Subj : Fdsz
To   : Mike Powell
From : Gordon Lewicky
Date : Sat Apr 02 2005 11:24 pm

Quoting Mike Powell to All
Subj. Fdsz, dated 02-Apr-2005 10:11

| -> Are you using fdsz rather than dsz?
MP> |
MP> |  BINGO!!!  That was the problem. File transfers are woking.  Thanks
MP> so | much.
MP> +-[MP=>MP]

MP> In order to run fdsz on a telnet system, with virtulized ports, do you
MP> need a fossil driver?

A fossil is a big help, and if multinode, probably manditory.

MP> I am running a DOS BBS program under OS/2 using Vmodem SIO2K.  The BBS
MP> program itself works fine, but the protocols do not.  The BBS program
MP> is running without a fossil (unless Vmodem is considered a fossil).
MP> Would fdsz help fix my problem?

Vmodem is only an modem emulator and I believe you can't run Vmodem
without SIO. SIO is the fossil. If you have the sio lines in
config.sys stating which ports are "INTERNET" then you are running
a fossil.

IN =  TCPIP signal -> Vmodem -> SIO -> BBS
OUT = BBS -> SIO -> Vmodem -> TCPIP signal

DSZ should work as long as the pass params are correct and you
have the proper dsz environ vars set.

DSZ works quite well here in telnet, tho I've only set it up with
Zmodem.

Cheers...
Gordon Lewicky (Pdk)

email [email protected]   www.milkyway-bbs.ca


--- EzyBlueWave V2.01b005 00F90260
* Origin: Milky Way, Langley, BC [604] 532-4367 (1:153/307)

You are viewing proxied material from cvs.synchro.net. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.