Date: 4 Apr 89 14:24:01 GMT
Subject: PRO-34 Scanner Modifications

   In  the  May 1989  edition  of  Popular  Communications  is a
"Letter  to the Editor" on the Radio Shack PRO-34 Scanner.  Below
is the text of that letter.


                 PRO-34 Scanner Modification

   In regard to the information  presented (March Issue)  on the
handheld Radio Shack PRO-34 scanner,  my own observations  on the
modifications have been:

1. To restore missing 800 MHz frequencies, remove D-11.

2. To add 66 to 88 MHz  (European Coverage),  install a diode at
  D-9.

3. D-10 must remain in place for full 800 MHz coverage.

4. If a diode is added at D-13 it cuts out aero band, also seems
  to affect 800 MHz channel spacing.

5. D-12 added dosen't seem to have any affect.

6. Only D-10 and D-11 are factory installed.

   I  wish to thank you  for a fine and informative  magazine. I
have had much reading enjoyment.

                            Sam S. Jones,
                            Rebel Antenna,
                            Falls Church, VA

--
Julian Macassey, n6are  julian@bongo    ucla-an!denwa!bongo!julian
n6are@wb6ymh (Packet Radio) n6are.ampr.org [44.16.0.81] voice (213) 653-4495

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.