Subj : Re: USR 5686 no replay at AT command
To   : All
From : Nigel Reed
Date : Wed Aug 21 2024 10:30 pm

On Thu, 22 Aug 2024 00:19:10 -0400
"rmurray" (21:1/235) <[email protected]> wrote:
>  Ni> In order to dial a phone number, you need to use the ATDT
>  Ni> command, so it sounds like it at least responds to that AT
>  Ni> command?
>  Ni>
>  Ni> Nightfox
>
> The modem accepts all commands like ATDT without any issues. However,
> when sending basic commands like AT, ATA, ATE1, or AT&F, which should
> normally respond with an "OK," there's no response at all. Although
> the commands themselves are executed, the expected "OK" response is
> missing. Consequently, SEXY isn't working because it requires
> feedback from commands like AT&F, ATS0=1, or ATS0=0, but since
> there's no response, the issue persists with both modems.
>
> This indicates that the problem likely isn't with the modem itself
> but rather with the computer's configuration, possibly related to
> incorrect DIP switch settings. I've also tried this on Linux with
> both modems, and the same issue occurs.
>
>                 VA2RFC BBS    Les Méchins, Québec  Canada
>                SysOp: rmurray    PhoneNet: 1000040 (Modem)
>   Telnet: va2rfcbbs.photorm.net:23    FsxNet: 21:1/235    FidoNet:
> 1:229/114
>
> --- Mystic BBS v1.12 A48 (Windows/64)
>  * Origin: VA2RFC BBS (21:1/235)
If it's not, try flipping switch 4 into the UP position.
--
End Of The Line BBS - Plano, TX
telnet endofthelinebbs.com 23
--- SBBSecho 3.20-Linux
* Origin: End Of The Line BBS - endofthelinebbs.com (21:2/101)

You are viewing proxied material from freeway.apana.org.au. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.