Introduction
Introduction Statistics Contact Development Disclaimer Help
View Source
# PERSTOR SYSTEMS, INC.
PS180-16FN
Data bus: 8-bit, ISA
Size: Full-length, full-height card
Hard drives supported: Two MFM or RLL ST506/ST412 drives or
one of each
Floppy drives supported: None
Maximum heads/cyl.: 15 heads and 1024 cylinders
IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-------------------------------------------+----------------|
| 34-pin control cable connector-hard drive | CN1 |
|-------------------------------------------+----------------|
| 20-pin data cable connector-drive 0 | CN3 |
|-------------------------------------------+----------------|
| 20-pin data cable connector-drive 1 | CN4 |
|-------------------------------------------+----------------|
| 34-pin control cable connector-hard drive | CN5 |
|-------------------------------------------+----------------|
| 4-pin connector-drive active LED | CN6 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS - ALL REVISIONS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------+--------------+--------------|
| » | BIOS enabled | JP1/jumper 1 | closed |
|---+--------------------------+--------------+--------------|
| | BIOS disabled | JP1/jumper 1 | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS - REVISION 1.3 ONLY |
|------------------------------------------------------------|
| Function | Location | Setting |
|---------------------------------------+----------+---------|
| » | Hard drive port address is | JP3 | closed |
| | 1F0-1F7h | | |
|---+-----------------------------------+----------+---------|
| | Hard drive port address is | JP3 | open |
| | 170-177h | | |
|---+-----------------------------------+----------+---------|
| » | Floppy drive enabled | JP6 | closed |
|---+-----------------------------------+----------+---------|
| | Floppy drive disabled | JP6 | open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS - REVISION 2.2 ONLY |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------------+----------+------------|
| » | Floppy drive port address is | JP4 | pins 1 & 2 |
| | 3F0-3F7h | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive port address is | JP4 | pins 2 & 3 |
| | 370-377h | | closed |
|---+--------------------------------+----------+------------|
| » | Hard drive port address is | JP8 | pins 1 & 2 |
| | 1F0-1F7h | | closed |
|---+--------------------------------+----------+------------|
| | Hard drive port address is | JP8 | pins 2 & 3 |
| | 170-177h | | closed |
|---+--------------------------------+----------+------------|
| » | Floppy drive enabled | JP13 | pins 1 & 2 |
| | | | closed |
|---+--------------------------------+----------+------------|
| | Floppy drive disabled | JP13 | pins 2 & 3 |
| | | | closed |
+------------------------------------------------------------+
+-------------------------------------------------------------+
| BIOS ADDRESS |
|-------------------------------------------------------------|
|Address|JP1/2 |JP1/3 |JP1/4 |JP1/5 |JP1/6 |JP1/7|JP1/8|JP1/9 |
|-------+------+------+------+------+------+-----+-----+------|
| C400h |closed| open |closed|closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CA00h | open |closed| open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CC00h |closed| open | open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CE00h | open | open | open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| D800h |closed|closed| open | open |closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| DC00h |closed| open | open | open |closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| DC00h | open | open | open | open |closed|open |open |closed|
+-------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| JP1/jumpers 2 through 9 are the BIOS address select. The |
| factory setting is C800 and is set with trace wires at |
| JP1/jumpers 2, 3, 5, 6, and 9. The BIOS address may be |
| changed by cutting the traces and closing other pins, |
| using the information in the table above. However any |
| modifications to the controller will void the warranty! |
+------------------------------------------------------------+
You are viewing proxied material from bitreich.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.