (fractal generation program)
xfractint:
xfractint: Xfractint draws a wide variety of fractals. Xfractint is a port of the
xfractint: DOS program Fractint.
xfractint:
xfractint: The primary original authors of Fractint are Bert Tyler, Timothy
xfractint: Wegner, Mark Peterson, and Pieter Branderhorst. Fractint was ported
xfractint: to X by Ken Shirriff.
xfractint:
PACKAGE NAME: xfs-1.0.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 49 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
xfs: xfs
xfs:
xfs: xfs is part of X11.
xfs:
xfs: For more information about the X.Org Foundation (the providers of the
xfs: X.Org implementation of the X Window System), see their website:
xfs:
xfs:
http://www.x.org
xfs:
PACKAGE NAME: xfsdump-2.2.48_1-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 377 K
PACKAGE SIZE (uncompressed): 840 K
PACKAGE DESCRIPTION:
xfsdump: xfsdump (backup tools for the XFS filesystem)
xfsdump:
xfsdump: The xfsdump package contains the xfsdump and xfsrestore utilities for
xfsdump: backing up and restoring XFS partitions. xfsdump examines files in a
xfsdump: filesystem, determines which need to be backed up, and copies those
xfsdump: files to a specified disk, tape or other storage medium. xfsrestore
xfsdump: performs the inverse function of xfsdump; it can restore a full
xfsdump: or incremental backup of a filesystem.
xfsdump:
PACKAGE NAME: xfsinfo-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xfsinfo: xfsinfo
xfsinfo:
xfsinfo: xfsinfo is part of X11.
xfsinfo:
xfsinfo: For more information about the X.Org Foundation (the providers of the
xfsinfo: X.Org implementation of the X Window System), see their website:
xfsinfo:
xfsinfo:
http://www.x.org
xfsinfo:
PACKAGE NAME: xfsprogs-2.9.7_1-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 1617 K
PACKAGE SIZE (uncompressed): 4040 K
PACKAGE DESCRIPTION:
xfsprogs: xfsprogs (tools to use the XFS filesystem)
xfsprogs:
xfsprogs: XFS is a high performance journaling filesystem which originated
xfsprogs: on the SGI IRIX platform. It is completely multi-threaded, can
xfsprogs: support large files and large filesystems, extended attributes,
xfsprogs: variable block sizes, is extent based, and makes extensive use of
xfsprogs: Btrees (directories, extents, free space) to aid both performance
xfsprogs: and scalability.
xfsprogs:
PACKAGE NAME: xfwp-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 21 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xfwp: xfwp
xfwp:
xfwp: xfwp is part of X11.
xfwp:
xfwp: For more information about the X.Org Foundation (the providers of the
xfwp: X.Org implementation of the X Window System), see their website:
xfwp:
xfwp:
http://www.x.org
xfwp:
PACKAGE NAME: xgames-0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 106 K
PACKAGE SIZE (uncompressed): 250 K
PACKAGE DESCRIPTION:
xgames: xgames (small X games collection)
xgames:
xgames: A few small and historic games and toys for X.
xgames:
xgames: Includes maze, spider, xcolormap, xlander, xminesweep, xroach, xsnow.
xgames:
PACKAGE NAME: xgamma-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xgamma: xgamma
xgamma:
xgamma: xgamma is part of X11.
xgamma:
xgamma: For more information about the X.Org Foundation (the providers of the
xgamma: X.Org implementation of the X Window System), see their website:
xgamma:
xgamma:
http://www.x.org
xgamma:
PACKAGE NAME: xgc-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 23 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xgc: xgc
xgc:
xgc: xgc is part of X11.
xgc:
xgc: For more information about the X.Org Foundation (the providers of the
xgc: X.Org implementation of the X Window System), see their website:
xgc:
xgc:
http://www.x.org
xgc:
PACKAGE NAME: xhost-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 9 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xhost: xhost
xhost:
xhost: xhost is part of X11.
xhost:
xhost: For more information about the X.Org Foundation (the providers of the
xhost: X.Org implementation of the X Window System), see their website:
xhost:
xhost:
http://www.x.org
xhost:
PACKAGE NAME: xine-lib-1.1.11.1-i686-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 4662 K
PACKAGE SIZE (uncompressed): 10010 K
PACKAGE DESCRIPTION:
xine-lib: xine-lib (xine multimedia playback engine libraries)
xine-lib:
xine-lib: xine-lib is a free (GPL licensed) high-performance multimedia
xine-lib: playback engine. The xine shared libraries are used by xine-ui (and
xine-lib: other media players and multimedia applications) for smooth video
xine-lib: processing and playback of multimedia streams such as movies, radio
xine-lib: and TV network streams, DVDs, and VCDs.
xine-lib:
PACKAGE NAME: xine-ui-0.99.5-i686-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1500 K
PACKAGE SIZE (uncompressed): 3050 K
PACKAGE DESCRIPTION:
xine-ui: xine-ui (xine multimedia playback engine user interface)
xine-ui:
xine-ui: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs,
xine-ui: multimedia files, and multimedia streamed over a network.
xine-ui:
xine-ui: The xine-ui package contains the graphical user interface for the
xine-ui: xine multimedia player.
xine-ui:
PACKAGE NAME: xineramaproto-1.1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xineramaproto: xineramaproto
xineramaproto:
xineramaproto: xineramaproto is part of X11.
xineramaproto:
xineramaproto: For more information about the X.Org Foundation (the providers of the
xineramaproto: X.Org implementation of the X Window System), see their website:
xineramaproto:
xineramaproto:
http://www.x.org
xineramaproto:
PACKAGE NAME: xinit-1.0.8-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xinit: xinit
xinit:
xinit: xinit is part of X11.
xinit:
xinit: For more information about the X.Org Foundation (the providers of the
xinit: X.Org implementation of the X Window System), see their website:
xinit:
xinit:
http://www.x.org
xinit:
PACKAGE NAME: xinput-1.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xinput: xinput
xinput:
xinput: xinput is a utility to configure and test XInput devices. It wasn't
xinput: originally designed to be the primary tool for doing this but it's
xinput: still pretty much the only program out there for doing it. :-)
xinput:
xinput: xinput is part of X11.
xinput:
xinput: For more information about the X.Org Foundation (the providers of the
xinput: X.Org implementation of the X Window System), see their website:
xinput:
http://www.x.org
PACKAGE NAME: xkbcomp-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 79 K
PACKAGE SIZE (uncompressed): 180 K
PACKAGE DESCRIPTION:
xkbcomp: xkbcomp
xkbcomp:
xkbcomp: xkbcomp is part of X11.
xkbcomp:
xkbcomp: For more information about the X.Org Foundation (the providers of the
xkbcomp: X.Org implementation of the X Window System), see their website:
xkbcomp:
xkbcomp:
http://www.x.org
xkbcomp:
PACKAGE NAME: xkbevd-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xkbevd: xkbevd
xkbevd:
xkbevd: xkbevd is part of X11.
xkbevd:
xkbevd: For more information about the X.Org Foundation (the providers of the
xkbevd: X.Org implementation of the X Window System), see their website:
xkbevd:
xkbevd:
http://www.x.org
xkbevd:
PACKAGE NAME: xkbprint-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 48 K
PACKAGE SIZE (uncompressed): 100 K
PACKAGE DESCRIPTION:
xkbprint: xkbprint
xkbprint:
xkbprint: xkbprint is part of X11.
xkbprint:
xkbprint: For more information about the X.Org Foundation (the providers of the
xkbprint: X.Org implementation of the X Window System), see their website:
xkbprint:
xkbprint:
http://www.x.org
xkbprint:
PACKAGE NAME: xkbutils-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xkbutils: xkbutils
xkbutils:
xkbutils: xkbutils is part of X11.
xkbutils:
xkbutils: For more information about the X.Org Foundation (the providers of the
xkbutils: X.Org implementation of the X Window System), see their website:
xkbutils:
xkbutils:
http://www.x.org
xkbutils:
PACKAGE NAME: xkeyboard-config-0.9-noarch-2.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 332 K
PACKAGE SIZE (uncompressed): 2610 K
PACKAGE DESCRIPTION:
xkeyboard-config: xkeyboard-config
xkeyboard-config:
xkeyboard-config: xkeyboard-config is part of X11.
xkeyboard-config:
xkeyboard-config: For more information about the X.Org Foundation (the providers of the
xkeyboard-config: X.Org implementation of the X Window System), see their website:
xkeyboard-config:
xkeyboard-config:
http://www.x.org
xkeyboard-config:
PACKAGE NAME: xkill-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 7 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xkill: xkill
xkill:
xkill: xkill is part of X11.
xkill:
xkill: For more information about the X.Org Foundation (the providers of the
xkill: X.Org implementation of the X Window System), see their website:
xkill:
xkill:
http://www.x.org
xkill:
PACKAGE NAME: xload-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xload: xload
xload:
xload: xload is part of X11.
xload:
xload: For more information about the X.Org Foundation (the providers of the
xload: X.Org implementation of the X Window System), see their website:
xload:
xload:
http://www.x.org
xload:
PACKAGE NAME: xlockmore-5.23-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 1094 K
PACKAGE SIZE (uncompressed): 2920 K
PACKAGE DESCRIPTION:
xlockmore: xlockmore (screen locker for X)
xlockmore:
xlockmore: Patrick J. Naughton's xlock screensaver/locker for X, with many
xlockmore: more modes added by David A. Bagley.
xlockmore:
xlockmore: The 'Bob' bitmap has been included especially for Slackware, as well
xlockmore: as a Linux penguin logo. (NOTE: the image of J. R. "Bob" Dobbs is a
xlockmore: registered trademark of The Subgenius Foundation, used by permission)
xlockmore:
PACKAGE NAME: xlogo-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xlogo: xlogo
xlogo:
xlogo: xlogo is part of X11.
xlogo:
xlogo: For more information about the X.Org Foundation (the providers of the
xlogo: X.Org implementation of the X Window System), see their website:
xlogo:
xlogo:
http://www.x.org
xlogo:
PACKAGE NAME: xlsatoms-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xlsatoms: xlsatoms
xlsatoms:
xlsatoms: xlsatoms is part of X11.
xlsatoms:
xlsatoms: For more information about the X.Org Foundation (the providers of the
xlsatoms: X.Org implementation of the X Window System), see their website:
xlsatoms:
xlsatoms:
http://www.x.org
xlsatoms:
PACKAGE NAME: xlsclients-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xlsclients: xlsclients
xlsclients:
xlsclients: xlsclients is part of X11.
xlsclients:
xlsclients: For more information about the X.Org Foundation (the providers of the
xlsclients: X.Org implementation of the X Window System), see their website:
xlsclients:
xlsclients:
http://www.x.org
xlsclients:
PACKAGE NAME: xlsfonts-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 11 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xlsfonts: xlsfonts
xlsfonts:
xlsfonts: xlsfonts is part of X11.
xlsfonts:
xlsfonts: For more information about the X.Org Foundation (the providers of the
xlsfonts: X.Org implementation of the X Window System), see their website:
xlsfonts:
xlsfonts:
http://www.x.org
xlsfonts:
PACKAGE NAME: xmag-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 16 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xmag: xmag
xmag:
xmag: xmag is part of X11.
xmag:
xmag: For more information about the X.Org Foundation (the providers of the
xmag: X.Org implementation of the X Window System), see their website:
xmag:
xmag:
http://www.x.org
xmag:
PACKAGE NAME: xman-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 37 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xman: xman
xman:
xman: xman is part of X11.
xman:
xman: For more information about the X.Org Foundation (the providers of the
xman: X.Org implementation of the X Window System), see their website:
xman:
xman:
http://www.x.org
xman:
PACKAGE NAME: xmessage-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 10 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xmessage: xmessage
xmessage:
xmessage: xmessage is part of X11.
xmessage:
xmessage: For more information about the X.Org Foundation (the providers of the
xmessage: X.Org implementation of the X Window System), see their website:
xmessage:
xmessage:
http://www.x.org
xmessage:
PACKAGE NAME: xmh-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 67 K
PACKAGE SIZE (uncompressed): 130 K
PACKAGE DESCRIPTION:
xmh: xmh
xmh:
xmh: xmh is part of X11.
xmh:
xmh: For more information about the X.Org Foundation (the providers of the
xmh: X.Org implementation of the X Window System), see their website:
xmh:
xmh:
http://www.x.org
xmh:
PACKAGE NAME: xmodmap-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xmodmap: xmodmap
xmodmap:
xmodmap: xmodmap is part of X11.
xmodmap:
xmodmap: For more information about the X.Org Foundation (the providers of the
xmodmap: X.Org implementation of the X Window System), see their website:
xmodmap:
xmodmap:
http://www.x.org
xmodmap:
PACKAGE NAME: xmore-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xmore: xmore
xmore:
xmore: xmore is part of X11.
xmore:
xmore: For more information about the X.Org Foundation (the providers of the
xmore: X.Org implementation of the X Window System), see their website:
xmore:
xmore:
http://www.x.org
xmore:
PACKAGE NAME: xorg-cf-files-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 248 K
PACKAGE SIZE (uncompressed): 1230 K
PACKAGE DESCRIPTION:
xorg-cf-files: xorg-cf-files
xorg-cf-files:
xorg-cf-files: xorg-cf-files is part of X11.
xorg-cf-files:
xorg-cf-files: For more information about the X.Org Foundation (the providers of the
xorg-cf-files: X.Org implementation of the X Window System), see their website:
xorg-cf-files:
xorg-cf-files:
http://www.x.org
xorg-cf-files:
PACKAGE NAME: xorg-docs-1.4-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5734 K
PACKAGE SIZE (uncompressed): 7260 K
PACKAGE DESCRIPTION:
xorg-docs: xorg-docs
xorg-docs:
xorg-docs: xorg-docs is part of X11.
xorg-docs:
xorg-docs: For more information about the X.Org Foundation (the providers of the
xorg-docs: X.Org implementation of the X Window System), see their website:
xorg-docs:
xorg-docs:
http://www.x.org
xorg-docs:
PACKAGE NAME: xorg-server-1.4.0.90-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3355 K
PACKAGE SIZE (uncompressed): 9560 K
PACKAGE DESCRIPTION:
xorg-server: xorg-server (The Xorg server, the core of the X Window System)
xorg-server:
xorg-server: Xorg is a full featured X server that was originally designed for UNIX
xorg-server: and UNIX-like operating systems running on Intel x86 hardware. It now
xorg-server: runs on a wider range of hardware and OS platforms. This work was
xorg-server: derived by the X.Org Foundation from the XFree86 Project's XFree86
xorg-server: 4.4rc2 release. The XFree86 release was originally derived from X386
xorg-server: 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics
xorg-server: Consulting Service.
xorg-server:
xorg-server: The home page for the X project is:
http://www.x.org
PACKAGE NAME: xorg-server-xnest-1.4.0.90-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1332 K
PACKAGE SIZE (uncompressed): 3390 K
PACKAGE DESCRIPTION:
xorg-server-xnest: xorg-server-xnest (a nested X server)
xorg-server-xnest:
xorg-server-xnest: Xnest is an experimental nested server for X that acts as both a
xorg-server-xnest: client and a server. Xnest is a client of the real server which
xorg-server-xnest: manages windows and graphics requests on its behalf. Xnest is a
xorg-server-xnest: server to its own clients. Xnest manages windows and graphics
xorg-server-xnest: requests on their behalf. To these clients Xnest appears to be a
xorg-server-xnest: conventional server.
xorg-server-xnest:
PACKAGE NAME: xorg-server-xvfb-1.4.0.90-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1437 K
PACKAGE SIZE (uncompressed): 3600 K
PACKAGE DESCRIPTION:
xorg-server-xvfb: xorg-server-xvfb (virtual framebuffer X server)
xorg-server-xvfb:
xorg-server-xvfb: Xvfb is an X server that can run on machines with no display hardware
xorg-server-xvfb: and no physical input devices. It emulates a dumb framebuffer using
xorg-server-xvfb: virtual memory. The primary use of this server is intended to be
xorg-server-xvfb: server testing. The mfb or cfb code for any depth can be exercised
xorg-server-xvfb: with this server without the need for real hardware that supports the
xorg-server-xvfb: desired depths. A secondary use is testing clients against unusual
xorg-server-xvfb: depths and screen configurations.
xorg-server-xvfb:
PACKAGE NAME: xorg-sgml-doctools-1.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 1 K
PACKAGE SIZE (uncompressed): 10 K
PACKAGE DESCRIPTION:
xorg-sgml-doctools: xorg-sgml-doctools
xorg-sgml-doctools:
xorg-sgml-doctools: xorg-sgml-doctools is part of X11.
xorg-sgml-doctools:
xorg-sgml-doctools: For more information about the X.Org Foundation (the providers of the
xorg-sgml-doctools: X.Org implementation of the X Window System), see their website:
xorg-sgml-doctools:
xorg-sgml-doctools:
http://www.x.org
xorg-sgml-doctools:
PACKAGE NAME: xpaint-2.7.8.1-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 355 K
PACKAGE SIZE (uncompressed): 1140 K
PACKAGE DESCRIPTION:
xpaint: xpaint (simple X paint program)
xpaint:
xpaint: XPaint is a versatile bitmap/pixmap editing tool with a feature set
xpaint: similar to MacPaint.
xpaint:
xpaint: The short features list:
xpaint: Brushes, Spray paint, Pencil, Lines, Arcs, Pattern Fill, Text,
xpaint: Boxes, Circles, Polygons.
xpaint: Works on multiple images simultaneously. Cut/Copy/Paste between all
xpaint: active images. Fatbits/Zoom on the image windows.
xpaint:
PACKAGE NAME: xpdf-3.02pl2-i486-3.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 3097 K
PACKAGE SIZE (uncompressed): 8650 K
PACKAGE DESCRIPTION:
xpdf: xpdf (PDF viewer for X)
xpdf:
xpdf: Xpdf is a viewer for Portable Document Format (PDF) files.
xpdf:
xpdf: xpdf was written by Derek B. Noonburg.
xpdf:
xpdf: The xpdf package requires the t1lib package to render Type 1 fonts.
xpdf:
PACKAGE NAME: xphelloworld-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xphelloworld: xphelloworld
xphelloworld:
xphelloworld: xphelloworld is part of X11.
xphelloworld:
xphelloworld: For more information about the X.Org Foundation (the providers of the
xphelloworld: X.Org implementation of the X Window System), see their website:
xphelloworld:
xphelloworld:
http://www.x.org
xphelloworld:
PACKAGE NAME: xplsprinters-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xplsprinters: xplsprinters
xplsprinters:
xplsprinters: xplsprinters is part of X11.
xplsprinters:
xplsprinters: For more information about the X.Org Foundation (the providers of the
xplsprinters: X.Org implementation of the X Window System), see their website:
xplsprinters:
xplsprinters:
http://www.x.org
xplsprinters:
PACKAGE NAME: xpr-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 30 K
PACKAGE SIZE (uncompressed): 60 K
PACKAGE DESCRIPTION:
xpr: xpr
xpr:
xpr: xpr is part of X11.
xpr:
xpr: For more information about the X.Org Foundation (the providers of the
xpr: X.Org implementation of the X Window System), see their website:
xpr:
xpr:
http://www.x.org
xpr:
PACKAGE NAME: xprehashprinterlist-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xprehashprinterlist: xprehashprinterlist
xprehashprinterlist:
xprehashprinterlist: xprehashprinterlist is part of X11.
xprehashprinterlist:
xprehashprinterlist: For more information about the X.Org Foundation (the providers of the
xprehashprinterlist: X.Org implementation of the X Window System), see their website:
xprehashprinterlist:
xprehashprinterlist:
http://www.x.org
xprehashprinterlist:
PACKAGE NAME: xprop-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 19 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xprop: xprop
xprop:
xprop: xprop is part of X11.
xprop:
xprop: For more information about the X.Org Foundation (the providers of the
xprop: X.Org implementation of the X Window System), see their website:
xprop:
xprop:
http://www.x.org
xprop:
PACKAGE NAME: xproto-7.0.12-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 75 K
PACKAGE SIZE (uncompressed): 400 K
PACKAGE DESCRIPTION:
xproto: xproto
xproto:
xproto: xproto is part of X11.
xproto:
xproto: For more information about the X.Org Foundation (the providers of the
xproto: X.Org implementation of the X Window System), see their website:
xproto:
xproto:
http://www.x.org
xproto:
PACKAGE NAME: xproxymanagementprotocol-1.0.2-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 2 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xproxymanagementprotocol: xproxymanagementprotocol
xproxymanagementprotocol:
xproxymanagementprotocol: xproxymanagementprotocol is part of X11.
xproxymanagementprotocol:
xproxymanagementprotocol: For more information about the X.Org Foundation (the providers of the
xproxymanagementprotocol: X.Org implementation of the X Window System), see their website:
xproxymanagementprotocol:
xproxymanagementprotocol:
http://www.x.org
xproxymanagementprotocol:
PACKAGE NAME: xrandr-1.2.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 20 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xrandr: xrandr
xrandr:
xrandr: xrandr is part of X11.
xrandr:
xrandr: For more information about the X.Org Foundation (the providers of the
xrandr: X.Org implementation of the X Window System), see their website:
xrandr:
xrandr:
http://www.x.org
xrandr:
PACKAGE NAME: xrdb-1.0.5-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 15 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xrdb: xrdb
xrdb:
xrdb: xrdb is part of X11.
xrdb:
xrdb: For more information about the X.Org Foundation (the providers of the
xrdb: X.Org implementation of the X Window System), see their website:
xrdb:
xrdb:
http://www.x.org
xrdb:
PACKAGE NAME: xrefresh-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xrefresh: xrefresh
xrefresh:
xrefresh: xrefresh is part of X11.
xrefresh:
xrefresh: For more information about the X.Org Foundation (the providers of the
xrefresh: X.Org implementation of the X Window System), see their website:
xrefresh:
xrefresh:
http://www.x.org
xrefresh:
PACKAGE NAME: xrx-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 38 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xrx: xrx
xrx:
xrx: xrx is part of X11.
xrx:
xrx: For more information about the X.Org Foundation (the providers of the
xrx: X.Org implementation of the X Window System), see their website:
xrx:
xrx:
http://www.x.org
xrx:
PACKAGE NAME: xsane-0.994-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 2088 K
PACKAGE SIZE (uncompressed): 5250 K
PACKAGE DESCRIPTION:
xsane: xsane (Graphical frontend to SANE, Scanner Access Now Easy)
xsane:
xsane: xsane provides a graphical user-interface to control an image
xsane: acquisition device such as a flatbed scanner. It allows previewing
xsane: and scanning individual images and can be invoked either directly
xsane: from the command-line or through the GIMP image manipulation program.
xsane:
xsane: xsane accesses image acquisition devices through the SANE (Scanner
xsane: Access Now Easy) interface.
xsane:
PACKAGE NAME: xscreensaver-5.05-i486-1.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 7599 K
PACKAGE SIZE (uncompressed): 17180 K
PACKAGE DESCRIPTION:
xscreensaver: xscreensaver (a screen saver and locker for X)
xscreensaver:
xscreensaver: A modular screen saver and locker for the X Window System. Highly
xscreensaver: customizable: allows the use of any program that can draw on the
xscreensaver: root window as a display mode. More than 100 display modes are
xscreensaver: included in this package.
xscreensaver:
PACKAGE NAME: xset-1.0.4-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xset: xset
xset:
xset: xset is part of X11.
xset:
xset: For more information about the X.Org Foundation (the providers of the
xset: X.Org implementation of the X Window System), see their website:
xset:
xset:
http://www.x.org
xset:
PACKAGE NAME: xsetmode-1.0.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 3 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xsetmode: xsetmode
xsetmode:
xsetmode: xsetmode is part of X11.
xsetmode:
xsetmode: For more information about the X.Org Foundation (the providers of the
xsetmode: X.Org implementation of the X Window System), see their website:
xsetmode:
xsetmode:
http://www.x.org
xsetmode:
PACKAGE NAME: xsetpointer-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 4 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xsetpointer: xsetpointer
xsetpointer:
xsetpointer: xsetpointer is part of X11.
xsetpointer:
xsetpointer: For more information about the X.Org Foundation (the providers of the
xsetpointer: X.Org implementation of the X Window System), see their website:
xsetpointer:
xsetpointer:
http://www.x.org
xsetpointer:
PACKAGE NAME: xsetroot-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 8 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xsetroot: xsetroot
xsetroot:
xsetroot: xsetroot is part of X11.
xsetroot:
xsetroot: For more information about the X.Org Foundation (the providers of the
xsetroot: X.Org implementation of the X Window System), see their website:
xsetroot:
xsetroot:
http://www.x.org
xsetroot:
PACKAGE NAME: xsm-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 40 K
PACKAGE SIZE (uncompressed): 90 K
PACKAGE DESCRIPTION:
xsm: xsm
xsm:
xsm: xsm is part of X11.
xsm:
xsm: For more information about the X.Org Foundation (the providers of the
xsm: X.Org implementation of the X Window System), see their website:
xsm:
xsm:
http://www.x.org
xsm:
PACKAGE NAME: xstdcmap-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 6 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xstdcmap: xstdcmap
xstdcmap:
xstdcmap: xstdcmap is part of X11.
xstdcmap:
xstdcmap: For more information about the X.Org Foundation (the providers of the
xstdcmap: X.Org implementation of the X Window System), see their website:
xstdcmap:
xstdcmap:
http://www.x.org
xstdcmap:
PACKAGE NAME: xterm-232-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 220 K
PACKAGE SIZE (uncompressed): 460 K
PACKAGE DESCRIPTION:
xterm: xterm (terminal emulator for X)
xterm:
xterm: The xterm program is a terminal emulator for the X Window System.
xterm: It provides DEC VT102/VT220 (VTxxx) and Tektronix 4014 compatible
xterm: terminals for programs that cannot use the window system directly.
xterm:
PACKAGE NAME: xtrans-1.1-noarch-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 57 K
PACKAGE SIZE (uncompressed): 300 K
PACKAGE DESCRIPTION:
xtrans: xtrans
xtrans:
xtrans: xtrans is part of X11.
xtrans:
xtrans: For more information about the X.Org Foundation (the providers of the
xtrans: X.Org implementation of the X Window System), see their website:
xtrans:
xtrans:
http://www.x.org
xtrans:
PACKAGE NAME: xtrap-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 18 K
PACKAGE SIZE (uncompressed): 70 K
PACKAGE DESCRIPTION:
xtrap: xtrap
xtrap:
xtrap: xtrap is part of X11.
xtrap:
xtrap: For more information about the X.Org Foundation (the providers of the
xtrap: X.Org implementation of the X Window System), see their website:
xtrap:
xtrap:
http://www.x.org
xtrap:
PACKAGE NAME: xv-3.10a-i486-5.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 938 K
PACKAGE SIZE (uncompressed): 1530 K
PACKAGE DESCRIPTION:
xv: xv (John Bradley's interactive image viewer)
xv:
xv: xv is an interactive image manipulation program.
xv:
xv: NOTICE: This program is unregistered shareware. Please read the
xv: license information included.
xv:
PACKAGE NAME: xvidtune-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 17 K
PACKAGE SIZE (uncompressed): 50 K
PACKAGE DESCRIPTION:
xvidtune: xvidtune
xvidtune:
xvidtune: xvidtune is part of X11.
xvidtune:
xvidtune: For more information about the X.Org Foundation (the providers of the
xvidtune: X.Org implementation of the X Window System), see their website:
xvidtune:
xvidtune:
http://www.x.org
xvidtune:
PACKAGE NAME: xvinfo-1.0.2-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 5 K
PACKAGE SIZE (uncompressed): 20 K
PACKAGE DESCRIPTION:
xvinfo: xvinfo
xvinfo:
xvinfo: xvinfo is part of X11.
xvinfo:
xvinfo: For more information about the X.Org Foundation (the providers of the
xvinfo: X.Org implementation of the X Window System), see their website:
xvinfo:
xvinfo:
http://www.x.org
xvinfo:
PACKAGE NAME: xwd-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xwd: xwd
xwd:
xwd: xwd is part of X11.
xwd:
xwd: For more information about the X.Org Foundation (the providers of the
xwd: X.Org implementation of the X Window System), see their website:
xwd:
xwd:
http://www.x.org
xwd:
PACKAGE NAME: xwininfo-1.0.3-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 40 K
PACKAGE DESCRIPTION:
xwininfo: xwininfo
xwininfo:
xwininfo: xwininfo is part of X11.
xwininfo:
xwininfo: For more information about the X.Org Foundation (the providers of the
xwininfo: X.Org implementation of the X Window System), see their website:
xwininfo:
xwininfo:
http://www.x.org
xwininfo:
PACKAGE NAME: xwud-1.0.1-i486-1.tgz
PACKAGE LOCATION: ./slackware/x
PACKAGE SIZE (compressed): 14 K
PACKAGE SIZE (uncompressed): 30 K
PACKAGE DESCRIPTION:
xwud: xwud
xwud:
xwud: xwud is part of X11.
xwud:
xwud: For more information about the X.Org Foundation (the providers of the
xwud: X.Org implementation of the X Window System), see their website:
xwud:
xwud:
http://www.x.org
xwud:
PACKAGE NAME: xxgdb-1.12-i486-2.tgz
PACKAGE LOCATION: ./slackware/xap
PACKAGE SIZE (compressed): 50 K
PACKAGE SIZE (uncompressed): 140 K
PACKAGE DESCRIPTION:
xxgdb: xxgdb (graphical program debugger interface)
xxgdb:
xxgdb: Xxgdb is a graphical user interface to the gdb debugger under the X
xxgdb: Window System. It provides visual feedback and mouse input for the
xxgdb: user to control program execution through breakpoints, to examine and
xxgdb: traverse the function call stack, and to display values of variables
xxgdb: and data structures.
xxgdb:
PACKAGE NAME: yptools-2.9-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 212 K
PACKAGE SIZE (uncompressed): 620 K
PACKAGE DESCRIPTION:
yptools: yptools (NIS servers and clients)
yptools:
yptools: NIS stands for Network Information Service. NIS is usually used to
yptools: provide /etc/passwd and /etc/group information throughout the network.
yptools: Most Sun-based networks run NIS, and Linux machines can take full
yptools: advantage of existing NIS service or provide NIS service themselves.
yptools:
PACKAGE NAME: ytalk-3.3.0-i486-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 47 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
ytalk: ytalk (multi-user chat program)
ytalk:
ytalk: YTalk is a multi-user chat program. It works almost exactly like the
ytalk: UNIX talk program and even communicates with the same talk daemon, but
ytalk: YTalk allows for multiple connections.
ytalk:
PACKAGE NAME: zd1211-firmware-1.4-fw-1.tgz
PACKAGE LOCATION: ./slackware/n
PACKAGE SIZE (compressed): 71 K
PACKAGE SIZE (uncompressed): 440 K
PACKAGE DESCRIPTION:
zd1211-firmware: zd1211-firmware (Firmware for zd1211 USB wireless)
zd1211-firmware:
zd1211-firmware: This distribution contains the firmware files for the ZD1211 chip,
zd1211-firmware: which is used in WLAN USB sticks. The files are generated from C
zd1211-firmware: header files distributed in the original ZyDAS ZD1211 driver. The
zd1211-firmware: GPL-licensed header files used to produce the firmware blobs are also
zd1211-firmware: present in this distribution.
zd1211-firmware:
zd1211-firmware: The full source of the original ZYDAS driver is available from
zd1211-firmware:
http://zd1211.wiki.sourceforge.net/VendorDriver
zd1211-firmware:
PACKAGE NAME: zlib-1.2.3-i486-2.tgz
PACKAGE LOCATION: ./slackware/l
PACKAGE SIZE (compressed): 128 K
PACKAGE SIZE (uncompressed): 320 K
PACKAGE DESCRIPTION:
zlib: zlib (compression library)
zlib:
zlib: zlib is a general purpose thread safe data compression library. The
zlib: data format used by the zlib library is described by RFCs 1950 to
zlib: 1952 in the files
ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
zlib: rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
zlib:
PACKAGE NAME: zoo-2.10-i486-1.tgz
PACKAGE LOCATION: ./slackware/a
PACKAGE SIZE (compressed): 56 K
PACKAGE SIZE (uncompressed): 110 K
PACKAGE DESCRIPTION:
zoo: zoo (archiving and compressing utility)
zoo:
zoo: Zoo is used to create and maintain collections of files in compressed
zoo: form. It uses a Lempel-Ziv compression algorithm that gives space
zoo: savings in the range of 20% to 80% depending on the type of file data.
zoo: Zoo can store and selectively extract multiple generations of the same
zoo: file. Data can be recovered from damaged archives by skipping the
zoo: damaged portion and locating undamaged data with the help of fiz(1).
zoo:
zoo: Zoo was written by Rahul Dhesi.
zoo:
PACKAGE NAME: zsh-4.3.6-i486-1.tgz
PACKAGE LOCATION: ./slackware/ap
PACKAGE SIZE (compressed): 2302 K
PACKAGE SIZE (uncompressed): 6870 K
PACKAGE DESCRIPTION:
zsh: zsh (the Z shell)
zsh:
zsh: Zsh is a UNIX command interpreter (shell) which of the standard shells
zsh: most resembles the Korn shell (ksh), although it is not completely
zsh: compatible. It includes enhancements of many types, notably in the
zsh: command-line editor, options for customizing its behavior, filename
zsh: globbing, features to make C-shell (csh) users feel more at home and
zsh: extra features drawn from tcsh (another 'custom' shell). Zsh was
zsh: written by Paul Falstad.
zsh:
