| View Source | |
| # RAD DATA COMMUNICATIONS | |
| CMN-C6AC, CMN-C6ACU | |
| Card Type Modem (asynchronous) | |
| Chipset Unidentified | |
| Maximum Data Rate 19.2Kbps x 2 | |
| Data Modulation Unidentified | |
| Data Bus Proprietary | |
| IMG 1 | |
| +------------------------------------------------------------+ | |
| | CONNECTIONS | | |
| |------------------------------------------------------------| | |
| | Function | Label | Function | Label | | |
| |----------------------+-------+---------------------+-------| | |
| | Telephone line 1 out | CN1 | Telephone line 2 | CN3 | | |
| | | | out | | | |
| |----------------------+-------+---------------------+-------| | |
| | Serial port data 1 | CN2 | Serial data port 2 | CN4 | | |
| +------------------------------------------------------------+ | |
| +------------------------------------------------------------+ | |
| | USER CONFIGURABLE SETTINGS | | |
| |------------------------------------------------------------| | |
| | Setting | Label | Position | | |
| |--------------------------------+-------+-------------------| | |
| | í DCD forced high on modem 1 | JP1 | Pins 2 & 3 closed | | |
| |--------------------------------+-------+-------------------| | |
| | DCD follows DTR on modem 1 | JP1 | Pins 1 & 2 closed | | |
| |--------------------------------+-------+-------------------| | |
| | í DCD forced high on modem 2 | JP2 | Pins 2 & 3 closed | | |
| |--------------------------------+-------+-------------------| | |
| | DCD follows DTR on modem 2 | JP2 | Pins 1 & 2 closed | | |
| |--------------------------------+-------+-------------------| | |
| | í CN2 is DCE | SW1 | Off | | |
| |--------------------------------+-------+-------------------| | |
| | CN2 is DTE | SW1 | On | | |
| |--------------------------------+-------+-------------------| | |
| | í CN4 is DCE | SW2 | Off | | |
| |--------------------------------+-------+-------------------| | |
| | CN4 is DTE | SW2 | On | | |
| +------------------------------------------------------------+ | |
| +------------------------------------------------------------+ | |
| | DIAGNOSTIC LED(S) | | |
| |------------------------------------------------------------| | |
| | LED | Color | Status | Condition | | |
| |------+--------+--------+-----------------------------------| | |
| | PWR | Green | On | Power is on | | |
| |------+--------+--------+-----------------------------------| | |
| | PWR | Green | Off | Power is off | | |
| |------+--------+--------+-----------------------------------| | |
| | XMT1 | Yellow | On | Modem 1 is transmitting data | | |
| |------+--------+--------+-----------------------------------| | |
| | XMT1 | Yellow | Off | Modem is 1 not transmitting data | | |
| |------+--------+--------+-----------------------------------| | |
| | RCV1 | Yellow | On | Modem 1 is receiving data | | |
| |------+--------+--------+-----------------------------------| | |
| | RCV1 | Yellow | Off | Modem 1 is not receiving data | | |
| |------+--------+--------+-----------------------------------| | |
| | DCD1 | Yellow | On | Carrier signal detected on line 1 | | |
| |------+--------+--------+-----------------------------------| | |
| | DCD1 | Yellow | Off | Carrier signal not detected on | | |
| | | | | line 1 | | |
| |------+--------+--------+-----------------------------------| | |
| | XMT2 | Yellow | On | Modem 2 is transmitting data | | |
| |------+--------+--------+-----------------------------------| | |
| | XMT2 | Yellow | Off | Modem is 2 not transmitting data | | |
| |------+--------+--------+-----------------------------------| | |
| | RCV2 | Yellow | On | Modem 2 is receiving data | | |
| |------+--------+--------+-----------------------------------| | |
| | RCV2 | Yellow | Off | Modem 2 is not receiving data | | |
| |------+--------+--------+-----------------------------------| | |
| | DCD1 | Yellow | On | Carrier signal detected on line 1 | | |
| |------+--------+--------+-----------------------------------| | |
| | DCD1 | Yellow | Off | Carrier signal not detected on | | |
| | | | | line 1 | | |
| +------------------------------------------------------------+ | |
| +------------------------------------------------------------+ | |
| | MISCELLANEOUS TECHNICAL NOTE | | |
| |------------------------------------------------------------| | |
| | This card is intended for use in the CMN-16 rack-mount | | |
| | system. The bus is used only for supplying power for the | | |
| | card. All other card functions are accessed through the | | |
| | serial ports. | | |
| +------------------------------------------------------------+ |