NAME
   common::sense - save a tree AND a kitten, use common::sense!

SYNOPSIS
      use common::sense;

      # Supposed to be mostly the same, with much lower memory usage, as:

      # use utf8;
      # use strict qw(vars subs);
      # use feature qw(say state switch);
      # use feature qw(unicode_strings unicode_eval current_sub fc evalbytes);
      # no feature qw(array_base);
      # no warnings;
      # use warnings qw(FATAL closed threads internal debugging pack
      #                 portable prototype inplace io pipe unpack malloc
      #                 glob digit printf layer reserved taint closure
      #                 semicolon);
      # no warnings qw(exec newline unopened);

DESCRIPTION
      “Nothing is more fairly distributed than common sense: no one thinks
      he needs more of it than he already has.”

      – René Descartes

   This module implements some sane defaults for Perl programs, as defined
   by two typical (or not so typical - use your common sense) specimens of
   Perl coders. In fact, after working out details on which warnings and
   strict modes to enable and make fatal, we found that we (and our code
   written so far, and others) fully agree on every option, even though we
   never used warnings before, so it seems this module indeed reflects a
   "common" sense among some long-time Perl coders.

   The basic philosophy behind the choices made in common::sense can be
   summarised as: "enforcing strict policies to catch as many bugs as
   possible, while at the same time, not limiting the expressive power
   available to the programmer".

   Two typical examples of how this philosophy is applied in practise is
   the handling of uninitialised and malloc warnings:

   *uninitialised*
       "undef" is a well-defined feature of perl, and enabling warnings for
       using it rarely catches any bugs, but considerably limits you in
       what you can do, so uninitialised warnings are disabled.

   *malloc*
       Freeing something twice on the C level is a serious bug, usually
       causing memory corruption. It often leads to side effects much later
       in the program and there are no advantages to not reporting this, so
       malloc warnings are fatal by default.

   Unfortunately, there is no fine-grained warning control in perl, so
   often whole groups of useful warnings had to be excluded because of a
   single useless warning (for example, perl puts an arbitrary limit on the
   length of text you can match with some regexes before emitting a
   warning, making the whole "regexp" category useless).

   What follows is a more thorough discussion of what this module does, and
   why it does it, and what the advantages (and disadvantages) of this
   approach are.

RATIONALE
   use utf8
       While it's not common sense to write your programs in UTF-8, it's
       quickly becoming the most common encoding, is the designated future
       default encoding for perl sources, and the most convenient encoding
       available (you can do really nice quoting tricks...). Experience has
       shown that our programs were either all pure ascii or utf-8, both of
       which will stay the same.

       There are few drawbacks to enabling UTF-8 source code by default
       (mainly some speed hits due to bugs in older versions of perl), so
       this module enables UTF-8 source code encoding by default.

   use strict qw(subs vars)
       Using "use strict" is definitely common sense, but "use strict
       'refs'" definitely overshoots its usefulness. After almost two
       decades of Perl hacking, we decided that it does more harm than
       being useful. Specifically, constructs like these:

          @{ $var->[0] }

       Must be written like this (or similarly), when "use strict 'refs'"
       is in scope, and $var can legally be "undef":

          @{ $var->[0] || [] }

       This is annoying, and doesn't shield against obvious mistakes such
       as using "", so one would even have to write (at least for the time
       being):

          @{ defined $var->[0] ? $var->[0] : [] }

       ... which nobody with a bit of common sense would consider writing:
       clear code is clearly something else.

       Curiously enough, sometimes perl is not so strict, as this works
       even with "use strict" in scope:

          for (@{ $var->[0] }) { ...

       If that isn't hypocrisy! And all that from a mere program!

   use feature qw(say state given ...)
       We found it annoying that we always have to enable extra features.
       If something breaks because it didn't anticipate future changes, so
       be it. 5.10 broke almost all our XS modules and nobody cared either
       (or at least I know of nobody who really complained about gratuitous
       changes - as opposed to bugs).

       Few modules that are not actively maintained work with newer
       versions of Perl, regardless of use feature or not, so a new major
       perl release means changes to many modules - new keywords are just
       the tip of the iceberg.

       If your code isn't alive, it's dead, Jim - be an active maintainer.

       But nobody forces you to use those extra features in modules meant
       for older versions of perl - common::sense of course works there as
       well. There is also an important other mode where having additional
       features by default is useful: commandline hacks and internal use
       scripts: See "much reduced typing", below.

       There is one notable exception: "unicode_eval" is not enabled by
       default. In our opinion, "use feature" had one main effect - newer
       perl versions don't value backwards compatibility and the ability to
       write modules for multiple perl versions much, after all, you can
       use feature.

       "unicode_eval" doesn't add a new feature, it breaks an existing
       function.

   no warnings, but a lot of new errors
       Ah, the dreaded warnings. Even worse, the horribly dreaded "-w"
       switch: Even though we don't care if other people use warnings (and
       certainly there are useful ones), a lot of warnings simply go
       against the spirit of Perl.

       Most prominently, the warnings related to "undef". There is nothing
       wrong with "undef": it has well-defined semantics, it is useful, and
       spitting out warnings you never asked for is just evil.

       The result was that every one of our modules did "no warnings" in
       the past, to avoid somebody accidentally using and forcing his bad
       standards on our code. Of course, this switched off all warnings,
       even the useful ones. Not a good situation. Really, the "-w" switch
       should only enable warnings for the main program only.

       Funnily enough, perllexwarn explicitly mentions "-w" (and not in a
       favourable way, calling it outright "wrong"), but standard
       utilities, such as prove, or MakeMaker when running "make test",
       still enable them blindly.

       For version 2 of common::sense, we finally sat down a few hours and
       went through *every single warning message*, identifying - according
       to common sense - all the useful ones.

       This resulted in the rather impressive list in the SYNOPSIS. When we
       weren't sure, we didn't include the warning, so the list might grow
       in the future (we might have made a mistake, too, so the list might
       shrink as well).

       Note the presence of "FATAL" in the list: we do not think that the
       conditions caught by these warnings are worthy of a warning, we
       *insist* that they are worthy of *stopping* your program,
       *instantly*. They are *bugs*!

       Therefore we consider "common::sense" to be much stricter than "use
       warnings", which is good if you are into strict things (we are not,
       actually, but these things tend to be subjective).

       After deciding on the list, we ran the module against all of our
       code that uses "common::sense" (that is almost all of our code), and
       found only one occurrence where one of them caused a problem: one of
       elmex's (unreleased) modules contained:

          $fmt =~ s/([^\s\[]*)\[( [^\]]* )\]/\x0$1\x1$2\x0/xgo;

       We quickly agreed that indeed the code should be changed, even
       though it happened to do the right thing when the warning was
       switched off.

   much reduced typing
       Especially with version 2.0 of common::sense, the amount of
       boilerplate code you need to add to get *this* policy is daunting.
       Nobody would write this out in throwaway scripts, commandline hacks
       or in quick internal-use scripts.

       By using common::sense you get a defined set of policies (ours, but
       maybe yours, too, if you accept them), and they are easy to apply to
       your scripts: typing "use common::sense;" is even shorter than "use
       warnings; use strict; use feature ...".

       And you can immediately use the features of your installed perl,
       which is more difficult in code you release, but not usually an
       issue for internal-use code (downgrades of your production perl
       should be rare, right?).

   mucho reduced memory usage
       Just using all those pragmas mentioned in the SYNOPSIS together
       wastes <blink>*776 kilobytes*</blink> of precious memory in my perl,
       for *every single perl process using our code*, which on our
       machines, is a lot. In comparison, this module only uses *four*
       kilobytes (I even had to write it out so it looks like more) of
       memory on the same platform.

       The money/time/effort/electricity invested in these gigabytes
       (probably petabytes globally!) of wasted memory could easily save 42
       trees, and a kitten!

       Unfortunately, until everybody applies more common sense, there will
       still often be modules that pull in the monster pragmas. But one can
       hope...

THERE IS NO 'no common::sense'!!!! !!!! !!
   This module doesn't offer an unimport. First of all, it wastes even more
   memory, second, and more importantly, who with even a bit of common
   sense would want no common sense?

STABILITY AND FUTURE VERSIONS
   Future versions might change just about everything in this module. We
   might test our modules and upload new ones working with newer versions
   of this module, and leave you standing in the rain because we didn't
   tell you. In fact, we did so when switching from 1.0 to 2.0, which
   enabled gobs of warnings, and made them FATAL on top.

   Maybe we will load some nifty modules that try to emulate "say" or so
   with perls older than 5.10 (this module, of course, should work with
   older perl versions - supporting 5.8 for example is just common sense at
   this time. Maybe not in the future, but of course you can trust our
   common sense to be consistent with, uhm, our opinion).

WHAT OTHER PEOPLE HAD TO SAY ABOUT THIS MODULE
   apeiron

      "... wow"
      "I hope common::sense is a joke."

   crab

      "i wonder how it would be if joerg schilling wrote perl modules."

   Adam Kennedy

      "Very interesting, efficient, and potentially something I'd use all the time."
      [...]
      "So no common::sense for me, alas."

   H.Merijn Brand

      "Just one more reason to drop JSON::XS from my distribution list"

   Pista Palo

      "Something in short supply these days..."

   Steffen Schwigon

      "This module is quite for sure *not* just a repetition of all the other
      'use strict, use warnings'-approaches, and it's also not the opposite.
      [...] And for its chosen middle-way it's also not the worst name ever.
      And everything is documented."

   BKB

      "[Deleted - thanks to Steffen Schwigon for pointing out this review was
      in error.]"

   Somni

      "the arrogance of the guy"
      "I swear he tacked somenoe else's name onto the module
      just so he could use the royal 'we' in the documentation"

   Anonymous Monk

      "You just gotta love this thing, its got META.json!!!"

   dngor

      "Heh.  '"<elmex at ta-sa.org>"'  The quotes are semantic
      distancing from that e-mail address."

   Jerad Pierce

      "Awful name (not a proper pragma), and the SYNOPSIS doesn't tell you
      anything either. Nor is it clear what features have to do with "common
      sense" or discipline."

   acme

      "THERE IS NO 'no common::sense'!!!! !!!! !!"

   apeiron (meta-comment about us commenting^Wquoting his comment)

      "How about quoting this: get a clue, you fucktarded amoeba."

   quanth

      "common sense is beautiful, json::xs is fast, Anyevent, EV are fast and
      furious. I love mlehmannware ;)"

   apeiron

      "... it's mlehmann's view of what common sense is. His view of common
      sense is certainly uncommon, insofar as anyone with a clue disagrees
      with him."

   apeiron (another meta-comment)

      "apeiron wonders if his little informant is here to steal more quotes"

   ew73

      "... I never got past the SYNOPSIS before calling it shit."
      [...]
      How come no one ever quotes me. :("

   chip (not willing to explain his cryptic questions about links in
   Changes files)

      "I'm willing to ask the question I've asked. I'm not willing to go
      through the whole dance you apparently have choreographed. Either
      answer the completely obvious question, or tell me to fuck off again."

FREQUENTLY ASKED QUESTIONS
   Or frequently-come-up confusions.

   Is this module meant to be serious?
       Yes, we would have put it under the "Acme::" namespace otherwise.

   But the manpage is written in a funny/stupid/... way?
       This was meant to make it clear that our common sense is a
       subjective thing and other people can use their own notions, taking
       the steam out of anybody who might be offended (as some people are
       always offended no matter what you do).

       This was a failure.

       But we hope the manpage still is somewhat entertaining even though
       it explains boring rationale.

   Why do you impose your conventions on my code?
       For some reason people keep thinking that "common::sense" imposes
       process-wide limits, even though the SYNOPSIS makes it clear that it
       works like other similar modules - i.e. only within the scope that
       "use"s them.

       So, no, we don't - nobody is forced to use this module, and using a
       module that relies on common::sense does not impose anything on you.

   Why do you think only your notion of common::sense is valid?
       Well, we don't, and have clearly written this in the documentation
       to every single release. We were just faster than anybody else
       w.r.t. to grabbing the namespace.

   But everybody knows that you have to use strict and use warnings, why do
   you disable them?
       Well, we don't do this either - we selectively disagree with the
       usefulness of some warnings over others. This module is aimed at
       experienced Perl programmers, not people migrating from other
       languages who might be surprised about stuff such as "undef". On the
       other hand, this does not exclude the usefulness of this module for
       total newbies, due to its strictness in enforcing policy, while at
       the same time not limiting the expressive power of perl.

       This module is considerably *more* strict than the canonical "use
       strict; use warnings", as it makes all its warnings fatal in nature,
       so you can not get away with as many things as with the canonical
       approach.

       This was not implemented in version 1.0 because of the daunting
       number of warning categories and the difficulty in getting exactly
       the set of warnings you wish (i.e. look at the SYNOPSIS in how
       complicated it is to get a specific set of warnings - it is not
       reasonable to put this into every module, the maintenance effort
       would be enormous).

   But many modules "use strict" or "use warnings", so the memory savings
   do not apply?
       I suddenly feel sad...

       But yes, that's true. Fortunately "common::sense" still uses only a
       miniscule amount of RAM.

   But it adds another dependency to your modules!
       It's a fact, yeah. But it's trivial to install, most popular modules
       have many more dependencies. And we consider dependencies a good
       thing - it leads to better APIs, more thought about interworking of
       modules and so on.

   Why do you use JSON and not YAML for your META.yml?
       This is not true - YAML supports a large subset of JSON, and this
       subset is what META.yml is written in, so it would be correct to say
       "the META.yml is written in a common subset of YAML and JSON".

       The META.yml follows the YAML, JSON and META.yml specifications, and
       is correctly parsed by CPAN, so if you have trouble with it, the
       problem is likely on your side.

   But! But!
       Yeah, we know.

AUTHOR
    Marc Lehmann <[email protected]>
    http://home.schmorp.de/

    Robin Redeker, "<elmex at ta-sa.org>".