NAME
GPSD::Parse - Parse, extract use the JSON output from GPS units
SYNOPSIS
use GPSD::Parse;
my $gps = GPSD::Parse->new;
# start the data flow, and poll for data
$gps->on;
$gps->poll;
# get all TPV data in an href
my $tpv_href = $gps->tpv;
# get individual TPV stats
print $gps->tpv('lat');
print $gps->tpv('lon');
# timestamp of the most recent poll
print $gps->time;
# get all satellites in an href of hrefs
my $sats = $gps->satellites;
# get an individual piece of info from a single sattelite
print $gps->satellites(16, 'ss');
# check which serial device the GPS is connected to
print $gps->device;
# stop capturing data
$gps->off;
DESCRIPTION
Simple, lightweight distribution that polls `gpsd' for data received
from a UART (serial) connected GPS receiver over a TCP connection.
The data is fetched in JSON, and returned as Perl data.
NOTES
Requirements
A version of gpsd that returns results in JSON format is required to
have been previously installed. It should be started at system startup,
with the following flags with system-specific serial port. See the above
link for information on changing the listen IP and port.
sudo gpsd -n /dev/ttyS0 -F /var/log/gpsd.sock
Available Data
Each of the methods that return data have a table in their respective
documentation within the METHODS section. Specifically, look at the
`tpv()', `sattelites()' and the more broad `sky()' method sections to
understand what available data attributes you can extract.
METHODS
new(%args)
Instantiates and returns a new GPSD::Parse object instance.
Parameters:
host => 127.0.0.1
Optional, String: An IP address or fully qualified domain name of the
`gpsd' server. Defaults to the localhost (`127.0.0.1') if not supplied.
port => 2947
Optional, Integer: The TCP port number that the `gpsd' daemon is running
on. Defaults to `2947' if not sent in.
on
Puts `gpsd' in listening mode, ready to poll data from.
If this method is not called, a warning will be thrown when you
`poll()', and your dataset will be incomplete (ie. invalid).
off
Turns off `gpsd' listening mode.
Not necessary to call, but it will help preserve battery life if running
on a portable device.
poll(%args)
Does a poll of `gpsd' for data, and configures the object with that
data.
Parameters:
All parameters are sent in as a hash.
fname => $filename
Optional, String: Used for testing, you can send in the name of a JSON
file that contains `gpsd' JSON data and we'll work with that instead of
polling the GPS device directly.
return => 'json'
Optional, String: By default, after configuring the object, we will
return the polled raw data as a Perl hash reference. Send this param in
with the value of `'json'' and we'll return the data exactly as we
received it from `gpsd'.
Returns:
The raw poll data as either a Perl hash reference structure or as the
original JSON string.
tpv($stat)
`TPV' stands for "Time Position Velocity". This is the data that
represents your location and other vital statistics.
By default, we return a hash reference that is in the format `stat ='
'value'>.
Parameters:
$stat
Optional, String. You can extract individual statistics of the TPV data
by sending in the name of the stat you wish to fetch. This will then
return the string value if available. Returns `undef' if the statistic
doesn't exist.
Available statistic/info name, example value, description. This is the
default raw result:
time => '2017-05-16T22:29:29.000Z' # date/time in UTC
lon => '-114.000000000' # longitude
lat => '51.000000' # latitude
alt => '1084.9' # altitude (metres)
climb => '0' # rate of ascent/decent (metres/sec)
speed => '0' # rate of movement (metres/sec)
track => '279.85' # heading (degrees from true north)
device => '/dev/ttyS0' # GPS serial interface
mode => 3 # NMEA mode
epx => '3.636' # longitude error estimate (metres)
epy => '4.676' # latitude error estimate (metres)
epc => '8.16' # ascent/decent error estimate (meters)
ept => '0.005' # timestamp error (sec)
epv => '4.082' # altitude error estimate (meters)
eps => '9.35' # speed error estimate (metres/sec)
class => 'TPV' # data type (fixed as TPV)
tag => 'ZDA' # identifier
satellites($num, $stat)
This method returns a hash reference of hash references, where the key
is the satellite number, and the value is a hashref that contains the
various information related to the specific numbered satellite.
Note that the data returned by this function has been manipuated and is
not exactly equivalent of that returned by `gpsd'. To get the raw data,
see `sky()'.
Parameters:
$num
Optional, Integer: Send in the satellite number and we'll return the
relevant information in a hash reference for the specific satellite
requested, as opposed to returning data for all the satellites. Returns
`undef' if a satellite by that number doesn't exist.
$stat
Optional, String: Like `tpv()', you can request an individual piece of
information for a satellite. This parameter is only valid if you've sent
in the `$num' param, and the specified satellite exists.
Available statistic/information items available for each satellite,
including the name, an example value and a description:
NOTE: The PRN attribute will not appear unless you're using raw data.
The PRN can be found as the satellite hash reference key after we've
processed the data.
PRN => 16 # PRN ID of the satellite
# 1-63 are GNSS satellites
# 64-96 are GLONASS satellites
# 100-164 are SBAS satellites
ss => 20 # signal strength (dB)
az => 161 # azimuth (degrees from true north)
used => 1 # currently being used in calculations
el => 88 # elevation in degrees
sky
Returns a hash reference containing all of the data that was pulled from
the `SKY' information returned by `gpsd'. This information contains
satellite info and other related statistics.
Available information, with the attribute, example value and
description:
satellites => [] # array of satellite hashrefs
xdop => '0.97' # longitudinal dilution of precision
ydop => '1.25' # latitudinal dilution of precision
pdop => '1.16' # spherical dilution of precision
tdop => '2.2' # time dilution of precision
vdop => '0.71' # altitude dilution of precision
gdop => '3.87' # hyperspherical dilution of precision
hdop => '0.92' # horizontal dilution of precision
class => 'SKY' # object class, hardcoded to SKY
tag => 'ZDA' # object ID
device => '/dev/ttyS0' # serial port connected to the GPS
device
Returns a string containing the actual device the GPS is connected to
(eg: `/dev/ttyS0').
time
Returns a string of the date and time of the most recent poll, in UTC.
SEE ALSO
A very similar distribution is Net::GPSD3. However, it has a long line
of prerequisite distributions that didn't always install easily on my
primary target platform, the Raspberry Pi.
This distribution isn't meant to replace that one, it's just a much
simpler and more lightweight piece of software that pretty much does the
same thing.
AUTHOR
Steve Bertrand, `<steveb at cpan.org>'
LICENSE AND COPYRIGHT
Copyright 2017 Steve Bertrand.
This program is free software; you can redistribute it and/or modify it
under the terms of either: the GNU General Public License as published
by the Free Software Foundation; or the Artistic License.
See
http://dev.perl.org/licenses/ for more information.
