Scientific Linux Fermi LTS 4.6 x86

Scientific Linux Fermi LTS 4.6 x86_64 March 25, 2008

Please send bug reports to [email protected],[email protected]

Please read the Release Notes for Scientific Linux. It is located at
SL.releasenote

Also read the Upstream Vendor release notes . They are located in
*Upstream.vendor.U6.releasenote
and the older releasenotes in SL.documentation/

All of the info in the SL.releasenote is valid unless this document
states otherwise. This document only contains info that is specific
to the Fermi site. Any reference to SL.releasenote is done to emphasis
that it contains important information.

All of these release notes, as well as earlier ones, can be found at
http://www-oss.fnal.gov/projects/fermilinux/lts4x/release.notes.html

----------------------------------------------------------------------------

This is based on the rebuilding of RPMS out of SRPMS's that form Scientific
Linux. Please read this entire document before installing.

Table of contents

HARDWARE REQUIREMENTS
INSTALLATION INFO
* ADDED compared to Scientific Linux 4.6
* UPDATED compared to Scientific Linux 4.6
Installer modifications
/contrib
/docs
/notsupported
MISC Notes
HARDWARE SPECIFIC ISSUES
SOFTWARE ISSUES/BUGS
SUPPORT INFO
vendor ERRATA

Each has a "---" line above and below it.
_____________________________________________________________________________
HARDWARE REQUIREMENTS
_____________________________________________________________________________

- See SL.releasenotes

- Common "Fermi Generic Desktop" Installation : 5GB
_____________________________________________________________________________
INSTALLATION INFO
_____________________________________________________________________________
Installation Locations

Via NFS

linux.fnal.gov:/export/linux/lts46/x86_64/

with floppy

There is no floppy install as the kernel is too big to fit on a floppy.

with cdrom

There is a boot.iso which is small iso image which includes all the
drivers. After download you can use cdrecord to create a cdr with this
image on it.

ftp://linux.fnal.gov/download/lts46/network.install.x86_64/boot.iso

Via CDROM

Download and then burn cdrom iso images from

ftp://linux.fnal.gov/download/lts46/cd.install.x86_64/
-----------------------------------------------------------------------------
ADDED compared to Scientific Linux
-----------------------------------------------------------------------------
*Fermi-release-4.6-1.noarch.rpm

Made change so that /etc/issue and /etc/issue.net showed Fermi
Linux instead of RedHat.

Clam Anti Virus

Clam Anti-Virus. Obtained from the DAG repository and rebuilt from
src.rpm. http://www.clamav.net

clamav-0.87.1-1.rf.x86_64.rpm
clamav-db-0.87.1-1.rf.x86_64.rpm
clamav-devel-0.87.1-1.rf.x86_64.rpm
clamav-milter-0.87.1-1.rf.x86_64.rpm
clamd-0.87.1-1.rf.x86_64.rpm
clamtk-2.13-1.rf.x86_64.rpm

flpr

I am installing the flpr rpm by default. I got the latest version
from Randy. This does NOT require ups/upd. The flpr binary will
reside in /usr/local/bin/ . This should just make using flpr
easier for all.

flpr-2.4-4f.9x.i386.rpm

Java

See SL.releasenote

Kerberos -- Fermi version

The fixes in these new kerberos packages should fix the
kerberos - afs problem.

The configuration rpm's set ignore_afs = true, this get's rid of the
long wait as pam decides what to do.

The libs rpm, which has the /etc/pam.d/z_krb5* scripts, now checks
to see if you have AFS, then if you have a keberos ticket, and if
you do, then it does an aklog -setpag for you.

The end result is a quicker login, with the benifit of cutting down
on afs token stealing if multiple people log in as the same user.

krb5-fermi-krb5.conf will ONLY put on a /etc/krb5.conf that points
to the fermi domain. If you have krb5-fermi-config you DO NOT
need this. This is intended for use with the Redhat provided
kerberos. Many offsite users will find this of use.

krb5-fermi-config-1.9-4 and later has a seperate script that only
adds or removes aklog from your krb5.conf. This script now get's
run (via triggers) whenever openafs get's added or removed.

krb5-fermi-config-2.7-1.noarch.rpm
krb5-fermi-krb5.conf-2.7-1.noarch.rpm
krb5-libs-fermi-1.8a-LTS4.4.i386.rpm
krb5-workstation-fermi-1.8a-LTS4.4.i386.rpm

OpenAFS

See SL.releasenote

Installing OpenAFS using Yum

Yum 2.4, which is found in Scientific Linux 4.x, is not as good at
figuring out which kernel-modules need to be installed with openafs.
Because of this, sometime's it tries to install the wrong kernel-module
when you are installing openafs by hand.
Here is the procedure for installing openafs, using yum

yum install openafs-client openafs-thiscell kernel-module-openafs-`uname -r`

redhat-logos-1.1.25-1.LTS.4.noarch.rpm

This version of redhat-logo's has all of the generic changes
that were made with Scientific Linux. It has also changed all
of the Scientific Linux specific logo's, as well as anything
that was in the old zz_fermi-logos

SLIP
Scientific Linux Inventory Project client and dependencies

ocsinventory-client-0.9.9-7.noarch.rpm
perl-XML-Simple-2.14-2.rf.noarch.rpm

SL_...

See SL.releasenote. These are similar to zz_... . The only
difference is that the SL_... were deemed more generic and thus
should be included in the Full SL release and not only in Fermi
site version.

upsupdbootstrap

Not installed by default anymore for "Fermi Generic Desktop.
Does NOT create symbolic links from /usr/local/bin to ups areas.
Can select during install if needed.

upsupdbootstrap-4.1-1.i386.rpm
upsupdbootstrap-fnal-4.0-4.i386.rpm
Installs ups/upd to /fnal/ups
Was upsupdbootstrap-generic, changed to make the name clearer
upsupdbootstrap-local-4.0-4.i386.rpm
Installs ups/upd to /local/ups

vnc
Issue with vnc allowing more than just localhost to connect by
default.

The starting point was the latest Fedora Core SRPM of vnc,
back-ported to use the XFree86-4.3.0-78.EL sources instead of x.org
and javac instead of the (too-old) gcc-java, and patched to set the
"localhostOnly" parameter to true by default. Note that it is still
possible to return to RISKY behavior by invoking:

vncserver -localhost="no" (or 0, or "off")

Note that vncviewer has the new option "-via", meaning that the
command line:

vncviewer -via <host>.fnal.gov localhost:1

will set up an SSH tunnel and use it to access the local vncserver
running on <host>.fnal.gov, all in one step.

NOTE that vnc is ONLY allowed if used with a kerberized SSH tunnel i
onsite at Fermi and visible only to localhost . See the above info.

Thanks to Chris Green for this patched vnc.

vnc-4.0-13f2.x86_64.rpm
vnc-server-4.0-13f2.x86_64.rpm

*yum-conf-46-1.LTS.noarch.rpm

Modified to give Fermi's rpm's a priority, as well as point to
Fermi's linux distribution servers instead of scientific linux's.
Also excludes the generic SL openssh rpm's.
Now has a testing repository
Added http://linux1.fnal.gov/ and made it the default repository

*yum-conf-4x-2-4.LTS.noarch.rpm

Added http://linux1.fnal.gov/ and made it the default repository
Will keep you at 4x which is the current 4x release. So when
we release the next 4 release yum will automatically yum install it
, except for the kernel.

yum install yum-conf-4x

This is NOT installed by default.

zz_a2ps_stdout-1.0-3.noarch.rpm

Change the output of a2ps to go to stdout vs the printer.

zz_dhcp_resolv-3.0.1-2.noarch.rpm

This rpm fixes that so that when your network starts, as it checks
your resolv.conf, if you have dhcp.fnal.gov, but not fnal.gov it will
put it in, so that you will have "search fnal.gov dhcp.fnal.gov" in
your /etc/resolv.conf file.

zz_emacs_link-1.1-5.noarch.rpm

Make a symbolic link from "emacs" to "xemacs" when xemacs is installed
and emacs is not installed. This version uses triggers to make or
remove the link when emacs, or xemacs is added or removed.

zz_firstboot_fix-1.0-3.noarch.rpm

Make changes to firstboot.

zz_lang_collate-1.0-2.noarch.rpm

Changes LANG so that sorting is done the same as 6.1 and
earlier. (ABCabc instead of AaBbCc). This is not installed by
default except for a few workgroups. Can be added later with
a "yum install zz_lang_collate" .

zz_ntp_configure-4.2.0-6.noarch.rpm

Configure ntp for Fermi site network.
Startup script now pokes hole in the firewall for itself

zz_pine_user_domain-1.0-1.noarch.rpm

By default when a user sends mail from pine their email address
is [email protected]. This rpm changes it so that the
default is [email protected] by modifying the /etc/pine.conf config file.

zz_sendmail_accept-2.0-1.noarch.rpm

Changes Sendmail config so that it allows incomming mail.
This the same as the SL_sendmail_accept except that the sendmail
startup script pokes holes for fermilab on startup, and closes them
on shutdown

zz_sendmail_fermi_gateway-2.0-1.noarch.rpm

This rpm is designed to send outbound sendmail e-mail through
the fermilab e-mail gateway(smtp.fnal.gov).

zz_sshd_aklog-3.9-5.noarch.rpm

As of Fermi's version openssh-3.9p1-8.SLF.4.17 aklog was
taken out of the sshd_config due to it not working and causing
an error. This script removes aklog from sshd_config .
The aklog function is built in openssh-3.9p1-8.SLF.4.* .

zz_sshd_nonkerberized-3.9-1.noarch.rpm

Fermi's openssh is normally kerberized out of the box. This rpm
will make it non-kerberized. Should only be used offsite.
version 3.9 was changed to work with the configurations of openssh 3.9

zz_sshd_pam-3.9-3.noarch.rpm

This changes the setting in sshd_config from "UsePAM = no" to
"UsePAM = yes"
When used with the new pam_krb5 (version 2.2.8-2) this allows your
ssh deamon to do cryptocard prompting.

zz_tcp_wrappers_change-3.0-3.noarch.rpm

Disable all offsite access to common network services. Also
puts in the "DOE required login banners". If it determines that
you have already modified /etc/hosts.allow or host.deny it leaves
them alone.

zz_tex_tweaks-1.0-1.noarch.rpm

Changes the default paper size to 8.5 x 11 vs A3

apt-get

Scientific Linux Fermi is not aptable. We do NOT provide any
config files for this. If you want to use apt YOU will need
to add /etc/apt/ entries to point to Scientific Linux Fermi.

We only support yum handling the daily "auto update" function.
Note that yum can handle the "auto update" function with
apt still able to do "installs".

Apt does not work well with dual arch distos. Since this version
of SLF is dual arch apt does NOT work with it. Apt-rpm development
has been stopped.

Only YUM is installed by default and ONLY YUM is SUPPORTED at Fermi.
So why am i mentioning this if apt does not work and is dead. Because
it is still in the release and did not want it to be used.

Workgroup tag files

These are used to specify which workgroup you belong to.

Astro-tag-3.0-7.noarch.rpm
BooNEDataServer-tag-3.0-7.noarch.rpm
BooNE-LANL-tag-3.0-8.noarch.rpm
BooNE-tag-3.0-7.noarch.rpm
CDFCAFworker-tag-3.0-7.noarch.rpm
CDFlevel3-tag-3.0-7.noarch.rpm
CDFoffsite-tag-3.0-7.noarch.rpm
CDFonline-tag-3.0-7.noarch.rpm
CDF-tag-3.0-7.noarch.rpm
ClueD0Workstation-tag-3.0-7.noarch.rpm
CMSdesktop-tag-3.0-7.noarch.rpm
CMSfarm-tag-3.0-7.noarch.rpm
CMSserver-tag-3.0-7.noarch.rpm
ConsoleServer-tag-3.0-7.noarch.rpm
CPDserver-tag-3.0-7.noarch.rpm
CPD-tag-3.0-7.noarch.rpm
CSS-tag-3.0-7.noarch.rpm
D0online-tag-3.0-8.noarch.rpm
DcacheServer-tag-3.0-10.noarch.rpm
EAG-tag-3.0-8.noarch.rpm
FarmsConsole-tag-3.0-7.noarch.rpm
Farms-tag-3.0-7.noarch.rpm
FermiGenericDesktopOffsite-tag-3.0-7.noarch.rpm
Fermigrid-tag-4.0-3.noarch.rpm
FermiStandAlone-tag-3.0-7.noarch.rpm
FermiVeryGeneric-tag-3.0-7.noarch.rpm
FnaluBatch-tag-3.0-7.noarch.rpm
FnaluInteractive-tag-3.0-7.noarch.rpm
FOCUS-tag-3.0-7.noarch.rpm
GenericFarm-tag-3.0-7.noarch.rpm
GenericServer-tag-3.0-9.noarch.rpm
ILCDesktop-tag-4.0-4.noarch.rpm
ILCServer-tag-4.0-5.noarch.rpm
ILCta-tag-4.0-5.noarch.rpm
LHCroc-tag-4.0-5.noarch.rpm
* Minerva-tag-4.0-6.noarch.rpm
Minos-tag-3.0-7.noarch.rpm
OAA-tag-3.0-7.noarch.rpm
RIP-tag-3.0-7.noarch.rpm
SciBooNE-tag-4.0-4.noarch.rpm
SDSS-tag-3.0-7.noarch.rpm
Sidet-tag-3.0-7.noarch.rpm
Theory-tag-3.0-7.noarch.rpm

---------------------------------------------------------------------------
UPDATED compared to 3
----------------------------------------------------------------------------
authconfig

Authconfig needed to be tweeked because it was putting a line into
the /etc/pam.d/system-auth that would not allow you to log into
root or a group account if there was a .k5login file in the accounts
home area. This is the same change that was done in LTS 3.0.x

authconfig-4.6.10-LTS4x.3.x86_64.rpm
authconfig-gtk-4.6.10-LTS4x.3.x86_64.rpm

font-xorg-*

Missing a install dependency on "which" . This caused the post
script to fail and not run mkfontdir for each font directory

fonts-xorg-100dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-75dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-base-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-cyrillic-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-14-100dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-14-75dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-15-100dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-15-75dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-2-100dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-2-75dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-9-100dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-ISO8859-9-75dpi-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-syriac-6.8.2-1.EL.SL.noarch.rpm
fonts-xorg-truetype-6.8.2-1.EL.SL.noarch.rpm

OpenSSH

This is the openssh from S.L. 4.x with some patches and modifications.

It does kerberos with both fermi's old openssh(old gssapi), as well as
generic new openssh's(new gssapi) for both the server and the client.
So end users won't need a special openssh.

It works with multiple IP address's (if you are behind a load balancer)

It has the "High Performance Networking" patch (a command line option)
http://www.psc.edu/networking/projects/hpn-ssh/

It does 'kerberos only' by default

It does not do cryptocard. Users needing this need to install
the modified pam module (pam_krb5-2.2.8-2) and then either change
the sshd_config to say "UsePAM = yes" or install the
zz_sshd_pam rpm.

If a workgroup wants to install openssh-server then they just need
to add the entry from their "comps" file as it is NOT installed by
default.

openssh-3.9p1-8.SLF.4.22.x86_64.rpm
openssh-askpass-3.9p1-8.SLF.4.22.x86_64.rpm
openssh-askpass-gnome-3.9p1-8.SLF.4.22.x86_64.rpm
openssh-clients-3.9p1-8.SLF.4.22.x86_64.rpm
openssh-server-3.9p1-8.SLF.4.22.x86_64.rpm

pam_krb5

This pam module is a newer version. It works with cryptocard. It also
works with Fermilab's new and old kdc's.
This has been compiled with static libraries so it doesn't matter which
kerberos you have installed.

pam_krb5-2.2.11-5.slf4.x86_64.rpm

SL_enable_serialconsole-3.1-4.noarch.rpm

The serial console was changed from mingetting to agetty

----------------------------------------------------------------------------
Installer modifications
---------------------------------------------------------------------------
Anaconda (installer)

Changes to "defaults" from vendor installer.

Firewall is on by default. Hole poked for ntp.

US/Central is default timezone. vendor default was New York.

Kerberos is on by default with a realm of FNAL.GOV . vendor default
was off.

Default install is via ftp, can still select nfs by typing nfs
at isolinux prompt

rhgb(RedHat Graphical Boot) is not turned on by default.
If a workgroup wants it on they need to include "rhgb" in their
comps.xml file

Workgroup "Fermi Generic Desktop"

For the network install all security errata that are available in
our network tree will be installed at the end of the install.

---------------------------------------------------------------------------
/contrib/
---------------------------------------------------------------------------
The packages in this section have been contributed by various people. They
are presented AS IS and there is no guarantee of them working. These packages
are NOT supported by us. They will only get security updates if the
contributor provides them. If you have questions about them then ask the
contributor.

To use with yum:
For one time only (prefered method)
yum --enablerepo=Fermi-contrib install <package>
To enable for all yum updates/install (including autoyum)
edit the file /etc/yum.repos.d/fermi-contrib.repo
and change the line
enabled=0
to
enabled=1

See README's in the RPMS/ directorys for specific package info.

/sites/Fermi/contrib/RPMS/

---------------------------------------------------------------------------
MISC NOTES
---------------------------------------------------------------------------
Upgrades from prior versions.

UPDATES are only supported via the installer for upgrading from
Scientific Linux LTS 3.0.x to Scientific Linux LTS 40rolling.
YUM will NOT work, do not use it.
Vendor seems to really want users to start from scratch.

---------------------------------------------------------------------------
SOFTWARE ISSUES/BUGS
---------------------------------------------------------------------------

ATI x700 video cards are NOT supported in the version of X included here.

---------------------------------------------------------------------------
SUPPORT INFO
---------------------------------------------------------------------------
Fermi site users should start with the "Fermi" specific support areas and
use the Scientific Linux next.

Fermi Linux web pages

http://www.fnal.gov/cd/unix/linux

Fermi Linux Community support mailing list

[email protected]

Which is archived at

http://listserv.fnal.gov/archives/linux-users.html

Scientific Linux web page

http://www.scientificlinux.org

----------------------------------------------------------------------------
ERRATA released after SL 4.6
------------------------------------------------------------------------------
* apr-0.9.4-24.9.sl4.i386.rpm
* apr-devel-0.9.4-24.9.sl4.x86_64.rpm
* ccs-1.0.11-1.el4_6.1.x86_64.rpm
* ccs-devel-1.0.11-1.el4_6.1.x86_64.rpm
* cman-1.0.17-0.el4_6.5.x86_64.rpm
* cman-devel-1.0.17-0.el4_6.5.x86_64.rpm
* cman-kernel-2.6.9-53.9.x86_64.rpm
* cman-kernel-largesmp-2.6.9-53.9.x86_64.rpm
* cman-kernel-smp-2.6.9-53.9.x86_64.rpm
* cman-kernel-xenU-2.6.9-53.9.x86_64.rpm
* cman-kernheaders-2.6.9-53.9.x86_64.rpm
* cmirror-kernel-2.6.9-38.8.x86_64.rpm
* cmirror-kernel-largesmp-2.6.9-38.8.x86_64.rpm
* cmirror-kernel-smp-2.6.9-38.8.x86_64.rpm
* cmirror-kernel-xenU-2.6.9-38.8.x86_64.rpm
* dlm-kernel-2.6.9-52.5.x86_64.rpm
* dlm-kernel-largesmp-2.6.9-52.5.x86_64.rpm
* dlm-kernel-smp-2.6.9-52.5.x86_64.rpm
* dlm-kernel-xenU-2.6.9-52.5.x86_64.rpm
* dlm-kernheaders-2.6.9-52.5.x86_64.rpm
* GFS-kernel-2.6.9-75.12.x86_64.rpm
* GFS-kernel-largesmp-2.6.9-75.12.x86_64.rpm
* GFS-kernel-smp-2.6.9-75.12.x86_64.rpm
* GFS-kernel-xenU-2.6.9-75.12.x86_64.rpm
* GFS-kernheaders-2.6.9-75.12.x86_64.rpm
* gnbd-kernel-2.6.9-10.32.x86_64.rpm
* gnbd-kernel-largesmp-2.6.9-10.32.x86_64.rpm
* gnbd-kernel-smp-2.6.9-10.32.x86_64.rpm
* gnbd-kernel-xenU-2.6.9-10.32.x86_64.rpm
* gnbd-kernheaders-2.6.9-10.32.x86_64.rpm
* kernel-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-devel-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-doc-2.6.9-67.0.7.EL.noarch.rpm
* kernel-largesmp-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-largesmp-devel-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-module-fuse-2.6.9-67.0.7.EL-2.5.3-1.SL.x86_64.rpm
* kernel-module-fuse-2.6.9-67.0.7.ELlargesmp-2.5.3-1.SL.x86_64.rpm
* kernel-module-fuse-2.6.9-67.0.7.ELsmp-2.5.3-1.SL.x86_64.rpm
* kernel-module-fuse-2.6.9-67.0.7.ELxenU-2.5.3-1.SL.x86_64.rpm
* kernel-module-ipw3945-2.6.9-67.0.7.EL-1.1.0-1.SL4.x86_64.rpm
* kernel-module-ipw3945-2.6.9-67.0.7.ELlargesmp-1.1.0-1.SL4.x86_64.rpm
* kernel-module-ipw3945-2.6.9-67.0.7.ELsmp-1.1.0-1.SL4.x86_64.rpm
* kernel-module-ipw3945-2.6.9-67.0.7.ELxenU-1.1.0-1.SL4.x86_64.rpm
* kernel-module-madwifi-2.6.9-67.0.7.EL-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-madwifi-2.6.9-67.0.7.ELlargesmp-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-madwifi-2.6.9-67.0.7.ELsmp-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-madwifi-hal-2.6.9-67.0.7.EL-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-madwifi-hal-2.6.9-67.0.7.ELlargesmp-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-madwifi-hal-2.6.9-67.0.7.ELsmp-0.9.3.3-10.sl4.x86_64.rpm
* kernel-module-ndiswrapper-2.6.9-67.0.7.EL-1.41-1.SL.x86_64.rpm
* kernel-module-ndiswrapper-2.6.9-67.0.7.ELlargesmp-1.41-1.SL.x86_64.rpm
* kernel-module-ndiswrapper-2.6.9-67.0.7.ELsmp-1.41-1.SL.x86_64.rpm
* kernel-module-ndiswrapper-2.6.9-67.0.7.ELxenU-1.41-1.SL.x86_64.rpm
* kernel-module-openafs-2.6.9-67.0.7.EL-1.4.6-58.SL4.x86_64.rpm
* kernel-module-openafs-2.6.9-67.0.7.ELlargesmp-1.4.6-58.SL4.x86_64.rpm
* kernel-module-openafs-2.6.9-67.0.7.ELsmp-1.4.6-58.SL4.x86_64.rpm
* kernel-module-openafs-2.6.9-67.0.7.ELxenU-1.4.6-58.SL4.x86_64.rpm
* kernel-module-r1000-2.6.9-67.0.7.EL-2.2-2.SL4x.x86_64.rpm
* kernel-module-r1000-2.6.9-67.0.7.ELlargesmp-2.2-2.SL4x.x86_64.rpm
* kernel-module-r1000-2.6.9-67.0.7.ELsmp-2.2-2.SL4x.x86_64.rpm
* kernel-module-r1000-2.6.9-67.0.7.ELxenU-2.2-2.SL4x.x86_64.rpm
* kernel-smp-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-smp-devel-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-xenU-2.6.9-67.0.7.EL.x86_64.rpm
* kernel-xenU-devel-2.6.9-67.0.7.EL.x86_64.rpm
* krb5-devel-1.3.4-54.el4_6.1.x86_64.rpm
* krb5-libs-1.3.4-54.el4_6.1.i386.rpm
* krb5-server-1.3.4-54.el4_6.1.x86_64.rpm
* krb5-workstation-1.3.4-54.el4_6.1.x86_64.rpm
* tzdata-2007k-2.el4.noarch.rpm