NAME
Oraperl - [DEPRECATED] Perl access to Oracle databases for old oraperl
scripts
VERSION
version 1.51
SYNOPSIS
eval 'use Oraperl; 1;' || die $@ if $] >= 5; # ADD THIS LINE TO OLD SCRIPTS
$lda = &ora_login($system_id, $name, $password)
$csr = &ora_open($lda, $stmt [, $cache])
&ora_bind($csr, $var, ...)
&ora_fetch($csr [, $trunc])
&ora_close($csr)
&ora_logoff($lda)
&ora_do($lda, $stmt)
&ora_titles($csr)
&ora_lengths($csr)
&ora_types($csr)
&ora_commit($lda)
&ora_rollback($lda)
&ora_autocommit($lda, $on_off)
&ora_version()
$ora_cache
$ora_long
$ora_trunc
$ora_errno
$ora_errstr
$ora_verno
$ora_debug
DESCRIPTION
NOTE: the use of *Oraperl* is deprecated in favor of DBD::Oracle, and
currently exist only as a backward compatible interface for this module.
Oraperl is an extension to Perl which allows access to Oracle databases.
The original oraperl was a Perl 4 binary with Oracle OCI compiled into
it. The Perl 5 Oraperl module described here is distributed with
DBD::Oracle (a database driver what operates within DBI) and adds an
extra layer over DBI method calls. The Oraperl module should only be
used to allow existing Perl 4 oraperl scripts to run with minimal
changes; any new development should use DBI directly.
The functions which make up this extension are described in the
following sections. All functions return a false or undefined (in the
Perl sense) value to indicate failure. You do not need to understand the
references to OCI in these descriptions. They are here to help those who
wish to extend the routines or to port them to new machines.
The text in this document is largely unchanged from the original Perl4
oraperl manual written by Kevin Stock <
[email protected]>. Any comments
specific to the DBD::Oracle Oraperl emulation are prefixed by DBD:. See
the DBD::Oracle and DBI manuals for more information.
DBD: In order to make the oraperl function definitions available in
perl5 you need to arrange to 'use' the Oraperl.pm module in each file or
package which uses them. You can do this by simply adding "use Oraperl;"
in each file or package. If you need to make the scripts work with both
the perl4 oraperl and perl5 you should add add the following text
instead:
eval 'use Oraperl; 1;' || die $@ if $] >= 5;
Principal Functions
The main functions for database access are &ora_login(), &ora_open(),
&ora_bind(), &ora_fetch(), &ora_close(), &ora_do() and &ora_logoff().
* ora_login
$lda = &ora_login($system_id, $username, $password)
In order to access information held within an Oracle database, a
program must first log in to it by calling the &ora_login() function.
This function is called with three parameters, the system ID (see
below) of the Oracle database to be used, and the Oracle username and
password. The value returned is a login identifier (actually an Oracle
Login Data Area) referred to below as $lda.
Multiple logins may be active simultaneously. This allows a simple
mechanism for correlating or transferring data between databases.
Most Oracle programs (for example, SQL*Plus or SQL*Forms) examine the
environment variable ORACLE_SID or TWO_TASK to determine which
database to connect to. In an environment which uses several different
databases, it is easy to make a mistake, and attempt to run a program
on the wrong one. Also, it is cumbersome to create a program which
works with more than one database simultaneously. Therefore, Oraperl
requires the system ID to be passed as a parameter. However, if the
system ID parameter is an empty string then oracle will use the
existing value of ORACLE_SID or TWO_TASK in the usual manner.
Example:
$lda = &ora_login('personnel', 'scott', 'tiger') || die $ora_errstr;
This function is equivalent to the OCI olon and orlon functions.
DBD: note that a name is assumed to be a TNS alias if it does not
appear as the name of a SID in /etc/oratab or /var/opt/oracle/oratab.
See the code in Oracle.pm for the full logic of database name
handling.
DBD: Since the returned $lda is a Perl5 reference the database login
identifier is now automatically released if $lda is overwritten or
goes out of scope.
* ora_open
$csr = &ora_open($lda, $statement [, $cache])
To specify an SQL statement to be executed, the program must call the
&ora_open() function. This function takes at least two parameters: a
login identifier (obtained from &ora_login()) and the SQL statement to
be executed. An optional third parameter specifies the size of the row
cache to be used for a SELECT statement. The value returned from
&ora_open() is a statement identifier (actually an ORACLE Cursor)
referred to below as $csr.
If the row cache size is not specified, a default size is used. As
distributed, the default is five rows, but this may have been changed
at your installation (see the &ora_version() function and $ora_cache
variable below).
Examples:
$csr = &ora_open($lda, 'select ename, sal from emp order by ename', 10);
$csr = &ora_open($lda, 'insert into dept values(:1, :2, :3)');
This function is equivalent to the OCI oopen and oparse functions. For
statements which do not contain substitution variables (see the
section Substitution Variables below), it also uses of the oexec
function. For SELECT statements, it also makes use of the odescr and
odefin functions to allocate memory for the values to be returned from
the database.
* ora_bind
&ora_bind($csr, $var, ...)
If an SQL statement contains substitution variables (see the section
Substitution Variables below), &ora_bind() is used to assign actual
values to them. This function takes a statement identifier (obtained
from &ora_open()) as its first parameter, followed by as many
parameters as are required by the statement.
Example:
&ora_bind($csr, 50, 'management', 'Paris');
This function is equivalent to the OCI obndrn and oexec statements.
The OCI obndrn function does not allow empty strings to be bound. As
distributed, $ora_bind therefore replaces empty strings with a single
space. However, a compilation option allows this substitution to be
suppressed, causing &ora_bind() to fail. The output from the
&ora_version() function specifies which is the case at your
installation.
* ora_fetch
$nfields = &ora_fetch($csr)
@data = &ora_fetch($csr [, $trunc])
The &ora_fetch() function is used in conjunction with a SQL SELECT
statement to retrieve information from a database. This function takes
one mandatory parameter, a statement identifier (obtained from
&ora_open()).
Used in a scalar context, the function returns the number of fields
returned by the query but no data is actually fetched. This may be
useful in a program which allows a user to enter a statement
interactively.
Example:
$nfields = &ora_fetch($csr);
Used in an array context, the value returned is an array containing
the data, one element per field. Note that this will not work as
expected:
@data = &ora_fetch($csr) || die "..."; # WRONG
The || forces a scalar context so ora_fetch returns the number of
fields.
An optional second parameter may be supplied to indicate whether the
truncation of a LONG or LONG RAW field is to be permitted (non-zero)
or considered an error (zero). If this parameter is not specified, the
value of the global variable $ora_trunc is used instead. Truncation of
other datatypes is always considered a error.
DBD: The optional second parameter to ora_fetch is not supported. A
DBI usage error will be generated if a second parameter is supplied.
Use the global variable $ora_trunc instead. Also note that the
experimental DBI blob_read method can be used to retrieve a long:
$csr->blob_read($field, $offset, $len [, \$dest, $destoffset]);
If truncation occurs, $ora_errno will be set to 1406. &ora_fetch()
will complete successfully if truncation is permitted, otherwise it
will fail.
&ora_fetch() will fail at the end of the data or if an error occurs.
It is possible to distinguish between these cases by testing the value
of the variable $ora_errno. This will be zero for end of data,
non-zero if an error has occurred.
Example:
while (($deptno, $dname, $loc) = &ora_fetch($csr))
{
warn "Truncated!!!" if $ora_errno == 1406;
# do something with the data
}
warn $ora_errstr if $ora_errno;
This function is equivalent to the OCI ofetch function.
* ora_close
&ora_close($csr)
If an SQL statement is no longer required (for example, all the data
selected has been processed, or no more rows are to be inserted) then
the statement identifier should be released. This is done by calling
the &ora_close() function with the statement identifier as its only
parameter.
This function is equivalent to the OCI oclose function.
DBD: Since $csr is a Perl5 reference the statement/cursor is now
automatically closed if $csr is overwritten or goes out of scope.
* ora_do
&ora_do($lda, $statement)
Not all SQL statements return data or contain substitution variables.
In these cases the &ora_do() function may be used as an alternative to
&ora_open() and &ora_close(). This function takes two parameters, a
login identifier and the statement to be executed.
Example:
&ora_do($lda, 'drop table employee');
This function is roughly equivalent to
&ora_close( &ora_open($lda, $statement) )
DBD: oraperl v2 used to return the string 'OK' to indicate success
with a zero numeric value. The Oraperl emulation now uses the string
'0E0' to achieve the same effect since it does not cause any "-w"
warnings when used in a numeric context.
* ora_logoff
&ora_logoff($lda)
When the program no longer needs to access a given database, the login
identifier should be released using the &ora_logoff() function.
This function is equivalent to the OCI ologoff function.
DBD: Since $lda is a Perl5 reference the database login identifier is
now automatically released if $lda is overwritten or goes out of
scope.
Ancillary Functions
Additional functions available are: &ora_titles(), &ora_lengths(),
&ora_types(), &ora_autocommit(), &ora_commit(), &ora_rollback() and
&ora_version().
The first three are of most use within a program which allows statements
to be entered interactively. See, for example, the sample program sql
which is supplied with Oraperl and may have been installed at your site.
* ora_titles
@titles = &ora_titles($csr)
A program may determine the field titles of an executed query by
calling &ora_titles(). This function takes a single parameter, a
statement identifier (obtained from &ora_open()) indicating the query
for which the titles are required. The titles are returned as an array
of strings, one for each column.
Titles are truncated to the length of the field, as reported by the
&ora_lengths() function.
DBD: oraperl v2.2 actually changed the behaviour such that the titles
were not truncated unless an optional second parameter was true. This
was not reflected in the oraperl manual. The Oraperl emulation adopts
the non truncating behaviour and doesn't support the truncate
parameter.
* ora_lengths
@lengths = &ora_lengths($csr)
A program may determine the length of each of the fields returned by a
query by calling the &ora_lengths() function. This function takes a
single parameter, a statement identifier (obtained from &ora_open())
indicating the query for which the lengths are required. The lengths
are returned as an array of integers, one for each column.
* ora_types
@types = &ora_types($csr)
A program may determine the type of each of the fields returned by a
query by calling the &ora_types() function. This function takes a
single parameter, a statement identifier (obtained from &ora_open())
indicating the query for which the lengths are required. The types are
returned as an array of integers, one for each field.
These types are defined in your OCI documentation. The correct
interpretation for Oracle v6 is given in the file oraperl.ph.
* ora_autocommit
&ora_autocommit($lda, $on_or_off)
Autocommit mode (in which each transaction is committed immediately,
without waiting for an explicit commit) may be enabled or disabled
using &ora_autocommit(). This function takes two parameters, a login
identifier (obtained from &ora_login()) and a true/false value
indicating whether autocommit is to be enabled (non-zero) or disabled
(zero). By default, autocommit is off.
Note that autocommit can only be set per login, not per statement. If
you need to control autocommit by statement (for example, to allow
deletions to be rolled back, but insertions to be committed
immediately) you should make multiple calls to &ora_login() and use a
separate login identifier for each statement.
* ora_commit, ora_rollback
&ora_commit($lda)
&ora_rollback($lda)
Modifications to a database may be committed or rolled back using the
&ora_commit() and &ora_rollback() functions. These functions take a
single parameter, a login identifier obtained from &ora_login().
Transactions which have been committed (either explicitly by a call to
&ora_commit() or implicitly through the use of &ora_autocommit())
cannot be subsequently rolled back.
Note that commit and rollback can only be used per login, not per
statement. If you need to commit or rollback by statement you should
make multiple calls to &ora_login() and use a separate login
identifier for each statement.
* ora_version
&ora_version()
The &ora_version() function prints the version number and copyright
information concerning Oraperl. It also prints the values of various
compilation time options. It does not return any value, and should not
normally be used in a program.
Example:
perl -MOraperl -e 'ora_version()'
This is Oraperl, version 2, patch level 0.
Debugging is available, including the -D flag.
Default fetch row cache size is 5.
Empty bind values are replaced by a space.
Perl is copyright by Larry Wall; type oraperl -v for details.
Additions for oraperl: Copyright 1991, 1992, Kevin Stock.
Oraperl may be distributed under the same conditions as Perl.
This function is the equivalent of Perl's "-v" flag.
DBD: The Oraperl emulation printout is similar but not identical.
VARIABLES
Six special variables are provided, $ora_cache, $ora_long, $ora_trunc,
$ora_errno, $ora_errstr and $ora_verno.
Customisation Variables
These variables are used to dictate the behaviour of Oraperl under
certain conditions.
* $ora_cache
The $ora_cache variable determines the default cache size used by the
&ora_open() function for SELECT statements if an explicit cache size
is not given.
It is initialised to the default value reported by &ora_version() but
may be set within a program to apply to all subsequent calls to
&ora_open(). Cursors which are already open are not affected. As
distributed, the default value is five, but may have been altered at
your installation.
As a special case, assigning zero to $ora_cache resets it to the
default value. Attempting to set $ora_cache to a negative value
results in a warning.
* $ora_long
Normally, Oraperl interrogates the database to determine the length of
each field and allocates buffer space accordingly. This is not
possible for fields of type LONG or LONGRAW. To allocate space
according to the maximum possible length (65535 bytes) would obviously
be extremely wasteful of memory.
Therefore, when &ora_open() determines that a field is a LONG type, it
allocates the amount of space indicated by the $ora_long variable.
This is initially set to 80 (for compatibility with Oracle products)
but may be set within a program to whatever size is required.
$ora_long is only used when fetching data, not when inserting it.
* $ora_trunc
Since Oraperl cannot determine exactly the maximum length of a LONG
field, it is possible that the length indicated by $ora_long is not
sufficient to store the data fetched. In such a case, the optional
second parameter to &ora_fetch() indicates whether the truncation
should be allowed or should provoke an error.
If this second parameter is not specified, the value of $ora_trunc is
used as a default. This only applies to LONG and LONGRAW data types.
Truncation of a field of any other type is always considered an error
(principally because it indicates a bug in Oraperl).
Status Variables
These variables report information about error conditions or about
Oraperl itself. They may only be read; a fatal error occurs if a program
attempts to change them.
* $ora_errno
$ora_errno contains the Oracle error code provoked by the last
function call.
There are two cases of particular interest concerning &ora_fetch(). If
a LONG or LONGRAW field is truncated (and truncation is allowed) then
&ora_fetch() will complete successfully but $ora_errno will be set to
1406 to indicate the truncation. When &ora_fetch() fails, $ora_errno
will be set to zero if this was due to the end of data or an error
code if it was due to an actual error.
* $ora_errstr
The $ora_errstr variable contains the Oracle error message
corresponding to the current value of $ora_errno.
* $ora_verno
The $ora_verno variable contains the version number of Oraperl in the
form v.ppp where v is the major version number and ppp is the
patchlevel. For example, in Oraperl version 3, patch level 142,
$ora_verno would contain the value 3.142 (more or less, allowing for
floating point error).
SUBSTITUTION VARIABLES
Oraperl allows an SQL statement to contain substitution variables. These
consist of a colon followed by a number. For example, a program which
added records to a telephone list might use the following call to
&ora_open():
$csr = &ora_open($csr, "insert into telno values(:1, :2)");
The two names :1 and :2 are called substitution variables. The function
&ora_bind() is used to assign values to these variables. For example,
the following statements would add two new people to the list:
&ora_bind($csr, "Annette", "472-8836");
&ora_bind($csr, "Brian", "937-1823");
Note that the substitution variables must be assigned consecutively
beginning from 1 for each SQL statement, as &ora_bind() assigns its
parameters in this order. Named substitution variables (for example,
:NAME, :TELNO) are not permitted.
DBD: Substitution variables are now bound as type 1 (VARCHAR2) and not
type 5 (STRING) by default. This can alter the behaviour of SQL code
which compares a char field with a substitution variable. See the String
Comparison section in the Datatypes chapter of the Oracle OCI manual for
more details.
You can work around this by using DBD::Oracle's ability to specify the
Oracle type to be used on a per field basis:
$char_attrib = { ora_type => 5 }; # 5 = STRING (ala oraperl2.4)
$csr = ora_open($dbh, "select foo from bar where x=:1 and y=:2");
$csr->bind_param(1, $value_x, $char_attrib);
$csr->bind_param(2, $value_y, $char_attrib);
ora_bind($csr); # bind with no parameters since we've done bind_param()'s
DEBUGGING
DBD: The Oraperl $ora_debug variable is not supported. However detailed
debugging can be enabled at any time by executing
$h->debug(2);
where $h is either a $lda or a $csr. If debugging is enabled on an $lda
then it is automatically passed on to any cursors returned by
&ora_open().
EXAMPLE
format STDOUT_TOP =
Name Phone
==== =====
.
format STDOUT =
@<<<<<<<<<< @>>>>>>>>>>
$name, $phone
.
die "You should use oraperl, not perl\n" unless defined &ora_login;
$ora_debug = shift if $ARGV[0] =~ /^\-#/;
$lda = &ora_login('t', 'kstock', 'kstock')
|| die $ora_errstr;
$csr = &ora_open($lda, 'select * from telno order by name')
|| die $ora_errstr;
$nfields = &ora_fetch($csr);
print "Query will return $nfields fields\n\n";
while (($name, $phone) = &ora_fetch($csr)) { write; }
warn $ora_errstr if $ora_errno;
die "fetch error: $ora_errstr" if $ora_errno;
do ora_close($csr) || die "can't close cursor";
do ora_logoff($lda) || die "can't log off Oracle";
NOTES
In keeping with the philosophy of Perl, there is no pre-defined limit to
the number of simultaneous logins or SQL statements which may be active,
nor to the number of data fields which may be returned by a query. The
only limits are those imposed by the amount of memory available, or by
Oracle.
WARNINGS
The Oraperl emulation software shares no code with the original oraperl.
It is built on top of the new Perl5 DBI and DBD::Oracle modules. These
modules are still evolving. (One of the goals of the Oraperl emulation
software is to allow useful work to be done with the DBI and DBD::Oracle
modules whilst insulating users from the ongoing changes in their
interfaces.)
It is quite possible, indeed probable, that some differences in
behaviour will exist. These are probably confined to error handling.
All differences in behaviour which are not documented here should be
reported to to
[email protected].
SEE ALSO
DBD::Oracle
Oracle Documentation
SQL Language Reference Manual. Programmer's Guide to the Oracle Call
Interfaces.
Books
Programming Perl by Larry Wall and Randal Schwartz. Learning Perl by
Randal Schwartz.
AUTHOR
Original Oraperl 2.4 code and documentation by Kevin Stock
<
[email protected]>.
DBI and Oraperl emulation using DBD::Oracle by Tim Bunce.
MAINTAINER
As of DBD::Oracle release 1.17 in February 2006 The Pythian Group, Inc.
(<
http://www.pythian.com>) are taking the lead in maintaining
DBD::Oracle with my assistance and gratitude.
COPYRIGHT
Copyright (c) 1994-2006 Tim Bunce. Ireland. Copyright (c) 2006-2008 John
Scoles (The Pythian Group). Canada.
Oraperl and the DBD::Oracle module is free open source software; you can
redistribute it and/or modify it under the same terms as Perl 5.
AUTHORS
* Tim Bunce <
[email protected]>
* John Scoles
* Yanick Champoux <
[email protected]>
COPYRIGHT AND LICENSE
This software is copyright (c) 1994 by Tim Bunce.
This is free software; you can redistribute it and/or modify it under
the same terms as the Perl 5 programming language system itself.
