DJ580.2

de Tony ke3ed @ k3oiw.


Hello all,
I have seen several msgs requesting details on how to connect a TNC to
the ALINCO DJ580 h/held,so heres how i did it !!!
(after immense fiddling,these are the connections used for 6 months)


                       tip  ..  ..ring  ....body
                             .  .       .
                             .  .       .=
                             O [] ========   3.5mm plug
                             .  .       .=
               rx audio ......  .       .
                                ..n/c   ..gnd



                                          =
                              O [] ========    2.5mm plug
                              :           =
                TX audio......:
                             ---
                             : :  10 k resistor
                             : :
                             ---
                              :
                TX ...........:


so,the only connection to the 2.5mm plug is to the TIP!!!! tip=TX audio
TX is to tip via 10k resistor. "sleeve & ring" NO CONNECTIONS

RX audio=TIP of 3.5mm,sleeve NO CONNECTION,body=gnd

Please let me know if this is of any use to you.
don't forget- DO NOT insert/remove plugs while the rig or tnc is on !!

73,Paul G1XUL--HOMEBBS=GB7BAD--AMIGA/AMIPAC--TINY2--DJ580--FREQ 433.675




You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.