Introduction
Introduction Statistics Contact Development Disclaimer Help
View Source
# ADVANCED DIGITAL INFORMATION CORPORATION
BUSMASTER FAST-SCSI DCB-EISA
Data bus: 32-bit, EISA
Size: Full-length, full-height card
Hard drive Up to seven SCSI devices
supported:
Floppy drives Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
supported: drives
IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Location |
|-----------------------------------------------+------------|
| 4-pin-connector - drive active LED | J1 |
|-----------------------------------------------+------------|
| 34-pin control cable connector - floppy drive | J2 |
|-----------------------------------------------+------------|
| 50-pin SCSI connector - internal | J3 |
|-----------------------------------------------+------------|
| 50-pin SCSI connector - external | J4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Location | Setting |
|--------------------------------+-------------+-------------|
| ยป | Floppy drive enabled | W8 | closed |
|---+----------------------------+-------------+-------------|
| | Floppy drive disabled | W8 | open |
|---+----------------------------+-------------+-------------|
| | Floppy drive enabled | J3 | pins 41 & |
| | | | 42 closed |
|---+----------------------------+-------------+-------------|
| | Floppy drive disabled | J3 | pins 41 & |
| | | | 42 open |
|---+--------------------------------------------------------|
| | Note (1):The floppy drive controller can be enabled |
| | any one of three ways: |
| | |
| | (a) close jumper W8, or |
| | |
| | (b) close pins 41 & 42 of connector J3, or |
| | |
| | (c) select the floppy disk controller enabled option |
| | in the EISA configuration file. |
| | |
| | Note (2):To disable the floppy disk controller, all |
| | three of the above options must be disabled: |
| | |
| | (a) open jumper W8, and |
| | |
| | (b) open pins 41 & 42 of connector J3, and |
| | |
| | (c) select the floppy disk controller disabled option |
| | in the EISA configuration file. |
+------------------------------------------------------------+
You are viewing proxied material from bitreich.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.