Enterprise Java for Linux HOWTO

Enterprise Java for Linux HOWTO
Gary Meyer [email protected]
v 0.1, January 1999

How to set up an Enterprise Java environment on Linux including a Java
Development Kit, a Web server, supporting Java servlets, accessing a
database via JDBC, and supporting Enterprise Java Beans (EJBs).
______________________________________________________________________

Table of Contents

1. Introduction

1.1 Background
1.2 Audience
1.3 New Versions
1.4 Copyrights and License
1.5 Disclaimers
1.6 Potential Future Sections
1.7 Other Resources
1.8 Feedback

2. How to Setup the Java Development Kit

2.1 Blackdown JDK
2.1.1 Background
2.1.2 Download
2.1.3 Installation
2.1.4 Setting up Your Environment
2.1.5 Confirming Your Installation
2.1.6 More Information
2.2 IBM Java Developer Kit
2.2.1 Background
2.2.2 Download
2.2.3 Installation
2.2.4 Setting up Your Environment
2.2.5 Confirming Your Installation
2.2.6 More Information
2.3 Kaffe
2.3.1 Background
2.3.2 Download and Installation
2.3.3 Setting up Your Environment
2.3.4 Confirming Your Installation
2.3.5 More Information
2.4 Sun J2SE
2.4.1 Background
2.4.2 Download
2.4.3 Installation
2.4.4 Setting up Your Environment
2.4.5 Confirming Your Installation
2.4.6 More Information

3. How to Setup the Web Server

3.1 Apache
3.1.1 Background
3.1.2 Download, Installation, and Setting up Your Environment
3.1.3 Confirming Your Installation
3.2 IBM Domino
3.3 IBM HTTP Server
3.3.1 Background
3.3.2 Download
3.3.3 Installation
3.3.4 Setting up Your Environment
3.3.5 Confirming Your Installation
3.3.6 More Information

4. How to Setup Java Servlet Support

4.1 Allaire JRun
4.2 Apache JServ
4.2.1 Background
4.2.2 Download
4.2.3 Installation
4.2.4 Setting up Your Environment
4.2.5 Confirming Your Installation
4.2.6 More Information
4.3 BEA WebLogic
4.4 Enhydra
4.5 IBM WebSphere
4.6 Locomotive

5. How to Setup Java Server Pages (JSP) Support

5.1 Apache Jakarta
5.2 Caucho Resin

6. How to Setup JDBC Support

6.1 IBM DB2
6.2 MiniSQL
6.3 MySQL
6.4 Oracle
6.5 PostgreSQL
6.5.1 Background
6.5.2 Download and Installation
6.5.3 Confirming Your Installation
6.5.4 More Information
6.6 Sybase
6.6.1 Background
6.6.2 Download
6.6.3 Installation
6.6.4 Confirming Your Installation
6.6.5 More Information

7. How to Setup Enterprise Java Bean (EJB) Support

7.1 BEA WebLogic
7.2 EJBoss
7.2.1 Background
7.2.2 Download
7.2.3 Installation
7.2.4 Setting up Your Environment
7.2.5 Confiming Your Installation
7.3 Bullsoft JOnAS EJB

______________________________________________________________________

1. Introduction

1.1. Background

This document was started January, 1999 by Gary Meyer (
[email protected]) after several weeks of installing various open source
and proprietary Enterprise Java products for Linux. "Enterprise Java"
is defined as using the Java Enterprise APIs.

1.2. Audience

This HOWTO is intended to benefit software professionals who are
interested in evaluating, developing, or deploying Enterprise Java on
Linux. Limited knowledge or experience in either Linux or Java is
assumed.

1.3. New Versions

The newest version of this document can be found at the author's
website at http://24.8.19.113/ej4linux.html.

1.4. Copyrights and License

Copyright (c) 1999 Gary Meyer.

This document may be distributed only subject to the terms and
conditions set forth in the LDP License at
http://www.linuxdoc.org/COPYRIGHT.html. This document must not be
distributed in modified form without the author's consent.

1.5. Disclaimers

The suggestions in this document are provided to help you get a
Enterprise Java environment on Linux up and running as quickly as
possible. The suggestions are not product recommendations or
endorsements. As you become familiar with the options available, you
can do you own product evaluations and determine what options are best
for your particular purpose.

For the purpose of this HOWTO, "Enterprise Java" is defined as using
the Java Enterprise APIs. This HOWTO does not address scalability,
availability, manageability, and other such aspects of software that
are often associated with the word "enterprise."

1.6. Potential Future Sections

This HOW has focused on the most popular aspects of Enterprise Java.
The following sections may be added to this HOWTO.

o Integrated Development Environments (IDEs) that Support Enterprise
Java for Linux

o Java Naming and Directory Interface (JNDI) Support

o Java Mail API (JMAPI) Support

o Java Transaction Service (JTS) Support

o Java Interface Definition Language (JIDL) Support

o Java Messaging Service (JMS) Support

o Common Object Request Broker Architecture (CORBA) Support

Interested in authoring a section?

Please contact the author, Gary Meyer, at ( [email protected]).

1.7. Other Resources

The App-Serv Center website at http://www.app-serv.com/.

Java Enterprise in a Nutshell by David Flanagan et al at
http://www.oreilly.com/catalog/jentnut/.

1.8. Feedback

Please submit all additions and corrections to the author, Gary Meyer,
at ([email protected]).

2. How to Setup the Java Development Kit

There are several Java Development Kits available for Linux. These
include:

o ``Blackdown JDK''

o ``IBM Java Developer Kit ''

o ``Sun J2SE ''

o ``Kaffe ''

If you are going to try just one JDK, I suggest you initially try the
Sun J2SE, unless you are recommended otherwise by specific software
you are using or want to use. Additionally, if you are interested in
an open source implementation, you will need to use Kaffe.

2.1. Blackdown JDK

2.1.1. Background

The Blackdown JDK is a port of Sun JDK to Linux. As of the time of
this writing, the Blackdown JDK is current with JDK 1.2.2 on the Intel
architecture and 1.1.8 on the PowerPC.

In December 1999, Sun announced availability of the Java 2 Platform,
Standard Endition (J2SE) on Linux. This Sun release has significant
impact on Blackdown because Blackdown is a port. In a press release,
Sun states, "This week's announcement would not have been possible
without the collaboration of Blackdown, a group of developers and
enthusiasts around the globe. Since its inception, Blackdown has been
a provider of Java technology for the Linux platform. Their dedicated
effort over a number of years has laid the foundation for this release
of the Java 2 platform port to Linux; in particular their effort was
critical to the success of this release."

Additionally, the Sun press release continues, "Blackdown.org
continues to be a valuable source for Java technology for Linux,
including JDK 1.1.x releases."

2.1.2. Download

The Blackdown JDK can be obtained from http://www.blackdown.org.

>From the Blackdown home page, select download and a mirror site.

Select the version of the JDK you want. If other software that you
are wanting to use does not recommend a specific version, I suggest
the most current, which is at the time of this writing, JDK 1.2.2.

Select the machine architecture you are installing on. For Intel
architecture, select i386.

Select the release candidate you want. If other software that you are
wanting to use does not recommend a specific release candidate, I
suggest the most recent or final version if available.

For the Blackdown JDK, there are possibly a number of different files
available in different packaging formats. Additionally you have to be
sure you get support for the right libc for your Linux distribution.

The files available include:

o jdk - The Java Development Kit contains everything you need to
compile, run, and debug Java. It does not contain international
character converters.

o jre - The Java Runtime Environment, including international
character converters.

o rt - A minimal Java Runtime Environment that does not include
international character converters.

o i18n - The internationalization font mappings and a JAR containing
the international character converters.

o native - Additional binaries providing native thread support.

I suggest downloading only the jdk for Java development in English.

When downloading the Blackdown files, you may need to select between
libc5 and glibc as well as potentially a specific version of glibc.
The libc options include:

o libc5 - The older, and still most common, Linux libc is libc5.

o glibc - The new Linux libc.

If you are using a newer distribution of Linux, you will most likely
have glibc. I suggest initially trying glibc.

2.1.3. Installation

I suggest installing files in the /usr/local directory. After
downloading the files, run:

mkdir /usr/local/blackdown
mv jdk* /usr/local/blackdown

If you downloaded the tarball format, run:

tar zxvf [filename].tar.gz

Where [filename] is the name of the file.

Under the /usr/local/blackdown directory, you now should see a
directory such as jdk1.2.2.

The above example shows JDK 1.2.2 release candidate 3 for the Intel
architecture. Substitute the file name, version number, release
candidate number, and architecture as appropriate. You will need to
open each distribution package file in the above manner.

2.1.4. Setting up Your Environment

The environment variables to set up are:

o JAVA_HOME

o PATH

o CLASSPATH

The JAVA_HOME environment variable references the home directory of
your JDK installation. Set your JAVA_HOME environment variable to the
directory into which you just installed a version of the Blackdown
JDK.

export JAVA_HOME=/usr/local/blackdown/jdk1.2.2

The $JAVA_HOME/bin directory has the Java compiler (javac) and the
Java Virtual Machine (java) as well as other necessary programs for
development. Add $JAVA_HOME/bin to your PATH.

export PATH=$JAVA_HOME/bin:$PATH

Note that $JAVA_HOME/bin was added to the front of the PATH so that
the installed JDK will be used rather than any JDK that might have
come with your Linux distribution.

To confirm that your PATH is correctly set up, check which Java
compiler and JVM will be used.

which javac
which java

The output should reference javac and java in your $JAVA_HOME/bin
directory.

The CLASSPATH environment variable references all JARs and directories
that you will need to compile and run Java programs.

For JDK 1.2.2, you don't need to initially add any JARs to your
CLASSPATH. JARs can be packaged in either .jar or .zip files.

export CLASSPATH=$CLASSPATH:.

2.1.5. Confirming Your Installation

You are now ready to compile and run a simple application. Create the
following program.

class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello, World!");
}
}

Compile the program with the Java compiler.

javac HelloWorld.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java HelloWorld

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, World!

Congratulations, you have installed, set up an environment for, and
tested the Blackdown JDK on Linux.

2.1.6. More Information

For more information on the Blackdown JDK, see the Blackdown website
at http://www.blackdown.org. There is an excellent FAQ available.

2.2. IBM Java Developer Kit

2.2.1. Background

The IBM Java Developer Kit and Runtime Environment pass Sun's Java
compatibility test and include the latest maintenance. (From the IBM
website.)

As of the time of this writing, the IBM Java Developer Kit is current
with JDK 1.1.8 and is available only on the Intel architecture.

2.2.2. Download

The IBM Java Developer Kit can be obtained from
http://www.ibm.com/java/jdk/118/linux.

In order to download, you will have to register with the IBM website
and agree to the license online.

The files available include:

o ibm-jdk-l118-linux-x86.tgz - The Java Development Kit contains
everything you need to compile, run, and debug Java.

o ibm-jre-l118-linux-x86.tgz - The Java Runtime Environment contains
everything you need to run Java.

Since you will be doing Java development, I suggest downloading the
ibm-jdk tarball file.

2.2.3. Installation

I suggest installing files in the /usr/local directory. After
downloading the files, run:

mkdir /usr/local/ibm
mv ibm-jdk-l118-linux-x86.tgz /usr/local/ibm

You can now open the distribution package. To do this, type:

tar zxvf ibm-jdk-l118-linux-x86.tgz

Under the /usr/local/ibm directory, you now should see the jdk118
directory.

The above example shows JDK 1.1.8 for the Intel architecture.
Substitute the filenames as appropriate.

2.2.4. Setting up Your Environment

The environment variables to set up are:

o JAVA_HOME

o PATH

o CLASSPATH

The JAVA_HOME environment variable references the home directory of
your JDK installation. Set your JAVA_HOME environment variable to the
directory into which you just installed a version of the IBM Java
Developer Kit.

export JAVA_HOME=/usr/local/ibm/jdk118

The $JAVA_HOME/bin directory has the Java compiler (javac) and the
Java Virtual Machine (java) as well as other necessary programs for
development. Add $JAVA_HOME/bin to your PATH.

export PATH=$JAVA_HOME/bin:$PATH

Note that $JAVA_HOME/bin was added to the front of the PATH so that
the installed JDK will be used rather than any JDK that might have
come with your Linux distribution.

To confirm that your PATH is correctly set up, check which Java
compiler and JVM will be used.

which javac
which java

The output should reference javac and java in your $JAVA_HOME/bin
directory.
The CLASSPATH environment variable references all JARs and directories
that you will need to compile and run Java programs.

Initially I suggest adding the following JARs to your CLASSPATH. JARs
can be packaged in either .jar or .zip files.

For instance:

export CLASSPATH=$JAVA_HOME/lib/classes.zip
export CLASSPATH=$CLASSPATH:.

2.2.5. Confirming Your Installation

You are now ready to compile and run a simple application. Create the
following program.

class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello, World!");
}
}

Compile the program with the Java compiler.

javac HelloWorld.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java HelloWorld

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, World!

Congratulations, you have installed, set up an environment for, and
tested the IBM Java Developer Kit on Linux.

2.2.6. More Information

For more information on the IBM Java Developer Kit, see the IBM Java
website at http://www.ibm.com/java.

2.3. Kaffe

2.3.1. Background

Kaffe is a cleanroom, open source implmentation of a Java Virtual
Machine and class libraries. As of the time of this writing, Kaffe
"mostly complies with JDK 1.1, except for a few missing parts." And
"parts of it are already JDK 1.2 (Java 2) compatible." (From the
Kaffe website.)

Kaffe may have already been shipped with your Linux distribution
because of its open source license.

2.3.2. Download and Installation

Rather than downloading from Kaffe, I suggest you initially try the
Kaffe that most likely came with your Linux distribution.

Alternatively, Kaffe can be obtained from http://www.kaffe.org.

>From the Kaffe home page, select the current release. At the time of
this writing, the current release is 1.0.5. The Kaffe version number
has no relationship to JDK specification version numbers.

2.3.3. Setting up Your Environment

The environment variables to set up are:

o PATH

o CLASSPATH

To confirm that your PATH is correctly set up, check which Java
compiler and JVM will be used.

which javac
which java

The CLASSPATH environment variable references all JARs and directories
that you will need to compile and run Java programs.

Initially I suggest you add the following JARs to your CLASSPATH. JARs
can be packaged in either .jar or .zip files.

For instance:

export CLASSPATH=/usr/local/share/kaffe/Klasses.zip
export CLASSPATH=$CLASSPATH:.

2.3.4. Confirming Your Installation

You are now ready to compile and run a simple application. Create the
following program.

class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello, World!");
}
}

Compile the program with the Java compiler.

javac HelloWorld.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java HelloWorld

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, World!

Congratulations, you have installed, set up an environment for, and
tested Kaffe on Linux.

2.3.5. More Information

For more information on Kaffe, see the Kaffe website at
http://www.kaffe.org.

2.4. Sun J2SE

2.4.1. Background

The Sun Java 2, Standard Edition (J2SE) is Sun's production release of
the Java 2 Platform for the Linux operating system. As of the time of
this writing, J2SE is current with JDK 1.2.2 on the Intel
architecture.

2.4.2. Download

J2SE can be obtained from
http://developer.java.sun.com/developer/earlyAccess/j2sdk122.

You will need to register with Sun and agree to the license online
before downloading.

2.4.3. Installation

I suggest installing files in the /usr/local directory. After
downloading the files, run:
mkdir /usr/local/sun
mv jdk1_2_2rc1-linux-i386.tar.gz /usr/local/sun

You can now open the distribution package. To do this, type:

tar zxvf jdk1_2_2rc1-linux-i386.tar.gz

Under the /usr/local/sun directory, you now should see the jdk1.2.2
directory.

The above example shows JDK 1.2.2 release candidate 1 for the Intel
architecture. Substitute the filenames as appropriate.

2.4.4. Setting up Your Environment

The environment variables to set up are:

o JAVA_HOME

o PATH

o CLASSPATH

The JAVA_HOME environment variable references the home directory of
your JDK installation. Set your JAVA_HOME environment variable to the
directory into which you just installed a version of J2SE.

export JAVA_HOME=/usr/local/sun/jdk1.2.2

The $JAVA_HOME/bin directory has the Java compiler (javac) and the
Java Virtual Machine (java) as well as other necessary programs for
development. Add $JAVA_HOME/bin to your PATH.

export PATH=$JAVA_HOME/bin:$PATH

Note that $JAVA_HOME/bin was added to the front of the PATH so that
the installed JDK will be used rather than any JDK that might have
come with your Linux distribution.

To confirm that your PATH is correctly set up, check which Java
compiler and JVM will be used.

which javac
which java

The output should reference javac and java in your $JAVA_HOME/bin
directory.

The CLASSPATH environment variable references all JARs and directories
that you will need to compile and run Java programs.

For JDK 1.2.2, you don't need to initially add any JARs to your
CLASSPATH. JARs can be packaged in either .jar or .zip files.

export CLASSPATH=$CLASSPATH:.

2.4.5. Confirming Your Installation

You are now ready to compile and run a simple application. Create the
following program.

class HelloWorld {
public static void main (String[] args) {
System.out.println("Hello, World!");
}
}

Compile the program with the Java compiler.

javac HelloWorld.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java HelloWorld

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, World!

Congratulations, you have installed, set up an environment for, and
tested the Sun J2SE for Linux.

2.4.6. More Information

For more information on Sun J2SE, see the Sun Java website at
http://java.sun.com. There are excellent discussion forums available
where you might be able to find answers to various questions.

3. How to Setup the Web Server

There are several Web Servers available for Linux. These include:

o ``Apache ''

o ``IBM Domino ''

o ``IBM HTTP Server ''

If you are going to try just one Web Server, I suggest you initially
try Apache, principally because it comes with most major Linux
distributions and may already be installed, and perhaps running, on
your system.
3.1. Apache

3.1.1. Background

Apache is the most popular HTTP server on the Internet. It was
originally based upon the NCSA httpd and has since been completely
rewritten. It is Open Source licensed. (From the Apache website.)

3.1.2. Download, Installation, and Setting up Your Environment

Rather than downloading from Apache, I suggest you initially try the
Apache that most likely came with your Linux distribution.

Alternatively, Apache can be obtained from http://www.apache.org.

3.1.3. Confirming Your Installation

To confirm that Apache is installed and running on your computer, open
your web browser, and enter the URL: "http://127.0.0.1". (127.0.0.1
is the IP address for the localhost.)

You should see a web page to the effect of "It Worked!"

If it did not work, you can confirm that Apache is installed by typing
the following on a RedHat Package Manager (RPM)-based Linux
distribution.

rpm -q | grep apache

To start Apache, type:

cd /etc/rc.d/init.d
./httpd start

Note: The httpd script used at boot time may be in a different
location on other Linux distributions.

For more assistance, I suggest you look into the Apache FAQ at
http://www.apache.org/docs/misc/FAQ.html.

3.2. IBM Domino

To be written.

See http://www.lotus.com/dominolinuxfor more information.

3.3. IBM HTTP Server

3.3.1. Background

The IBM HTTP Server is an IBM repackaging of Apache. You might
consider using the IBM HTTP Server if you plan on working with IBM
WebSphere.

At the time of this writing, the most recent version is 1.3.6.1.

3.3.2. Download

The IBM HTTP Server can be obtained from
http://www-4.ibm.com/software/webservers/httpservers/download.html.

Click on the download link and select 56-bit or 128-bit SSL
encryption.

You will need to register with IBM, fill out a marketing survey, and
accept the license agreement before downloading. The IBM HTTP Server
requires glibc either version 2.0 or 2.1. glibc is the new Linux libc.
If you have an older distribution that is based upon libc5, you will
not be able to use the IBM HTTP Server.

On an RedHat Package Manager (RPM)-based Linux distribution, you can
run:

rpm -qa | grep libc

You will see output such as:

glibc-2.1.2-11
libc-5.3.12-31

This will show you which versions of libc5 and glibc you have
installed on your Linux distribution. In my above example I have both
glibc and libc5 installed on my system. glibc is version 2.1, so I
would want to download the files for glibc2.1.

I suggest downloading all of the tar files for the glib version of
Linux that you have as they are relatively small. However, minimally
you will need the server file. For RedHat 6.0 and distributions
derived from Redhat 6.0 you will also need the redhat60only. For
glibc2.0 based distributions you will also need the libstdc file.

3.3.3. Installation

I suggest installing files in the /usr/local directory. After
downloading the files, run:

mkdir /usr/local/ibm
mv HTTPServer.linux.* /usr/local/ibm

You can now open the distribution package file or files.

tar xvf [filename].tar

Where [filename] is the name of the file.

Under the /usr/local/ibm directory, you now should see the directory
IHS.
Use the RedHat Package Manager (RPM) to install the rpm files that the
tar file produced. If you needed the libstdc file, you will need to
install that file first. Then you would install the server RPM file
such as:

cd IHS
rpm -i IBM_HTTP_Server-1.3.6-2.i386.rpm

The above example shows version 1.3.6 for the Intel architecture.
Substitute the filename as appropriate.

After installing you can delete the rpm files as they can be easily
recreated from the tar files.

3.3.4. Setting up Your Environment

The environment variables to set up are:

o PATH

The IBM HTTP Server installed itself into /opt/IBMHTTPServer. You
need to add its bin directory to your PATH.

export PATH=/opt/IBMHTTPServer/bin:$PATH

Note that /opt/IBMHTTPServer/bin was added to the front of the PATH so
that the installed Web Server will be used rather than any Web Server
that might have come with your Linux distribution.

To confirm that your PATH is correctly set up, check which Apache
controller will be used. Type:

which apachectl

The output should reference apachectl in the /opt/IBMHTTPServer/bin
directory.

Note: because the IBM HTTP Server is based upon Apache, it uses the
Apache controller to start and stop it. When you have both the IBM
HTTP Server and Apache installed on a computer, take particular care
to your PATH to make sure you are working with the correct server.

You may need to modify the IBM HTTP Server configuration file. The
configuration file was installed in
/opt/IBMHTTPServer/conf/httpd.conf. The most common two entries that
need to be changed are the ServerName and the Listen port number.
Look for the key words "ServerName" and "Listen" in the httpd.conf
file. The ServerName should be set to either your hostname or IP
address. If your computer uses DHCP to acquire an IP address, the
hostname is a better candidate. However, in order to use your
computer's hostname, your computer's hostname and IP address must be
properly registered in DNS.

Additionally if you are running another Web server on the computer you
need to assign the IBM HTTP Server to another port so you can run both
Web servers simultaneously if necessary.

The following is an example entry in httpd.conf.

ServerName 192.168.0.4
Listen 3000

3.3.5. Confirming Your Installation

To start the IBM HTTP Server, type the following:

/opt/IBMHTTPServer/bin/apachectl start

To confirm that the IBM HTTP Server is installed and running on your
computer, open your web browser, and enter the URL:
"http://192.168.0.4:3000" substituting the correct IP address and port
number entered into httpd.conf.

You should see a web page to the effect of "Welcome to the IBM HTTP
Server". Contratulations, you have installed, set up an environment
for, and tested the IBM HTTP Server for Linux.

3.3.6. More Information

For more information, I suggest you look into the IBM HTTP Server
Support page at
http://www-4.ibm.com/software/webservers/httpservers/support.html.

4. How to Setup Java Servlet Support

There are several Web Server plug-ins and Application Servers
available for Linux that provide support for Java Servlets. These
include:

o ``Allaire JRun''

o ``Apache JServ''

o ``BEA WebLogic''

o ``Enhydra''

o ``Locomotive''

o ``IBM Websphere ''

If you are going to try just one, I suggest you initially try Apache
JServ.

4.1. Allaire JRun

To be written.

See http://www.allaire.com/products/jrun/for more information.

4.2. Apache JServ

4.2.1. Background

Apache JServe is a 100% pure Java servlet engine fully compliant with
the Java Servlet 2.0 specification. Apache JServ is part of the Java
Apache Project. (From the Apache Java Project website).

4.2.2. Download

Apache JServ can be obtained from
http://java.apache.org/jserv/index.html.

>From the Apache JServ Project home page, follow the Download Apache
JServ link.

Currently RPM distributions are available for RedHat Linux. For other
Linux distributions you will have to build from source. The following
example describes how install the RPM for RedHat 6x.

As of the time of this writing, the current version is 1.1b3.

4.2.3. Installation

I suggest installing files in the /usr/local directory. After
downloading the files, run:

mkdir /usr/local/apachejserv
mv ApacheJServ*.rpm /usr/local/apachejserv

For RedHat and RedHat-derived distributions, use the RedHat Package
Manager (RPM) to install the rpm file such as:

rpm -i ApacheJServ-1.1-b2_RH6x.i386.rpm

The above example shows version 1.1-b2 for the RedHat 6x on the Intel
architecture.

4.2.4. Setting up Your Environment

You will need to stop, set your Java environment variables, and
restart Apache to register Apache JServ.

To stop Apache, type:

cd /etc/rc.d/init.d
./httpd stop

Note: The httpd script used at boot time may be in a different
location on other Linux distributions

To set you Java environment, see the How to Install the JDK section of
this document, specifically for the JDK you intend to use. You need
to set several properties in the jserv.properties file installed in
/etc/httpd/conf/jserv. Specifically, look for:

o wrapper.bin - to reference the JDK you installed

o wrapper.classpath - to minimally include
/usr/lib/apache/ApacheJServ.jar and
/home/httpd/classes/servlet-2.0.jar

o bindaddress=localhost

o port=8007

To restart Apache, type:

cd /etc/rc.d/init.d
./httpd start

4.2.5. Confirming Your Installation

To confirm that the Apache JServ is installed and running on your
computer, open your web browser, and enter the URL:
"http://127.0.0.1/servlet/IsItWorking" substituting the correct IP
address if you are browsing from another machine.

You should see a web page to the effect of "Yes, It's Working!".
Contratulations, you have installed, set up an environment for, and
tested the Apache JServ for Linux.

For more assistance, I suggest you look into the Apache JServ website
at

http://java.apache.org/jserv/index.html.

Now, to compile and run your own servlet. Enter the following Java
servlet program.

import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;

public class HelloWorldServlet extends HttpServlet {
public void service (HttpServletRequest request,
HttpServletResponse response) throws ServletException, IOException {
}
}

4.2.6. More Information

For more information, I suggest you look into the Java Apache Project
website at http://java.apache.org/.

4.3. BEA WebLogic

See ``BEA WegLogic ''below.

4.4. Enhydra

To be written.

See http://www.enhydra.orgfor more information.

4.5. IBM WebSphere

To be written.

See http://www-4.ibm.com/software/webservers/appserv/linux.htmlfor
more information.

4.6. Locomotive

To be written.

See ://www.locomotive.org/for more information.

5. How to Setup Java Server Pages (JSP) Support

To be written.

5.1. Apache Jakarta

To be written.

See ://jakarta.apache.com/for more information.

5.2. Caucho Resin

To be written.

See ://www.caucho.com/for more information.

6. How to Setup JDBC Support

There are several databases that run on Linux that also support a JDBC
interface. These include:

o ``IBM DB2 ''

o ``MiniSQL ''

o ``MySQL ''

o ``Oracle ''

o ``PostgreSQL ''

o ``Sybase ''

If you are going to try just one DBMS, I suggest you initially try
PostgreSQL, principally because it comes with most major Linux
distributions and may already be installed on your system.

6.1. IBM DB2

To be written.

See http://www-4.ibm.com/software/data/db2/linux/for more information.

6.2. MiniSQL

To be written.

See http://www.hughes.com.au/for more information.

6.3. MySQL

To be written.

See http://www.mysql.org/for more information.

6.4. Oracle

To be written.

See http://platforms.oracle.com/linux/

6.5. PostgreSQL

6.5.1. Background

PostgreSQL is a sophisticated Object-Relational DBMS, supporting
almost all SQL constructs, including subselects, transactions, and
user-defined types and functions. It is the most advanced open-source
database available anywhere. Commercial Support is also available
from PostgreSQL, Inc. The current version is 6.5.3 and is available
at any of the many mirror sites or on CD. (From the PostgreSQL
website.)

PostgreSQL may have already been shipped with your Linux distribution
because of its open source license.

6.5.2. Download and Installation

Rather than downloading from PostgreSQL, I suggest you initially try
the PostgreSQL that most likely came with your Linux distribution.

Alternatively, PostgreSQL can be obtained from
http://www.postgresql.org.

To confirm that PostgreSQL is installed on your computer, type:

rpm -qa | grep postgresql

or

which postmaster
which psql

You need the postgresql, postgresql-server, and postgresql-java
packages installed to use Java with PostgreSQL.

Make sure PostgreSQL is running. Type:

ps -f -u postgres

You should see postmaster, the PostgreSQL daemon, running.

If postmaster is not running, there will probably be a Sys V Init
script that you can use to start it. In many distributions it is
located in /etc/rc.d/init.d. To start PostgreSQL, type:

cd /etc/rc.d/init.d
./postgresql start

You can use the above "ps" command to confirm that PostgreSQL is
running.

Note: To use JDBC, PostgreSQL needs to have been started with the '-i'
parameter indicating support for TCP/IP connections rather than solely
UNIX domain sockets. Confirm that postmaster> was started with the
'-i' paramter.

Create a test database by typing:

su - postgres
createdb javatest

You should see no error messages.

Create a test table with one test row. First, log in to the
interactive PostgreSQL tool and connect to the javatest database you
just created by typing (as the postgres user):

psql javatest

You should see confirmation that you are connected to the database:
javatest.

Then, create the test table by typing (within psql):

create table test (col1 varchar(255));

You should see the "CREATE" confirmation message.

Next, insert one row by typing (within psql):

insert into test (col1) values ('Hello, from PostgreSQL!');

You should see the "INSERT" confirmation message.

Finally, confirm that the row is there by typing (within psql):

select col1 from test;

You should see the row you just created.

You can exit psql by typing "\ q".

For more assistance on working with PostgreSQL, I suggest you look
into the Database-SQL-RDBMS HOW-TO document for Linux (PostgreSQL
Object Relational Database System) at
http://metalab.unc.edu/mdw/HOWTO/PostgreSQL-HOWTO.html.

You will need to add the appropriate JAR to your CLASSPATH. The
PostgreSQL JARs come in the postgresql-jdbc package.

export CLASSPATH=$CLASSPATH:/usr/lib/pgsql/jdbc6.5-1.2.jar

You may need to substitute the path depending you where PostgreSQL is
installed on your system.

6.5.3. Confirming Your Installation

You are now ready to compile and run a simple JDBC application that
uses PostgreSQL. Create the following program.

import java.sql.*;

class PostgreSQLTest {
public static void main (String[] args) {
try {
Driver driver = (Driver)
Class.forName("postgresql.Driver").newInstance();
DriverManager.registerDriver(driver);

String url = "jdbc:postgresql:javatest";
Connection con = DriverManager.getConnection(url, "postgres", "");
Statement stm = con.createStatement();

stm.setQueryTimeout(10);
ResultSet rs = stm.executeQuery("select col1 from test");

rs.next();

System.out.println(rs.getString(1));

} catch (SQLException e) {

System.out.println("Exception!");
System.out.println(e.toString());
}
}

Compile the program with the Java compiler.

javac PostgreSQLTest.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java PostgreSQLTest

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, from PostgreSQL!

Congratulations, you have installed, set up an environment for, and
tested a JDBC interface to PostgreSQL.

6.5.4. More Information

For more information, I suggest you look into the PostgreSQL website
at

http://www.postgresql.org/.

6.6. Sybase

6.6.1. Background

Sybase Adaptive Server Enterprise is a commericial RDBMS that is
available for the Linux operating system. While Sybase has recently
released version 12.0, version 11.9.2 is available for Linux.

According to the Sybase website, "By porting ASE to Linux, Sybase
provides the Linux development community with the first highly
scalable, high-performance database engine available for the platform.
The package includes the standard features of Adaptive Server
Enterprise and all related connectivity components. Adaptive Server
Enterprise 11.9.2 is offered FREE for development."

6.6.2. Download

The Sybase ASE can be obtained from
http://www.sybase.com/products/databaseservers/linux/linux1192_reg.html.

In order to download, you will have to register with the Sybase
website and agree to the license online.

The Sybase JDBC driver can be obtained from
http://www.sybase.com/products/internet/jconnect/.

Select download jConnect 4.2/5.2.

If you have access to a Sybase server on the network, you only need to
download and install the JDBC driver.

6.6.3. Installation

Installation of Sybase is beyond the scope of this HOWTO. This HOWTO
will assume that Sybase has been correctly installed and configured
and that you can get to Sybase using isql.

Log into isql as sa and create a test user and test database by
typing:

create database javatest
go
sp_addlogin javatest, javatest, javatest
go
use javatest
go
sp_dbowner javatest
go

You should see no error messages.

Create a test table with one test row. First, log in to isql as the
javatest user and type:

create table test (col1 varchar(255))
go

You should see no error messages.

Next, insert one row by typing:

insert into test (col1) values ('Hello, from Sybase!')
go

You should see no error messages.

Finally, confirm that the row is there by typing:

select col1 from test
go

You should see the row you just created.

You can exit isql by typing "exit".

For more assistance on working with Sybase, review the documentation
that can be downloaded with Sybase.

You will need to add the appropriate JAR to your CLASSPATH.

export CLASSPATH=$CLASSPATH:/usr/local/sybase/jConnect-5_2/classes/jconn2.jar

You may need to substitute the path depending you where jConnect is
installed on your system.

6.6.4. Confirming Your Installation

You are now ready to compile and run a simple JDBC application that
uses Sybase. Create the following program.

import java.sql.*;

class SybaseTest {
public static void main (String[] args) {
try {
Driver driver = (Driver)
Class.forName("com.sybase.jdbc2.jdbc.SybDriver").newInstance();
DriverManager.registerDriver(driver);

String host = "127.0.0.1";
String port = "4100";

String url = "jdbc:sybase:Tds:" + host + ":" + port;
Connection con = DriverManager.getConnection(url, "javatest", "javatest");
Statement stm = con.createStatement();

stm.setQueryTimeout(10);
ResultSet rs = stm.executeQuery("select col1 from test");

rs.next();

System.out.println(rs.getString(1));

} catch (SQLException e) {

System.out.println("Exception!");
System.out.println(e.toString());
}
}

You will need to substitute the host and port number of you Sybase
server as appropriate. See $SYBASE/interfaces and the $DSQUERY entry
for what values to use for the host and port number.

Compile the program with the Java compiler.

javac SybaseTest.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Run the program with the JVM.

java SybaseTest

If the JVM produces errors, confirm your PATH and CLASSPATH.

You should see the following output:

Hello, from Sybase!

Congratulations, you have installed, set up an environment for, and
tested a JDBC interface to Sybase.

6.6.5. More Information

For more information, I suggest you look into the Sybase jConnect
website at http://www.sybase.com/products/internet/jconnect/.

7. How to Setup Enterprise Java Bean (EJB) Support

To be written.

7.1. BEA WebLogic

To be written.

See http://www.beasys.com/linux/for more information.

7.2. EJBoss

7.2.1. Background

The EJBoss organization strives at delivering a complete J2EE
compliant platform to the open source web. (From the EJBoss website).

As of the time of this writing, the most recent version is 0.95.

7.2.2. Download

EJBoss can be downloaded from the Telkel website at
http://www.telkel.com/ejboss.

As no implementation for JDK 1.3 is available for Linux, select
ejboss095_jdk122.jar.

7.2.3. Installation

I suggest installing files in the /usr/local directory. After
downloading, run:

mkdir /usr/local/ejboss
mv ejboss* /usr/local/ejboss

Unjar the file:

jar xvf ejboss095_jdk122.jar

You should see various files and directories created under
/usr/local/ejboss.

The above example shows EJBoss 0.95 for JDK 1.2.2. Substitute the file
names as appropriate.

7.2.4. Setting up Your Environment

The environment variables to set up are:

o CLASSPATH

The CLASSPATH environment variable references all JARs and directories
that you will need to compile and run Java programs.

Include the EJBoss JAR and the beans/generated directory in your
CLASSPATH.

export CLASSPATH=/usr/local/ejboss/lib/ejboss095_jdk122.jar:/usr/local/ejboss/beans/generated:$CLASSPATH

7.2.5. Confiming Your Installation

You are now ready to compile and run a simple EJB application. Create
the following three source files for the server.

First, the business interface.

// EJBTest.java

import javax.ejb.*;
import java.rmi.RemoteException;

public
interface EJBTest extends EJBObject {
public String greet() throws
RemoteException;

}

Second, the home interface.

// EJBTestHome.java

import javax.ejb.*;
import java.rmi.RemoteException;

public
interface EJBTestHome extends EJBHome {

public EJBTest create() throws

CreateException, RemoteException;
}

Third, the bean implementation class.

// EJBTestBean.java

import javax.ejb.*;
import java.rmi.RemoteException;

public
interface EJBTestBean implements SessionBean {

private SessionContext
mContext = null;

public void ejbPassivate() {
System.out.println("EJBTestBean
passivated.");
}

public void ejbActivate() {
System.out.println("EJBTestBean
activated.");
}

public void ejbCreate() {
System.out.println("EJBTestBean
created.");
}

public void ejbRemove() {
System.out.println("EJBTestBean
removed.");
}

public void setSessionContext() {
System.out.println("EJBTestBean
context set.");
mContext = context;
}

public String greet()
{
return "Hello, I'm an EJB!";
}

}

Compile the server source files with the Java compiler:

javac EJBTest*.java

If the compiler produces errors, double check the syntax and confirm
your PATH and CLASSPATH.

Now that you have successfully written and compiled the server source
files, you need to deploy your bean to EJBoss. Deploying a bean to
EJBoss requires several steps that must be performed exactly.

First, create the file ejb-jar.xml.

<?xml version="1.0" encoding="Cp1252"?>

<ejb-jar ID="">

<description></description>

<display-name></display-name>

<small-icon></small-icon>

<large-icon></large-icon>

<ejb-client-jar></ejb-client-jar>

<enterprise-beans>

<session>

<description>Nextgen bean</description>

<ejb-name>nextgen.EJBTest</ejb-name>

<home>EJBTestHome</home>

<remote>EJBTest</remote>

<ejb-class>EJBTestBean</ejb-class>

<session-type>Stateful</session-type>

<transaction-type>Bean</transaction-type>

<env-entry>

<description></description>

<env-entry-name></env-entry-name>

<env-entry-type>java.lang.String</env-entry-type>

<env-entry-value></env-entry-value>

</env-entry>

<resource-ref>

<description></description>

<res-ref-name></res-ref-name>

<res-type></res-type>

<res-auth>Container</res-auth>

</resource-ref>

</session>

</enterprise-beans>

<assembly-descriptor />

</ejb-jar>

The above file, which must be named ejb-jar.xml identifies the
interface and class names of files that you just created as well as a
name for the object.

Second, relative to the directory of the three class files you just
created, create a META-INF directory.

mkdir META-INF
mv ejb-jar.xml META-INF

Third, package all four files into a jar.

jar cvf EJBTest.jar EJBTest*.class META-INF/ejb-jar.xml

You should see that it added the manifest as well as the three class
files and the XML deployment descriptor file.

Fourth, put the JAR you just created in the EJBoss beans directory.

mv EJBTest.jar /usr/local/ejboss/beans

Fifth, move the class files you created to the EJBoss beans/generated
directory.

mv EJBTest*.class /usr/local/ejboss/beans/generated

(This fifth step is redudant due to a bug in EJBoss 0.95. )

You are now ready to start the EJBoss server.

cd /usr/local/ejboss

sh server.sh

You should see the proxy files compile automatically and confirmation
that your EJB is deployed.

You are now ready to write, compile and test the simple client
applicaiton.

7.3. Bullsoft JOnAS EJB

To be written.

See http://www.bullsoft.com/ejb/for more information.