From: [email protected] (robert Steuer)
Newsgroups: alt.radio.scanner
Subject: PRO-2026 MODS!!!
Message-ID: <[email protected]>
Date: 20 Oct 92 14:55:50 GMT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 29

Hi all, just got these mods, hot off the FAX!

Note: It is not lawful to monitor cellular or conventional mobile
     telephone conversations.

The 2026 has cellular frequencies deleted at the factory, but
restoration is the easiest ever! - clip one marked wire!  All you need
is a Philips screwdriver and wire cutters.

1. Turn the scanner upside-down and remove the four side screws
holding the bottom cover in place; pull the cover loose and set it
back about two inches out of the way.

2. Locate the small circuit board at the lower right-hand corner and
find jumper L201.  Cut it and slightly separate the break.

3. Reassemble the radio which now has continuous 806-956 MHz coverage
and 30KHz search increments in the cellular band.

*** I have not tried the above mod, but did acquire it from a
commercial radio dealer who is very respectable, so as always, proceed
at your own risk and realize that this will violate your warranty!

                                Have Fun!
                                  Rob KF2EK
-------------------------------------------------------------------------------
| Robert Steuer               Internet: [email protected]               |
| Rutgers University          Amateur Radio: KF2EK@N3FOA.#EPA.PA.USA.NA       |
-------------------------------------------------------------------------------

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.