Subj : Ezycom & OS/2
To : Mike Tripp
From : Leonard Erickson
Date : Sun May 11 2003 10:12 pm
-=> Quoting Mike Tripp to Leonard Erickson <=-
MT>> Have you tried reconfiguring the protocols with MPTS adding
MT>> Netware first? I seem to recall having some issues with
MT>> coexistence if the TCP/IP was added/configured before the Netware
MT>> myself.
LE> I've got Netware working (been working for years).
MT> I am referring to configuring the OS/2 Netware client...not the Novell
MT> server.
LE> But my local OS/2 gurus don't know anything about Netware, and
LE> none of the attempts by them or buy me get T CP/IP working.
LE> One got TCP/IP working by redoing the config.sys, but with that
LE> config.sys, Netware won't work.
MT> Trying to get there by hacking CONFIG.SYS is definitely "the hard
MT> way", particularly for a multiprotocol setup. You can have all the
MT> correct statements but in the wrong sequence (including
MT> out-of-sequence with other non-networking-related lines) and still not
MT> get there from here. You may end up needing to know the differences
MT> between ODI vs NDIS and shims between, Netware-specific PROTOCOL.INI
MT> statements, edit NIC-specific .NIFs, etc. If your gurus don't have
MT> Netware experience, they will probably not be guru enough for this
MT> particular approach to this particular exercise.
Well, according to MPTS I've *already* got TCP/IP installed.
[E100BODI].....
0 - IBM OS/2 NETBIOS
2 - IBM Netware Requester Support
1 - IBM TCP/IP
So according to you, I should change the numbers on the last two?
