Date: Fri 1 Jun 90 13:43:04-EST
From: [email protected]
Subject: TS-140S TX All Freq Mod

To enable the TS-140S for transmitting on all bands:

1. Disconnect radio from power supply and antenna
2. Remove top and Bottom covers
3. Locate the control board (I believe it is on the bottom --NOT BEHIND TH
  THE KNOBS LIKE THE 440!!)
4. Cut D31 on the control board
5. Reassemble the radio
6. Reset the radio by holding the A=B switch while powering up the rig.

Disclaimer:  This Modification is for those who need it to operate MARS only.

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.