DBD::Solid -- DBD module interfacing the SOLID database.

DBD::Solid -- DBD module interfacing the SOLID database.

Copyright (c) 1997, 1998 Thomas K. Wenrich
portions Copyright (c) 1994,1995,1996 Tim Bunce
very small portions Copyright (c) 2000,2001 Joe Slagel & Max Struma

You may distribute under the terms of either the GNU General Public
License or the Artistic License, as specified in the Perl README file.

PLEASE READ THE ENTIRE README FILE CAREFULLY !

* WARNING: THIS IS MOSTLY ALPHA SOFTWARE. Your mileage may vary. *

* Most of the code (and some parts of this README) were stolen from the
* DBD-Oracle distribution.
* However, any bugs and errors herein are most likely my fault, not
* those of Tim Bunce.

IMPORTANT NOTICE:
This is a new DBD-Solid for Solid 3.5. To all changes that I've made I've
appended my initials (mms) so that all blame may be laid before the appropriate
feet and so that a search for the string 'mms' will take one directly to the
modifications I've found necessary to support solid 3.5. Questions/problems
can be directed to [email protected] (or possibly to [email protected]).

Also, note that this version of DBD-Solid supports only Solid 3.52. If you wish
to modify it for use with 3.51, READ the notes for the function dbd_st_fetch in
dbdimp.c.

Lastly, support for platforms other than Linux/Solaris has been removed, until
we can get some time to put it back in correctly. Your welcome to try to build
on other platforms...your mileage may vary. Please forward on any patches.

*BEFORE* BUILDING, TESTING AND INSTALLING this you will need to:

Build, test and install Perl 5 (at least 5.005).
It is very important to TEST it and INSTALL it!

Build, test and install the DBI module.
It is very important to TEST it and INSTALL it!

Remember to *read* the DBI README file!

Install the SOLID 3.52 RDBMS software.

Makefile.PL searches those files below the directory pointed to by the
SOLIDDIR environment

BUILDING:
On UNIX:

SOLIDDIR=myhome/solid; perl Makefile.PL
make

Just in case the dynloaded DBD::Solid doesn't behave like expected
(I still don't feel real good about loading binaries made without -fpic
dynamically, although there was no error report at all about this issue),
you may want to build a static binary (either remove the link you created
so Makefile.PL doesn't find a libxxxxxx.a and make, make test as usual
OR run `perl Makefile.PL LINKTYPE=static' and make, make test).

When you build static, don't forget that all the DBD::Solid code
lives inside the perl binary created during 'make test'. You will
need to copy the new perl binary somewhere in /usr/bin or simply
do what you are told during 'make':
make -f makefile.aperl install_perl

If you have problems see the 'IF YOU HAVE PROBLEMS' section below
and the "OPERATING SYSTEM NOTES" section at the end of this file.

If it builds without error you can then run the tests. For the
main test to work it must be able to connect to a SOLID database.

Don't worry about most warnings, specifically "end-of-loop code not
reached", "ANSI C forbids braced-groups within expressions", "cast
increases required alignment of target type".

Also, don't worry about 'SQL_NO_DATA_FOUND' redefined warnings. That's
a clash between DBI and Solid's ODBC, and it doesn't affect anything. --mms

TESTING

The tests kinda work with the 'new style' environment variables
DBI_DSN, DBI_USER, DBI_PASS introduced with DBI 0.86.
See the DBI documentation for details.

'new style' examples:
setenv SOLID_HOME /usr/local/soliddb
setenv SOLID_DSN "tcp localhost 1313"
setenv DBI_USER dba
setenv DBI_PASS dba

The supplied test will connect to the database using the value of the
DBI_USER environment variable so you should set that to the correct
value before starting the test. Don't forget to CREATE the user (see
SOLID Server documentation) when you aren't using an existing
database user.

When you want to use a remote SOLID server or have more than one
SOLID Server running then you must set the SOLID_DSN environment
variable to connect to the database.

UNIX (bourne shell) example:
prompt> SOLID_USER="perltest perltest"
prompt> SOLID_DSN="TCP/IP myhost.mydomain 1313"
prompt> export SOLID_USER SOLID_DSN

Test your settings by connecting to the database using the solsql
tool supplied with SOLID:

prompt> solsql $SOLID_DSN $DBI_USER $DBI_PASS

This should connect you to the SOLID server. Once you can do
that then you can test DBD::Solid knowing that it should work.

make test
make test TEST_VERBOSE=1 (if any of the t/* tests fail)

make install (if the tests look okay)

TEST NOTES:
1. Most of the test scripts use a common subroutine (in
t/testenv.pm) to obtain information about the database
connection. To start the tests _without_ running 'make', you
may either imitate the way a 'make test' calls t/*.t (e.g.
perl t/02base.t) or modify the scripts so that testenv()
is not longer used or within the scripts.
2. The tests aren't self contained; instead, they rely on the
existance of tables created while running t/02base.t.
Because these test tables are removed by t/99drop.t,
they must be recreated by running t/02base.t before
trying one of the later test scripts.

IF YOU HAVE PROBLEMS:

Do not hand edit the generated Makefile unless you are completely sure
you understand the implications! Always try to make changes via the
Makefile.PL command line and/or editing the Makefile.PL.

You should not need to make any changes. If you do *please* let me
know so that I can try to make it automatic in a later release.

Please don't post problems to comp.lang.perl.misc or perl5-porters.
This software is supported via the dbi-users mailing list. For more
information and to keep informed about progress you can join the a
mailing list via http:www.fugue.com/dbi (if you are unable to use the
web you can subscribe by sending a message to [email protected], it
may take a few days to be processed).

Please post details of any problems (or changes you needed to make) to
[email protected] and CC them now to [email protected]. But note...

** IT IS IMPORTANT TO INCLUDE THE FOLLOWING INFORMATION:

1. A complete log of a all steps of the build, e.g.:

perl Makefile.PL (do a make realclean first)
make
make test
make test TEST_VERBOSE=1 (if any tests fail)

2. Full details of which software you are using:

* Version of the operating system
(on Linux: Kernel and library versions)
* Solid versions (of server and development system)
* Perl version (the output of perl -V)

It is important to check that you are using the latest version before
posting. If you're not then I'm *very* likely to simply say "upgrade to
the latest". You would do yourself a favour by upgrading beforehand.

===============================================================================
OPERATING SYSTEM NOTES:

It's quite possible that Makefile.PL misses something for the
special system/perl/solid version combination you use. The
most common problems are:

Linker problems:
(1) The linker barfs at you, saying something about 'unresolved
symbols'.
Try to compile and link the examples coming with the
client library from Solid.
When you can't manage to build Solid's examples, Solid tech
support should be able to help you.
When Solid's examples are working fine, you may try to
modify Makefile.pl, adding the libraries/switches/defines
you found while building the examples.

(2) Perl's Dynloader tells you it "Can't load .../Solid.so",
followed [possible] by messages about unresolved symbols
called 'SQLAllocEnv' and other 'SQLxxxx' symbols.
This is also a linker problem. You may try to build a
static perl binary; if this also fails, try (1).

SOLID NOTES:

===============================================================================
Examples and other info:

All the tests in the t/ subdirectory ARE examples of DBI usage.

SOLID 'home page': http://www.solidtech.com

DBI 'home page': http://www.hermetica.com/technologia/DBI

End.