Subj : Quiet!
To   : Sean Dennis
From : Peter Knapper
Date : Fri Sep 29 2006 10:14 pm

Hi Sean,

PK> What method are you using for terminating the call? By far the best
PK> method is to drop DTR rather than rely on a modem control string
PK> (+++ATH0). However the catch with this is that your S/W must be

SD> Well, this is for VMODEM.  Here's my settings:

SD> A. Modem description    Node 2
SD> B. Communication port   COM2
SD> C. Port information     IRQ 2, Base I/O address 2F8
SD> D. Maximum BPS rate     57600 bps
SD> E. Locked BPS rate      Locked at 57600 bps
SD> F. Init command         "~~~~~~ATZ"
SD> G. Answer command       "ATA"
SD> H. Hangup command       "~~~ATH0"

Try adding a delay AFTER the Hangup (ATH0), whatever your comms program is
talking to the port, it may be trying to re-active the port too quick for
VMODEM to react/respond...

SD> I. Offhook command      "ATM0H1"

SD> J. Flow control type    XON/XOFF (sw)
SD> K. Re-init timing       255 mins
SD> L. Command delay        0.5 secs
SD> M. Answer delay         0.5 secs
SD> N. DTR drop delay       0.5 secs

Try increasing this to 1-2 seconds and see if that helps. Sometimes speed
kills.......;-)

SD> O. Hangup w/DTR toggle   No

And try setting this to Yes and see how it goes...

SD> P. Fossil in OS shell    Active
SD> R. Answer after ring     1
SD> S. Ring counter reset    N/A

Cheers............pk.


--- Maximus/2 3.01
* Origin: Another Good Point About OS/2 (3:772/1.10)

You are viewing proxied material from cvs.synchro.net. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.