Subj : 6/12 Nat'l Jerky Day - 4
To   : All
From : Dave Drum
Date : Wed Jun 11 2025 01:16 pm

MMMMM----- Recipe via Meal-Master (tm) v8.06

     Title: Bacon Jerky
Categories: Five, Pork, Rubs
     Yield: 1 Batch

     2 lb Regular cut bacon; (your gut
          - tells you thick-cut will
          - be better. But it's not)

MMMMM--------------------------DRY RUB-------------------------------
          Brown sugar
          Coarse black pepper
          Garlic granules or powder

 NEEDED: ZipLoc (style) bags, hickory wood/chips, two
 cookie sheets, two cooling racks, offset smoker/oven
 or dehydrator.

 In order to start making your bacon jerky, first start
 by placing the cooling racks into the cookie sheets.

 This should allow the smoke to surround your meat for
 the initial cooking process.

 Note: You should find that you can work one pound of
 meat per cookie sheet, cooling rack setup.

 But, if you are using more than 2 pounds of meat or just
 could not manage to fit 1 pound of meat per sheet, then
 feel free to get some extra cookie sheets.

 After you place your meat on cookie sheets, make sure
 you leave some space between so there is a little room
 between the slices.

 Now, it is time to apply your rub ingredients.

 As opposed to smoking other meats where you mix your rub
 and liberally apply your concoction, with this recipe,
 lightly sprinkle these dry ingredients to taste.

 We're lightly dusting the garlic powder, a little
 heavier pinch of the black pepper, and a little less
 brown sugar compared to the pepper.

 This is going to give us the sweet and savory flavor
 combination we'e desiring. When you're done, flip the
 meat and apply your seasoning rubs to the other side.

 QUICK COOKING TIP: For making any jerky, do not limit
 your seasoning. You might enjoy a favorite marinade,
 salad dressing, hot sauce, srirarcha, hot dry peppers or
 a stronger dose of sugar or honey. Your potential is
 open, but, you may want to limit the amounts you put on
 so that you don’t overpower your jerked meats.

 Now, after you finish seasoning your meat, take your
 racks of potential jerky and put them into the
 refrigerator for about one hour.

 While they are on the refrigerator, you can go and start
 your fire and get your smoker ready.

 Once your fire is going good, and the coals are turning
 gray, put your first piece of hickory wood on.

 Monitor your fire to around 190°F. When you have a good
 steady temperature of 190°F, which should be monitored
 as close to the cooking surface as possible, bring out
 your bacon meat.

 In order to properly make bacon jerky, you have to
 follow a two step cooking process. The first part of the
 process is to use a smoker and then, to remove your meat
 from the smoker and to place it into the oven.

 If your temperatures are consistent, you shouldn't have
 too much of a problem and the only thing to worry about
 is the grease. You will want to check them after one
 hour to see what your grease status is.

 Your cookie sheet will hold any grease drippings but if
 your bacon has a larger fat content than normal, you
 will want to dump the excess grease off into an old
 coffee can for disposal. Be sure to close your smoker
 while you’re doing this to maintain the temperature and
 smoke levels.

 After two hours of smoking it at a consistent
 temperature, your bacon jerky is about half done and is
 time for the second part of the cooking.

 While your oven is heating up, drain any grease that has
 accumulated since you last checked. At this time you may
 want to blot for any residual grease on the meat.

 Once your oven is ready, slide it in the already smoked
 bacon jerky.

 Now, your cooking time should be three more hours in the
 oven.

 RECIPE FROM: https://furiousgrill.com

 Uncle Dirty Dave's Archives

MMMMM

... Chefs, please stop trying so hard to be so pathetically trendy.
--- MultiMail/Win v0.52
* Origin: SouthEast Star Mail HUB - SESTAR (1:3634/12)