https://git.spwbk.site/swatson/chate.io/raw/master/gopher.conf
___________________________________
##############################################################
#                                                            #
#     CONFIGURATION FILE FOR THE MOTSOGNIR GOPHER SERVER     #
#                                                            #
# This configuration file controls how the motsognir gopher  #
# server should behave. Every option listed here can be      #
# overloaded through command-line. Example:                  #
#   $ motsognir --gopherport 7070                            #
#                                                            #
# motsognir can run without a config file at all, provided   #
# that it gets its configuration through command-line        #
# options. To disable the config file lookup, use the        #
# command-line --config parameter with an empty argument:    #
#   $ motsognir --config '' --gopherport 7070 etc            #
#                                                            #
##############################################################


## Server's hostname ##
# The hostname the gopher server is reachable at. This setting is highly
# recommended, because the gopher protocol is heavily relying on self-pointing
# links. If not declared, the server's IP address will be used instead.
GopherHostname=chate.io

## Gopher TCP port ##
# The TCP port on which the public Gopher server listens on.
# Usually, gopher servers are published on port 70. Default: 70.
GopherPort=70

## Bind on IP address ##
# Set this 'bind' parameter to the IP address you'd like Motsognir to listen
# on. Note, that this parameter must be either an IPv6 address, or an IPv4
# address written in IPv4-mapped IPv6 notation (for ex. "::FFFF:10.0.0.1").
# If not specified, Motsognir will listen on all available IP addresses.
# This setting might be useful if you have a multihomed server, and you would
# like to serve different content for each IP address.
# Examples:
#  bind=2001:DB8:135:A0E3::2
#  bind=::FFFF:192.168.0.3
bind=

## Disable IPv6 support ##
# Set this to 1 to DISABLE IPv6 support within Motsognir. Please note that
# when IPv6 is enabled (which is the default), Motsognir may or may not listen
# to both IPv4 and IPv6 sockets. This is somewhat of a mess, and it is related
# to how your operating system treats IPv6 sockets. Most sane operating
# systems support dual-stack sockets. In such environments, Motsognir will
# open an IPv6 socket and mark it as "not-only-ipv6" (setting IPV6_BINDV6ONLY
# to false), thus instructing the operating system to accept both IPv4 and
# IPv6 packets on this socket. Unfortunately, some exotic systems are
# religiously against dual-stack sockets (as of 2019, I know about at least
# two such systems: OpenBSD and DragonFlyBSD). On these systems, an IPv6
# socket is unable to accept IPv4 packets, hence Motsognir ends up receiving
# exclusively IPv6 traffic. As a workaround for such systems, one should run
# two instances of Motsognir (one for each protocol). This means two separate
# configuration files: one with and one without the setting below being set.
disableipv6=1

## Root directory ##
# That's the local path to Gopher resources. Note, that if you use a chroot
# configuration, you must provide here the virtual path instead of the real
# one.
# The default path is /var/gopher/
GopherRoot=/var/www/gopher/root/

## Allowed public directories ##
# In specific situations, it may happen that you'd like to be able to serve
# files from outside of your gopher root (typically, if you used symlinks
# inside your gopher root, that points to other places of the file system).
# By default Motsognir won't allow such resources to be served, since requests
# that try to access anything outside of the gopher root are considered as
# potentially malicious. However, if you do want to serve content from outside
# your gopher root, then fill in below the list of directories that are
# allowed to be served. Items of this list should be separated by a ':' char.
# Example: PubDirList=/srv/files:/var/lib/stuff:/tmp
PubDirList=

## User home directories ##
# If you'd like to serve gopher content from user directories, using the
# classic /~user/ URL scheme, then define the user directories location here
# below. The configured location must contain a '%s' tag, which will be
# substituted with the username by motsognir. This must be an absolute path.
# If nothing is configured, then support for serving content from user
# directories won't be available. Example:
# UserDir=/home/%s/public_gopher/
UserDir=

## chroot configuration ##
# If you'd like to put Motsognir inside a chroot jail, configure here the
# chroot directory that shall be used. By default no chroot is used.
chroot=

## Paranoid mode ##
# For paranoidal security, you might want to enable "Paranoid mode". In this
# mode, Motsognir accepts to serve only files with permissions set to "world
# readable".
# Possible values: 0 (disabled) or 1 (enabled). Disabled by default.
ParanoidMode=1

## Plugin ##
# Power-admins might want to craft some additional logic into Motsognir. This
# is possible using a 'plugin', ie. a simple application or php script that
# Motsognir will submit incoming queries to. The plugin can decide whether or
# not it wants to handle a given query (if not, then Motsognir will process it
# as usual. The queries that Motsognir will submit to the plugin can be
# filtered by using a 'PluginFilter'. This is a 'POSIX extended' regular
# expression that will be compared to every incoming query, and only matching
# queries are submitted to the plugin. Read more in the manual.
Plugin=
PluginFilter=

## Activate the verbose mode ##
# Here you can enable/disable the verbose mode. In verbose mode, Motsognir
# will generate much more logs. This is useful only in debug situations.
# Possible values: 0 (disabled) or 1 (enabled). Disabled by default.
Verbose=0

## Syslog facility ##
# Motsognir logs all its messages through the LOG_DAEMON syslog facility by
# default. In some situations you may want to change the logging facility to
# a custom one. Setting LogFacility to an integer between 0 and 7 will make
# motsognir log its messages through the syslog facility LOCAL0-LOCAL7.
LogFacility=

## CGI support ##
# The line below enables/disables CGI support. Read the manual for details.
# Possible values: 0 (disabled) or 1 (enabled). Disabled by default.
GopherCgiSupport=1

## PHP support ##
# There you can enable PHP support.
# Possible values: 0 (disabled) or 1 (enabled). Disabled by default.
GopherPhpSupport=0

## Sub-gophermap scripts ##
# If you'd like to use sub-gophermap scripts in your gophermaps, set
# SubGophermaps.
# Possible values: 0 (disabled) or 1 (enabled). Disabled by default.
SubGophermaps=1

## Period-stuffing and period-terminator for text files ##
# RFC 1436 mandates that text files returned by a gopher server must feature
# a dot terminator (a single period on a line on its own), and that any dot
# appearing at the start of a line shall be doubled.
# Many (most?) gopher clients do not follow these requirements, and fail to
# process such extra periods. Enabling 'NoTxtPeriod' will prevent motsognir
# from adding any such periods. Please note that while this may have a
# practical value, it is a blatant violation of RFC 1436.
NoTxtPeriod=0

## Secondary URL-delimiting char
# By default, only the '?' char is recognized as a delimiter between an
# object and the query that must be run on the object. With this parameter,
# you can define an additional character that will be equivalent to '?'. This
# character must be provided in a numerical form, as an ASCII value.
# Example for the hash (#) character:
# SecUrlDelim=35
SecUrlDelim=

## Run as another user ##
# If you start motsognir under a root account, you might want to configure
# it so it drops root privileges as soon as it doesn't need them anymore and
# switches to another user. This is recommended for increased security,
# unless you already run Motsognir as a non-root user. To do so, provide here
# the username of the user that Motsognir should run as. Default = no value.
RunAsUser=www-data

## Default gophermap #
# If you wish that your server would use a default gophermap when displaying
# a directory that do not have a gophermap, you can specify here a path to
# the gophermap file you'd like to use.
DefaultGophermap=

## HTTP error file
# When Motsognir receives a HTTP request, it answers with a HTTP error, along
# with a html message indicating why it is wrong. If you'd like to use a
# custom html file, you can set it here. Note, that the specified file is
# loaded when Motsognir's starts. If you modify the file afterwards, you'll
# need to restart the Motsognir process for the file to be reloaded.
# Example: HttpErrFile=/etc/motsognir-httperr.html
HttpErrFile=

## Caps.txt support ##
# Caps.txt is a specific file-like selector, which allows a gopher client to
# know more about the server's implementation (for example what the path's
# delimiter is, where is the server located, etc). When enabled, Motsognir
# will answer with caps-compatible data to requests for "/caps.txt".
# Caps support is enabled by default (CapsSupport=1).
CapsSupport=1

## Caps additionnal informations ##
# If Caps support is enabled, you can specify there some additional
# informations about your server. These informations will be served to gopher
# clients along with the CAPS.TXT data.
# Example:
#  CapsServerArchitecture=Linux/i386
#  CapsServerDescription=This is my server
#  CapsServerGeolocationString=Dobrogoszcz, Poland
#  CapsServerDefaultEncoding=UTF-8
CapsServerArchitecture=Linux
CapsServerDescription=The Chateau
CapsServerGeolocationString=NYC, USA
#CapsServerDefaultEncoding=UTF-8

## Extension to filetype mapping ##
# Motsognir looks at file's extensions to advertise the proper gopher resource
# type. If the default mapping is not suiting you, you can load a custom
# mapping using a separate configuration file called an 'extmap', and declare
# it below. The extmap file is a simple text file, where every line provides
# a mapping for a single file extension, in such format:
#  txt:0
#  pdf:P
#  gif:g
# Note: Extensions in the extmap file are processes in a case-insensitive way.
ExtMapFile=

# [End of file here]

You are viewing proxied material from chate.io. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.