Subj : Re: Binkley

Subj : Re: Binkley
To : Paul Quinn
From : Marcin Gondek
Date : Wed Jul 04 2001 03:48 pm

Sveiki Paul!

Wednesday July 04 2001 22:13, you wrote to me:

PQ> Does your outbound directory in FastEcho (FE) match the one set in
PQ> Argus?

Yes, echomail is working good.

PQ> If you're bundling mail to other zones, Argus may not be seeing the
PQ> other zone outbounds created by FE (where the .CLO file is created).
PQ> I had that problem here a while back, with the names of the outbound
PQ> directories not being seen by Binkley or BinkD. Only mail for other
PQ> zones was affected, since FE kept creating domain named directories
PQ> for Fidonet zones.

All is for zone 2

PQ> Are you using the netmail routing that FE creates automatically for
PQ> each up/down-link, or, are you using a route file (with routing
PQ> statements like 'ROUTE-TO' & 'DIRECT')?

My route.fe file

=== Begin ROUTE.FE ===
Route-to 2:480/112 2:480/112.* 2:481/* 2:482/* 2:484/* 2:48/*
Route-to 2:480/112 2:480/46.* 2:480/58.* 2:480/82.* 2:480/106.*
Route-to 2:480/112 2:480/109.* 2:480/110.* 2:480/115.* 2:480/120.*
Route-to 2:480/112 2:480/125.* 2:480/133.*
Route-to 2:480/112 1:* 4:* 5:* 6:* 2:*
Route-to 2:467/70 2:460/* 2:4600/*
Route-to 2:467/70 2:461/* 2:4613/* 2:4614/* 2:4615/* 2:4616/*
Route-to 2:467/70 2:462/* 2:4621/* 2:4623/* 2:4624/* 2:4625/* 2:4626/* 2:4627/*
Route-to 2:467/70 2:463/* 2:4631/* 2:4632/* 2:4633/* 2:4634/* 2:4635/*
Route-to 2:467/70 2:464/* 2:4641/* 2:4642/* 2:4643/* 2:4646/* 2:4647/* 2:4648/*
Route-to 2:467/70 2:465/* 2:4651/* 2:4652/* 2:4653/* 2:4654/* 2:4655/* 2:4656/*
Route-to 2:467/70 2:4657/* 2:4658/*
Route-to 2:467/70 2:466/* 2:467/* 2:468/* 2:469/*
Route-to 2:480/33 2:480/33.* 2:480/17.* 2:480/37.* 2:480/51.* 2:480/57.*
Route-to 2:480/33 2:480/65.* 2:480/66.* 2:480/70.* 2:480/100.*
Route-to 2:480/127 2:480/127.* 2:480/32.* 2:480/124.* 2:480/130.* 2:480/135.*
Route-to 2:480/128.9 2:480/128.9
Route-to 2:480/128.123 2:480/128.123
Route-to 2:2432/200 2:2432/200.*
Route-to 2:2432/200 3:*
Route-to 2:5020/1951 2:5020/1951.* 2:5020/*
Direct MYPOINTS
=== End ROUTE.FE ===

PQ> I use "FastEcho.Exe PACK -P -R%TMPDRV%\RouteNet.Fe", with my routing
PQ> specified in that file. (It was easy for me, as the routing
PQ> statements were very similar to those used by the FrontDoor mailer
PQ> Route.Fd file.) Have you tried any '-<option>' parameters with your
PQ> netmail packing?

yep, not working.

____________________________________________________________
[ Marcin Gondek / Drixter ][ REC 48 ][ [email protected] ]
[ 2:48/911@FidoNet ][ Utopia Mail System ][ ICQ UIN 99230394 ]

\\UTOPIA has been up for: 0 day(s), 2 hour(s), 21 minute(s), 29 second(s)
---
* Origin: Utopia Mail System +48-22-6692785 22:00-06:00 CET (2:480/128)