The Belgian HOWTO
 by Dag Wie�rs, [email protected]
 v1.0.11, 11 September 1999

 This document describes how to tweak Linux for Belgian users and lists
 Linux   user groups, businesses and other resources in Belgium.

 ______________________________________________________________________

 Table of Contents

 1. Introduction

    1.1 Why this document?
    1.2 New versions of this document
    1.3 Contributions
    1.4 Feedback

 2. Configuration

    2.1 Keyboard setup
       2.1.1 Console
       2.1.2 XFree86
    2.2 Display and applications
       2.2.1 Using the ISO-8859-1 font in console
       2.2.2 Support for the Euro symbol
    2.3 Time zone
    2.4 Locale support
       2.4.1 Dutch
       2.4.2 French
       2.4.3 German
       2.4.4 Walloon
    2.5 HOWTO translations
       2.5.1 Dutch
       2.5.2 French
       2.5.3 German
    2.6 Native language support and codepages

 3. Setting up Internet (Belgian ISP information)

    3.1 Dialing in with your modem (PPP)
       3.1.1 Configuring the modem
       3.1.2 Installing pppd
       3.1.3 pap-secrets / chap-secrets
       3.1.4 Network
       3.1.5 Dial + Hangup
       3.1.6 ISP-dependant information
    3.2 Dialing in with your ISDN-modem
       3.2.1 Updating the kernel
       3.2.2 ISDN4Linux toolkit
       3.2.3 Configuring the interface
       3.2.4 pap-secrets / chap-secrets
       3.2.5 Network
       3.2.6 Dial + Hangup
    3.3 Cablemodem (DHCP)
    3.4 ADSL

 4. Belgian Linux user groups

    4.1 ALLIN Linux User Group
    4.2 Antwerp Linux User Group (ALUG)
    4.3 Brussels Linux User Group (BLUG)
    4.4 HCC Limburgse Linux Gebruikers Groep (HLLGG)
    4.5 HCC Linux Gebruikers Groep Antwerpen
    4.6 HCC Linux Gebruikers Groep Leuven
    4.7 Independent Group of Unix-Alikes and Network Activists (IGUANA)
    4.8 Infogroep (IGWE)
    4.9 Leuvense Linux Users (L2U)
    4.10 Limburgse Linux User Group (LILUG)
    4.11 Linux Belgian Team
    4.12 Linux Gebruikers Oost-Vlaanderen (LGOVL)
    4.13 Linux User Group De Bruxelles (BxLUG)
    4.14 Linux User Group De Namur
    4.15 Linux User Group Mons
    4.16 Linux User Movement Underground Mad Belgian Aliens (LUMUMBA)
    4.17 linuxbe.org
    4.18 Local Linux Support Group Gent (LLSGG)
    4.19 Open Technology Assembly Linux Special Interest Group
    4.20 Student Information Networking (SIN)
    4.21 TINA
    4.22 Unix Lovers Yield Student Services & Internet Support (ULYSSIS)
    4.23 Zeus WPI - Werkgroep Informatica RUG

 5. Belgian Linux businesses

    5.1 aDOC Services
    5.2 Better Access N.V.
    5.3 D. Connect
    5.4 Double Barrel Consultancy and Productions
    5.5 grmbl productions
    5.6 LIFE
    5.7 Phidani Software SPRL
    5.8 Spier BVBA
    5.9 VirgoPlus sprl

 6. Belgian Linux resources

    6.1 Websites
       6.1.1 Linux in Belgium
       6.1.2 Dutch Linux-sites
       6.1.3 French Linux-sites
       6.1.4 Mirrors in Belgium
    6.2 HOWTO
       6.2.1 Web
       6.2.2 FTP
    6.3 FTP
       6.3.1 Kernel-sources
       6.3.2 Distributions
       6.3.3 Software
    6.4 Usenet
    6.5 Mailinglists
       6.5.1 Linux user groups
    6.6 IRC

 ______________________________________________________________________

 1.  Introduction

 1.1.  Why this document?

 Since there was no information anywhere on the net for Belgian linux
 users, I started to collect stuff that I thought could be important.
 This HOWTO aims to be the definitive list of all Belgian-related Linux
 information. If you think not, you have no excuse to complain and
 certainly not to not contribute. ;)

 1.2.  New versions of this document

 If you need to know more about the Linux Documentation Project or
 about Linux HOWTO's, feel free to contact the supervisor Tim Bynum
 [email protected].

 Tim Bynum will post the listing to several national and international
 newsgroups on a monthly basis. In addition, the Belgian HOWTO can be
 found on the World Wide Web at  <http://dag.mind.be/howto/> New
 versions of the Belgian HOWTO are always placed at this site first, so
 please be sure to check if the copy you are reading is still up to
 date!

 1.3.  Contributions

 A few people mailed me their suggestions and improvements, thanks go
 to:

 �  Wim Vandeputte [email protected]

 �  Pablo Saratxaga [email protected]

 �  Christophe Lambin [email protected]

 �  Geert Uytterhoeven [email protected]

 Many thanks go to Ivo Clarysse [email protected] who started something
 similar earlier () and his project helped me a lot to get this
 document online.

 1.4.  Feedback

 If some information seems to be wrong, deceptive or missing, I'd
 appreciate if you mailed me the improvements. Since I'm just human
 this document isn't bug-free, but your contribution can and will make
 a difference.

 To add yourself to the Linux user groups or businesses, collect all
 necessary information and mail it to me.

 2.  Configuration

 2.1.  Keyboard setup

 Linux provides 2 ways to set up your keyboard. At the console you can
 use loadkeys and under XFree86 you can use xmodmap.

 2.1.1.  Console

 To use the keytable for a Belgian keyboard you can use

         loadkeys be2-latin1

 or

         loadkeys be-latin1

 The only difference between the two is that be2-latin1 add support for
 twosuperior and threesuperior (keycode 41) and grave (keycode 43).

 Usually loadkeys is started at boottime from the scripts located
 somewhere in /etc/rc.d Different distributions handle it differentely.
 But most distributions have a simple program (like kbdconfig in RedHat
 or yast in SuSE) to change the scripts.

 2.1.2.  XFree86

 To set your keyboard properly under XFree86 you've got more choices.
 By running Xconfigurator (or a similar program) a config-file for
 XFree86 is created (with some standard content). This file is called
 XF86Config and is usually located in /etc or /etc/X11

 Make sure (and change otherwise) that something similar to this is
 given under the Keyboard Section.

         Section "Keyboard"
                 Protocol        "Standard"
                 XkbRules        "xfree86"
                 XkbModel        "pc101"
                 XkbLayout       "be"
         EndSection

 If you own a 'microsoft' keyboard (or the less-known penguin keyboards
 ;p) you can enable those extra 3 keys by changing the "pc101" into
 "pc104". (I use the extra keys as meta-keys in my windowmanager so
 some shortcuts doesn't conflict with the internal ones of my wm).

 To get the AltGr key to work under XFree86 simply add in the Keyboard
 Section:

                 RightAlt        ModeShift

 To get some key-combinations working under X11, you might want to
 change in file /usr/X11R6/lib/X11/xkb/symbols/be:

         key <AD11> {    [ dead_circumflex,       diaeresis      ],
                         [     bracketleft                       ]       };
         key <AC11> {    [          ugrave,         percent      ],
                         [      quoteright                       ]       };
         key <BKSL> {    [              mu,        sterling      ],
                         [       quoteleft                       ]       };
         key <AB10> {    [           equal,            plus      ],
                         [      asciitilde                       ]       };

 by

         key <AD11> {    [ dead_circumflex,  dead_diaeresis      ],
                         [     bracketleft                       ]       };
         key <AC11> {    [          ugrave,         percent      ],
                         [      dead_acute                       ]       };
         key <BKSL> {    [              mu,        sterling      ],
                         [      dead_grave                       ]       };
         key <AB10> {    [           equal,            plus      ],
                         [      dead_tilde                       ]       };

 Some people prefer to use a 'compose'-key to enter their special
 characters, like:

         <compose>'e => �
         <compose>/o => �
         <compose>c, => �
         <compose>co => �
         <compose>ss => �

 Solution:

         xmodmap -e "keycode xx = Multi_key"

 or

         xmodmap -e "keysym yy = Multi_key"

 and 'xx' is the keycode and 'yy' the kesym of the key you choose to be
 the 'compose'-key.  (use xev to get these values)

 Alternatively you can add

         keycode xx = Multi_key

 to your  /.xmodmaprc. This way it happens automagically.

 2.2.  Display and applications

 Some applications have to be compiled as 8-bit clean to work well with
 the European characterset. Others like to be told in advance.

 2.2.1.  Using the ISO-8859-1 font in console

 You can load the ISO-8859-1 font by typing the following in console:

         setfont lat1u-16.psf
         mapscrn trivial
         echo -ne '\033(K'

 To be able to use �, �, � or � in console, you might want to add these
 to your  /.inputrc:

         set meta-flag on
         set convert-meta off
         set output-meta on

 (this must be done for every user, if you want this to be default for
 all users you can either add this file to /etc/skel/ or you could add
 these lines to /etc/inputrc and add the following line to /etc/bashrc,

         export INPUTRC=/etc/inputrc

 )

 Note: this is only useful to programs that use readline (like bash)
 Also set the following environment variables:

         LC_CTYPE=iso-8859-1
         SYSFONT=lat1u-16.psf
         SYSTERM=linux

 2.2.2.  Support for the Euro symbol

 Since Europe had to invent a new character, the Euro, there's a new
 standard. It's called ISO-8859-15 (aka Latin-9 or Latin-0). To add
 support you need both a new font and new keymaps. They're included
 with the EURO-package and can be found at:
 <ftp://ftp.freshmeat.net/pub/euro-patch/>.  Soon this will be part of
 every major distribution.

 The changes in the keymap-file consist of the following lines:

         keycode  18 = +e        +E      currency
         keycode  46 = +c        +C      cent

 And the following environment-variable should be set:

         SYSFONT=lat0-16.psf

 to make sure you're using the right font.

 2.3.  Time zone

 Since Belgium is located in the Central European Time zone (aka MET)
 which (in the winter) is equivalent to the Greenwhich Mean Time plus 1
 (GMT+1), you can simply link /usr/lib/zoneinfo/localtime/MET to
 /etc/localtime symbolicly like:

         ln -sf /usr/lib/zoneinfo/MET /etc/localtime

 or

         ln -sf /usr/lib/zoneinfo/Europe/Brussels /etc/localtime

 This automagically sets Daylight Savings (which is GMT+2 in the sum�
 mer).

 Note: that different distributions have different paths, zoneinfo can
 be located in /usr/share or such...

 Note2: RedHat uses a tool called timeconfig, SuSE uses yast

 To change the CMOS clock and then synchronize the system time with the
 CMOS clock, do something like this:

         hwclock --set --date="Feb 25 03:38"
         clock -u -s

 If your clock is set to local time (which is discouraged but if you
 have other OS's installed a must), you can do:

         hwclock --set --date="Feb 25 04:38"
         clock -s

 [Noticed the 1 hour difference ? ;p]

 2.4.  Locale support

 Not much programs support locale yet, if you want to know more about
 locale or how to write your own programs to support it, check: [put
 the damn url here ;p]

 Be aware that locale makes it harder to resolve problems as less
 people can help you !! You might understand a problem when it's in
 technical English, but what if it's translated in some obscure French
 ?!? Some obviously won't understand both. ;p

 2.4.1.  Dutch

 To enable support for the Dutch locale in Belgium on a system with
 locale support you just have to set the following environment
 variables:

         LANG=nl
         LANGUAGE=nl_BE

 Try nl_BE.ISO_8859-1 if nl_BE does not work.

 2.4.2.  French

 If you want French locale support in Belgium, set the following
 environment variabels:

         LANG=fr
         LANGUAGE=fr_BE

 Try fr_BE.ISO_8859-1 if fr_BE does not work.

 2.4.3.  German

 If you want instead German locale support in Belgium, set the
 following environment variabels:

         LANG=de
         LANGUAGE=de_BE

 Try de_BE.ISO_8859-1 if de_BE does not work.

 2.4.4.  Walloon

 For Walloon locale support you can find files and information at:
 <http://www.ping.be/linux/walon/>. To use it set:

         LANG=wa
         LANGUAGE=wa_BE:fr_BE

 Try wa_BE.ISO_8859-1 if wa_BE does not work.

 2.5.  HOWTO translations

 As Dutch is less wide-spread, it is the least supported. But work is
 being done to resolve this ;) (and maybe *you* can help ?!?) French
 and German translations obviously are already taken care of.

 2.5.1.  Dutch

 A succesfull initiative is making progress, but there's still a lot to
 do.  If you want to help, start translating and send it there. Check:
 <http://nl.linux.org/doc/HOWTO/>.

 2.5.2.  French

 French translations of HOWTO's can be found at:
 <ftp://metalab.unc.edu/pub/Linux/docs/HOWTO/translations/french/>

 2.5.3.  German

 German translations of HOWTO's can be found at:
 <ftp://metalab.unc.edu/pub/Linux/docs/HOWTO/translations/german/>

 2.6.  Native language support and codepages

 These options add support for the Belgian characterset and codepages.
 If you'd like to have these, compile a kernel with these options put
 on. They only apply to some filesystems (FAT-based, ISO9660, ...).

         < > Codepage 850 (Europe)
         < > NLS ISO 8859-1  (Latin 1; Western European Languages)
         < > NLS ISO 8859-15 (Latin 9; Western European Languages with Euro)

 Located in Filesystems > Native Language Support

 If your kernel is a modular kernel that came with your distribution
 (=you never compiled a kernel before), then you might want to type:

         insmod nls_cp850
         insmod nls_iso8859_1
         insmod nls_iso8859_15

 3.  Setting up Internet (Belgian ISP information)

 3.1.  Dialing in with your modem (PPP)

 To configure PPP correctly, you should check the PPP-HOWTO
 <http://www.interweft.com.au/other/ppp-howto/ppp-howto.html>.  I try
 to explain it briefly, but if you have any questions or problems, read
 the HOWTO very carefully.

 3.1.1.  Configuring the modem

 To configure your modem, you can alter the initstring of your modem.
 To learn more about your modem, check Ask Mr. Modem
 <http://www.spy.net/~dustin/modem/>.  Beware, if you have a winmodem
 you will not get it to work. More information about winmodems is at:
 <http://linmodems.org/>

 3.1.2.  Installing pppd

 Now, you need to have the ppp-package installed (check this by typing
 pppd --version), make sure you have a recent one. Then you have to
 make sure you've got these files:

 /usr/local/bin/ppp

         #!/bin/sh
         case $1 in
                 on|start)
                 TELEPHONE='555-1212'    # The telephone number for the connection
                 ACCOUNT='your_login'    # The account name for logon (as in 'George Burns')
                 PASSWORD='your_pass'    # The password for this account (and 'Gracie Allen')
                 INITSTRING='AT'         # Modem initstring
                 IPLOCAL=0.0.0.0         # Local IP address if known. Dynamic = 0.0.0.0
                 IPREMOTE=0.0.0.0        # Remote IP address if desired. Normally 0.0.0.0
                 DEVICE=/dev/ttyS1       # Serial Device com1=ttyS0, com2=ttyS1,...
                 SPEED=57600             # 19200, 38400 or 57600 (don't try something different)
                 export TELEPHONE ACCOUNT PASSWORD INITSTRING
                 exec /usr/sbin/pppd $DEVICE $SPEED $IPLOCAL:$IPREMOTE \
                         user $ACCOUNT connect /etc/ppp/ppp-on-dialer
                 ;;
                 off|stop)
                 if [ -r /var/run/ppp0.pid ]; then
                         kill -INT `cat /var/run/ppp0.pid`
                         if [ ! "$?" = "0" ]; then
                                 rm -f /var/run/ppp0.pid
                                 echo "ERROR: Removed stale pid file"
                                 exit 1
                         fi
                         exit 0
                 fi
                 echo "ERROR: PPP link is not active on ppp0"
                 exit 1
                 ;;
                 info|status)
                 /usr/sbin/pppstats
                 ;;
                 *)
                 echo "Usage: ppp on|off|info|start|stop|status";
                 ;;
         esac

 /etc/ppp/ppp-on-dialer

         #!/bin/sh
         exec /usr/sbin/chat -v                                  \
                 TIMEOUT         3                               \
                 ABORT           '\nBUSY\r'                    \
                 ABORT           '\nNO ANSWER\r'                       \
                 ABORT           '\nNO CARRIER\r'              \
                 ABORT           '\nNO DIALTONE\r'             \
                 ABORT           '\nRINGING\r\n\r\nRINGING\r'      \
                 ''              "\r$INITSTRING\r"         \
                 'OK-+++\c-OK'  'ATH0'                          \
                 TIMEOUT         30                              \
                 OK              "ATDT$TELEPHONE"            \
                 CONNECT         ''                              \
                 ogin:--ogin:    "$ACCOUNT"                  \
                 ord:            "$PASSWORD"

 You can remove the -v once everything looks normal.

 The pppd command uses /etc/ppp/options to list its options, change
 these options to whatever fits. These defaults normally work in most
 cases.

         asyncmap 20a0000
         crtscts
         debug
         default-mru
         defaultroute
         detach
         escape 11,13,ff
         hide-password
         ipcp-accept-local
         ipcp-accept-remote
         lcp-echo-failure 4
         lcp-echo-interval 400
         modem
         mtu 1500
         netmask 255.255.255.0
         noipdefault
         passive

         #idle 300
         #kdebug 0
         #lock
         #-vj

 Once dialing in works like a charm, you can leave debug out.

 3.1.3.  pap-secrets / chap-secrets

 If your ISP requires CHAP or PAP, you need one of these files with
 their proper username and password:

 /etc/ppp/pap-secrets or /etc/ppp/chap-secrets

         #client         server  secret          IP
         your_login      *       your_pass       *

 3.1.4.  Network

 To configure your nameservers, change /etc/resolv.conf. If dialing in
 is succesfull, but you can't get it to connect to URL's: this is
 probably the cause.

         domain domain_of_your_isp
         nameserver your_primary_nameserver
         nameserver your_secondary_nameserver

 3.1.5.  Dial + Hangup

 Then if /usr/local/bin is in your PATH, you can easily dial in with:

         ppp on

 and hangup with:

         ppp off

 and to get some statistics, you do:

         ppp status

 3.1.6.  ISP-dependant information

    Digibel:

       Web:
          <http://www.digibel.org/>

    Eunet:

       Authentication:
          text-based

       Options:
          proxyarp

       Web:
          <http://www.eunet.be/>

    Euronet (Wannadoo):

       Authentication:
          text-based

       Web:
          <http://www.euronet.be/>

    Online:

       Authentication:
          text-based

       Options:
          noccp

       Web:
          <http://www.online.be/>

    Ping:

       Authentication:
          text-based

       Web:
          <http://www.ping.be/>

    Planet Internet:

       Authentication:
          CHAP

       Web:
          <http://www.planetinternet.be/>

    Skynet (Belgacom):

       Authentication:
          PAP

       Options:
          defaultroute

       Web:
          <http://www.skynet.be/>

    UUNet:

       Authentication:
          PAP

       Web:
          <http://www.uunet.be/>

    XS4ALL:

       Authentication:
          PAP

       Web:
          <http://www.xs4all.be/>

 3.2.  Dialing in with your ISDN-modem

 Contributed by Christophe Lambin [email protected]

 This section does not aim to be a definitive guide on ISDN for Linux.
 For a more detailed discussion on the topic, see Paul Slootman's
 ISDN4Linux HOWTO and ISDN4Linux-FAQ.

 3.2.1.  Updating the kernel

 If you're using a 2.2 kernel, it's recommended to get an updated
 version of the ISDN code. You can retrieve the CVS at
 <ftp://ftp.suse.com/pub/isdn4linux/>.  For more information, check:
 <http://www.brisse.dk/site/linux/docs/isdn.htm>

 Warning: if you've recently purchased an Eicon Diva 2.0 PCI (eg, via
 Belgacom), there's a good chance you've actually got a Diva 2.01.In
 this case, you must get a version dated 1 July 1999 or later !

 Once the ISDN is in place, you can start up the driver. Eg:

         modprobe hisax type=11 protocol=2

 Refer to the Readme's for the right parameters and values for your
 card.

 3.2.2.  ISDN4Linux toolkit

 Next, you'll need the ISDN4Linux toolkit.  You can retrieve the latest
 version of the toolkit at:  <ftp://ftp.suse.com/pub/isdn4linux/>

 3.2.3.  Configuring the interface

 With the tools installed and configured, write a script to configure
 the interface, to be used for the ISDN connection. As always in Linux,
 there's no one correct way of doing this. I've put these in a script

 /etc/rc.d/rc.isdn:

         #!/bin/sh
         MSNREMOTE='555-1212'    # Phone number of ISP
         MSNLOCAL='555-1313'     # my number, without 0, with areacode
         ACCOUNT='george'        # The account for logon (as 'George Burns')
         IPLOCAL=10.0.0.2        # my fixed IP (use 10.0.0.2 if no fixed)
         IPREMOTE=0.0.0.0        # IP number of ISP
         INTERFACE=ippp0
         /sbin/modprobe hisax type=11 protocol=2
         /sbin/isdnctrl verbose 3 system on
         /sbin/isdnctrl addif $IF
         /sbin/isdnctrl secure $IF on
         /sbin/isdnctrl addphone $IF out $MSNREMOTE
         /sbin/isdnctrl eaz $IF $MSNLOCAL
         /sbin/isdnctrl huptimeout $IF 300
         /sbin/isdnctrl l2_prot $IF hdlc
         /sbin/isdnctrl l3_prot $IF trans
         /sbin/isdnctrl encap $IF syncppp
 #       /sbin/isdnctrl dialmode $IF auto
         /sbin/ifconfig $IF $IPLOCAL pointopoint $IPREMOTE -arp -broadcast
         /sbin/ipppd /dev/ippp0 user $ACCOUNT $IPLOCAL:$IPREMOTE

 To start this at boot time, make it executable and append the
 following to /etc/rc.d/rc.local:

         if [ -x /etc/rc.d/rc.isdn ]; then
                 . /etc/rc.d/rc.isdn
         fi

 The ipppd command gets its parameters passed through a file,
 /etc/ppp/ioptions:

         -ac
         -bsdcomp
         debug
         defaultroute
         ipcp-accept-local
         ipcp-accept-remote
         mru 1524
         mtu 1500
         noipdefault
         -pc
         useifip
         -vj
         -vjccomp

         #idle 360
         #persistent

 Warning: do NOT specify +pap or +chap in this file. This specifies the
 authentication that ipppd should use for an INCOMING client. If you
 were to use this to connect to your ISP, ipppd would wait for the ISP
 to authenticate itself using the specified protocol.

 Finally, create /etc/ppp/ip-down.local to handle the shutdown of the
 interface:

         #!/bin/sh
         /sbin/ifconfig $1 down
         sleep 1
         /sbin/ifconfig $1 10.0.0.2 pointopoint

 Note: this is to handle some problems with routes on shutdowns.
 Anyone know of a clean(er) solution ?

 3.2.4.  pap-secrets / chap-secrets

 If your ISP uses PAP or CHAP, create a file /etc/ppp/pap-secrets or
 /etc/ppp/chap-secrets. Its format is:

         #client         server  secret          IP
         your_login      *       your_pass       *

 3.2.5.  Network

 Not really related to ISDN, but a lot of people forget this step (too
 eager to try out all the stuff they typed in above ? :-)).

 Anyway, you need to configure the DNS, by creating a file
 /etc/resolv.conf:

         domain your_domain_of_your_isp
         nameserver your_primary_nameserver
         nameserver your_secondary_nameserver

 3.2.6.  Dial + Hangup

 Finally, you can write a little wrapper to start and stop the ISDN
 connection. I've put this as /usr/local/bin/isdn:

         #!/bin/bash
         case $1 in
                 on|start)
                 /sbin/isdnctrl dial ippp0
                 ;;
                 off|stop)
                 /sbin/isdnctrl hangup ippp0
                 ;;
                 info|status)
                 /sbin/isdnctrl list ippp0
                 ;;
                 *)
                 echo "Usage: isdn on|off|info|start|stop|status"
                 ;;
         esac

 Then if /usr/local/bin is in your PATH, you can easily dial in with:

         isdn on

 and hangup with:

         isdn off

 3.3.  Cablemodem (DHCP)

 DHCP was designed to make life easier, and most of the times it does
 ;) More information to set up your DHCP client can be found at:
 <http://metalab.unc.edu/LDP/HOWTO/mini/DHCP.html> which describes
 everything you need to know. (along with the information below)

 Lots of people want to connect a whole network to their cablemodem,
 that's not a problem. You'll need IP-Masquerading (
 <http://metalab.unc.edu/LDP/HOWTO/mini/IP-Masquerade.html>) and make
 sure the interface (that speaks to the cablemodem) has the right MAC-
 address !! Another solution (in case of problems) is to reset your
 cablemodem.

    Chello (TVD):

       Web:
          <http://www.chello.be/>

       More information:
          <http://foobar.starlab.net/~soggie/tvd_linux/>

    Pandora (Telenet):

       Automatic proxy:
          http://pac.pandora.be:8080

       http proxy:
          export http_proxy="http://proxy.pandora.be:8080/"

       Web:
          <http://www.pandora.be/>

 3.4.  ADSL

    Turboline (Belgacom):

       Some things:
          using DANA

       Web:
          <http://www.turboline.be/>

       More information:
          <http://foobar.starlab.net/~soggie/turboline/>

 4.  Belgian Linux user groups

 More information can be found in the User Group HOWTO located at:
 <http://www.ntlug.org/~kclark/> A complete list of Linux User Groups
 is at: <http://www.ssc.com/linux/glue/> and at:
 <http://limestone.uoregon.edu/woven/lugww/>

 4.1.  ALLIN Linux User Group

         Mechelbaan 260
         B-3130 Begijnendijk

    Email:
       [email protected]

    Web:
       <http://come.to/allin/>

    Contact:
       Paul Terweduwe [email protected]

    Meetingplace:

    Last modified:
       13 April 1999.

 4.2.  Antwerp Linux User Group (ALUG)

         Van Luppenstraat 70
         B-2018 Antwerp

    Phone:
       +32 3 218 63 54

    Email:
       [email protected]

    Web:
       <http://sunsite.belnet.be/alug/>

    Contact:
       Patrick Op de Beeck [email protected]

    Meetings:
       Almost every friday at 19h, see homepage first !

    Meetingplace:
       Hof van Rieth, Molenlei 68, Mortsel / Cultureel Centrum Berchem,
       Driekoningenstraat 126

    Last modified:
       8 March 1999.

 4.3.  Brussels Linux User Group (BLUG)

         Brussels Linux User Group (BLUG)

    Email:
       [email protected]

    Web:
       <http://linux.rave.org/>

    Last modified:
       24 February 1999.

 4.4.  HCC Limburgse Linux Gebruikers Groep (HLLGG)

         HCC Limburgse Linux Gebruikers Groep

    Email:
       [email protected]

    Web:
       <http://www.uunet.be/hcc/Limburg/Linuxgg>

    Contact:
       Andy Peeters & Bruno Tony

    Last modified:
       31 May 1999.

 4.5.  HCC Linux Gebruikers Groep Antwerpen

         Armand Verachtert
         Turnhoutsebaan 421
         2140 Borgerhout

    Web:
       <http://users.glo.be/~poe/index.html>

    Last modified:
       25 February 1999.

 4.6.  HCC Linux Gebruikers Groep Leuven

         Diegemstraat 61
         B-1930 Zaventem

    Email:
       [email protected]

    Web:
       <http://www.uunet.be/hcc/>

    Contact:
       Yvo Dries [email protected]

    Last modified:
       2 August 1999.

 4.7.  Independent Group of Unix-Alikes and Network Activists (IGUANA)

         Milcampslaan 101
         B-1040 Schaarbeek

    Phone:
       +32 2 657 77 36

    Fax:
       +32 2 657 77 38

    Email:
       [email protected]

    Web:
       <http://www.iguana.be/>

    Last modified:
       5 March 1999.

 4.8.  Infogroep (IGWE)

         Pleinlaan 2, 5F218 (building F)
         B-1050 Brussels

    Phone:
       +32 2 629 33 56

    Fax:
       +32 2 629 33 89

    Email:
       [email protected]

    Web:
       <http://igwe.vub.ac.be/>

    Last modified:
       6 July 1999.

 4.9.  Leuvense Linux Users (L2U)

         Leuvense Linux Users (L2U)

    Email:
       [email protected]

    Web:
       <http://gallery.uunet.be/darkcompanion/linux/>

    Last modified:
       23 February 1999.

 4.10.  Limburgse Linux User Group (LILUG)

         Limburgse Linux User Group (LILUG)

    Email:
       [email protected]

    Web:
       <http://lilug.linuxatwork.at/>

    Contact:
       Frank Eersels [email protected]

    Last modified:
       6 May 1999.

 4.11.  Linux Belgian Team

         Rue d'Aineffe 4
         B-4317 Borlez Faimes

    Email:
       [email protected]

    Web:
       <http://linux.rtfm.be/>
    Contact:
       Alexandre J.D. Dulaunoy [email protected]

    Last modified:
       25 February 1999.

 4.12.  Linux Gebruikers Oost-Vlaanderen (LGOVL)

         Linux Gebruikers Oost-Vlaanderen

    Email:
       [email protected]

    Web:
       <http://lgovl.freeservers.com/>

    Last modified:
       25 February 1999.

 4.13.  Linux User Group De Bruxelles (BxLUG)

         Linux User Group De Bruxelles (BxLUG)

    Email:
       [email protected]

    Web:
       <http://bxlug.linuxbe.org/>

    Contact:
       Raphael Bauduin [email protected]

    Last modified:
       17 July 1999.

 4.14.  Linux User Group De Namur

         Linux User Group De Namur

    Email:
       [email protected]

    Web:
       <http://namur.linuxbe.org/>

    Last modified:
       17 July 1999.

 4.15.  Linux User Group Mons

         Linux User Group Mons

    Email:
       [email protected]

    Web:
       <http://www.linuxwallonie.org/>

    Last modified:
       26 May 1999.

 4.16.  Linux User Movement Underground Mad Belgian Aliens (LUMUMBA)

         Universiteitslaan 1, Filii Lamberti
         3590 Diepenbeek

    Email:
       [email protected]

    Web:
       <http://lumumba.luc.ac.be/>

    Last modified:
       25 February 1999.

 4.17.  linuxbe.org

         linuxbe.org

    Email:
       [email protected]

    Web:
       <http://linuxbe.org/>

    Contact:
       Cedric Gavage [email protected]

    Last modified:
       5 March 1999.

 4.18.  Local Linux Support Group Gent (LLSGG)

         Wim Vandeputte
         PB 144
         B-9000 Gent 12

    Phone:
       +32 9 240 29 17

    Fax:
       +32 9 240 34 39

    Email:
       [email protected]

    Web:
       <http://llsgg.rug.ac.be/>

    Contact:
       Wim Vandeputte [email protected]

    Last modified:
       4 March 1999.

 4.19.  Open Technology Assembly Linux Special Interest Group

         Kruipstraat 14
         B-1850 Grimbergen

    Phone:
       +32 11 27 58 98

    Fax:
       +32 11 27 03 89

    Email:
       [email protected]

    Web:
       <http://www.ota.be/sigs/linux/>

    Contact:
       Jan Vanhercke [email protected]

    Last modified:
       4 March 1999.

 4.20.  Student Information Networking (SIN)

         Kleinhoefstraat 4
         B-2440 Geel

    Email:
       [email protected]

    Web:
       <http://www.sin.khk.be/>

    Last modified:
       12 June 1999.

 4.21.  TINA

    Email:
       [email protected]

    Web:
       <http://tina.digibel.org/>

    Contact:
       Roman Pauwels [email protected]

    Last modified:
       3 September 1999.

 4.22.  Unix Lovers Yield Student Services & Internet Support (ULYSSIS)

         Blijde Inkomsstraat 21, lokaal 01.17
         B-3000 Leuven

    Phone:
       +32 16 32 48 61

    Email:
       [email protected]

    Web:
       <http://www.ulyssis.student.kuleuven.ac.be/org/ulyssis/>

    Last modified:
       25 February 1999.

 4.23.  Zeus WPI - Werkgroep Informatica RUG

         Krijgslaan 281 S9
         B-9000 Gent

    Phone:
       +32 09 264 47 51

    Email:
       [email protected]

    Web:
       <http://www.zeus.rug.ac.be/>

    Comment:
       Restricted to RUG students

    Last modified:
       22 June 1999.
 5.  Belgian Linux businesses

 The Linux Documentation Project contains a worldwide list of Linux
 consultants, Linux Consultants HOWTO, and can be found at:
 http://consult.cyrius.com/ <http://consult.cyrius.com/>.

 5.1.  aDOC Services

         Avenue du Pesage, 31-33
         B-1050 Brussels

    Phone:
       +32 2 646 00 76

    Email:
       [email protected]

    Web:
       <http://www.adoc-services.com/>

    Last modified:
       25 February 1999.

 5.2.  Better Access N.V.

         Geldenaakse Vest 6
         3000 Leuven

    Phone:
       +32 16 29 80 45

    Fax:
       +32 16 29 80 46

    Email:
       [email protected]

    Web:
       <http://www.ba.be/>

    Type of support:
       After an onsite installation, we mainly support our customers
       with SSH remote administration. Most problems are reported by E-
       mail or by the inhouse-developped webbased supportsystem. This
       doesn't mean that once in a while a supportcall comes in.

    Special expertise:
       Security, systemadministration and setups, security
       (firewalling, tigerteaming, VPN, etc.) Networkdesign, wireless
       networking, Troubleshooting, product development, etc. Please
       visit http://www.ba.be for more info.

    Last modified:
       7 March 1999.

 5.3.  D. Connect

         Av. Van Goidtsnoven 33
         B-1180 Uccle

    Email:
       [email protected]

    Web:
       <http://www.dconnect.be/>

    Last modified:
       25 February 1999.

 5.4.  Double Barrel Consultancy and Productions

         Sportstraat 28
         B-9000 Gent

    Phone:
       +32 9 222 77 64

    Fax:
       +32 9 222 49 76

    Email:
       [email protected]

    Web:
       <http://www.double-barrel.be/>

    Contact:
       Michael C. Vergallen [email protected]

    Type of support:
       phone, email remote network admin, inhouse, onsite.

    Special expertise:
       installation, system admin. internet and intranet connectivity,
       sendmail, firewalls, proxys, nameservers, troubleshooting
       software & hardware.

    Last modified:
       5 March 1999.

 5.5.  grmbl productions

         Korte Vuldersstraat
         B-8000 Brugge

    Phone:
       +32 50 344366
    Email:
       [email protected]

    Web:
       <http://www.grmbl.com/>

    Last modified:
       2 March 1999.

 5.6.  LIFE

         Mgr. Vanwaeyenberglaan 6/10
         B-3000 Leuven

    Phone:
       +32 477 57 50 71

    Email:
       [email protected]

    Web:
       <http://www.life.be/>

    Contact:
       Jasper Nuyens [email protected]

    Type of support:
       LIFE is the first company in Europe to provide 24/7 professional
       support for Linux in Europe. LIFE also provides server and
       desktop installation services, educational services and fixed
       price development. Exclusive on the Linux operating system.

    Special expertise:
       Kernel driver development, database interconnectivity (VPN,
       wireless networking), security auditing (firewall, VPN, ethical
       hacking), e-commerce. See our website for more.

    Last modified:
       20 April 1999.

 5.7.  Phidani Software SPRL

         Rue de l'autonomie 1
         B-1070 Brussels

    Email:
       [email protected]

    Web:
       <http://www.phidani.be/>

    Last modified:
       25 February 1999.

 5.8.  Spier BVBA

         Knaptandstraat 96-98
         B-9100  Sint-Niklaas

    Email:
       info@spier,be

    Web:
       <http://www.spier.be/>

    Last modified:
       02 March 1999.

 5.9.  VirgoPlus sprl

         Rue Dartois 1
         B-4000 Liege

    Phone:
       +32 4 253 00 59

    Fax:
       +32 4 253 00 49

    Email:
       [email protected]

    Web:
       <http://www.virgoplus.com/>

    Contact:
       Bruno Mairlot [email protected]

    Type of support:
       By phone, email, or remote networked administration, inhouse,
       onsite

    Special expertise:
       Installation, configuration, administration of Linux, internet
       connection, intranet developpment, firewalls, samba, netatalk,
       firewalls, proxys, DNS, web server (Apache), mod_perl, MySQL,
       Gui interface developpment (GTK+).  We have acquired a special
       expertise with the Red Hat distributions.

    Last modified:
       28 June 1999.

 6.  Belgian Linux resources

 6.1.  Websites

 6.1.1.  Linux in Belgium

 �  Linux in Belgium <http://linbel.iguana.be/>

 �  Belgian HOWTO <http://dag.mind.be/howto/Belgian-HOWTO.html>

 6.1.2.  Dutch Linux-sites

 �  <http://nl.linux.org/doc/>

 �  Nederlandstalige Linux Documentatie Project
    <http://doc.nllgg.nl/products/>

 �  Linux Support Website <http://www.linux-nl.cx/>

 �  Beginnen met Linux
    <http://user.online.be/~koendb/linux_beginners.html>

 �  Installatie Handleiding RedHat 5.2
    <http://user.online.be/~koendb/redhat.html>

 6.1.3.  French Linux-sites

 �  linuxbe.org <http://linuxbe.org/>

 6.1.4.  Mirrors in Belgium

 �  Freshmeat at Chello (TVD) <http://be.eu.mirrors.freshmeat.net/>

 �  Linuxberg at Wallonie Internet <http://winbe.linuxberg.com/>

 �  Linuxberg at Online <http://online.linuxberg.com/>

 �  Linuxberg at Pandora (Telenet) <http://linuxberg.pandora.be/>

 �  Linux Gazette at Belnet
    <http://sunsite.belnet.be/alug/ftp_mirrors/linux_gazette/>

 6.2.  HOWTO

 The most important collection of Linux information on the net. Please
 if you encounter erroneous information in one of them, do contact the
 author. Only that way it will be corrected and we all stand together
 ;)

 6.2.1.  Web

 �  HOWTO's at KULeuven <http://www.kulnet.kuleuven.ac.be/LDP/HOWTO/>

 �  HOWTO's at SIN <http://www.sin.khk.be/mirror/LDP/>

 6.2.2.  FTP

 �  HOWTO's at Belnet
    <ftp://ftp.belnet.be/mirror/sunsite.unc.edu/pub/Linux/docs/HOWTO/INDEX.html>

 6.3.  FTP

 Most of the times, it doesn't matter where you got it from, as long as
 it works. But to save you some time and save us some bandwidth, it's
 much better to get it near you ;) Naturally I forgot some, please send
 your additions or corrections.

 6.3.1.  Kernel-sources

 �  Official Mirror kernel-sources at Chello (TVD)
    <ftp://ftp.be.kernel.org/>

 �  Mirror kernel-sources at linux.be.eu.org
    <ftp://ftp.linux.be.eu.org/mirrors/ftp.kernel.org/>

 �  Mirror kernel-sources at Digibel
    <ftp://ftp.digibel.be/pub/mirrors/ftp.kernel.org/>

 6.3.2.  Distributions

 �  Red Hat

 �  Official Mirror at Belnet
    <ftp://ftp.belnet.be/mirror/ftp.redhat.com/>

 �  Mirror at Chello (TVD) <ftp://ftp.chello.be/mirror/ftp.redhat.com/>

 �  Mirror at linux.be.eu.org
    <ftp://ftp.linux.be.eu.org/mirrors/ftp.redhat.com/>

 �  Mirror at Pandora (Telenet)
    <ftp://mirrors.pandora.be/mirrors/ftp.redhat.com/>

 �  Mirror at Digibel
    <ftp://ftp.digibel.be/pub/mirrors/ftp.redhat.com/>

 �  Debian

 �  Official Mirror at KULeuven
    <ftp://ftp.kulnet.kuleuven.ac.be/pub/mirror/ftp.debian.org/>

 �  Official Mirror  at spnet <ftp://debian.spnet.net/>

 �  Mirror at EUnet <ftp://ftp.eunet.be/pub/linux/debian/>

 �  Mirror at Skynet
    <ftp://ftp.skynet.be/mirror/linux/distributions/debian/>

 �  Mirror at Pandora (Telenet)
    <ftp://mirrors.pandora.be/mirrors/ftp.debian.org/>

 �  Mirror at Interpac
    <ftp://ftp.interpac.be/mirror/linux/distributions/debian/>

 �  Slackware

 �  Official Mirror at Interpac
    <ftp://ftp.interpac.be/mirror/linux/distributions/slackware/>

 �  Mirror at Skynet
    <ftp://ftp.skynet.be/mirror/linux/distributions/slackware/>

 �  Mirror at Globe <ftp://ftp.glo.be/pub/mirror/Slackware-3.6/>

 �  SuSE

 �  Mirror at Pandora (Telenet) <ftp://mirrors.pandora.be/mirrors/>

 �  Mandrake

 �  Mirror at Belnet <ftp://ftp.belnet.be/packages/mandrake/>

 6.3.3.  Software

 �  Mirrors at Belnet <ftp://ftp.belnet.be/mirror/>

 �  Mirrors at Chello (TVD) <ftp://ftp.chello.be/mirror/>

 �  Mirrors at linux.be.eu.org <ftp://ftp.linux.be.eu.org/mirrors/>

 �  Mirrors at Pandora (Telenet) <ftp://mirrors.pandora.be/mirrors/>

 �  Mirrors at Digibel <ftp://ftp.digibel.be/pub/mirrors/>

 6.4.  Usenet

 �  <news:be.comp.os.linux> at WebWatch
    <http://www.webwatch.be/forums/be.comp.os.linux/MainTable.html>

 6.5.  Mailinglists

 6.5.1.  Linux user groups

 �  BLUG Mailinglist

 �  L2U Mailinglist

 �  LILUG Mailinglist

 �  LGOVL Mailinglist

 6.6.  IRC

 The fastest medium to get support is IRC, but beware. Because IRC is
 rather anonymous it's also easy to fool people.

 On IRCnet there's a channel called #linux.be that is closely related
 to bcol and the Belgian Linux-scene. The channel is still small, but
 it surely will grow in time. To get help in English, there's only one
 place #linux.