Note: The Electronics Communcations Privacy Acot of 1986 makes
it unlawful to monitor mobile telephones, including Cellular.
The Following modification is intended only to restore contin-
uous 760-1300 MHz coverage as originally provided by the design
of the PRO-2026 Microprocessor.
824-851, 869-896 MHz Freq Restoration :
The Pro-2026 has cellular frequencies deleted at the factory,
but restoration is the easiest I've ever seen - clip one marked
wire! All you need is a Phillips screwdriver and wire cutters.
(1) Turn the scanner upside-down and remove the four side screws
holding the bottom cover in place; pull the cover loose and
set it back about two inches out of the way.
(2) Locate the small circuit board at the lower right-hand
corner and find jumper L201. Cut it and slightly separate
the break.
(3) Reassemble the radio which now has continuous 806-956Mhz
coverage and 30 khz increments in the cellular band.
This is a very senitivie scanner. you will find it pick up very
well for a mobile radio. Have fun with it. 73's KA4NMX.....
