Path: nntp.hut.fi!news.csc.fi!news.eunet.fi!EU.net!news-peer.gsl.net!news.gsl.net!portc01.blue.aol.com!newsstand.cit.cornell.edu!lnsnews.lns.cornell.edu!lns62.lns.cornell.edu!PVHP
From:
[email protected] (Peter Prymmer)
Newsgroups: comp.lang.perl.tk,comp.lang.perl.announce,comp.answers,news.answers
Subject: comp.lang.perl.tk FAQ part1 of 5
Followup-To: comp.lang.perl.tk
Date: Mon, 07 Oct 1996 17:12:01 GMT
Organization: Wilson Lab, Cornell U., Ithaca, NY, 14853
Lines: 1025
Approved:
[email protected] (Peter Prymmer)
Expires: Mon, 11 Nov 1996 18:10:59 GMT
Message-ID: <
[email protected]>
Reply-To:
[email protected]
NNTP-Posting-Host: lns62.lns.cornell.edu
Xref: nntp.hut.fi comp.lang.perl.tk:3229 comp.lang.perl.announce:451 comp.answers:21333 news.answers:82586
Archive-name: perl-faq/ptk-faq/part1
Posting-Frequency: monthly
Last-modified: Sun Oct 6 16:55:40 PDT 1996
URL:
http://w4.lns.cornell.edu/~pvhp/ptk/ptkFAQ.html
Version: 1.00
URL (Hypertext-split):
http://w4.lns.cornell.edu/~pvhp/ptk/ptkTOC.html
URL (Plaintext):
http://w4.lns.cornell.edu/~pvhp/ptk/ptkFAQ.txt
Image-supplement:
http://w4.lns.cornell.edu/~pvhp/ptk/ptkIMG.html
ftp-Archive:
ftp://ftp.ccd.bnl.gov/pub/ptk/ptkFAQ.txt
ftp-Archive:
ftp://ftp.wpi.edu/perl5/pTk-FAQ
ftp-Archive:
ftp://rtfm.mit.edu/pub/usenet/perl-faq/ptk-faq/
e-mail-Archive:
[email protected]
gopher-Archive: 128.84.47.153
Perl/Tk FAQ part 1 of 5 - Getting Started
*****************************************
______________________________________________________________________
5. How do I build it?
In general, building perl/Tk requires:
1. A made & installed perl (requires a C language compiler). You may
need different versions of perl depending on which version of Tk
you wish to run.
2. A C language compiler for the Tk code itself.
3. A linkable Xlib (.o, .so, .a, etc.) for X-windows.
Perl/Tk has been successfully built using various vendors' cc compilers, as
well as with the free GNU gcc compiler. A make utility of some sort (
make/gmake) will be extremely helpful.
The versions of the various Perl utilities that you need on hand are roughly
as follows:
Utility Version Tk version/comments
perl 5.001m Tk-b8 (not 5.001n)
perl 5.002 (or 002_01) Tk-b11.02
perl 5.003* (up to 003_05) Tk400.200
MakeMaker 4.18 (or higher) Tk-b8
MakeMaker 5.21 (or higher) Tk-b11+
xsubpp with perl
*Note: Tk400.200 will work with perl5.002 but it requires patching
MM_Util.pm and you are encouraged to upgrade your perl version anyway.
Step - by - step the commands to build the Tk extension to Perl are (for
the dynamically linked version) roughly as follows:
1. make install # the appropriate version of perl.
2. uninstall # prior versions of the Tk extension to perl.
3. gunzip -c Tk400.200.tar.gz | tar xvf -
4. cd Tk400.200
5. read INSTALL
6. perl Makefile.PL
7. make
8. make test
9. make install
For the statically linked version you would `make tkperl` just after
executing the `make` step and before the `make test` step. A relatively
easy way to determine if the perl on your system allows for dynamic
linking was mentioned by Kenneth Albanowski <
[email protected]>. If
the following does not say "dl_none.xs" then you probably do have
dynamically linked perl (or perhaps a very non-Unixy perl):
perl -e 'use Config; print $Config{dlsrc},"\n"'
(thanks to Paul Lussier <
[email protected]> for the correction!).
Here is a little more detailed discussion of each the steps just given:
o Install Perl (5.001m for Tk-b8 [not 5.001n], at least 5.002 for
b11.02) For code locations see a CPAN site (separate question in
this FAQ), the actual installation instructions come bundled in the
perl***.tar.gz distribution file. (Perl Configure & make troubles are
beyond the scope of this FAQ - please see the Perl FAQ itself for
more help with this critical step.)
You can install perl almost anywhere you like by specifying the
-Dprefix=/path argument to sh Configure
o Unpack perl/Tk outside the Perl distribution
(i.e. outside the perl build, perl install, or perl lib areas).
gunzip Tk400.200.tar.gz
tar -xvf Tk400.200.tar
(This Tk400.200/ area will be referred to as your ``Tk build''
directory throughout this document.)
o Read INSTALL carefully
cd Tk400.200
pager INSTALL
where pager is the program you use to scroll through text files
more or less. Be sure to read it and don't just pound away on the
spacebar.
o If necessary remove any previously installed version of perl/Tk
If you had a previously working version of Tk installed, you may
need to resurrect the Makefile for it and execute:
make uninstall
make realclean
before you unpack the new version. (The uninstall target of
MakeMaker is relatively new so please be careful here.)
Also note that as of Tk-b10 there is now an uninstall perl script
in the Tk build directory. Run that script before the perl
Makefile.PL step if you had a previously installed Tk extension
(especially if the version number was prior to b10, e.g. Tk-b9.01 or
Tk-b8).
o Compile and test.
perl Makefile.PL
(see below for more on this step.)
make
(if and only if building static: make tkperl
make test (Tk-b10++ not prior versions)
o Install.
make install
o Play with it.
basic_demo
(modify #! line if necessary, or specify /path/to/perl
./basic_demo)
(warning if you build Tk-b9.01 with perl5.002gamma then change
the line in basic_demo from
use lib ./blib;
to
use lib qw(blib/arch blib/lib);)
On the perl Makefile.PL step it may be necessary to give explicit
locations of the required X11 libraries and/or include headers. For
example:
perl Makefile.PL X11=/usr/local/X11R5
or perhaps different directory tree specification is necessary with your X
installation:
perl Makefile.PL X11INC=/usr/local/share/X11R5/include \
X11LIB=/usr/local/arch/X11R5/lib
There are system and site dependencies in all of the above steps. However,
the largest single source of build trouble comes from not using the latest
versions of the various utilities (C compiler, make, etc.). In particular
ensure that when you say perl Makefile.PL that the perl that gets
invoked is up to date - use which perl and perl -v to determine this.
If necessary specify the full path name to your perl5 interpreter/compiler.
(Some people do not rm their older perl interpreters when upgrading to a
more recent version - beware.)
If you still run into trouble take a look at the INSTALL, the README and
the README file for your specific system (e.g. README.AIX, README.OSF,
etc.). You might also find your system mentioned in the ptk hyper-mail
archive at:
http://pubweb.bnl.gov/~ptk/
or
http://www.rosat.mpe-garching.mpg.de/mailing-lists/ptk/
or
ftp://ftp.ccd.bnl.gov/pub/ptk/archives/
or the Perl 5 Porters page at one of the following URLs:
http://www.rosat.mpe-garching.mpg.de/mailing-lists/Perl5-Porters/
http://www.nicoh.com/cgi-bin/lwgate/PERL5-PORTERS/
http://www.hut.fi/~jhi/perl5-porters.html
If you wish to discuss your Tk build problems with others run and save the
output from the myConfig script in the Tk build directory (the output
may already be in the myConfig.out file from your perl/Tk build
directory), as well as the myconfig script in your perl build directory. It is
often helpful to include the output of either (or both) of these scripts in
your discussion.
Presented here are the beginnings of a list of problems associated with
building perl/Tk on various platforms (for help building perl itself please
refer to the Perl FAQ). This list is in no way complete nor authoritative
(nor is it necessarily even up-to-date!) but simply lists problems people
have reported. Keep in mind that your installation may differ (e.g. location
differences such as /usr/bin/perl vs. /usr/local/bin/perl) even
if its the same platform listed here:
A Sampling of Perl/Tk Platforms:
++++++++++++++++++++++++++++++++
AIX:
As of perl5.002b & Tk-b9.01 README.AIX says no patching is
necessary.
For Tk-b8: modifying the perl.exp file may be necessary. There
is a patch in Tk-b8/README.AIX. It may be necessary to make
regen_headers after the patch.
HPUX:
For Tk-b11: One person reports a need to add #define
TIMEOFDAY_TZ to the tkConfig.h header file in order to
compile on HPUX 9.05.
Previous versions: Most people seem to prefer the dynamic linking
afforded by a recent version of the gcc compiler on this system.
Linux:
John C. Wingenbach indicates that should you encounter an error
message like Cannot find -lX11 anywhere at ./myConfig
line 184 when running your perl Makefile.PL (under
Slakware 3.0) that you should be more specific about -l/path/to
/libX11.a.
Adam Wasserman <
[email protected]> has graciously
provided a compilation of Linux compilation trials & tribulations.
It is an (as yet un-edited) document available at:
http://w4.lns.cornell.edu/~pvhp/ptk/hints/linux_compile.txt
MachTen:
Mark Pease <
[email protected]> mentions that:
I was able to get Tk-b11.02 running under MachTen 2.2
perl5.002_01. I did need to make one change to get a round a
MachTen problem. In pTk/tclUnix.h, pwd.h is included, but it is
also included in pTk/tkPort.h (which is included in Lang.h, which
is use by tclUnixUtil.c, whew!)
MachTen's pwd.h can't be included more that once or you get an
error.
It looked to me like tclUnix.h was only used in tclUnixUtil.c, so I
commented out the #include <pwd.h> in tclUnix.h.
NetBSD:
Jesus M. Gonzalez <
[email protected]> mentions success with:
Tk-b11.01 compiles, installs and runs just out of the box in
NetBSD-1.1/i386. I just followed the INSTALL instructions.
NeXTSTEP:
Gerd Knops recently posted a discussion of the steps to get perl
running on several NeXTSTEPs to p5p.
OS/2:
Ilya Zakharevich <
[email protected]> has compiled a
modified form of Tk-b11.02 to work with the Xfree86 client/server
package, as well more advanced versions working with the Open32
PM package.
OSF/1:
As of perl5.002b & Tk-b9.01 you will probably be able to follow the
usual instructions. John Stoffel <
[email protected]> reports that if
you use gcc (rather than cc) you should use at least version 2.7.2
For Tk-b8: make is reputedly not up to the task on this system.
Tk-b8/README.OSF recommends gmake instead.
Stephane Bortzmeyer <
[email protected]> reports a
successful build with Perl 5.001m, xsubpp 1.922, MakeMaker
4.23. He points out that it was necessary for him to upgrade the
xsubpp and MakeMaker that he received with his copy of
Perl5.001m.
SCO:
For Tk-b8: Eric J. Bohm <
[email protected]> reported a
need to comment out line(s) from myConfig and GNUMakefiles
using GNU make 3.67. (See Tk-b8/README.SCO for specifics.)
SGI (Irix):
For Tk-b11.02: Phillip Moore <
[email protected]> reports a
clean build on IRIX 5.3.
Matthew Black <
[email protected]> recently mentioned a need to
apply "patchSG0000596" to get perl sockets to work. His message
was copywritten and is not included here. Send e-mail to him to
find out where the get "patchSG0000596".
Suns:
SunOS (BSD):
For Tk-b10 on SunOS 4.1.3_U1
using SparcWorks acc 3.0.1 Frederick L. Wagner <
[email protected]>
reports needing to use the perl malloc rather than the system
malloc() when building perl.
For Tk-b8: Tom Tignor <
[email protected]> reports the following
on SunOS (sun4m sparc): Tue, 28 Nov 1995 13:19:42
In trying to make, I got a "write: argument mismatch" error for the
file ptK/Lang.h. I looked at the file and found the offending
function, Tcl_GetOpenFile, which has a third argument called
"doWrite" (not "write") in tkGlue.c. I changed the argument from
"write" to "doWrite" in Lang.h and it's compiling fine (for the
moment. :)
Solaris (System V):
For Tk-b8: There is trouble getting perl to use Socket routines (
i.e. trouble with make perl itself not necessarily trouble with
Tk-b8). See the perl FAQ for more info or the .shar file that
Tom Christiansen occasionally posts to comp.lang.perl.misc.
Further information on perl inter process communication can be
found in the perlipc* files at:
ftp://ftp.perl.com/perl/info/everything_to_know/.
SVR4:
For Tk-b8: Martha G. Armour and Len Reed report on two
separate hardware platforms running SVR4 - extensive details in
Tk-b8/README.SVR4. Interestingly, they report no trouble at all
on Linux.
Ultrix:
Peter Prymmer reports that with Tk-b11 it was necessary to
change the line in Makefile.PL that reads:
'LIBS' => ["$xlib -lX11 -lpt -lsocket -lnsl
-lm"],
to read:
'LIBS' => ["$xlib -lX11 -lpt -lsocket -lnsl -lm
-ldnet"],
because of a newer X11 in /usr/local that needed the DECnet
protocol linking.
John Stoffel reports a successful build of static Tk-b10 on Ultrix
4.5.
non-Unix(ish)es:
++++++++++++++++
Information on non-Unix(ish) perl platforms may be obtained from
newsgroups and email lists as well as a few world wide web sites. For
example, try the Perl 5 Porters (p5p) [page|archives] at one of:
http://www.rosat.mpe-garching.mpg.de/mailing-lists/Perl5-Porters/
http://www.nicoh.com/cgi-bin/lwgate/PERL5-PORTERS/
http://www.hut.fi/~jhi/perl5-porters.html
In general your non-Unix platform must be able to support perl 5 and Xlib
(a C compiler and a make utility are tremendously useful too). If you want
to run perl/Tk on another computer and simply have the display show up
on yours then all you need on your computer is an "X server" The long list
of UNIX and non-unix perl 5 ports, Tcl/Tk ports, and Perl/Tk ports that
used to appear in this FAQ has now moved to a separate web page at:
http://w4.lns.cornell.edu/~pvhp/ptk/ptkPORT.html
______________________________________________________________________
6. Where is the Documentation?
A great deal of Perl/Tk documentation gets installed as part of the Tk
extension building process. Hence, a great deal of documentation is
probably residing on your computer already.
More documentation is "in the works": there are several books dealing
with perl/Tk in progress, an ongoing magazine column and a growing FAQ
(the document you are presently reading).
The additional material you may want to look at can be split into Perl/Tk,
Perl, Tcl/Tk, and X documentation categories:
Perl/Tk Specific Documentation
++++++++++++++++++++++++++++++
The man pages
-------------
With up to date Tk build kits the various perl/Tk pod documents are
converted to your systems' helpfile format and installed as part of the
perl/Tk "make install" process. If you have a recent verion of perl/Tk
try something like man 3 Tk::Tk if this does not work check with you
system administrator for the proper MANPATH.
In your Tk build directory there should be a doc/ sub-directory in which
there are a number of .htm files (after you make install). These files
were originally Tcl/Tk man pages (from the man* sub-directories), but
the *.htm files have been converted to Perl syntax and rendered in HTML
format. You can use the Perl/Tk web browser to view them locally with a
command like:
tkweb index.html
or you may view them on the web itself by installing them in a web-server
directory tree, or by pointing a browser at:
http://w4.lns.cornell.edu/~pvhp/ptk/doc/
The newsgroup
-------------
The newsgroup name is comp.lang.perl.tk and this FAQ will be
periodically posted to that group (as well as a few other newsgroups). The
newsgroup and/or the ptk mailing list are the appropriate places to post
questions - yes even simple ones! (Although answers may sometimes be
long in coming ... :-(
The nTk/pTk mailing list
------------------------
The mailing list is an excellent supplement and complement to the
newsgroup comp.lang.perl.tk. All messages mailed to the list are forwarded
to the newsgroup. (But not all messages posted to the newsgroup are
forwarded to the list.) Some Perl/Tk experts only have access to e-mail.
The nTk/pTk Mailing List Archive is a very useful source of information
too, and is accesible at either
http://pubweb.bnl.gov/~ptk/
or via ftp at
ftp://ftp.ccd.bnl.gov/pub/ptk/archives/
(both in the USA). You may search the contents of another ptk mailing
list hypertext archive thanks to a cgi-bin script written by Achim Bohnet
in Germany at:
http://www.rosat.mpe-garching.mpg.de/mailing-lists/ptk/
You must subscribe to the mailing list to receive e-mail from the list. To
subscribe to the mailing list you can send mail to
[email protected] (i.e. <
[email protected]>)
with the following command in the body of your e-mail message:
subscribe ptk joe.user@somewhere (Joe D. User)
To send a message to all recipients of the mailing list send e-mail to
<
[email protected]>.
To remove yourself from the mailing list send e-mail to
[email protected] (i.e. <
[email protected]>)
with the following command in the body of your e-mail message:
unsubscribe ptk joe.user@somewhere (Joe D. User)
Where instead of "joe.user@somewhere" you might very well like to
substitute another string of characters.
(Please note: one does not send unsubscribe messages to the ptk list. One
does send "unsubscribe ptk" messages to a special e-mail list
administration program. In the case of the ptk list you send to
[email protected]. You must of course do this from the
account and computer from which you initially subscribed. In particular if
you are viewing the hypertext version of this FAQ you may not be able to
unsubscribe from
[email protected] by following the mailto:
hyperlinks - if your web-browser account/computer is different from your
subscribe to e-mail-lists account/computer (the details of this might
depend on which browser you use though). Thank you for your cooperation
on this.)
The demo programs
-----------------
Examine (and try running) the code in your Tk#/ build directory tree. You
might also be interested in test-running the code that gets installed:
o or perl5/site_perl/Tk/demos/ or
perl5/site_perl/Tk/demos/widget_lib/ directories
(recent Tk's).
o Tk#/ or perl5/Tk/demos/ or
perl5/Tk/demos/widget_lib/ directories (older versions e.g.
Tk-b8).
In order to determine where on your system the perl5/ directory is
located type the following one-line perl command (at your shell prompt -
this is not a line from a perl script):
perl -e 'print join("\n",@INC,"");'
If that command does not turn up a perl5/ directory then make sure that
you are running perl 5 with the following: perl -v (this too can simply be
entered at the shell prompt).
More on the pod & man documentation
-----------------------------------
[As previously mentioned a great number of Tcl/Tk man pages are
converted from *roff format to html format and are to be found within
your Tk build directory tree in the doc/ sub-directory. These documents
form an authoritative and extensive reference set for Perl/Tk.]
The raw pod files that come with the Tk kit are examples of the perl "plain
old documentation" format and are just about human readable as they are (
e.g. you may more, cat, or less them; or send them to a printer). Many
(not all) of the perl/Tk pod documents get are converted to *roff format
and are installed in you perl man page area as part of the perl/Tk build
process.
If you have a recent version of perl/Tk try something like man 3 Tk::Tk.
If this does not work check your manual page path with
perl -MConfig -e 'print $Config{man1dir},"\n",$Config{man3dir},"\n"'
or
perl -e 'use Config; print $Config{man1dir},"\n",$Config{man3dir},"\n"'
And if you still cannot find the manual pages check with your system
administrator for the proper MANPATH and/or Tk installation version.
"Raw" .pod (such as UserGuide.pod) can be viewed with the tkpod
hypertext pod viewer. Raw .pod may also be run through any one or more
of a large numbers of re-formatting perl filters. Such programs include
pod2man, pod2text, pod2html, pod2latex, etc. (these get installed when
you install perl). Other translators pod2texinfo, pod2fm, pod2pdf,
etc., also exist. Check a CPAN site for these scripts if you do not already
have them.
A command line like the following (but subject to local variations) should
work for you:
tkpod site_perl/Tk/UserGuide.pod
or if you like Unix manual page style:
pod2man perl5/Tk/UserGuide.pod | nroff -man | more
(note that I am showing examples with almost full file path names - the
alternative would be to cd into the appropriate directory then type:
pod2man UserGuide.pod | nroff -man | more
There should even be a perl script to run that above command for you. It is
executed as:
perldoc UserGuide
Note that if there is pod like documentation in a perl module you may also
execute tkpod (or perldoc) on it as in:
tkpod ColorEditor.pm
(please note that unfortunately, not all .pm mod files have pod embedded.)
If you have misplaced your tkpod program but still want that GUI look and
feel (like xman) make the appropriate changes to the following script:
#!/usr/bin/perl
use Tk;
use Tk::Pod;
my $m = new MainWindow;
$m -> Pod(-file => 'ColorEditor.pm');
# or use command line path/filename:
# $m -> Pod(-file => $ARGV[0]);
MainLoop;
A miscellany of internet perl/Tk resources includes:
----------------------------------------------------
World Wide Web - perl/Tk man pages
http://pubweb.bnl.gov/~ptk/doc/index.html
http://w4.lns.cornell.edu/~pvhp/ptk/doc/
http://w4.lns.cornell.edu/~pvhp/ptk/pod/
Newsgroups
comp.lang.perl.tk
comp.lang.perl.misc
comp.lang.perl.anounce
comp.lang.tcl
comp.lang.tcl.announce
comp.answers
news.answers
Perl/Tk FAQ-Archives (ftp sites) [Note: FAQ may be many separate files]
(see also CPAN sites)
ftp://rtfm.mit.edu/pub/usenet/comp.lang.perl.tk
ftp://rtfm.mit.edu/pub/usenet-by-hierarchy/comp/lang/perl/tk
ftp://ftp.uu.net/usenet/news.answers/perl-faq/ptk-faq
ftp://ftp.ccd.bnl.gov/pub/ptk/ 130.199.54.188
ftp://ftp.ccd.bnl.gov/pub/ptk/ptkFAQ.txt 130.199.54.188
ftp://ftp.wpi.edu/perl5/pTk-FAQ 130.215.24.209
ftp://perl.com/pub/perl/doc/ptkFAQ.gz 199.45.129.30
ftp://perl.com/pub/perl/doc/ptkFAQ.ps.gz 199.45.129.30
WWW-FAQ for perl/Tk
http://w4.lns.cornell.edu/~pvhp/ptk/ptkTOC.html
http://w4.lns.cornell.edu/~pvhp/ptk/ptkFAQ.html
World Wide Web - perl/Tk info sites
http://pubweb.bnl.gov/~ptk/
http://fxfx.com/kgr/compound/ (Perl Tk Compound Widget Page)
http://w4.lns.cornell.edu/~pvhp/ptk/ptkIMG.html (FAQ image supplement)
http://w4.lns.cornell.edu/~pvhp/ptk/etc/
http://w4.lns.cornell.edu/~pvhp/ptk/misc/
http://w4.lns.cornell.edu/~pvhp/ptk/PNMTYAK/
http://www.mirai.com/wks/
The Mailing list
[email protected]
[email protected]
Perl Specific Documentation
+++++++++++++++++++++++++++
There are a growing number Perl books available. A more complete
Perl-bibliographic discussion than that given here is available in the Perl
FAQ at:
http://www.perl.com/perl/faq/Q2.2.html
or at:
http://www.perl.com/perl/info/books.html
For Perl 5 there is (as of September 1996) a "New Camel" by Larry Wall,
Tom Christiansen, and Randal L. Schwartz, with Stephen Potter.
Programming Perl 2nd Edition
Larry Wall, Tom Christiansen, & Randal L. Schwartz with Stephen
Potter
(c) 1996 O'Reilly & Associates Inc.
ISBN 1-56592-149-6; Order number: 1496 (English)
The two early Perl books by Schwartz and Wall are very helpful (even if
they do pertain to perl 4 and not 5. Beware that perl/Tk makes extensive
use of perl 5 object-oriented features.):
Learning Perl (The Llama)
Randal L. Schwartz
Copyright (c) 1993 O'Reilly & Associates Inc.
ISBN 1-56592-042-2 (English)
ISBN 2-84177-005-2 (French)
ISBN 3-930673-08-8 (German)
ISBN 4-89502-678-1 (Japanese)
Programming Perl (The Camel)
Larry Wall and Randal L. Schwartz
Copyright (c) 1991 O'Reilly & Associates Inc.
ISBN 0-937175-64-1 (English)
ISBN 3-446-17257-2 (German) (Programmieren in Perl, translator:
Hanser Verlag)
ISBN 4-89052-384-7 (Japanese)
There is also some Perl5 (book material) information at:
http://www.metronet.com/1h/perlinfo/perl5/
Jon Orwant (the organizer of the comp.lang.perl.tk newgroup) will have a
book on Perl 5 out in early 1996. (Please note that it is mostly about Perl 5,
there is a some discussion of four simple Perl/Tk programs, but it is not a
book wholly devoted to Perl/Tk.) The relevant info:
Perl 5 Interactive
Jon Orwant
The Waite Group Press
ISBN: 1-57169-064-6
The Perl 5 Quick Reference Guide (may require LaTeX for installation)
can be obtained from any CPAN ftp site. Detailed location information is
also available at the author's website:
http://www.xs4all.nl/~jvromans/perlref.html
The quick reference guide has also been turned into a small Nutshell
handbook:
Perl 5 Desktop Reference
Johan Vromans
Copyright (c) February 1996 O'Reilly & Associates Inc.
ISBN: 1-56592-187-9; Order number: 1879
Additional book information may be found at Tom Christiansen's perl &
cgi books page. The multi-part perl 5 manual pages are available
(assuming they have been installed in your MANPATH, type man perl, man
perlmod etc.).
The perl man pages are also available on the web at a number of locations
including:
World Wide Web - perl 5.001m man pages
(the 5.002 pages [listed below] are more useful though)
Australia
http://www.cs.mu.oz.au/~slf/perl5/perl.html
http://bwyan.anu.edu.au/perl.html
Austria
http://www.cosy.sbg.ac.at/comp/lang/perl/perl5man/perl.html
Brazil
http://www.lsi.usp.br/perl5/
Canada
http://csclub.uwaterloo.ca/perldoc/perl.html
http://stoner.eps.mcgill.ca/perl/perl.html
Germany
http://www.t-informatik.ba-stuttgart.de/Perl5/perl.html
http://www.dfv.rwth-aachen.de/doc/perl/perl.html
Norway
http://www.pvv.unit.no/sw/perl5/index.html
Slovak Republic
http://www.savba.sk/autori/perl/perl.html
Slovenia
http://www.ijs.si/perl/
Taiwan
http://www.ccu.edu.tw/perl5/index.html
UK
http://www.cs.man.ac.uk/~richardd/perl5/perl.html
http://ppewww.ph.gla.ac.uk/perl/perl.html
USA
http://rhine.ece.utexas.edu/~kschu/perlman.html
http://duggy.extern.ucsd.edu/perl/perl.html
http://tbone.biol.scarolina.edu/~dean/perl/perl.html
http://www.mit.edu:8001/perl/perl.html
http://icg.stwing.upenn.edu/perl5/perl.html
http://w4.lns.cornell.edu/public/compdoc/info/perl/perl.html
World Wide Web - perl 5.002 man pages
(also very useful for previous versions of perl 5)
Canada
http://dymaxion.ns.ca/www/dv/perl_manual/index.html
http://wepil.uwaterloo.ca/~mathers/perl/perl.html
Czech Republic
http://infog.eunet.cz/~muaddib/perl5/index.html
Finland
http://www.hut.fi/~jhi/perl5/index.html
Germany
http://nat-www.uia.ac.be/perl/perl.html
Netherlands
http://www.cs.ruu.nl/pub/mirrors/CPAN/doc/manual/html/frame_index_long.html
USA
http://pubweb.bnl.gov/~ptk/pod/perl.html
http://www.metronet.com/0/perlinfo/perl5/manual/perl.html
http://www.lafayette.edu/doughera/doughera/perl/manual/perl.html
http://www.va.pubnix.com/staff/stripes/perlinfo/
http://www.perl.com/perl/manual/
http://128.84.219.39/public/perl/manual/
http://www.ilap.com/perl/
http://saturn.lbcc.cc.or.us/www_root/docs/perl5/PERL.HTML
In addition to the CPAN ftp source sites, a miscellany of internet perl
resources includes:
Newsgroups
comp.lang.perl.misc
comp.lang.perl.announce
comp.lang.perl.modules
comp.infosystems.www.authoring.cgi
comp.answers
news.answers
Perl FAQ-Archives (ftp sites) [Note: FAQ may be many separate files]
(see also the CPAN sites)
North America
ftp://rtfm.mit.edu/pub/usenet/news.answers/perl-faq/
ftp://ftp.uu.net/usenet/news.answers/perl-faq 192.48.96.9
ftp://ftp.khoros.unm.edu/pub/perl/faq.gz 198.59.155.28
Europe
ftp://ftp.cs.ruu.nl/pub/NEWS.ANSWERS/perl-faq/ 131.211.80.17
ftp://src.doc.ic.ac.uk/packages/perl/FAQ 146.169.2.10
Gopher Perl FAQ
gopher://gopher.metronet.com/11/perlinfo/faq
WWW-FAQ for Perl
http://www.perl.com/perl/faq/
http://www.smartpages.com/bngfaqs/comp/lang/perl/top.html
http://www.smartpages.com/bngfaqs/comp/lang/perl/misc/top.html
http://www.smartpages.com/bngfaqs/comp/lang/perl/announce/top.html
http://www.cis.ohio-state.edu/hypertext/faq/usenet/perl-faq/top.html
Perl for Win32 FAQ (discusses Win95)
http://www.perl.hip.com/PerlFaq.htm
Perl info sites
Gopher (gopher:70) perl info sites
USA
gopher://gopher.metronet.com/11h/perlinfo
World Wide Web (http:80) perl info sites
USA
http://www.yahoo.com/Computers_and_Internet/Languages/Perl/index.html
http://www.perl.com/
http://www.khoros.unm.edu/staff/neilb/perl/home.html
http://www.khoros.unm.edu:80/staff/neilb/perl/metaFAQ/
http://www.metronet.com/perlinfo/
http://www.metronet.com/perlinfo/perl5.html (Perl 5)
http://www.eecs.nwu.edu/perl/perl.html
http://128.84.219.39/public/perl/
http://www.virtualschool.edu/mon/Perl.html
http://www.hermetica.com/technologia/unexec/
http://www.oac.uci.edu/indiv/ehood/perlWWW/
http://web.sau.edu/~mkruse/www/scripts/
http://orwant.www.media.mit.edu/the_perl_journal/
http://www.perl.com/Architext/AT-allperl.html
http://www.mispress.com/introcgi/
http://www.walrus.com/~smithj/webcan/
http://web.syr.edu/~chsiao05/cps600_project.html
http://www.iftech.com/classes/webdev/webdev_perl.htm
http://www.cc.iastate.edu/perlmenu/
http://www.ora.com/www/item/cgi_prog.html
UK
http://pubweb.nexor.co.uk/public/perl/perl.html
http://www.bio.cam.ac.uk/web/form.html
Web references to Perl mailing lists
http://www.perl.com/perl/info/mailing-lists.html
http://www.nicoh.com/cgi-bin/lwgate/PERL5-PORTERS/
http://www.hut.fi/~jhi/perl5-porters.html
http://www.rosat.mpe-garching.mpg.de/mailing-lists/
Tcl/Tk Specific Documentation
+++++++++++++++++++++++++++++
The two Tcl/Tk books by Ousterhout and Welch are very good starting
points (you must however, translate the tcl-isms to perl in the sample
scripts):
Tcl and the Tk Toolkit
John K. Ousterhout
Copyright (c) 1994 Addison-Wesley Publishing Company
ISBN 0-201-63337-X (alk. paper)
LOC QA76.73.T44097 1994; 005.13'3--dc20
Practical Programming in Tcl and Tk
Brent Welch
Copyright (c) 1995 Prentice Hall
ISBN 0-13-182007-9
Within the tclsh or wish shells your manpath includes the tcl/tk man
pages (which may not be in your login MANPATH). Thus from the %
prompt within either shell type commands like:
% man -k Tk
The Tcl/Tk Reference Guide is also a source of useful information.
Although it's Tcl specific most perl/Tk commands can be, more or less,
easily derived from it. [As of Tk-b9.01 the names of some functions and
some configuration options have changed slightly from their Tcl/Tk
counterparts. With Tk-b9.01 (and higher) a great many functions start
with an upper case letter and continue with all lower case letters (e.g. there
is a perl/Tk Entry widget but no entry widget), and many configuration
options are all lower case (e.g. there is a perl/Tk highlightthickness
option but no highlightThickness option).] You may fetch the Tcl/Tk
Reference Guide (may require LaTeX for installation) from:
ftp://ftp.slac.stanford.edu/software/TkMail/tkref-4.0.1.tar.gz 134.79.18.30
ftp://ftp.aud.alcatel.com/tcl/docs/tkref-4.0.1.tar.gz 198.64.191.10
There are a number of other Tcl/Tk resources on the internet including:
Newsgroups
comp.lang.tcl
comp.lang.tcl.announce
comp.infosystems.www.authoring.cgi
comp.answers
news.answers
FAQ-Archive (ftp) [Note: Tcl FAQ may be many files, Tk FAQ is one file]
ftp://ftp.aud.alcatel.com/tcl/docs/ 198.64.191.10
ftp://rtfm.mit.edu/pub/usenet/news.answers/tcl-faq
ftp://rtfm.mit.edu/pub/usenet/news.answers/tcl-faq/tk
WWW-FAQ for Tcl/Tk
http://www.teraform.com/%7Elvirden/tcl-faq/
http://www.smartpages.com/faqs/tcl-faq/top.html
http://www.smartpages.com/bngfaqs/comp/lang/tcl/top.html
http://www.cis.ohio-state.edu/hypertext/faq/usenet/tcl-faq/top.html
http://www.cis.ohio-state.edu/hypertext/faq/bngusenet/comp/lang/tcl/top.html
http://www.sco.com/Technology/tcl/Tcl.html
World Wide Web - Tcl/Tk info sites
Canada
http://web.cs.ualberta.ca/~wade/Auto/Tcl.html
UK
http://http2.brunel.ac.uk:8080/~csstddm/TCL2/TCL2.html
http://www.cis.rl.ac.uk/proj/TclTk/
USA
http://www.yahoo.com/Computers_and_Internet/Languages/Tcl_Tk/index.html
http://www.sunlabs.com/research/tcl/docs.html
http://www.sunlabs.com/research/tcl/4.0.html
http://www.sco.com/Technology/tcl/Tcl.html
http://www.neosoft.com/tcl/
http://www.elf.org/tcltk-man-html/contents.html
Tcl/Tk - miscellaneous extensions
ftp://ftp.cme.nist.gov/pub/expect/
http://www.cs.hut.fi/~kjk/porttk.html
http://www.cis.upenn.edu/~ioi/tix/tix.html
http://www.ece.cmu.edu/afs/ece/usr/svoboda/www/th/homepage.html
http://www.tcltk.com/ [incr Tcl]
http://www.neosoft.com/tcl/TclX.html
http://www.eolas.com/eolas/webrouse/tcl.htm [WebWish]
http://www.se.cuhk.hk/~hkng2/big5tk/big5tk.html
http://www.cs.uoregon.edu/~jhobbs/work/ [BLT etc.]
X Documentation
+++++++++++++++
Tk certainly makes the generation of GUI code a lot easier than hard
coding things in traditional compiled languages such as C, C++, or Lisp.
Nevertheless there is a very large body of X documentation out there that
will assist all widget and GUI builders with issues of design,
implementation, etc. Hence it is good practice to be informed of the
general design goals of X itself as well as the other toolkits that have been
built on top of X.
There are a number of X resources on the internet including:
Newsgroups
comp.windows.x
comp.windows.x.announce
comp.windows.x.apps
X FAQs:
ftp://ftp.x.org/contrib/faqs/
X FAQ on the World Wide Web:
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-1
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-2
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-3
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-4
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-5
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-6
http://www.x.org/ftp/contrib/faqs/x-faq-multipart/x-faq-7
X Window System book info on the Web:
http://www.x.org/ftp/contrib/docs/Xbibliography.OReilly
http://www.ora.com/catalog/v1/
http://www.ora.com/catalog/v2/
http://www.ora.com/catalog/v3/
http://www.ora.com/catalog/v4/
http://www.ora.com/catalog/v5/
http://www.ora.com/catalog/v6a/
http://www.ora.com/catalog/v6b/
http://www.ora.com/catalog/v6c/
http://www.ora.com/catalog/r6/noframes.html
http://www.ora.com/oracom/prog/flanart.html
World Wide Web - X Window System info sites
http://www.x.org/
http://www.x.org/consortium/GettingX.html
http://www.x.org/consortium/x_info.html
http://www.x.org/consortium/R6.1doc/man/X11/
http://www.wolfram.com/~cwikla/widget/
http://www.zeta.org.au/~rosko/pigui.htm
http://www.rahul.net/kenton/xsites.html
http://www.unx.com/DD/txaCurrent.shtml
______________________________________________________________________
7. How do I write scripts in perl/Tk?
Start your script as you would any perl script (e.g. #!/usr/bin/perl,
#!/usr/local/bin/perl, #!/opt/bin/perl, [built static? then
#!/usr/bin/tkperl], whatever, see the perlrun(1) man page for
more information).
Throwing the -w warning switch is recommended.
The use of the statement use strict; is recommended.
Use of the statement use Tk; is required.
A simple "Hello World!" widget script could be written as follows:
#!/usr/local/bin/perl -w
use strict;
use Tk;
my $main = new MainWindow;
$main->Label(-text => 'Hello World!'
)->pack;
$main->Button(-text => 'Quit',
-command => sub{exit}
)->pack;
MainLoop;
The MainLoop; statement is the main widget event handler loop and is
usually found in perl/Tk scripts (usually near the end of the main
procedure after the widgets have been declared and packed). MainLoop;
is actually a function call and you may see it written as MainLoop();,
&Tk::MainLoop;, &Tk::MainLoop();, etc.
Note the use of the -> infix dereference operator. Most things in calls to
perl/Tk routines are passed by reference.
Note also the use of the => operator which is simply a synonym for the
comma operator (well it is a bit more than that :-). In other words, the
arguments that get passed to Label and Button in the above example are
good old perl associative arrays (perl 5 people prefer to call them "hashes"
however). Indeed, we might have written the above as:
#!/usr/local/bin/perl -w
use strict;
use Tk;
my $main = new MainWindow;
$main->Label(-text , 'Hello World!'
)->pack;
$main->Button(-text , 'Quit',
-command , sub{exit}
)->pack;
MainLoop;
Or even as:
#!/usr/local/bin/perl -w
use strict;
use Tk;
my $main = new MainWindow;
my %hello = ('-text','Hello World!');
my %quit_com = ('-text' => 'Quit', '-command' => sub{exit});
$main->Label(%hello)->pack;
$main->Button(%quit_com)->pack;
MainLoop;
Note however, that the use of the => in the first method of writing this
script makes it look more "Tcl-ish" :-).
Lastly, we note the extensive use of the my function in most perl/Tk
programs. my is roughly equivalent to local in Perl 4 - but is purported to
be "faster and safer" as well as much more strictly local in scope. See
perlfunc(1) manpage for more information on my.
Other examples of code may be found in the perl5/Tk/demos/ directory
and in perl5/Tk/demos/widget_lib/.
(A variant on this scipt called hello is available in the file
perl5/Tk/demos/hello in your own pTk distribution. Also, Source
code for this and other examples from UserGuide.pod may be found at
http://w4.lns.cornell.edu/~pvhp/ptk/pod/. To load code from the web save
as a local filename, edit the first line to point to your perl interpreter, then:
chmod u+x filename, then execute: filename.)
______________________________________________________________________
8. What widget types are available under perl/Tk?
The following Tk widget primitives are available under perl/Tk:
o Button
o Canvas
o Checkbutton
o Entry
o Frame
o Label
o Listbox
o Menu
o Menubutton
o Message
o Radiobutton
o Scale
o Scrollbar
o Text
o Toplevel
The following are Tix widget primitives available under perl/Tk:
o HList
o InputOnly
There are (a lot of) other [compound|composite|constructs] available too.
You can also synthesize new widgets out of these primitives using perl5's
object-oriented multiple inheritance features. You can even build entirely
new widget primitives from raw C (XS) code then use and re-use that.
(Perl 5 is extremely configurable.)
A good introduction to the primitives and how they may be used in
conjunction with each other may be found in the widget demo script.
Note that all the widget demos have a "Show Code" button. To help figure
out what is happening in the script you may, when the window appears,
edit the text and instrument the code with print statements and then
simply press "Rerun Demo". Another place to see examples of the
primitives (on the web) is at the image supplement to this FAQ at the
following URL:
http://w4.lns.cornell.edu/~pvhp/ptk/ptkIMG.html
