NAME
SSH::Batch - Cluster operations based on parallel SSH, set and interval
arithmetic
VERSION
This document describes SSH::Batch 0.029 released on 29 April 2012.
SYNOPSIS
The following scripts are provided:
fornodes
Expand patterns to machine host list.
$ cat > ~/.fornodesrc
ps=blah.ps.com bloo.ps.com boo[2-25,32,41-70].ps.com
as=ws[1101-1105].as.com
# use set operations to define new sets:
foo={ps} + {ps} * {as} - {ps} / {as}
bar = foo.com bar.org \
bah.cn \
baz.com
^D
$ fornodes 'api[02-10].foo.bar.com' 'boo*.ps.com'
$ fornodes 'tq[ab-ac].[1101-1105].foo.com'
$ fornodes '{ps} + {as} - ws1104.as.com' # set union and subtraction
$ fornodes '{ps} * {as}' # set intersect
atnodes
Run command on clusters. (atnodes calls fornodes internally.)
# run a command on the specified servers:
$ atnodes $'ps -fe|grep httpd' 'ws[1101-1105].as.com'
# multiple-arg command requires "--":
$ atnodes ls /opt/ -- '{ps} + {as}' 'localhost'
# or use single arg command:
$ atnodes 'ls /opt/' '{ps} + {as}' 'localhost' # ditto
# specify a different user name and SSH server port:
$ atnodes hostname '{ps}' -u agentz -p 12345
# use -w to prompt for password if w/o SSH key (no echo back)
$ atnodes hostname '{ps}' -u agentz -w
# or prompt for password if sudo required...
$ atnodes 'sudo apachectl restart' '{ps}' -w
# run sudo command if tty required...
$ atnodes -tty 'sudo apachectl restart' '{ps}'
# or specify a timeout:
$ atnodes 'ping foo.com' '{ps}' -t 3
tonodes
Upload local files/directories to remote clusters
$ tonodes /tmp/*.inst -- '{as}:/tmp/'
$ tonodes foo.txt 'ws1105*' :/tmp/bar.txt
# use rsync instead of scp:
$ tonodes foo.txt 'ws1105*' :/tmp/bar.txt -rsync
$ tonodes -r /opt /bin/* -- 'ws[1101-1102].foo.com' 'bar.com' :/foo/bar/
key2nodes
Push the SSH public key (or generate one if not any) to the remote
clusters.
$ key2nodes 'ws[1101-1105].as.com'
DESCRIPTION
System administration (sysadmin) is also part of my $work. Playing with
a (big) bunch of machines without a handy tool is painful. So I
refactored some of our old scripts and hence this module.
This is a high-level abstraction over the powerful Net::OpenSSH module.
A bunch of handy scripts are provided to simplify big cluster
operations: fornodes, atnodes, tonodes, and key2nodes.
"SSH::Batch" allows you to name your clusters using variables and
interval/set syntax in your ~/.fornodesrc config file (or a different
file name specified by the "SSH_BATCH_RC" environment). For instance:
$ cat ~/.fornodesrc
A=foo[01-03].com bar.org
B=bar.org baz[a-b,d,e-g].cn foo02.com
C={A} * {B}
D={A} - {B}
where cluster "C" is the intersection set of cluster "A" and "B" while
"D" is the sef of machines that are in "A" but not in "B".
And then you can query machine host list by using "SSH::Batch"'s
fornodes script:
$ fornodes '{C}'
bar.org foo02.com
$ fornodes '{D}'
foo01.com foo03.com
$ fornodes blah.com '{C} + {D}'
bar.org blah.com foo01.com foo02.com foo03.com
It's always best practice to put spaces around set operators like "+",
"-", "*", and "/", so as to allow these characters (notably the dash
"-") in your host names, as in:
$ fornodes 'foo-bar-[a-d].com - foo-bar-c.com'
foo-bar-a.com foo-bar-b.com foo-bar-d.com
for the ranges like "[a-z]", there's also an alternative syntax:
[a..z]
To exclude some discrete values from certain range, you need set
subtration:
foo[1-100].com - foo[32,56].com
or equivalently
foo[1-31,33-55,57-100].com
fornodes could be very handy in shell programming. For example, to test
the 80 port HTTP service of a cluster "A", simply put
$ for node in `fornodes '{A}'`; \
do curl "http://$node:80/blah'; \
done
Also, other scripts in this module, like atnodes, tonodes, and key2nodes
also call fornodes internally so that you can use the cluster spec
syntax in those scripts' command line as well.
atnodes meets the common requirement of running a command on a remote
cluster. For example:
# at the concurrency level of 6:
atnodes 'ls -lh' '{A} + {B}' my.more.com -c 6
Or upload a local file to the remote cluster:
tonodes ~/my.tar.gz '{A} / {B}' :/tmp/
or multiple files as well as some directories:
tonodes -r ~/mydir ~/mydir2/*.so -- foo.com bar.cn :~/
It's also possible to use wildcards in the cluster spec expression, as
in
atnodes 'ls ~' 'api??.*.com'
where atnodes will match the pattern "api??.*.com" against the
"universal set" consisting of those hosts appeared in ~/fornodesrc and
those host names apeared before this pattern on the command line (if
any). Note that only "?" (match any character) and "*" (match 0 or more
characters) are supported here.
There's also a key2nodes script to push SSH public keys to remote
machines ;)
TIPS
There's some extra tips found in our own's everyday use:
Running sudo commands
Often, we want to run commands requiring root access, such as when
installing software packages on remote machines. So you'll have to
tell atnodes to prompt for your password:
$ atnodes 'sudo yum install blah' '{my_cluster}' -w
Then you'll be prompted by the "Password:" prompt after which you
enter your remote password (with echo back turned off).
Because the remote sshd might be smart enough to "remember" the sudo
password for a (small) amount of time, immediate subsequent "sudo"
might omit the "-w" option, as in
$ atnodes 'sudo mv ~/foo /usr/local/bin/' {my_cluster}
But remember, you can use *sudo without passwords* just for a
*small* amount of time ;)
If you see the following error message while doing sudo with atnodes
sudo: sorry, you must have a tty to run sudo
then you should add option -tty, or you can probably comment out the
"Defaults requiretty" line in your server's /etc/sudoers file (best
just to do this for your own account).
Passing custom options to the underlying "ssh"
By default, "atnodes" relies on Net::OpenSSH to locate the OpenSSH
client executable "ssh". But you can define the "SSH_BATCH_SSH_CMD"
environment to specify the command explicitly. You can use the
"-ssh" option to override it further. (The key2nodes script also
supports the "SSH_BATCH_SSH_CMD" environment.)
Note that to specify your own "ssh" is also a way to pass more
options to the underlying OpenSSH client executable when using
"atnodes":
$ cat > ~/bin/myssh
#!/bin/sh
# to enable X11 forwarding:
exec ssh -X "$@"
^D
$ chmod +x ~/bin/myssh
$ export SSH_BATCH_SSH_CMD=~/bin/myssh
$ atnodes 'ls -lh' '{my_cluster_name}'
It's important to use "exec" in your own ssh wrapper script, or you
may see "atnodes" hangs.
This trick also works for the key2nodes script.
Use wildcard for cluster expressions to save typing
Wildcards in cluster spec could save a lot of typing. Say, if you
have "api10.foo.bar.baz.bah.com.cn" appeared in your ~/.fornodesrc
file:
$ cat ~/.fornodesrc
MyCluster=api[01-22].foo.bar.baz.bah.com.cn
then in case you want to refer to the "api10.foo.bar.baz.bah.com.cn"
node alone on the command line, you can just say "api10*", or
"api10.*.com.cn", or something more specific.
But use wildcards with care. You may have nodes that you don't want
in your resulting host list. So it's best practice to use -l option
when you use wildcards with atnodes or tonodes, as in
$ atnodes 'rm -rf /opt/blah' 'api10*' -l
So that atnodes will just echos out the exact host list that it
would operate on but without doing anything. (It's effectively a
"dry-run".) After checking, you can safely remove the "-l" option
and go on.
Specify a different ssh port or user name.
You may have already learned that you can use the "-u" and "-p"
options to specify a non-default user account or SSH port. But it's
also possible and often more convenient to put it as part of your
cluster spec expression, either in ~/.fornodesrc or on the command
line, as in
$ cat > ~/.fornodesrc
# cluster A uses the default user name:
A=foo[01-25].com
# cluster B uses the non-default user name "jim" and a port 12345
B=jim@foo[26-28].com:12345
$ atnodes 'ls -lh' '{B} + bob@bar[29-31].org:5678'
It's also possible to specify a different rc config file than
~/.fornodesrc via the environment variable "SSH_BATCH_RC". For
example,
export SSH_BATCH_RC=/opt/my-fornodes-rc
then the file /opt/my-fornodes-rc will be used instead of the
default ~/.fornodesrc file.
Use "-L" to help grepping the outputs by hostname
When managing hundreds or even thousands of machines, it's often
more convenient to "grep" over the outputs of atnodes or tonodes by
host names. The "-L" option makes atnodes and tonodes to prefixing
every output lines of the remote commands (if any) by the host name.
As in
$ atnodes 'top -b|head -n5' '{my_big_cluster}' -L > out.txt 2>&1
$ grep 'some.specific.host.com' out.txt
Specify a timeout to prevent hanging
It's often wise to specify a timeout for SSH operations. For
example, if there's 3 sec of network traffic silence, the following
command will quit with an error message printed:
$ atnodes -t 3 'sleep 4' {my_cluster}
Limit the bandwith used by tonodes to be firewall-friendly
You can use the "-b" option to tell tonodes to use limited bandwidth
if your intranet's Firewall is paranoid about your bandwidth use:
$ tonodes my_big_file {my_cluster}:/tmp/ -b 8000
where 8000 is in the unit of Kbits/sec, so it will not transfer
faster than 1 MByte/sec.
Avoid logging manually for the first time
When you use key2nodes or atnodes to access remote servers that you
have never logged in manually, you would probably see the following
errors:
===================== foo.com =====================
Failed to spawn command.
ERROR: unable to establish master SSH connection: the authenticity of the target host can't be established, try loging manually first
A work-around is using "ssh" to login to that "foo.com" machine
manually and then try key2nodes or atnodes again.
Another nicer work-around is to pass the "-o
'StrictHostKeyChecking=no'" option to the underlying ssh executable
used by "SSH::Batch". Here's a quick HOW-TO:
$ cat > ~/bin/myssh
#!/bin/sh
# to disable StrictHostKeyChecking
exec ssh -o 'StrictHostKeyChecking=no' "$@"
^D
$ chmod +x ~/bin/myssh
$ export SSH_BATCH_SSH_CMD=~/bin/myssh
# then we try again
$ key2nodes foo.com
$ atnodes 'hostname' foo.com
PREREQUISITES
This module uses Net::OpenSSH behind the scene, so it requires the
OpenSSH *client* executable (usually spelled "ssh") with multiplexing
support (at least OpenSSH 4.1). To check your "ssh" version, use the
command:
$ ssh -v
On my machine, it echos
OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007
usage: ssh [-1246AaCfgKkMNnqsTtVvXxY] [-b bind_address] [-c cipher_spec]
[-D [bind_address:]port] [-e escape_char] [-F configfile]
[-i identity_file] [-L [bind_address:]port:host:hostport]
[-l login_name] [-m mac_spec] [-O ctl_cmd] [-o option] [-p port] [-R [bind_address:]port:host:hostport] [-S ctl_path]
[-w local_tun[:remote_tun]] [user@]hostname [command]
There's no spesial requirement on the server side ssh service. Even a
non-OpenSSH server-side deamon should work as well.
INSTALLATION
perl Makefile.PL
make
make test
sudo make install
Win32 users should replace "make" with "nmake".
CODE REPOSITORY
You can always get the latest "SSH::Batch" source from its public Git
repository:
<
http://github.com/agentzh/sshbatch>
If you have a branch for me to pull, please let me know ;)
TODO
* Cache the parsing and evaluation results of the config file
~/.fornodesrc to somewhere like the fiel ~/.fornodesrc.cached.
* Abstract the duplicate code found in the scripts to a shared .pm
file.
* Add the fromnodes script to help downloading files from the remote
clusters to local file system (maybe grouped by host name).
* Add the betweennodes script to transfer files between clusters
through localhost.
AUTHORS
* Zhang "agentzh" Yichun (章亦春) "<
[email protected]>"
* Liseen Wan (万珣新) "<
[email protected]>"
COPYRIGHT & LICENSE
This module as well as its programs are licensed under the BSD License.
Copyright (c) 2009, Yahoo! China EEEE Works, Alibaba Inc. All rights
reserved.
Copyright (C) 2009, 2010, 2011, Zhang "agentzh" Yichun (章亦春). All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the Yahoo! China EEEE Works, Alibaba Inc. nor
the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SEE ALSO
fornodes, atnodes, tonodes, key2nodes, SSH::Batch::ForNodes,
Net::OpenSSH.
