Subj : Re: Need advice re: DIY f
To : All
From : ~*~ Vosklady ~*~
Date : Mon Nov 24 2003 11:05 am
"NetMax" <
[email protected]> wrote in message
news:
[email protected]...
>
> "~*~ Vosklady ~*~" <
[email protected]> wrote in message
> news:
[email protected]...
> >
> > "NetMax" <
[email protected]> wrote in message
> > news:
[email protected]...
> > >
> > > Materials and adhesives must be inert (ie: silicone, epoxy,
> fibreglass).
> >
> > So I'm guessing that . . . AllGlass Aquarium Silicone would be the
> > "silicone" to use . . . is this correct thinking Max? :)
> >
> > TIA
> >
> > ~*~ Vosklady ~*~
>
> Two parameters of interest with silicone are toxicity (herbicides) and
> strength (sealants vs adhesives). If your interest is in gluing
> structures inside the aquarium, then your primary interest is in
> toxicity. GE Silicone 1 for windows & doors is non-toxic last time I
> checked.
>
> If you are interested in holding glass together, then GE also has an
> aquarium product line (check their site) which is good for up to 5g, so
> at least you know it is not toxic, but it's not available everywhere (and
> who wants to build a 5g tank?). The industrial versions GE said were
> safe to use were: GE012 (clear), GE12A (clear), GE112 (white), GE312
> (black) and GE361 (clear), but this is not advertised (use at your risk).
>
> I just picked up a GE RTV100 series and I'm checking if that is aquarium
> applicable. I'd think that AllGlass Aquarium Silicone would be the right
> stuff ;~), (might be a bit pricey), and if you're using it to build an
> aquarium, surface preparation is as important as the silicone.
>
> NetMax
>
Thanks so much for the info Max . . . as always, it's appreciated. ;)
Regards,
~*~ Vosklady ~*~
---
� RIMEGate(tm)/RGXPost V1.14 at BBSWORLD *
[email protected]
---
* RIMEGate(tm)V10.2�* RelayNet(tm) NNTP Gateway * MoonDog BBS
* RgateImp.MoonDog.BBS at 11/24/03 11:05:31 AM
* Origin: MoonDog BBS, Brooklyn,NY, 718 692-2498, 1:278/230 (1:278/230)
