Subj : Sio vs Sio2k
To   : Rich Wonneberger
From : Torsten Bamberg
Date : Sat Apr 16 2005 10:40 pm

Hallo Rich,

RW> I am using something similar to this.  I disabled com2 in BIOS and used
RW> the 'virtual' IRQ in SIO.  I use IRQ-4 for com1, and IRQ-3 for -all- my
RW> INTERNET ports.  Its not a real IRQ (or port address) for SIO. My com1 is
RW> a real port for dial-in.
Well, there is no need for a irq on virtual ports. :-)
Just take a look at my config.sys:

--- Beginn CONFIG.SYS ---
DEVICE=C:\SIO\SIO.SYS (COM1:115200,3F8,IRQ4,,)(COM3,INTERNET,NONE)(COM4,INTERNET,NONE)
DEVICE=C:\SIO\VSIO.SYS
--- Ende CONFIG.SYS ---

Com2 is used on my dcf77-clock with another driver.

RW> Soon I should have TAG set up for I-net.   :}

RW> Rich
RW> I-Net   [email protected]
By/2 Torsten

--- GoldED/2 3.0.1
* Origin: a message... (2:240/5832)

You are viewing proxied material from cvs.synchro.net. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.