Introduction
Introduction Statistics Contact Development Disclaimer Help
View Source
# INTERLOGIC INDUSTRIES
A104-FM
Modem Type Data/Fax
Maximum Data Rate 2400 bps
Maximum Fax Rate 9600 bps
Data Bus Unidentified
Fax Class Unidentified
Data Modulation Protocol Bell 103A & 212A, CCITT V.22
Fax Modulation Protocol Unidentified
Error Correction/Compression CCITT V.42 & V.42bis, MNP 5
IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Purpose | Location | Purpose | Location |
|------------------+----------+------------------+-----------|
| Line in | CN1 | Line out | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COM PORT SETTINGS |
|------------------------------------------------------------|
| COM | JP1 | JP2 | JP3 |
|--------+-----------------+----------------+----------------|
| í COM4 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 |
| | closed | closed | closed |
|--------+-----------------+----------------+----------------|
| COM1 | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 |
| | closed | closed | closed |
|--------+-----------------+----------------+----------------|
| COM2 | Pins 2 & 3 | Pins 2 & 3 | Pins 1 & 2 |
| | closed | closed | closed |
|--------+-----------------+----------------+----------------|
| COM3 | Pins 1 & 2 | Pins 1 & 2 | Pins 2 & 3 |
| | closed | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECTOR JP4 |
|------------------------------------------------------------|
| Purpose | Location |
|-------------------------------+----------------------------|
| Pair 2 Tip & Ring | Pins 1 & 4 |
|-------------------------------+----------------------------|
| Pair 1 Tip & Ring | Pins 2 & 3 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| S14 -BIT MAPPED CONFIGURATION REGISTER |
|------------------------------------------------------------|
| Value Range: | Bit-mapped |
|---------------------+--------------------------------------|
| Default: | 1 |
|---------------------+--------------------------------------|
| Type: | Read/Write |
|---------------------+--------------------------------------|
| In Stored Profile?: | Yes |
|---------------------+--------------------------------------|
| Description: | Bit Mapped Configuration Register |
|------------------------------------------------------------|
| Bit | Value | Function |
|-------------+---------+------------------------------------|
| 0 | 0 | Not used |
|-------------+---------+------------------------------------|
| 1 | í 1 | Enable: Command echo (E1) |
| | | |
| | 0 | Disable: Command echo (E0) |
|-------------+---------+------------------------------------|
| 2 | í 0 | Enable: Result codes (Q0) |
| | | |
| | 1 | Disable: Result codes (Q1) |
|-------------+---------+------------------------------------|
| 3 | í 1 | Set result codes to word (V1) |
| | | |
| | 0 | Set result codes to digit (V0) |
|-------------+---------+------------------------------------|
| 4 | 0 | Not used |
|-------------+---------+------------------------------------|
| 5 | í 1 | Set to Pulse dial (P) |
| | | |
| | 0 | Set to Tone Dial (T) |
|-------------+---------+------------------------------------|
| 6 | 0 | Not used |
|-------------+---------+------------------------------------|
| 7 | í 1 | Enable: Originate mode |
| | | |
| | 0 | Enable: Answer mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| S21 -BIT MAPPED CONFIGURATION REGISTER |
|------------------------------------------------------------|
| Value Range: | Bit-mapped |
|-----------------+------------------------------------------|
| Default: | 1 |
|-----------------+------------------------------------------|
| Type: | Read/Write |
|-----------------+------------------------------------------|
| In Stored | Yes |
| Profile?: | |
|-----------------+------------------------------------------|
| Description: | Bit Mapped Configuration Register |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+--------+---------------------------------------|
| 0 | 0 | Not used |
|-----------+--------+---------------------------------------|
| 1 | 0 | Not used |
|-----------+--------+---------------------------------------|
| 2 | 0 | Not used |
|-----------+--------+---------------------------------------|
| 3 & 4 | í 00 | Sets modem to ignore DTR (&D0) |
| | | |
| | 01 | ON-to-OFF transition on DTR forces |
| | | the modem to enter the command mode |
| | 10 | (&D1) |
| | | |
| | 11 | ON-to-OFF transition on DTR forces |
| | | the modem to hang up (&D2) |
| | | |
| | | ON-to-OFF transition on DTR forces |
| | | the modem to reset (&D3) |
|-----------+--------+---------------------------------------|
| 5 | í 0 | Enable: DCD always ON (&C0) |
| | | |
| | 1 | DCD checks the actual state of the |
| | | data carrier (&C1) |
|-----------+--------+---------------------------------------|
| 6 | 0 | Not used |
|-----------+--------+---------------------------------------|
| 7 | í 0 | Disable: Long Space Disconnect (Y0) |
| | | |
| | 1 | Enable: Long Space Disconnect (Y1) |
+------------------------------------------------------------+
+------------------------------------------------------------+
| S22 -BIT MAPPED CONFIGURATION REGISTER |
|------------------------------------------------------------|
| Value Range: | Bit-mapped |
|-----------------+------------------------------------------|
| Default: | 1 |
|-----------------+------------------------------------------|
| Type: | Read/Write |
|-----------------+------------------------------------------|
| In Stored | Yes |
| Profile?: | |
|-----------------+------------------------------------------|
| Description: | Bit Mapped Configuration Register |
|------------------------------------------------------------|
| Bit | Value | Function |
|-----------+--------+---------------------------------------|
| 0 & 1 | í 10 | Speaker volume set to medium (l1) |
| | | |
| | 00 | Speaker volume set to low (l0) |
| | | |
| | 01 | Speaker volume set to low (l1) |
| | | |
| | 11 | Speaker volume set to high (l3) |
|-----------+--------+---------------------------------------|
| 2 & 3 | í 01 | Enable: Speaker on until carrier |
| | | detected (M1) |
| | 00 | |
| | | Disable: Speaker (M0) |
| | 10 | |
| | | Enable: Speaker always on (M2) |
| | 11 | |
| | | Enable: Speaker on until carrier |
| | | detected but Off during dialing (M3) |
|-----------+--------+---------------------------------------|
| 4 & 5 & 6 | í 111 | Enable: fourth extended result code |
| | | set (X4) |
| | 000 | |
| | | Enable: basic result code set (x0) |
| | 100 | |
| | | Enable: first extended result code |
| | 101 | set (X1) |
| | | |
| | 110 | Enable: second extended result code |
| | | set (X2) |
| | | |
| | | Enable: third extended result code |
| | | set (X3) |
|-----------+--------+---------------------------------------|
| 7 | í 0 | Set Make/Break ratio is 39/61 for USA |
| | | (&P0) |
| | 1 | |
| | | Set Make/Break ratio is 33/67 for |
| | | UK/HK (&P1) |
+------------------------------------------------------------+
+------------------------------------------------------------+
| S23 - BIT MAPPED CONFIGURATION REGISTER |
|------------------------------------------------------------|
| Value Range: | Bit-mapped |
|-------------------+----------------------------------------|
| Default: | 1 |
|-------------------+----------------------------------------|
| Type: | Read/Write |
|-------------------+----------------------------------------|
| In Stored | Yes |
| Profile?: | |
|-------------------+----------------------------------------|
| Description: | Bit Mapped Configuration Register |
|------------------------------------------------------------|
| Bit | Value | Function |
|-------------+--------+-------------------------------------|
| 0 | í 1 | Disable: Accept request from remote |
| | | modem for a remote digital loopback |
| | 0 | (&T5) |
| | | |
| | | Enable: Accept request from remote |
| | | modem for a remote digital loopback |
| | | (&T4) |
|-------------+--------+-------------------------------------|
| 1 & 2 & 3 | 000 | 300 bps |
| | | |
| | 001 | 600 bps |
| | | |
| | 010 | 1200 bps |
| | | |
| | 011 | 2400 bps |
| | | |
| | 100 | 4800 bps |
| | | |
| | 101 | 9600 bps |
|-------------+--------+-------------------------------------|
| 4 & 5 | 00 | Enable: Even parity. |
| | | |
| | 01 | Enable: Space parity. |
| | | |
| | 10 | Enable: Odd parity. |
| | | |
| | 11 | Enable: Mark parity. |
|-------------+--------+-------------------------------------|
| 6 | í 00 | Disable: Guard tone (&G0) |
| | | |
| | 01 | Enable: 550 Hz guard tone (&G2) |
| | | |
| | 10 | Enable: 1800 Hz guard tone (&G2) |
| | | |
| | 11 | Not used |
+------------------------------------------------------------+
+------------------------------------------------------------+
| S27 -BIT MAPPED CONFIGURATION REGISTER |
|------------------------------------------------------------|
| Value Range: | Bit-mapped |
|-----------------+------------------------------------------|
| Default: | 1 |
|-----------------+------------------------------------------|
| Type: | Read/Write |
|-----------------+------------------------------------------|
| In Stored | Yes |
| Profile?: | |
|-----------------+------------------------------------------|
| Description: | Bit Mapped Configuration Register |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+--------+----------------------------------------|
| 0 | 0 | Not used |
|----------+--------+----------------------------------------|
| 1 | 0 | Not used |
|----------+--------+----------------------------------------|
| 2 | 0 | Not used |
|----------+--------+----------------------------------------|
| 3 | 0 | Not used |
|----------+--------+----------------------------------------|
| 4 | 0 | Not used |
|----------+--------+----------------------------------------|
| 5 | 0 | Not used |
|----------+--------+----------------------------------------|
| 6 | í 1 | Enable: Bell 212A with 1200bps, Bell |
| | | 103 with 300bps (B1) |
| | 0 | |
| | | Enable: CCITT V.22 with 1200bps; V.21 |
| | | with 300bps (B0) |
|----------+--------+----------------------------------------|
| 7 | 0 | Not used |
+------------------------------------------------------------+
You are viewing proxied material from bitreich.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.