NAME
Hijk - Fast & minimal low-level HTTP client
SYNOPSIS
A simple GET request:
use Hijk ();
my $res = Hijk::request({
method => "GET",
host => "example.com",
port => "80",
path => "/flower",
query_string => "color=red"
});
if (exists $res->{error} and $res->{error} & Hijk::Error::TIMEOUT) {
die "Oh noes we had some sort of timeout";
}
die "Expecting an 'OK' response" unless $res->{status} == 200;
say $res->{body};
A POST request, you have to manually set the appropriate headers, URI
escape your values etc.
use Hijk ();
use URI::Escape qw(uri_escape);
my $res = Hijk::request({
method => "POST",
host => "example.com",
port => "80",
path => "/new",
head => [ "Content-Type" => "application/x-www-form-urlencoded" ],
query_string => "type=flower&bucket=the%20one%20out%20back",
body => "description=" . uri_escape("Another flower, let's hope it's exciting"),
});
die "Expecting an 'OK' response" unless $res->{status} == 200;
DESCRIPTION
Hijk is a fast & minimal low-level HTTP client intended to be used
where you control both the client and the server, e.g. for talking to
some internal service from a frontend user-facing web application.
It is NOT a general HTTP user agent, it doesn't support redirects,
proxies, SSL and any number of other advanced HTTP features like (in
roughly descending order of feature completeness) LWP::UserAgent,
WWW::Curl, HTTP::Tiny, HTTP::Lite or Furl. This library is basically
one step above manually talking HTTP over sockets.
Having said that it's lightning fast and extensively used in production
at Booking.com <
https://www.booking.com> where it's used as the go-to
transport layer for talking to internal services. It uses non-blocking
sockets and correctly handles all combinations of connect/read timeouts
and other issues you might encounter from various combinations of parts
of your system going down or becoming otherwise unavailable.
FUNCTION: Hijk::request( $args :HashRef ) :HashRef
Hijk::request is the only function you should use. It (or anything else
in this package for that matter) is not exported, so you have to use
the fully qualified name.
It takes a HashRef of arguments and either dies or returns a HashRef as
a response.
The HashRef argument to it must contain some of the key-value pairs
from the following list. The value for host and port are mandatory, but
others are optional with default values listed below.
protocol => "HTTP/1.1", # (or "HTTP/1.0")
host => ...,
port => ...,
connect_timeout => undef,
read_timeout => undef,
read_length => 10240,
method => "GET",
path => "/",
query_string => "",
head => [],
body => "",
socket_cache => \%Hijk::SOCKET_CACHE, # (undef to disable, or \my %your_socket_cache)
on_connect => undef, # (or sub { ... })
parse_chunked => 0,
head_as_array => 0,
no_default_host_header => 1,
Notice how Hijk does not take a full URI string as input, you have to
specify the individual parts of the URL. Users who need to parse an
existing URI string to produce a request should use the URI module to
do so.
The value of head is an ArrayRef of key-value pairs instead of a
HashRef, this way you can decide in which order the headers are sent,
and you can send the same header name multiple times. For example:
head => [
"Content-Type" => "application/json",
"X-Requested-With" => "Hijk",
]
Will produce these request headers:
Content-Type: application/json
X-Requested-With: Hijk
In addition Hijk will provide a Host header for you by default with the
host value you pass to request(). To suppress this (e.g. to send custom
Host requests) pass a true value to the no_default_host_header option
and provide your own Host header in the head ArrayRef (or don't, if you
want to construct a Host-less request knock yourself out...).
Hijk doesn't escape any values for you, it just passes them through
as-is. You can easily produce invalid requests if e.g. any of these
strings contain a newline, or aren't otherwise properly escaped.
The value of connect_timeout or read_timeout is in floating point
seconds, and is used as the time limit for connecting to the host, and
reading the response back from it, respectively. The default value for
both is undef, meaning no timeout limit. If you don't supply these
timeouts and the host really is unreachable or slow, we'll reach the
TCP timeout limit before returning some other error to you.
The default protocol is HTTP/1.1, but you can also specify HTTP/1.0.
The advantage of using HTTP/1.1 is support for keep-alive, which
matters a lot in environments where the connection setup represents
non-trivial overhead. Sometimes that overhead is negligible (e.g. on
Linux talking to an nginx on the local network), and keeping open
connections down and reducing complexity is more important, in those
cases you can either use HTTP/1.0, or specify Connection: close in the
request, but just using HTTP/1.0 is an easy way to accomplish the same
thing.
By default we will provide a socket_cache for you which is a global
singleton that we maintain keyed on join($;, $$, $host, $port).
Alternatively you can pass in socket_cache hash of your own which we'll
use as the cache. To completely disable the cache pass in undef.
The optional on_connect callback is intended to be used for you to
figure out from production traffic what you should set the
connect_timeout. I.e. you can start a timer when you call
Hijk::request() that you end when on_connect is called, that's how long
it took us to get a connection. If you start another timer in that
callback that you end when Hijk::request() returns to you that'll give
you how long it took to send/receive data after we constructed the
socket, i.e. it'll help you to tweak your read_timeout. The on_connect
callback is provided with no arguments, and is called in void context.
We have experimental support for parsing chunked responses encoding.
historically Hijk didn't support this at all and if you wanted to use
it with e.g. nginx you had to add chunked_transfer_encoding off to the
nginx config file.
Since you may just want to do that instead of having Hijk do more work
to parse this out with a more complex and experimental codepath you
have to explicitly enable it with parse_chunked. Otherwise Hijk will
die when it encounters chunked responses. The parse_chunked option may
be turned on by default in the future.
The return value is a HashRef representing a response. It contains the
following key-value pairs.
proto => :Str
status => :StatusCode
body => :Str
head => :HashRef (or :ArrayRef with "head_as_array")
error => :PositiveInt
error_message => :Str
errno_number => :Int
errno_string => :Str
For example, to send a request to
http://example.com/flower?color=red,
pass the following parameters:
my $res = Hijk::request({
host => "example.com",
port => "80",
path => "/flower",
query_string => "color=red"
});
die "Response is not 'OK'" unless $res->{status} == 200;
Notice that you do not need to put the leading "?" character in the
query_string. You do, however, need to properly uri_escape the content
of query_string.
Again, Hijk doesn't escape any values for you, so these values MUST be
properly escaped before being passed in, unless you want to issue
invalid requests.
By default the head in the response is a HashRef rather then an
ArrayRef. This makes it easier to retrieve specific header fields, but
it means that we'll clobber any duplicated header names with the most
recently seen header value. To get the returned headers as an ArrayRef
instead specify head_as_array.
If you want to fiddle with the read_length value it controls how much
we POSIX::read($fd, $buf, $read_length) at a time.
We currently don't support servers returning a http body without an
accompanying Content-Length header; bodies MUST have a Content-Length
or we won't pick them up.
ERROR CODES
If we had a recoverable error we'll include an "error" key whose value
is a bitfield that you can check against Hijk::Error::* constants.
Those are:
Hijk::Error::CONNECT_TIMEOUT
Hijk::Error::READ_TIMEOUT
Hijk::Error::TIMEOUT
Hijk::Error::CANNOT_RESOLVE
Hijk::Error::REQUEST_SELECT_ERROR
Hijk::Error::REQUEST_WRITE_ERROR
Hijk::Error::REQUEST_ERROR
Hijk::Error::RESPONSE_READ_ERROR
Hijk::Error::RESPONSE_BAD_READ_VALUE
Hijk::Error::RESPONSE_ERROR
In addition we might return error_message, errno_number and
errno_string keys, see the discussion of Hijk::Error::REQUEST_* and
Hijk::Error::RESPONSE_* errors below.
The Hijk::Error::TIMEOUT constant is the same as
Hijk::Error::CONNECT_TIMEOUT | Hijk::Error::READ_TIMEOUT. It's there
for convenience so you can do:
.. if exists $res->{error} and $res->{error} & Hijk::Error::TIMEOUT;
Instead of the more verbose:
.. if exists $res->{error} and $res->{error} & (Hijk::Error::CONNECT_TIMEOUT | Hijk::Error::READ_TIMEOUT)
We'll return Hijk::Error::CANNOT_RESOLVE if we can't gethostbyname()
the host you've provided.
If we fail to do a select() or write() during when sending the response
we'll return Hijk::Error::REQUEST_SELECT_ERROR or
Hijk::Error::REQUEST_WRITE_ERROR, respectively. Similarly to
Hijk::Error::TIMEOUT the Hijk::Error::REQUEST_ERROR constant is a union
of these two, and any other request errors we might add in the future.
When we're getting the response back we'll return
Hijk::Error::RESPONSE_READ_ERROR when we can't read() the response, and
Hijk::Error::RESPONSE_BAD_READ_VALUE when the value we got from read()
is 0. The Hijk::Error::RESPONSE_ERROR constant is a union of these two
and any other response errors we might add in the future.
Some of these Hijk::Error::REQUEST_* and Hijk::Error::RESPONSE_* errors
are re-thrown errors from system calls. In that case we'll also pass
along error_message which is a short human readable error message about
the error, as well as errno_number & errno_string, which are $!+0 and
"$!" at the time we had the error.
Hijk might encounter other errors during the course of the request and
WILL call die if that happens, so if you don't want your program to
stop when a request like that fails wrap it in eval.
Having said that the point of the Hijk::Error::* interface is that all
errors that happen during normal operation, i.e. making valid requests
against servers where you can have issues like timeouts, network blips
or the server thread on the other end being suddenly kill -9'd should
be caught, categorized and returned in a structural way by Hijk.
We're not currently aware of any issues that occur in such normal
operations that aren't classified as a Hijk::Error::*, and if we find
new issues that fit the criteria above we'll likely just make a new
Hijk::Error::* for it.
We're just not trying to guarantee that the library can never die, and
aren't trying to catch truly exceptional issues like e.g. fcntl()
failing on a valid socket.
AUTHORS
Kang-min Liu <
[email protected]>
Ãvar Arnfjörð Bjarmason <
[email protected]>
Borislav Nikolov <
[email protected]>
Damian Gryski <
[email protected]>
COPYRIGHT
Copyright (c) 2013- Kang-min Liu <
[email protected]>.
LICENCE
The MIT License
DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH
YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
NECESSARY SERVICING, REPAIR, OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE
TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
