The rh62perc2.img is the image file for the Dell PowerEdge RAID Controller 2
for the driver disk of RedHat 6.2

To install simply write this image to the blank floppy disk, either via
rawrite.exe on DOS or under Linux with this command:

 dd if=rh62perc2.img of=/dev/fd0

Boot from a standard 6.2 boot floppy WITHOUT the RedHat 6.2 CD inserted. At the
boot prompt type

 linux dd

and wait for the installer to ask you to insert the driver disk. Insert the
driver disk and continue with the installation: Select your
language and keyboard and then select HardDisk as installation media.

There you will be able to manually load the driver by selecting the Dell
PowerEdge RAID Controller from the list.

From there go back to CDROM, insert the RedHat 6.2 CD and continue with the
installation.

In case you have any serious problems with this driver disk please contact
[email protected]