Newsgroups: rec.radio.amateur.misc
From: [email protected] (Forrest Cook)
Subject: Re: How to broadband a Yaesu FT-757GXII?
Message-ID: <[email protected]>
Sender: [email protected] (USENET Maintenance)
Organization: Atmospheric Technology Division/NCAR Boulder, CO
References: <[email protected]>
Distribution: usa
Date: Wed, 4 Nov 1992 04:54:08 GMT
Lines: 14

In article <[email protected]> [email protected]
(Forrest Cook) (me) writes:
>Does anybody have information on how to "broadband" a Yaesu FT-757GX II
>transceiver?

Just after posting the article a friend of mine came in and he found
the unmarked switch on the upper main board near the display board and
under a bundle of wires.

1: remove the top cover
2: locate the small black switch that is located on the edge of the
  big horizontal board near the back of the main tuning dial.  The switch
  was under a bundle of wires.  You do not need to remove the metal cover
  from the board.
3: flip the switch.
4: replace the top cover.

Forrest Cook
[email protected] WB0RIO
{husc6|rutgers|ames|gatech}!ncar!stout!cook

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.