Subj : Re: Alternative solution - was [Re: Manually setting a STATIC IP in Wi
To : All
From :
[email protected]
Date : Fri Jan 18 2019 09:23 am
Path:
eternal-september.org!news.eternal-september.org!feeder.eternal-september.org!b
order1.nntp.ams1.giganews.com!nntp.giganews.com!news.astraweb.com!border5.a.new
srouter.astraweb.com!news.tele.dk!news.tele.dk!small.news.tele.dk!newsgate.cist
ron.nl!newsgate.news.xs4all.nl!nzpost1.xs4all.net!not-for-mail
From: "R.Wieser" <
[email protected]>
Newsgroups: microsoft.public.windowsxp.help_and_support
References: <
[email protected]>
<
[email protected]>
Subject: Re: Alternative solution - was [Re: Manually setting a STATIC IP in
WinXPPro]
Date: Wed, 18 Jan 2017 16:23:15 +0100
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 5.00.2615.200
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200
Lines: 49
Message-ID: <
[email protected]>
NNTP-Posting-Host: 83.163.119.5
X-Trace: 1484752720 news.xs4all.nl 21525 83.163.119.5:3565
X-Complaints-To:
[email protected]
Xref: news.eternal-september.org
microsoft.public.windowsxp.help_and_support:31891
Richard,
> The minimal network was being pursued as it was a close as
> I *HAD THOUGHT* I could come to a "null modem cable".
Thats the "cross over" cable I mentioned* :-)
*although a null-modem cable normally includes cross-over, it does need to.
But its still a good idea to first connect to a known-to-be-good device (the
modem or smart switch (or anything else with a web-accessible setup) I
mentioned) so that you can see your fixed IP actually works (on both
'puters), _before_ you try that cross-over cable (I'm not sure you realize,
but now you've introduced a _third_ location that could give you troubles
with setting up such a 'puter-to-'puter connection).
Regards,
Rudy Wieser
-- Origional question.
Richard Owlett <
[email protected]> schreef in berichtnieuws
[email protected]...
> On 1/16/2017 7:47 AM, Richard Owlett wrote:
> > I have two Lenovo laptops. One running WinXP Pro. The other runs
> > Linux.
> > I wish to create a minimal network. It will consist of only those
> > two machines.
> > Neither will have any internet connectivity.
> >
> > I've found a number of web references to setting static IP
> > addresses on Windows machines.
> > *HOWEVER* assume internet connectivity by one/both machines.
> >
> > Can anyone point me to any documentation EXPLICITLY covering my
> > {admittedly} peculiar requirement.
> >
> > TIA
>
> The minimal network was being pursued as it was a close as I *HAD
> THOUGHT* I could come to a "null modem cable".
> A USB implementation is available -
>
http://www.mouser.com/ds/2/163/DS_USBNMC-5030.pdf .
> I'll check local suppliers.
> Will also continue pursuing the LAN solution for its educational
> value.
--- Platinum Xpress/Win/WINServer v3.1
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)
