NAME
SNMP::Effective - An effective SNMP-information-gathering module
VERSION
1.10
SYNOPSIS
use SNMP::Effective;
my $snmp = SNMP::Effective->new(
max_sessions => $NUM_POLLERS,
master_timeout => $TIMEOUT_SECONDS,
);
$snmp->add(
dest_host => $ip,
callback => sub { store_data() },
get => [ '1.3.6.1.2.1.1.3.0', 'sysDescr' ],
);
# lather, rinse, repeat
# retrieve data from all hosts
$snmp->execute;
DESCRIPTION
This module collects information, over SNMP, from many hosts and many
OIDs, really fast.
It is a wrapper around the facilities of "SNMP.pm", which is the Perl
interface to the C libraries in the "SNMP" package. Advantages of using
this module include:
Simple configuration
The data structures required by "SNMP" are complex to set up before
polling, and parse for results afterwards. This module provides a
simpler interface to that configuration by accepting just a list of
SNMP OIDs or leaf names.
Parallel execution
Many users are not aware that "SNMP" can poll devices asynchronously
using a callback system. By specifying your callback routine as in
the "SYNOPSIS" section above, many network devices can be polled in
parallel, making operations far quicker. Note that this does not use
threads.
It's fast
To give one example, "SNMP::Effective" can walk, say, eight indexed
OIDs (port status, errors, traffic, etc) for around 300 devices
(that's 8500 ports) in under 30 seconds. Storage of that data might
take an additional 10 seconds (depending on whether it's to RAM or
disk). This makes polling/monitoring your network every five minutes
(or less) no problem at all.
The interface to this module is simple, with few options. The sections
below detail everything you need to know.
METHODS ARGUMENTS
The method arguments are very flexible. Any of the below acts as the
same:
$obj->method(MyKey => $value);
$obj->method(my_key => $value);
$obj->method(My_Key => $value);
$obj->method(mYK__EY => $value);
ATTRIBUTES
master_timeout
Get/Set the master timeout
max_sessions
Get/Set the number of max session
hostlist
Returns a list containing all the hosts.
arg
Returns a hash with the default args
callback
Returns a ref to the default callback sub-routine.
heap
Returns a value for the default heap.
METHODS
new
This is the object constructor, and returns a SNMP::Effective object.
Arguments
"max_sessions"
Maximum number of simultaneous SNMP sessions.
"master_timeout"
Maximum number of seconds before killing execute.
All other arguments are passed on to $snmp_effective->add( ... ).
"add"
Adding information about what SNMP data to get and where to get it.
Arguments
dest_host
Either a single host, or an array-ref that holds a list of hosts.
The format is whatever SNMP can handle.
"arg"
A hash-ref of options, passed on to SNMP::Session.
"callback"
A reference to a sub which is called after each time a request is
finished.
"heap"
This can hold anything you want. By default it's an empty hash-ref.
"get" / "getnext" / "walk"
Either "oid object", "numeric oid", "SNMP::Varbind SNMP::VarList" or
an array-ref containing any combination of the above.
"set"
Either a single SNMP::Varbind or a SNMP::VarList or an array-ref of
any of the above.
This can be called with many different combinations, such as:
"dest_host" / any other argument
This will make changes per dest_host specified. You can use this to
change arg, callback or add OIDs on a per-host basis.
"get" / "getnext" / "walk" / "set"
The OID list submitted to "add" will be added to all dest_host, if
no dest_host is specified.
"arg" / "callback"
This can be used to alter all hosts' SNMP arguments or callback
method.
execute
This method starts setting and/or getting data. It will run as long as
necessary, or until "master_timeout" seconds has passed. Every time some
data is set and/or retrieved, it will call the callback-method, as
defined globally or per host.
FUNCTIONS
"match_oid"
Takes two arguments: One OID to match against, and the OID to match.
match_oid("1.3.6.10", "1.3.6"); # return 10
match_oid("1.3.6.10.1", "1.3.6"); # return 10.1
match_oid("1.3.6.10", "1.3.6.11"); # return undef
"make_numeric_oid"
Inverse of make_numeric_oid: Takes a list of mib-object strings, and
turns them into numeric format.
make_numeric_oid("sysDescr"); # return .1.3.6.1.2.1.1.1
"make_name_oid"
Takes a list of numeric OIDs and turns them into an mib-object string.
make_name_oid("1.3.6.1.2.1.1.1"); # return sysDescr
THE CALLBACK METHOD
When "SNMP" is done collecting data from a host, it calls a callback
method, provided by the "Callback => sub{}" argument. Here is an example
of a callback method:
sub my_callback {
my($host, $error) = @_
if($error) {
warn "$host failed with this error: $error"
return;
}
my $data = $host->data;
for my $oid (keys %$data) {
print "$host returned oid $oid with this data:\n";
print join "\n\t",
map { "$_ => $data->{$oid}{$_}" }
keys %{ $data->{$oid}{$_} };
print "\n";
}
}
DEBUGGING
Debugging is enabled through setting the environment variable
SNMP_EFFECTIVE_DEBUG=1 perl myscript.pl
It will print the debug information to STDERR.
NOTES
"walk"
SNMP::Effective doesn't really do a SNMP native "walk". It makes a
series of "getnext", which is almost the same as SNMP's walk.
"set"
If you want to use SNMP SET, you have to build your own varbind:
$varbind = SNMP::VarBind($oid, $iid, $value, $type);
$effective->add( set => $varbind );
AUTHOR
Jan Henning Thorsen, "<pm at flodhest.net>"
BUGS
Please report any bugs or feature requests to "bug-snmp-effective at
rt.cpan.org", or through the web interface at
<
http://rt.cpan.org/NoAuth/ReportBug.html?Queue=SNMP-Effective>. I will
be notified, and then you'll automatically be notified of progress on
your bug as I make changes.
ACKNOWLEDGEMENTS
Various contributions by Oliver Gorwits.
Sigurd Weisteen Larsen contributed with a better locking mechanism.
COPYRIGHT & LICENSE
Copyright 2007 Jan Henning Thorsen, all rights reserved.
This program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
