Introduction
Introduction Statistics Contact Development Disclaimer Help
View Source
# PERSTOR SYSTEMS INC.
ADRC-9008
Data bus: 8-bit, ISA
Size: Full-length, full-height card
Hard drives supported: Two MFM or RLL ST506/ST412 drives or
one of each
Floppy drives supported: None
Maximum heads/cyl.: 15 heads and 1024 cylinders
IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|----------------------------------------------+-------------|
| 34-pin control cable connector-hard drive | CN1 |
|----------------------------------------------+-------------|
| 20-pin data cable connector-drive 0 | CN2 |
|----------------------------------------------+-------------|
| 20-pin data cable connector-drive 1 | CN3 |
|----------------------------------------------+-------------|
| 4-pin connector-drive active LED | CN4 |
|----------------------------------------------+-------------|
| 5-pin connector-DC power | CN5 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|------------------------------+--------------+--------------|
| ยป | BIOS enabled | JP1 | closed |
|---+--------------------------+--------------+--------------|
| | BIOS disabled | JP1 | open |
+------------------------------------------------------------+
+-------------------------------------------------------------+
| BIOS ADDRESS |
|-------------------------------------------------------------|
|Address|JP1/2 |JP1/3 |JP1/4 |JP1/5 |JP1/6 |JP1/7|JP1/8|JP1/9 |
|-------+------+------+------+------+------+-----+-----+------|
| C400h |closed| open |closed|closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CA00h | open |closed| open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CC00h |closed| open | open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| CE00h | open | open | open |closed|closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| D800h |closed|closed| open | open |closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| DC00h |closed| open | open | open |closed|open |open |closed|
|-------+------+------+------+------+------+-----+-----+------|
| DC00h | open | open | open | open |closed|open |open |closed|
+-------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| JP1/2 through 9 are the BIOS address select. The factory |
| setting is C800 and is set with trace wires at JP1/jumpers |
| 2, 3, 5, 6, and 9. BIOS address may be changed by cutting |
| the traces and closing other pins, using the information |
| in the table above. However, any modifications to the |
| controller will void the warranty. |
+------------------------------------------------------------+
You are viewing proxied material from bitreich.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.