msgid ""
msgstr ""
"POT-Creation-Date: 1999-04-15 22:01-0400\n"
"Content-Type: text/plain; charset=\n"
"Date: 1998-04-14 17:21:27-0400\n"
"From: Donnie Barnes <
[email protected]>\n"
"Xgettext-Options: --default-domain=Xconfigurator --add-comments --keyword=_ "
"--keyword=N_\n"
"Files: ../Xconfigurator.c\n"
#: ../Xconfigurator.c:193
msgid ""
"This program will create a basic XF86Config file, based on menu selections "
"you make.\n"
"\n"
"The XF86Config file usually resides in /usr/X11R6/lib/X11 or /etc/X11. A "
"sample XF86Config file is supplied with XFree86; it is configured for a "
"standard VGA card and monitor with 640x480 resolution. \n"
"\n"
"You can either take the sample XF86Config as a base and edit it for your "
"configuration, or let this program produce a base XF86Config file for your "
"configuration and fine-tune it. Refer to "
"/usr/X11R6/lib/X11/doc/README.Config for a detailed overview of the "
"configuration process. \n"
"\n"
"For accelerated servers (including accelerated drivers in the SVGA server), "
"there are many chipset and card-specific options and settings. This program "
"does not know about these. On some configurations some of these settings "
"must be specified. Refer to the server man pages and chipset-specific "
"READMEs. \n"
"\n"
"Before continuing with this program, make sure you know the chipset and "
"amount of video memory on your video card. SuperProbe can help with this. "
"It is also helpful if you know what server you want to run."
msgstr ""
"dis here program makes a XF86Config file usin informashun that you give.\n"
"\n"
"da XF86Config file usually hides in /usr/X11R6/lib/X11 or /etc/X11. you "
"gits a sample file from XFree86; it comes configurated fer a normal VGA card "
"and a 640x480 moniter. \n"
"\n"
"ya can take the sample XF86Config and edit it yerself (we'uns don't "
"recommend that) or (and dis is da part we like) you can continue dis program "
"to build one fer ya.\n"
"\n"
"you might need ta know the chipset and amount of memories your video board "
"has gots, but prolly not."
#: ../Xconfigurator.c:215 ../Xtest.c:19
#, fuzzy
msgid ""
"Configuration file has been written. Take a look at it before running "
"'startx'. Note that the XF86Config file must be in one of the directories "
"searched by the server (e.g. /etc/X11/XF86Config) in order to be used. "
"Within the server press ctrl, alt and '+' simultaneously to cycle video "
"resolutions. Pressing ctrl, alt and backspace simultaneously immediately "
"exits the server (use if the monitor doesn't sync for a particular mode). \n"
"\n"
"For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config.\n"
"\n"
msgstr "i wrote da file. you mat wanna poke at it before ya run 'startx'. \n"
#: ../Xconfigurator.c:246
#, c-format
msgid "%s: cannot open /etc/inittab: %s\n"
msgstr ""
#: ../Xconfigurator.c:390
msgid ""
"Select the video modes you would like to use. 8 bit modes allow for 256 "
"colors, 16 bit modes allow for 64k colors, and 24 bit modes allow for true "
"color. Performance will be slower, however, the higher you go. You should "
"select at least one of the elements below."
msgstr ""
"gimme sum video modes ta use. 8 bit is fer 256 cullers, 16 bit is fer 64 "
"thousand a dem cullers, and 24 bits gives ya true culler. ya lose some "
"performance tha higher ya go. you needs to pick one of the thangs below."
#: ../Xconfigurator.c:403
msgid "8 bit:"
msgstr ""
#: ../Xconfigurator.c:406
msgid "16 bit:"
msgstr ""
#: ../Xconfigurator.c:409
msgid "24 bit:"
msgstr ""
#: ../Xconfigurator.c:418 ../Xconfigurator.c:1128 ../Xconfigurator.c:1248
#: ../Xconfigurator.c:1278 ../Xconfigurator.c:1290 ../Xconfigurator.c:1302
#: ../Xconfigurator.c:1421 ../Xconfigurator.c:1508 ../Xconfigurator.c:1557
#: ../Xconfigurator.c:1593 ../Xconfigurator.c:1653 ../Xconfigurator.c:1831
#: ../Xconfigurator.c:1899 ../Xconfigurator.c:1938 ../Xconfigurator.c:2008
#: ../Xconfigurator.c:2026 ../Xconfigurator.c:2118 ../Xconfigurator.c:2151
#: ../Xconfigurator.c:2445 ../Xconfigurator.c:2462 ../Xconfigurator.c:2509
#: ../Xconfigurator.c:2552 ../Xconfigurator.c:2581 ../Xconfigurator.c:2596
#: ../Xconfigurator.c:2653 ../Xconfigurator.c:2758 ../Xconfigurator.c:3214
#: ../Xconfigurator.c:3639 ../Xconfigurator.c:3741 ../Xconfigurator.c:3748
#: ../Xconfigurator.c:4010 ../Xconfigurator.c:4115 ../Xconfigurator.c:4200
msgid "Ok"
msgstr "yep"
#: ../Xconfigurator.c:418 ../Xconfigurator.c:1248 ../Xconfigurator.c:1278
#: ../Xconfigurator.c:1290 ../Xconfigurator.c:1302 ../Xconfigurator.c:1593
#: ../Xconfigurator.c:1654 ../Xconfigurator.c:1939 ../Xconfigurator.c:2008
#: ../Xconfigurator.c:2026 ../Xconfigurator.c:2699 ../Xconfigurator.c:4011
#: ../Xconfigurator.c:4162
msgid "Back"
msgstr ""
#: ../Xconfigurator.c:421
msgid "Select Video Modes"
msgstr "pick video modes"
#: ../Xconfigurator.c:463
#, c-format
msgid "%s: cannot open /etc/sysconfig/mouse: %s\n"
msgstr ""
#: ../Xconfigurator.c:491 ../Xconfigurator.c:506 ../Xconfigurator.c:521
#, c-format
msgid "%s: mismatched quotes on line %d in /etc/sysconfig/mouse\n"
msgstr ""
#: ../Xconfigurator.c:539
#, c-format
msgid "%s: line %d unexpected in /etc/sysconfig/mouse\n"
msgstr ""
#: ../Xconfigurator.c:549
#, c-format
msgid "%s: cannot read /etc/sysconfig/mouse: %s\n"
msgstr ""
#: ../Xconfigurator.c:601
#, c-format
msgid "%s: Critical error reading /etc/sysconfig/mouse.\n"
msgstr ""
#: ../Xconfigurator.c:603
#, c-format
msgid "%s: Check permissions of /etc/sysconfig/mouse.\n"
msgstr ""
#: ../Xconfigurator.c:605 ../Xconfigurator.c:794
#, c-format
msgid "%s: Also - make sure you are running this program as root\n"
msgstr ""
#: ../Xconfigurator.c:640
#, c-format
msgid "%s: cannot open /etc/sysconfig/keyboard: %s\n"
msgstr ""
#: ../Xconfigurator.c:672
#, c-format
msgid "%s: mismatched quotes on line %d in /etc/sysconfig/keyboard\n"
msgstr ""
#: ../Xconfigurator.c:698
#, c-format
msgid "%s: line %d unexpected in /etc/sysconfig/keyboard\n"
msgstr ""
#: ../Xconfigurator.c:708
#, c-format
msgid "%s: cannot read /etc/sysconfig/keyboard: %s\n"
msgstr ""
#: ../Xconfigurator.c:790
#, c-format
msgid "%s: Critical error reading /etc/sysconfig/keyboard.\n"
msgstr ""
#: ../Xconfigurator.c:792
#, c-format
msgid "%s: Check permissions of /etc/sysconfig/keyboard.\n"
msgstr ""
#: ../Xconfigurator.c:814 ../Xconfigurator.c:817
msgid "Determining type of sun keyboard"
msgstr ""
#: ../Xconfigurator.c:935
msgid ""
"Now we want to set the specifications of the monitor. The two critical "
"parameters are the vertical refresh rate, which is the rate at which the the "
"whole screen is refreshed, and most importantly the horizontal sync rate, "
"which is the rate at which scanlines are displayed.\n"
"\n"
"The valid range for horizontal sync and vertical sync should be documented "
"in the manual of your monitor. If in doubt, check the monitor database "
"/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there."
msgstr ""
"we needs to set the specificashuns of the moniter. dere's to important "
"thangs...the vertical refresh and the horizontal sync rate.\n"
"\n"
"da valid range fer the horizontal sync and vertical refresh is in da manual "
"fer yer moniter."
#: ../Xconfigurator.c:945
msgid ""
"You must indicate the horizontal sync range of your monitor. You can either "
"select one of the predefined ranges below that correspond to "
"industry-standard monitor types, or give a specific range.\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a "
"horizontal sync range that is beyond the capabilities of your monitor. If in "
"doubt, choose a conservative setting."
msgstr ""
"ya gotta gimme da horizontal sync range of yer moniter. ya can select one "
"of da ranges below or give a specific range.\n"
"it's VERY IMPORTANT dat you don't give a sync range higher than whatcher "
"moniter can really do. doin that could blow the thing up. pick something "
"low if you aren't sher."
#: ../Xconfigurator.c:954
msgid ""
"You must indicate the vertical sync range of your monitor. You can either "
"select one of the predefined ranges below that correspond to "
"industry-standard monitor types, or give a specific range. For interlaced "
"modes, the number that counts is the high one (e.g. 87 Hz rather than 43 Hz)."
msgstr ""
"ya gotta give da vertical sync range of yer moniter. ya can pick one of tha "
"ranges below or give yer own."
#: ../Xconfigurator.c:982
msgid "Standard VGA, 640x480 @ 60 Hz"
msgstr ""
#: ../Xconfigurator.c:983
msgid "Super VGA, 800x600 @ 56 Hz"
msgstr ""
#: ../Xconfigurator.c:984
msgid "8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600)"
msgstr ""
#: ../Xconfigurator.c:985
msgid "Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz"
msgstr ""
#: ../Xconfigurator.c:986
msgid "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
msgstr ""
#: ../Xconfigurator.c:987
msgid "Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
msgstr ""
#: ../Xconfigurator.c:988
msgid "High Frequency SVGA, 1024x768 @ 70 Hz"
msgstr ""
#: ../Xconfigurator.c:989
msgid "Monitor that can do 1280x1024 @ 60 Hz"
msgstr ""
#: ../Xconfigurator.c:990
msgid "Monitor that can do 1280x1024 @ 74 Hz"
msgstr ""
#: ../Xconfigurator.c:991
msgid "Monitor that can do 1280x1024 @ 76 Hz"
msgstr ""
#: ../Xconfigurator.c:992
msgid "Monitor that can do 1600x1200 @ 70 Hz"
msgstr ""
#: ../Xconfigurator.c:993
msgid "Monitor that can do 1600x1200 @ 76 Hz"
msgstr ""
#: ../Xconfigurator.c:1100
msgid ""
"\n"
"\n"
"Monitor database was not found!\n"
"\n"
msgstr ""
#: ../Xconfigurator.c:1108
msgid ""
"\n"
" These generic types are also supported (use only the 'Generic##' part\n"
" when specifying the monitor). You must specify the preceding\n"
" '0' if the type is less than 10 (ie. 'Generic02')\n"
"\n"
msgstr ""
#: ../Xconfigurator.c:1128
msgid "Monitor DB"
msgstr ""
#: ../Xconfigurator.c:1129
#, c-format
msgid ""
"The monitor database file %s could not be loaded. Please select a custom "
"monitor configuration closest to your actual monitor."
msgstr ""
#: ../Xconfigurator.c:1238
msgid "Custom"
msgstr ""
#: ../Xconfigurator.c:1244
msgid "Monitor Setup"
msgstr "moniter setup"
#: ../Xconfigurator.c:1245
msgid ""
"What type of monitor do you have? If you would rather specify the sync "
"frequencies of your monitor, choose \"Custom\" from the list."
msgstr ""
"what kinda moniter you got? if'n you wanna give your own sync frequency of "
"yer moniter, pick \"Custom\" from the list."
#: ../Xconfigurator.c:1278
#, fuzzy
msgid "Custom Monitor Setup"
msgstr "moniter setup"
#: ../Xconfigurator.c:1287 ../Xconfigurator.c:1299
#, fuzzy
msgid "Custom Monitor Setup (Continued)"
msgstr "moniter setup (continued)"
#: ../Xconfigurator.c:1350
msgid ""
"\n"
"\n"
"Can't read card database. \n"
"\n"
msgstr ""
#: ../Xconfigurator.c:1380
msgid ""
"\n"
"\n"
"Can't read card database. Exiting.\n"
"\n"
msgstr ""
#: ../Xconfigurator.c:1421
msgid "Unknown Server"
msgstr ""
#: ../Xconfigurator.c:1422
msgid "Somehow in continue mode an unknown server type exists."
msgstr ""
#: ../Xconfigurator.c:1496
#, c-format
msgid " Resolution: %dx%d"
msgstr ""
#: ../Xconfigurator.c:1502
#, fuzzy, c-format
msgid " Monitor type %d\n"
msgstr "moniter setup"
#: ../Xconfigurator.c:1508
#, fuzzy
msgid "SBUS Probe"
msgstr "probin"
#: ../Xconfigurator.c:1508
#, c-format
msgid ""
"SBUS probing found a:\n"
"\n"
" SBUS Entry: %s\n"
"%s X Server : %s\n"
msgstr ""
#: ../Xconfigurator.c:1512 ../Xconfigurator.c:1514 ../Xconfigurator.c:1560
#: ../Xconfigurator.c:1561
msgid "No match"
msgstr ""
#: ../Xconfigurator.c:1557
#, fuzzy
msgid "PCI Probe"
msgstr "probin"
#: ../Xconfigurator.c:1557
#, c-format
msgid ""
"PCI probing found a:\n"
"\n"
" PCI Entry: %s\n"
" X Server : %s\n"
msgstr ""
#: ../Xconfigurator.c:1582
msgid "Unlisted Card"
msgstr ""
#: ../Xconfigurator.c:1588
msgid "Choose a Card"
msgstr "pick a card, any card"
#: ../Xconfigurator.c:1589
msgid ""
"Pick a Card from the list below (Or choose \"Unlisted Card\" at the bottom "
"of the list if your card isn't listed):"
msgstr ""
"pick a card from da list (or pick \"Unlisted Card\" at the bottom of da list "
"if yer card ain't here):"
#: ../Xconfigurator.c:1652
msgid "Pick a Server"
msgstr "pick a server"
#: ../Xconfigurator.c:1652
msgid "Which server do you need?"
msgstr "which server you need?"
#: ../Xconfigurator.c:1680
msgid "No RAMDAC Setting (recommended)"
msgstr ""
#: ../Xconfigurator.c:1681
msgid "AT&T 20C490 (S3 and AGX servers, ARK driver)"
msgstr ""
#: ../Xconfigurator.c:1682
msgid "AT&T 20C498/21C498/22C498 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1683
msgid "AT&T 20C409/20C499 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1684
msgid "AT&T 20C505 (S3)"
msgstr ""
#: ../Xconfigurator.c:1685
msgid "BrookTree BT481 (AGX)"
msgstr ""
#: ../Xconfigurator.c:1686
msgid "BrookTree BT482 (AGX)"
msgstr ""
#: ../Xconfigurator.c:1687
msgid "BrookTree BT485/9485 (S3)"
msgstr ""
#: ../Xconfigurator.c:1688
msgid "Sierra SC15025 (S3, AGX)"
msgstr ""
#: ../Xconfigurator.c:1690
msgid "S3 GenDAC (86C708) (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1691
msgid "S3 SDAC (86C716) (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1693
msgid "S3 GenDAC (86C708)"
msgstr ""
#: ../Xconfigurator.c:1694 ../Xconfigurator.c:1731
msgid "S3 SDAC (86C716)"
msgstr ""
#: ../Xconfigurator.c:1696
msgid "STG-1700 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1697
msgid "STG-1703 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1698
msgid "TI 3020 (S3)"
msgstr ""
#: ../Xconfigurator.c:1699
msgid "TI 3025 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1700
msgid "TI 3026 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1701
msgid "IBM RGB 514 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1702
msgid "IBM RGB 524 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1703
msgid "IBM RGB 525 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1704
msgid "IBM RGB 526 (S3)"
msgstr ""
#: ../Xconfigurator.c:1705
msgid "IBM RGB 528 (S3, autodetected)"
msgstr ""
#: ../Xconfigurator.c:1706
msgid "ICS5342 (S3, ARK)"
msgstr ""
#: ../Xconfigurator.c:1707
msgid "ICS5341 (W32)"
msgstr ""
#: ../Xconfigurator.c:1708
msgid "IC Works w30C516 ZoomDac (ARK)"
msgstr ""
#: ../Xconfigurator.c:1709
msgid "Normal DAC"
msgstr ""
#: ../Xconfigurator.c:1724
msgid "No Clockchip Setting (recommended)"
msgstr ""
#: ../Xconfigurator.c:1725
msgid "Chrontel 8391"
msgstr ""
#: ../Xconfigurator.c:1726
msgid "ICD2061A and compatibles (ICS9161A, DCS2824)"
msgstr ""
#: ../Xconfigurator.c:1727
msgid "ICS2595"
msgstr ""
#: ../Xconfigurator.c:1728
msgid "ICS5342 (similar to SDAC, but not completely compatible)"
msgstr ""
#: ../Xconfigurator.c:1729
msgid "ICS5341"
msgstr ""
#: ../Xconfigurator.c:1730
msgid "S3 GenDAC (86C708) and ICS5300 (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1732
msgid "STG 1703 (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1733
msgid "Sierra SC11412"
msgstr ""
#: ../Xconfigurator.c:1734
msgid "TI 3025 (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1735
msgid "TI 3026 (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1736
msgid "IBM RGB 51x/52x (autodetected)"
msgstr ""
#: ../Xconfigurator.c:1747
msgid ""
"It is possible that the hardware detection routines in the server some how "
"cause the system to crash and the screen to remain blank. If this is the "
"case, skip this step the next time. The server may need a Ramdac, ClockChip "
"or special option (e.g. \"nolinear\" for S3) to probe and start-up correctly."
msgstr ""
"it's possible that hardware detectin can crash da system and leave the "
"screen blank. if'n dis happns, don't do this step again next time."
#: ../Xconfigurator.c:1831 ../Xconfigurator.c:1899 ../Xconfigurator.c:2462
#: ../Xconfigurator.c:2509 ../Xconfigurator.c:2552 ../Xconfigurator.c:2581
#: ../Xconfigurator.c:2596
msgid "X Error"
msgstr ""
#: ../Xconfigurator.c:1832 ../Xconfigurator.c:1900 ../Xconfigurator.c:2553
#: ../Xconfigurator.c:2582 ../Xconfigurator.c:2597
msgid ""
"There was an error detecting the video ram on your card. You should try "
"configuring the video card manually."
msgstr ""
"dere was an error findin the video ram on yer card. configurate it by hand."
#: ../Xconfigurator.c:1837 ../Xconfigurator.c:1905 ../Xconfigurator.c:1982
msgid "Fatal error: Invalid amount of video memory.\n"
msgstr ""
#: ../Xconfigurator.c:1936
msgid "Video Memory"
msgstr "video memory"
#: ../Xconfigurator.c:1937
msgid "How much video memory do you have?"
msgstr "how much video memory you got?"
#: ../Xconfigurator.c:2005
msgid "RAMDAC Configuration"
msgstr "RAMDAC configurashun"
#: ../Xconfigurator.c:2006
msgid "Which RAMDAC do you have?"
msgstr "which RAMDAC you got?"
#: ../Xconfigurator.c:2024
msgid "Clockchip Configuration"
msgstr "clockchip configurashun"
#: ../Xconfigurator.c:2025
msgid "Which Clockchip do you have?"
msgstr "which clockchip you got?"
#: ../Xconfigurator.c:2053 ../Xconfigurator.c:3846
msgid "Probe"
msgstr "probin"
#: ../Xconfigurator.c:2053 ../Xconfigurator.c:4115
msgid "Skip"
msgstr "skip it!"
#: ../Xconfigurator.c:2057
msgid "Do you want to run 'X -probeonly' now?"
msgstr "you wanna run 'X -probeonly' now?"
#: ../Xconfigurator.c:2059
msgid "Probe for Clocks"
msgstr "probe fer clocks"
#: ../Xconfigurator.c:2118 ../Xconfigurator.c:2151
msgid "Clock Probe Failed"
msgstr "clock probin failed"
#: ../Xconfigurator.c:2119 ../Xconfigurator.c:2152
msgid "Configuration will proceed using default values."
msgstr "configurashun proceedin usin defaults."
#: ../Xconfigurator.c:2296
msgid "Unable to probe card - error running X\n"
msgstr "can't probe - error runnin X\n"
#: ../Xconfigurator.c:2320 ../Xconfigurator.c:2330 ../Xconfigurator.c:2339
msgid "Couldn't grep mode lines from probe output.\n"
msgstr ""
#: ../Xconfigurator.c:2408 ../Xconfigurator.c:2413 ../Xconfigurator.c:2419
#: ../Xconfigurator.c:2426
msgid "Failed to create tempfile in kickstart mode\n"
msgstr ""
#: ../Xconfigurator.c:2445
msgid "Probing to begin"
msgstr "probin to begin"
#: ../Xconfigurator.c:2446
msgid ""
"Xconfigurator will now run the X server you selected to probe various "
"information about your video card. It is normal for the screen to blink "
"several times."
msgstr ""
"Xconfigurator will now run the X server you picked to probe a bunch of stuff "
"about yer card. it is normal fer the screen to blank a bunch a times."
#: ../Xconfigurator.c:2463
msgid ""
"There was an error executing the X server in a probing mode. You should try "
"configuring the video card manually."
msgstr ""
#: ../Xconfigurator.c:2510
msgid ""
"There was an error probing the clocks on your video card. You should try "
"configuring the video card manually."
msgstr ""
#: ../Xconfigurator.c:2653
msgid "No Valid Modes"
msgstr ""
#: ../Xconfigurator.c:2654
msgid ""
"No valid video modes were autodetected at 8, 16, or 24 bits per pixel. It is "
"likely that the X server for your video card did not return the information "
"in the way expected by this tool. You can still attempt to configure you "
"video card manually."
msgstr ""
#: ../Xconfigurator.c:2698
msgid "Probing finished"
msgstr "probin dun"
#: ../Xconfigurator.c:2698
msgid "Use Default"
msgstr ""
#: ../Xconfigurator.c:2699
msgid "Let Me Choose"
msgstr "lemme choose"
#: ../Xconfigurator.c:2700
#, c-format
msgid ""
"Xconfigurator has sucessfully probed your video card. The default video mode "
"will be:\n"
"\n"
" Color Depth: %s bits per pixel\n"
" Resolution : %s\n"
"\n"
"Do you want to accept this setting, or select for yourself?"
msgstr ""
"Xconfigurator did sum probin and found yer card. da default video mode will "
"be:\n"
"\n"
" color depth: %s bits per pixel\n"
" resolution : %s\n"
"\n"
"you wanna keep dat, or pick em yerself?"
#: ../Xconfigurator.c:2752
msgid ""
"An error occured during probing; please start over.\n"
"\n"
msgstr ""
#: ../Xconfigurator.c:2755
msgid "The error occured trying to exec X."
msgstr ""
#: ../Xconfigurator.c:2757
msgid "The error occured trying to exec grep."
msgstr ""
#. error occured
#: ../Xconfigurator.c:2758 ../Xconfigurator.c:4162
msgid "Error"
msgstr ""
#: ../Xconfigurator.c:3212
msgid "Can't open file for writing. Perhaps you aren't root?"
msgstr ""
#: ../Xconfigurator.c:3637
#, c-format
msgid "Undetermined error number %d"
msgstr ""
#: ../Xconfigurator.c:3639
msgid "Fatal Error"
msgstr ""
#: ../Xconfigurator.c:3640
msgid ""
"A fatal error occured checking the status of the link\n"
"\n"
" /usr/X11R6/lib/X11/XF86Config\n"
"\n"
"Make sure you are running this utility as root. The fatal error was:\n"
"\n"
msgstr ""
#: ../Xconfigurator.c:3652
msgid "Error with existing XF86Config"
msgstr ""
#: ../Xconfigurator.c:3652
msgid "Yes"
msgstr "yep"
#: ../Xconfigurator.c:3653
msgid "No"
msgstr "nawp"
#: ../Xconfigurator.c:3654
msgid ""
"There is something wrong with the file\n"
"\n"
" /usr/X11R6/lib/X11/XF86Config\n"
"\n"
"This file should normally be a link to\n"
"\n"
" /etc/X11/XF86Config\n"
"\n"
"Shall I make that link now?"
msgstr ""
#. warn user link is still not ok, should look into it
#: ../Xconfigurator.c:3741
msgid "Warning"
msgstr "warnin"
#: ../Xconfigurator.c:3742
msgid ""
"Since you did not set this link, the config file created with this utilty "
"may not be used next time X is started.\n"
"\n"
"It is recommended you look into why this link is not currently set as "
"recommended.\n"
"\n"
"The install will proceed now..."
msgstr ""
#: ../Xconfigurator.c:3845
msgid "Screen Configuration"
msgstr "screen configurashun"
#: ../Xconfigurator.c:3846
msgid "Don't Probe"
msgstr "don't probe"
#: ../Xconfigurator.c:3847
msgid ""
"Xconfigurator now needs to setup the default resolution and color depth. "
"Most modern PCI video cards can be probed, and Xconfigurator will "
"automatically determine the best video mode/color depth possible for your "
"system. There is a chance, however, this could lock up your system. If you "
"would prefer to give the required information instead of having it probed, "
"answer \"Don't Probe\" to the following question."
msgstr ""
"Xconfigurator needs to setup a default restitution and culler amount. lots "
"of PEE-SEE-EYE video cards like bein probed and Xconfigurator will figger da "
"best video mode fer you. if'n you want ta give the required informashun "
"instead of bein probed then answer \"don't probe\" to the followin question."
#: ../Xconfigurator.c:4010
msgid "Welcome"
msgstr ""
#: ../Xconfigurator.c:4011
msgid "Cancel"
msgstr "cantsell"
#: ../Xconfigurator.c:4040
msgid "No card determined in kickstart - bailing\n"
msgstr ""
#: ../Xconfigurator.c:4081
#, c-format
msgid "tried to use %s\n"
msgstr ""
#: ../Xconfigurator.c:4115 ../Xconfigurator.c:4122
msgid "Starting X"
msgstr ""
#: ../Xconfigurator.c:4116
msgid "Xconfigurator will now start X to test your configuration."
msgstr ""
#: ../Xconfigurator.c:4125
msgid "Preparing to start the X server..."
msgstr ""
#: ../Xconfigurator.c:4162
msgid "Quit"
msgstr ""
#: ../Xconfigurator.c:4163
msgid ""
"There is a problem with your X configuration. You may go back and modify "
"your configuration or exit now."
msgstr ""
#: ../Xconfigurator.c:4200
msgid "You're Done!"
msgstr "yer dun!"
#: ../Xtest.c:35
msgid ""
"Xconfigurator can set up your computer to automatically start X upon "
"booting. Would you like X to start when you reboot? "
msgstr ""
#: ../Xtest.c:102 ../Xtest.c:151
#, c-format
msgid ""
"Can you see this message?\n"
"\n"
"Automatic timeout in: %d seconds"
msgstr ""
#: ../Xtest.c:164 ../Xtest.c:305
#, fuzzy
msgid "_Yes"
msgstr "yep"
#: ../Xtest.c:172 ../Xtest.c:312
#, fuzzy
msgid "_No"
msgstr "nawp"
#: ../Xtest.c:255
msgid "_OK"
msgstr ""
