From
[email protected] Mon Sep 20 09:11:19 1993
Xref: news.cs.tut.fi rec.radio.scanner:402 alt.radio.scanner:7204
Newsgroups: rec.radio.scanner,alt.radio.scanner
Path: news.cs.tut.fi!news.funet.fi!sunic!mcsun!uunet!elroy.jpl.nasa.gov!decwrl!netcomsv!netcom.com!mjr
From:
[email protected] (Matthew Rapaport)
Subject: Re: AOR AR-3000 changing priority channel test time.
Message-ID: <
[email protected]>
Organization: Netcom Online Communications Services (408-241-9760 login: guest)
References: <
[email protected]> <
[email protected]>
Date: Thu, 16 Sep 1993 22:24:58 GMT
Lines: 25
In article <
[email protected]>
[email protected] (Phil Clark) writes:
>From article <
[email protected]>, by
[email protected] (Matthew Rapaport):
>> Someone once posted the only undocumented command for the AR3000 I've ever
>> seen. It involved changing the time interval the scanner uses to check the
>> priority channel. Can someone repost this sequence of keystrokes?
>
>
>And could they also say if this is for the AR3000 or the AR3000A.
>
Someone already replied to me by mail but as I thought, the subject is
of more general interest...
The secret: press DIAL (get out of memory mode), then 2ndF then HOLD DOWN
the PRIO key for 2 seconds. This gives you a display showing the priority
test time in seconds. Just change it to what ever you want... then
press ENTER.
Yes it works on the 3000A, I don't know about the older model...
>
--
matthew rapaport Philosopher/Programmer At Large KD6KVH
[email protected] [email protected]
