### Language Specification
#lang ru_RU.KOI8-R
lang en_US

### Network Configuration
network --bootproto dhcp
#network --bootproto static --ip 192.168.0.1 --netmask 255.255.254.0 --gateway 192.168.0.1 --nameserver 192.168.0.254

### Source File Location
#cdrom
nfs --server porkchop.redhat.com --dir /mnt/dist/6.2/i386

### Ethernet Device Configuration
#device ethernet wd --opts "io=0x280, irq=3"

### Keyboard Configuration
### Will get set to 'us' by default
### if nothing specified in /etc/sysconfig/keyboard
keyboard us

### Partitioning Information
### Whether to clear out the Master Boot Record (yes/no)
### Which partitions to format (--linux/--all)
###      --linux - only format existing linux partitions
###      --all   - format all existing partitions
### Which partitions to set up on new system as well
### as size of those partitions
zerombr yes
clearpart --linux
part /boot --size 16
part swap --size 127
part / --size 1000 --grow --maxsize 1400
#part raid.0 --size 80
#part raid.1 --size 80
#raid swap raid.0 raid.1 --level 1 --device md0
install

### Mouse Configuration
### Will only setup 3 types of mice
###     generic        - 2-button serial
###     genericps/2    - 2-button ps/2
###     msintellips/2  - MS Intellimouse
### All three can be setup with or without 3-button
### emulation
### Run 'mouseconfig --help' in order to see other
### supported mouse type and make appropriate change
### NOTE: You will need to run 'mouseconfig' manually
### after installation if you have a non-ps/2 mouse
### and are installing X, as a ps/2 mouse is setup
### by default
#mouse generic --device ttyS0
mouse generic3ps/2

### Time Zone Configuration
### Will get set to 'US/Eastern' if ZONE is missing
### from /etc/sysconfig/clock or if file is missing entirely
timezone --utc US/Eastern

### X Configuration
### Will set up system for minimal resolution and color depth;
### may wish to run Xconfigurator manually after system installation
#xconfig --server "SVGA" --monitor "viewsonic g773"

### Root Password Designation
### '--iscrypted' does not work properly with release 6.1 as shipped;
### will need to get updates from http://support.redhat.com/errata
### in order for this to work correctly; can also just specify
### root password in plain text and change it after system installation;
### e.g. 'rootpw ThisIsThePassword' will get root's password to
### "ThisIsThePassword"
rootpw paSSword

### Authorization Configuration
#auth --useshadow --enablemd5
auth --enablemd5

### Lilo Configuration
### Does not support pulling kernel 'append' arguments, but those
### can be added into config file using '--append' argument;
### e.g. 'lilo --append "mem=128M" --location mbr' will put the
### memory argument in the /etc/lilo.conf file at install
lilo --location mbr
#lilo --location none

### Package Designation
### The package names, as well as the groups they are a part of can be
### found in the /RedHat/base/comps file; individual packages can be
### specified by entering their names one per line;
### groups (e.g. 'X Window System') can be specified
### by appending a "@" in front of the group name;
### e.g. '@ X Window System'
%packages
python
@ X Window System

### Commands To Be Run Post-Installation
%post
echo "This is in the chroot" > /tmp/message

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.