The Project Gutenberg EBook of A Short List of Scientific Books Sept. 1909, by
E. Spon and F. N. Spon
This eBook is for the use of anyone anywhere in the United States and most
other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms of
the Project Gutenberg License included with this eBook or online at
www.gutenberg.org. If you are not located in the United States, you'll have
to check the laws of the country where you are located before using this ebook.
Title: A Short List of Scientific Books Sept. 1909
Author: E. Spon
F. N. Spon
Release Date: November 29, 2018 [EBook #58380]
Language: English
Character set encoding: UTF-8
*** START OF THIS PROJECT GUTENBERG EBOOK SCIENTIFIC BOOKS, SEPT. 1909 ***
Produced by Chris Curnow, Chris Jordan and the Online
Distributed Proofreading Team at
http://www.pgdp.net (This
file was produced from images generously made available
by The Internet Archive)
_September, 1909_
A SHORT LIST OF
SCIENTIFIC BOOKS
PUBLISHED AND SOLD BY
E. & F. N. SPON, Limited,
57 Haymarket, London, S.W.
SOLE ENGLISH AGENTS for the Books of—
MYRON C CLARK, NEW YORK
THE BUSINESS CODE COMPANY, CHICAGO
SPON & CHAMBERLAIN, NEW YORK
PAGE
Agriculture 2
Architecture 3
Artillery 5
Bridges and Roofs 5
Building 3
Cement and Concrete 7
Civil Engineering 8
Dictionaries 11
Domestic Economy 12
Drawing 13
Electrical Engineering 14
Foreign Exchange 19
Gas and Oil Engines 20
Gas Lighting 20
Historical; Biographical 21
Horology 22
Hydraulics 22
Industrial Chemistry 24
Irrigation 27
Logarithm Tables 28
Manufactures 24
Marine Engineering 28
Materials 30
Mathematics 31
Mechanical Engineering 33
Metallurgy 36
Metric Tables 38
Mineralogy and Mining 38
Municipal Engineering 45
Naval Architecture 28
Organisation 40
Physics 41
Price Books 42
Railway Engineering 43
Sanitation 45
Structural Design 5
Telegraph Codes 47
Warming; Ventilation 47
Water Supply 48
Workshop Practice 49
Useful Tables 52
Miscellaneous 53
_Full particulars post free on application.
All books are bound in cloth unless otherwise stated._
_NOTE_: _The Prices in this Catalogue apply to books sold in
the United Kingdom only._
AGRICULTURE.
=Hemp.= A Practical Treatise on the Culture of Hemp for Seed
and Fibre, with a Sketch of the History and Nature of the
Hemp Plant. By S. S. BOYCE. 13 illus. 112 pp. crown 8vo.
(_New York, 1900_) _net_ 2 0
=The Fertilisation of Tea.= By G. A. CONIE$1pp. crown 8vo,
sewed. (_1908_) _net_ 2 6
=Farm Drainage.= By H. F. FRENCH$1crown 8vo. (_New York,
1904_) _net_ 4 6
=Talks on Manures.= By J. HARRIS. New edition, 366 pp. crown
8vo. (_New York, 1893_) _net_ 6 6
=Coffee,= its Culture and Commerce in all Countries. By C. G.
W. LOCK. 11 plates, 274 pp. crown 8vo. (_1888_) 12 6
=Sugar, a Handbook for Planters and Refiners.= By the late J.
A. R. NEWLANDS and B. E. R. NEWLANDS. 236 illus. 876 pp. demy
8vo. (_London, 1909_) _net_ 1 5 0
=Hops,= their Cultivation, Commerce and Uses. By P. L.
SIMMONDS. 143 pp. crown 8vo. (_1877_) 4 6
=Tropical Agriculture.= By P. L. SIMMONDS. New edition, 539
pp. 8vo. (_1889_) 1 1 0
=The Future of Cocoa-Planting.= By H. HAMEL SMITH. With
illustrations, 95 pp. crown 8vo, sewed. (_1908_) _net_ 1 0
=Estate Fences,= their Choice, Construction and Cost. By A.
VERNON. Re-issue, 150 illus. 420 pp. 8vo. (_1909_) _net_ 8 6
ARCHITECTURE AND BUILDING.
=The Hydropathic Establishment and its Baths.= By R. O.
ALLSOP. 8 plates, 107 pp. demy 8vo. (_1891_) 5 0
=The Turkish Bath,= its Design and Construction. By R. O.
ALLSOP. 27 illus. 152 pp. demy 8vo. (_1890_) 6 0
=The Builder’s Clerk.= By T. BALES. Second edition, 92 pp.
fcap. 8vo. (_1904_) 1 6
=Glossary of Technical Terms= used in Architecture and the
Building Trades. By G. J. BURNS. 136 pp. crown 8vo. (_1895_) 3 6
=Chimney Design and Theory.= By W. W. CHRISTIE. Second
edition, 54 illus. 200 pp. crown 8vo. (_New York, 1902_)_net_ 12 6
=Approximate Estimates.= By T. E. COLEMAN. Third edition, 481
pp. oblong 32mo, leather. (_1907_) _net_ 5 0
=Stable Sanitation and Construction.= By T. E. COLEMAN. 183
illus. 226 pp. crown 8vo. (_1897_) 6 0
=Architectural Examples= in Brick, Stone, Wood and Iron. By
W. FULLERTON. Third edition, 245 plates, 254 pp. demy 4to.
(_1908_) _net_ 15 0
=Bricklaying System.= By F. B. GILBRETH. Fully illustrated,
321 pp. 8vo. (_New York, 1909_) _net_ 12 6
=The Building Trades Pocket Book.= Compiled by R. HALL. 12mo.
With interchangeable diary _net_ 1 6
Ditto ditto, in leather _net_ 2 6
=The Clerk of Works’ Vade Mecum.= By G. G. HOSKINS. Seventh
edition, 52 pp. fcap. 8vo. (_1901_) 1 6
=A Handbook of Formulæ, Tables, and Memoranda,= for
Architectural Surveyors and others engaged in Building. By
J. T. HURST. Fifteenth edition, 512 pp. royal 32mo, roan.
(_1905_) _net_ 5 0
=Quantity Surveying,= for the Use of Surveyors, Architects,
Engineers and Builders. By J. LEANING. Fifth edition, 936 pp.
demy 8vo. (_1904_) _net_ 1 5 0
=Obstruction to Light.= A Graphic Method of determining
Problems of Ancient Lights. By H. B. MOLESWORTH. 9 folding
plates, 4to. (_1902_) _net_ 6 0
=Suburban Houses.= A series of practical plans. By J. H.
PEARSON. 46 plates and 12 pp. text, crown 4to. (_1905_) _net_ 7 6
=Roman Architecture, Sculpture and Ornament.= By G. B.
PIRANESI. 200 plates, reproduced in facsimile from the
original. 2 vols. Imperial folio, in wrappers. (_1900_) _net_ 2 2 0
=The Seven Periods of English Architecture,= defined and
illustrated. By E. SHARPE. Third edition, 20 steel plates,
royal 8vo. (_1888_) 12 6
=Our Factories, Workshops and Warehouses,= their Sanitary and
Fire-Resisting Arrangements. By B. H. THWAITE. 183 illus. 282
pp. crown 8vo. 9 0
=Elementary Principles of Carpentry.= By T. TREDGOLD and J.
T. HURST. Eleventh edition, 48 plates, 517 pp. crown 8vo.
(_1904_) 12 6
=Practical Stair Building and Handrailing.= By W. H. WOOD. 32
plates, 91 pp. crown 4to. (_1894_) 10 6
=Spons’ Architects’ and Builders’ Pocket Price-Book,=
Memoranda, Tables and Prices. Edited by CLYDE YOUNG. Revised
by STANFORD M. BROOKS. Illustrated, 552 pp. 16mo, leather
cloth (size 6½ in. by 3¾ in. by ½ in. thick). Issued annually
_net_ 3 0
ARTILLERY.
=Guns and Gun Making Material.= By G. EDE. Crown 8vo.
(_1889_) 6 0
=Treatise on Application of Wire to Construction of
Ordnance.= By J. A. LONGRIDGE. 180 pp. 8vo. 1 5 0
=The Progress of Artillery: Naval Guns.= By J. A. LONGRIDGE.
8vo, sewed. (_1896_) 2 0
=The Field Gun of the Future.= By J. A. LONGRIDGE. 8vo,
sewed. (_1892_) 2 6
BRIDGES, ARCHES, ROOFS, AND STRUCTURAL DESIGN.
=Strains in Ironwork.= By HENRY ADAMS. Fourth edition, 8
plates, 65 pp. crown 8vo. (_1904_) 5 0
=The Practical Designing of Structural Ironwork.= By HENRY
ADAMS. 13 plates, 194 pp. 8vo. (_1894_) 8 6
=Designing Ironwork.= By HENRY ADAMS. Second series. 8vo,
sewed.
Part I. A Steel Box Girder. (_1894_) _net_ 0 9
" II. Built-up Steel Stanchions. (_1901_) _net_ 1 3
" III. Cisterns and Tanks. (_1902_) _net_ 1 0
" IV. A Fireproof Floor. (_1903_) _net_ 1 0
=A Practical Treatise on Segmental and Elliptical Oblique or
Skew Arches.= By G. J. BELL. Second edition, 17 plates, 125
pp. royal 8vo. (_1906_) _net_ 1 1 0
=Economics of Construction= in relation to Framed Structures.
By R. H. BOW. Third thousand, 16 plates, 88 pp. 8vo. (_1873_) 5 0
=Theory of Steel-Concrete Arches= and of Vaulted Structures.
By W. CAIN. Fourth edition, 27 illus. 212 pp. 18mo, boards.
(_New York, 1906_) _net_ 2 0
=Theory of Voussoir Arches.= By Prof. W. CAIN. Third edition,
201 pp. 18mo, boards. (_New York, 1905_) _net_ 2 0
=New Formulæ for the Loads and Deflections= of Solid Beams
and Girders. By W. DONALDSON. Second edition, 8vo. (_1872_) 4 6
=Plate Girder Railway Bridges.= By M. FITZMAURICE. 4 plates,
104 pp. 8vo. (_1895_) 6 0
=Pocket Book of Calculations= in Stresses. By E. M. GEORGE.
66 illus. 140 pp. royal 32mo, half roan. (_1895_) 3 6
=Strains on Braced Iron Arches= and Arched Iron Bridges. By
A. S. HEAFORD. 39 pp. 8vo. (_1883_) 6 0
=Tables for Roof Framing.= By G. D. INSKIP. Second edition,
451 pp. 8vo, leather. (_New York, 1905_) _net_ 12 6
=Stresses in Girder and Roof Frames,= for both dead and live
loads, by simple Multiplication, etc. By F. R. JOHNSON. 28
plates, 215 pp. crown 8vo. (_1894_) 6 0
=A Graphical Method for Swing Bridges.= By B. F. LA RUE. 4
plates, 104 pp. 18mo, boards. (_New York, 1892_) _net_ 2 0
=Notes on Cylinder Bridge Piers= and the Well System of
Foundations. By J. NEWMAN. 144 pp. 8vo. (_1893_) 6 0
=A New Method of Graphic Statics= applied in the Construction
of Wrought Iron Girders. By E. OLANDER. 16 plates, small
folio. (_1887_) 10 6
=Reference Book for Statical Calculations.= By F. RUFF. With
diagrams, 140 pp. crown 8vo. (_1906_) _net_ 5 0
=The Strength and Proportion of Riveted Joints.= By B. B.
STONEY. 87 pp. 8vo. (_1885_) 5 0
=The Anatomy of Bridgework.= By W. H. THORPE. 103 illus. 190
pp. crown 8vo. (_1906_) _net_ 6 0
CEMENT AND CONCRETE.
=Portland Cement=: its Manufacture, Testing and Use. By D. B.
BUTLER. Second edition, 97 illus. 396 pp. demy 8vo. (_1905_)
_net_ 16 0
=Cement Users’ and Buyers’ Guide.= By CALCARE. 115 pp. 32mo,
cloth. (_1901_) _net_ 1 6
=Cements, Mortars, and Concretes=; their Physical properties.
By M. S. FALK. 78 illus. 176 pp. 8vo. (_New York, 1904_)
_net_ 10 6
=Concrete Construction, Methods and Cost.= By H. P. GILLETTE
and C. S. HILL. 310 illus. 690 pp. 8vo. (_New York, 1908_)
_net_ 1 1 0
=Engineers’ Pocket-Book of Reinforced Concrete.= By E. L.
HEIDENREICH. 164 illus. 364 pp. crown 8vo, leather, gilt
edges. (_New York, 1909_) _net_ 12 6
=Reinforced Concrete.= By E. MCCULLOCH. 28 illus. 128 pp.
crown 8vo. (_New York, 1908_) _net_ 6 6
=Concrete and Reinforced Concrete.= By H. A. REID. 715 illus.
884 pp. royal 8vo. (_New York, 1907_) _net_ 21 0
=Theory and Design of Reinforced Concrete Arches.= By A.
REUTERDAHL. 41 illus. 126 pp. 8vo. (_New York, 1908_) _net_ 8 6
=Practical Cement Testing.= By W. P. TAYLOR. With 142 illus.
329 pp. demy 8vo. (_New York. 1906_) _net_ 12 6
CHEMISTRY.
(_See_ INDUSTRIAL CHEMISTRY.)
CIVIL ENGINEERING.
Canals, Surveying.
(_See also_ IRRIGATION _and_ WATER SUPPLY.)
=Levelling=, Barometric, Trigonometric and Spirit. By I. O.
BAKER. Second edition, 15 illus. 145 pp. 18mo, boards. (_New
York, 1908_) _net_ 2 0
=Notes on Instruments= best suited for Engineering Field Work
in India and the Colonies. By W. G. BLIGH. 65 illus. 218 pp.
8vo. (_1899_) 7 6
=The Sextant and other Reflecting Mathematical Instruments.=
By F. R. BRAINARD. 33 illus. 120 pp. 18mo, boards. (_New
York, 1891_) _net_ 2 0
=Practical Designing of Retaining Walls.= By Prof. W. CAIN.
Fifth edition, 14 illus. 172 pp. 18mo, boards. (_New York,
1908_) _net_ 2 0
=The Maintenance of Macadamised Roads.= By T. CODRINGTON.
Second edition, 186 pp. 8vo. (_1892_) 7 6
=Retaining Walls in Theory and Practice.= By T. E. COLEMAN.
104 illus. 160 pp. crown 8vo. (_1909_) _net_ 5 0
=The Barometrical Determination of Heights.= By F. J. B.
CORDEIRO. Crown 8vo, limp leather. (_New York, 1898_) _net_ 4 6
=On Curved Masonry Dams.= By W. B. COVENTRY. 8vo, sewed.
(_1894_) 2 0
=A Practical Method of Determining the Profile of a Masonry
Dam.= By W. B. COVENTRY. 8vo, sewed. (_1894_) 2 6
=The Stresses on Masonry Dams= (oblique sections). By W. B.
COVENTRY. 8vo, sewed. (_1894_) 2 0
=Tables for facilitating the Calculation of Earthworks.= By
D. CUNNINGHAM. 120 pp. royal 8vo. 10 6
=Handbook of Cost Data for Contractors and Engineers.= By H.
P. GILLETTE. 500 pp. crown 8vo, leather, gilt edges. (_New
York, 1904_) _net_ 17 0
=Rock Excavation, Methods and Cost.= By H. P. GILLETTE. 56
illus. 376 pp. crown 8vo. (_New York, 1904_) _net_ 12 6
=High Masonry Dams.= By E. S. GOULD. With illus. 88 pp. 18mo,
boards. (_New York, 1897_) _net_ 2 0
=Grace’s Tables for Curves=, with hints to young engineers. 8
figures, 43 pp. oblong 8vo. (_1908_) _net_ 5 0
=Grace’s Earthwork Tables.= 36 double-page tables, 4to.
(_1907_) _net_ 12 6
=Railway Tunnelling= in Heavy Ground. By C. GRIPPER. 3
plates, 66 pp. royal 8vo. (_1879_) 7 6
=Levelling and its General Application.= By T. HOLLOWAY.
Second edition, 53 illus. 147 pp. 8vo. (_1895_) 5 0
=Waterways and Water Transport= in different Countries. By J.
S. JEANS. 55 illus. 520 pp. 8vo. (_1890_) _net_ 9 0
=Table of Barometrical Heights to 20,000 Feet.= By W. H.
MACKESY, with some practical suggestions by Sir Guildford
Molesworth. 1 plate, 24 pp. royal 32mo. (_1882_) 3 0
=Aid Book to Engineering Enterprise.= By E. MATHESON. Third
edition, illustrated, 916 pp. medium 8vo, buckram. (_1898_) 1 4 0
=A Treatise on Surveying.= By R. E. MIDDLETON and O.
CHADWICK. Second edition, royal 8vo.
Part I. 11 plates, 296 pp. (_1904_) 10 6
" II. Fully illustrated, 334 pp. (_1906_) 10 6
=A Pocket Book of Useful Formulæ and Memoranda=, for Civil
and Mechanical Engineers. By Sir G. L. MOLESWORTH and H.
B. MOLESWORTH. With an Electrical Supplement by W. H.
MOLESWORTH. Twenty-sixth edition, 760 illus. 901 pp. royal
32mo, French morocco, gilt edges. (_1908_) _net_ 5 0
=The Pocket Books of Sir G. L. Molesworth and J. T. Hurst=,
printed on India paper and bound in one vol. Royal 32mo,
russia, gilt edges _net_ 10 6
=Metallic Structures: Corrosion and Fouling and their
Prevention.= By J. NEWMAN. Illustrated, 385 pp. crown 8vo.
(_1896_) 9 0
=Scamping Tricks and Odd Knowledge= occasionally practised
upon Public Works. By J. NEWMAN. New impression, 129 pp.
crown 8vo. (_1908_) _net_ 2 0
=Earthwork Slips and Subsidences= on Public Works. By J.
NEWMAN. 240 pp. crown 8vo. (_1890_) 7 6
=Co-ordinate Geometry= as applied to Land Surveying. By W.
PILKINGTON. 5 illus. 44 pp. 12mo. (_1909_) _net_ 1 6
=Diagrams for the Graphic Calculation of Earthwork
Quantities.= By A. H. ROBERTS. Ten cards, fcap. in cloth case
_net_ 10 6
=Pioneering.= By F. SHELFORD, illustrated. 88 pp. crown 8vo.
(_1909_) _net_ 3 0
=Topographical Surveying.= By G. J. SPECHT. Second edition, 2
plates and 28 illus. 210 pp. 18mo, boards. (_New York, 1898_)
_net_ 2 0
=Spons’ Dictionary of Engineering=, Civil, Mechanical,
Military and Naval. 10,000 illus. 4300 pp. super royal
8vo. (_1874, Supplement issued in 1881_).
Complete with Supplement, in 11 divisions _net_ 3 10 0
Ditto ditto in 4 vols. _net_ 3 3 0
=Surveying and Levelling Instruments.= By W. F. STANLEY.
Third edition, 372 illus. 562 pp. crown 8vo. (_1901_) 7 6
=Surveyor’s Handbook.= By T. U. TAYLOR. 116 illus. 310 pp.
crown 8vo, leather, gilt edges. (_New York, 1908_) _net_ 8 6
=Hints on Levelling Operations.= By W. H. WELLS. Second
edition, 8vo, sewed. (_1890_) 1 0
=The Drainage of Fens and Low Lands= by Gravitation and Steam
Power. By W. H. WHEELER. 8 plates, 175 pp. 8vo. (_1888_) 12 6
=Stadia Surveying=, the theory of Stadia Measurements. By A.
WINSLOW. Fifth edition, 148 pp. 18mo, boards. (_New York,
1902_) _net_ 2 0
=Handbook on Tacheometrical Surveying.= By C. XYDIS. 55
illus. 3 plates, 63 pp. 8vo. (_1909_) _net_ 6 0
DICTIONARIES.
=Technological Dictionary in the English, Spanish, German and
French Languages.= By D. CARLOS HUELIN Y ARSSU. Crown 8vo.
Vol. I. ENGLISH-SPANISH-GERMAN-FRENCH. 609 pp. (_1906_)
_net_ 10 6
Vol. II. GERMAN-ENGLISH-FRENCH-SPANISH. 720 pp. (_1908_)
_net_ 10 6
Vols. III. and IV. _In preparation._
=English-French and French-English Dictionary of the
Motor-Car, Cycle and Boat.= By F. LUCAS. 171 pp. crown 8vo.
(_1905_) _net_ 5 0
=Spanish-English Dictionary of Mining Terms.= By F. LUCAS. 78
pp. 8vo. (_1905_) _net_ 5 0
=English-Russian and Russian-English Engineering Dictionary.=
By L. MEYCLIAR. 100 pp. 16mo. (_1909_) _net_ 2 6
DOMESTIC ECONOMY.
=Food Adulteration and its Detection.= By J. P. BATTERSHALL.
12 plates, 328 pp. demy 8vo. (_New York, 1887_) 15 0
=How to Check Electricity Bills.= By S. W. BORDEN. 41 illus.
54 pp. crown 8vo. (_New York, 1907_) _net_ 2 0
=Practical Hints on Taking a House.= By H. P. BOULNOIS. 71
pp. 18mo. (_1885_) 1 6
=The Cooking Range=, its Failings and Remedies. By F. DYE. 52
pp. fcap. 8vo, sewed. (_1888_) 0 6
=The Kitchen Boiler and Water Pipes.= By H. GRIMSHAW. 8vo,
sewed. (_1887_) _net_ 1 0
=Cookery and Domestic Management=, including economic and
middle class Practical Cookery. By K. MELLISH. 56 coloured
plates and 441 illus. 987 pp. super-royal 8vo. (_1901_) _net_ 16 0
=Spons’ Household Manual.= 250 illus. 1043 pp. demy 8vo.
(_1902_) 7 6
Ditto ditto half-bound French morocco 9 0
=Handbook of Sanitary Information= for Householders. By R. S.
TRACY. 33 illus. 114 pp. 18mo. (_New York, 1900_) 2 6
DRAWING.
=The Ornamental Penman’s=, Engraver’s and Sign Writer’s
Pocket Book of Alphabets. By B. ALEXANDER. Oblong 12mo, sewed 0 6
=The Draughtsman’s Handbook= of Plan and Map Drawing. By G.
G. ANDRE. 87 illus. and 34 plain and coloured plates, 162 pp.
crown 4to. (_1891_) 9 0
=Slide Valve Diagrams=: a French Method for their
Construction. By L. BANKSON. 18mo, boards. (_New York, 1892_)
_net_ 2 0
=A System of Easy Lettering.= By J. H. CROMWELL. With
Supplement by G. MARTIN. Sixth thousand, oblong 8vo. (_New
York, 1900_) _net_ 2 0
=Plane Geometrical Drawing.= By R. C. FAWDRY. Illustrated,
185 pp. crown 8vo. (_1901_) _net_ 3 0
=Twelve Plates on Projection Drawing.= By O. GUETH. Oblong
4to. (_New York, 1903_) _net_ 3 0
=Hints on Architectural Draughtsmanship.= By G. W. T.
HALLATT. Fourth edition, 80 pp. 18mo. (_1906_) _net_ 1 6
=A First Course of Mechanical Drawing= (Tracing). By G.
HALLIDAY. Oblong 4to, sewed 2 0
=A Manual of Mechanical Drawing.= By P. D. JOHNSTON. 68
plates and 20 pp. squared paper, 149 pp. oblong 8vo. (_New
York, 1903_) _net_ 8 0
=Drawings for Medium-sized Repetition Work.= By R. D.
SPINNEY. With 47 illus. 130 pp. 8vo. (_1909_) _net_ 3 6
=Mathematical Drawing Instruments.= By W. F. STANLEY. Seventh
edition, 265 illus. 370 pp. crown 8vo. (_1900_) 5 0
ELECTRICAL ENGINEERING.
=Electric Bell Construction.= By F. C. ALLSOP. Second
edition, 177 illus. 143 pp. crown 8vo. (_1900_) 3 6
=Practical Electric Bell Fitting.= By F. C. ALLSOP. Tenth
edition, 186 illus. including 8 folding plates, 185 pp. crown
8vo. (_1903_) 3 6
=Telephones=: their Construction and Fitting. By F. C.
ALLSOP. Eighth edition, 184 illus. 222 pp. crown 8vo.
(_1909_) 3 6
=Thermo-electric Reactions= and Currents between Metals in
Fused Salts. By T. ANDREWS. 8vo, sewed. (_1896_) 1 0
=Auto-Transformer Design.= By A. H. AVERY. 25 illus. 60 pp.
8vo. (_1909_) _net_ 3 6
=Principles of Electric Power= (Continuous Current) for
Mechanical Engineers. By A. H. BATE. 63 illus. 204 pp. crown
8vo. (_1905_) (FINSBURY TECHNICAL MANUAL) _net_ 4 6
=Practical Construction of Electric Tramways.= By WILLIAM R.
BOWKER. 93 illus. 119 pp. 8vo. (_1903_) _net_ 6 0
=Design and Construction of Induction Coils.= By A. F.
COLLINS. 155 illus. 272 pp. demy 8vo. (_New York, 1909_)
_net_ 12 6
=Switchboard Measuring Instruments= for Continuous and
Polyphase Currents. By J. C. CONNAN. 117 illus. 150 pp. 8vo,
cloth. (_1908_) _net_ 5 0
=Management of Electrical Machinery.= By F. B. CROCKER and
S. S. WHEELER. Eighth edition, 131 illus. 223 pp. crown 8vo.
(_New York, 1909_) _net_ 4 6
=Electric Lighting=: A Practical Exposition of the Art. By F.
B. CROCKER. Royal 8vo. (_New York._)
Vol. I. =The Generating Plant.= Sixth edition, 213 illus.
470 pp. (_1904_) _net_ 12 6
Vol. II. =Distributing Systems and Lamps.= Second edition,
391 illus. 505 pp. (_1905_) _net_ 12 6
=Elementary Telegraphy and Telephony.= By ARTHUR CROTCH. 238
illus. 223 pp. 8vo. (_1903_) (FINSBURY TECHNICAL MANUAL)
_net_ 4 6
=Electricity and Magnetism in Telephone Maintenance.= By G.
W. CUMMINGS. 45 illus. 137 pp. 8vo. (_New York, 1908_) _net_ 6 6
=Grouping of Electric Cells.= By W. F. DUNTON. 4 illus. 50
pp. fcap. 8vo. (_1906_) _net_ 1 6
=Magnets and Electric Currents.= By Prof. J. A. FLEMING.
Second edition, 136 illus. 417 pp. crown 8vo. _net_ 5 0
=Notes on Design of Small Dynamo.= By GEORGE HALLIDAY. Second
edition, 8 plates, 8vo. (_1895_) 2 6
=Practical Alternating Currents and Power Transmission=. By
N. HARRISON. 172 illus. 375 pp. crown 8vo. (_New York, 1906_)
_net_ 10 6
=Making Wireless Outfits.= By N. HARRISON. 27 illus. 61 pp.
crown 8vo, limp. (_New York, 1909_) _net_ 1 6
=Wireless Telephone Construction.= By N. HARRISON. 43 illus.
73 pp. crown 8vo, limp. (_New York, 1909_) _net_ 1 6
=The Phœnix Fire Office Rules= for Electric Light and
Electrical Power Installations. By M. HEAPHY. Thirty-seventh
edition, 8vo, sewed. (_1908_) 0 6
=Testing Telegraph Cables.= By Colonel V. HOSKIŒR. Third
edition, crown 8vo. (_1889_) 4 6
=Electric Cables, their Construction and Cost.= By D. COYLE
and F. J. O. HOWE. With many diagrams and 216 tables, 464 pp.
crown 8vo, leather. (_In the Press._)
=Long Distance Electric Power Transmission.= By R. W.
HUTCHINSON. 136 illus. 345 pp. crown 8vo. (_New York, 1907_)
_net_ 12 6
=Theory and Practice of Electric Wiring.= By W. S. IBBETSON.
119 illus. 366 pp. crown 8vo. (_1909_) _net_ 5 0
=General Rules recommended for Wiring= for the Supply of
Electrical Energy. Issued by THE INSTITUTION OF ELECTRICAL
ENGINEERS. 8vo, sewed. (_Revised, April 1907_) _net_ 0 6
=Form of Model General Conditions= recommended by THE
INSTITUTION OF ELECTRICAL ENGINEERS for use in connection
with Electrical Contracts. 8vo, sewed. (_1906_) _net_ 1 0
=A Handbook of Electrical Testing.= By H. R. KEMPE. Seventh
edition, 285 illus. 706 pp. demy 8vo. (_1908_) _net_ 18 0
=Application of Electricity to Railway Working.= By W. E.
LANGDON. 142 illus. and 5 plates, 347 pp. 8vo. (_1897_) 10 6
=How to Become a Competent Motorman.= By V. B. LIVERMORE and
J. WILLIAMS. 45 illus. 252 pp. 12mo. (_New York, 1903_) _net_ 4 6
=Electromagnets=, their design and construction. By A. N.
MANSFIELD. 36 illus. 155 pp. 18mo, boards. (_New York, 1901_)
_net_ 6 6
=Telephone Construction, Methods and Cost.= By C. MAYER.
With Appendices on the cost of materials and labour by J.
C. SLIPPY. 103 illus. 284 pp. crown 8vo. (_New York, 1908_)
_net_ 12 6
=Induction Coils.= By N. H. SCHNEIDER. Second edition, 79
illus. 285 pp. crown 8vo. (_New York, 1901_) _net_ 4 6
=Electric Gas Lighting.= By N. H. SCHNEIDER. 57 illus. 101
pp. 12mo. (_New York, 1901_) _net_ 2 0
=How to Install Electric Bells, Annunciators and Alarms.=
By N. H. SCHNEIDER. 59 illus. 63 pp. crown 8vo, limp. (_New
York, 1905_) _net_ 1 6
=Modern Primary Batteries=, their construction, use and
maintenance. By N. H. SCHNEIDER. 54 illus. 94 pp. crown 8vo,
limp. (_New York, 1905_) _net_ 1 6
=Practical Engineers’ Handbook on the Care and Management of
Electric Power Plants.= By N. H. SCHNEIDER. 203 illus. 274
pp. crown 8vo. (_New York, 1906_) _net_ 5 0
=Electrical Circuits and Diagrams=, illustrated and
explained. By N. H. SCHNEIDER. 8vo, limp. (_New York_)
Part 1. 217 illus. 72 pp. (_1905_) _net_ 1 6
Part 2. 73 pp. (_1909_) _net_ 1 6
=Electrical Instruments and Testing.= By N. H. SCHNEIDER.
Third edition. 133 illus. 239 pp. crown 8vo. (_New York,
1907_) _net_ 4 6
=Experimenting with Induction Coils.= By N. H. SCHNEIDER. 26
illus. 73 pp. crown 8vo, limp. (_New York, 1906_) _net_ 1 6
=Study of Electricity for Beginners.= By N. H. SCHNEIDER. 54
illus. 88 pp. crown 8vo, limp. (_New York, 1905_) _net_ 1 6
=Practical Electrics=: a Universal Handybook on Every Day
Electrical Matters. Seventh edition, 126 illus. 135 pp. 8vo.
(_New York, 1902_) _net_ 1 6
=The Voltaic Accumulator=: an elementary treatise. By E.
REYNIER. Translated from the French by J. A. BERLY. 62 illus.
202 pp. 8vo. 9 0
=Dry Batteries=: how to Make and Use them. By a DRY BATTERY
EXPERT. With additional notes by N. H. SCHNEIDER. 30 illus.
59 pp. crown 8vo, sewed. (_New York, 1905_) _net_ 1 0
=The Diseases of Electrical Machinery.= By E. SCHULZ. Edited,
with a Preface, by Prof. S. P. THOMPSON. 42 illus. 84 pp.
crown 8vo. _net_ 2 0
=Electric Toy-Making.= By T. O. SLOANE. Fifteenth edition, 70
illus. 183 pp. crown 8vo. (_New York, 1903_) _net_ 4 6
=Electricity Simplified.= By T. O. SLOANE. Tenth edition, 29
illus. 158 pp. crown 8vo. (_New York, 1901_) _net_ 4 6
=How to become a Successful Electrician.= By T. O. SLOANE.
Third edition, illustrated, crown 8vo. (_New York, 1899_)
_net_ 4 6
=Electricity=: its Theory, Sources and Applications. By J.
T. SPRAGUE. Third edition, 109 illus. 658 pp. crown 8vo.
(_1892_) _net_ 7 6
=Telegraphic Connections.= By C. THOM and W. H. JONES. 20
plates, 59 pp. oblong 8vo. (_New York, 1892_) _net_ 3 6
=Röntgen Rays= and Phenomena of the Anode and Cathode. By E.
P. THOMPSON and W. A. ANTHONY. 105 illus. 204 pp. 8vo. (_New
York, 1896_) _net_ 4 6
=Dynamo Electric Machinery.= By Prof. S. P. THOMPSON. Seventh
edition, demy 8vo. (FINSBURY TECHNICAL MANUAL.)
Vol. I. =Continuous-Current Machinery.= With 4 coloured
and 30 folding plates, 573 illus. 984 pp. (_1904_) _net_ 1 10 0
Vol. II. =Alternating Current Machinery.= 15 coloured
and 24 folding plates, 546 illus. 900 pp. (_1905_) _net_ 1 10 0
=Design of Dynamos= (Continuous Currents). By Prof. S. P.
THOMPSON. 4 coloured and 8 folding plates, 243 pp. demy 8vo.
(_1903_) _net_ 12 0
=Schedule for Dynamo Design=, issued with the above. 6_d._
each, 4_s._ per doz., or 18_s._ per 100 _net_
=Curves of Magnetic Data for Various Materials.= A reprint
on transparent paper for office use of Plate L from Dynamo
Electric Machinery, and measuring 25 in. by 16 in. _net_ 0 7
=The Electromagnet.= By C. R. UNDERHILL. 67 illus. 159 pp.
crown 8vo. (_New York, 1903_) _net_ 6 6
=Practical Guide to the Testing of Insulated Wires and
Cables.= By H. L. WEBB. Fifth edition, 38 illus. 118 pp.
crown 8vo. (_New York, 1902_) _net_ 4 6
FOREIGN EXCHANGE.
=English Prices with Russian Equivalents.= By A. ADIASSEWICH.
182 pp. fcap. 32mo, roan. (_1908_) _net_ 1 0
=English Prices with German Equivalents.= English prices
per lb., with equivalents in marks per kilogramme. By ST.
KOCZOROWSKI. 95 pp. fcap. 32mo, roan. (_1909_) _net_ 1 0
=English Prices with French Equivalents.= English prices per
lb. to francs per kilogramme. By H. P. MCCARTNEY. 97 pp.
32mo, roan. (_1907_) _net_ 1 0
=Principles of Foreign Exchange.= By E. MATHESON. Fourth
edition, 54 pp. 8vo, sewed. (_1905_) _net_ 0 3
GAS AND OIL ENGINES.
=The Theory of the Gas Engine.= By D. CLERK. Edited by F. E.
IDELL. Third edition, 19 illus. 180 pp. 18mo, boards. (_New
York, 1903_) _net_ 2 0
=The Design and Construction of Oil Engines.= By A. H.
GOLDINGHAM. Second edition, 108 illus. 255 pp. crown 8vo.
(_New York, 1904_) _net_ 6 6
=Gas Engine in Principle and Practice.= By A. H. GOLDINGHAM.
107 illus. 195 pp. 8vo, cloth. (_New York, 1907_) _net_ 6 6
=Practical Hand-Book on the Care and Management of Gas
Engines.= By G. LIECKFELD. Third edition, square 16mo. (_New
York, 1896_) 3 6
=Elements of Gas Engine Design.= By S. A. MOSS. 197 pp. 18mo,
boards. (_New York, 1907_) _net_ 2 0
=Gas Engines and their Troubles.= By E. W. ROBERTS, with
chapters on the Design and Construction of Launches, by PROF.
W. F. DURAND. 38 illus. 143 pp. crown 8vo. (_New York, 1903_)
_net_ 4 6
=Gas and Petroleum Engines.= A Manual for Students and
Engineers. (FINSBURY TECHNICAL MANUAL.) By Prof. W. ROBINSON.
_Third edition in preparation_
GAS LIGHTING.
=Gas Analyst’s Manual= (incorporating Hartley’s “Gas
Analyst’s Manual” and “Gas Measurement”). By J. ABADY. 102
illustrations, 576 pp. demy 8vo. (_1902_) _net_ 18 0
=Gas Works=: their Arrangement, Construction, Plant and
Machinery. By F. COLYER. 31 folding plates, 134 pp. 8vo.
(_1884_) _net_ 8 6
=Transactions of the Institution of Gas Engineers.= Edited by
WALTER T. DUNN, _Secretary_. Published annually. 8vo. _net_ 10 6
=Lighting by Acetylene.= By F. DYE. 75 illus. 200 pp. crown
8vo. (_1902_) _net_ 6 0
=A Comparison of the English and French Methods of
Ascertaining the Illuminating Power of Coal Gas.= By A. J.
VAN EIJNDHOVEN. Illustrated, crown 8vo. (_1897_) 4 0
=Gas Lighting and Gas Fitting.= By W. P. GERHARD. Second
edition, 190 pp. 18mo, boards. (_New York, 1894_) _net_ 2 0
=A Treatise on the Comparative Commercial Values of Gas
Coals and Cannels.= By D. A. GRAHAM. 3 plates, 100 pp. 8vo.
(_1882_) 4 6
=The Gas Engineer’s Laboratory Handbook.= By J. HORNBY.
Second edition, 69 illus. 328 pp. crown 8vo. (_1902_) _net_ 6 0
HISTORICAL AND BIOGRAPHICAL.
=Extracts from the Private Letters of the late Sir William
Fothergill Cooke=, 1836-9, relating to the Invention and
Development of the Electric Telegraph; also a Memoir by
LATIMER CLARK. Edited by F. H. WEBB. Sec. Inst. E. E. 8vo.
(_1895_) 3 0
=A Chronology of Inland Navigation= in Great Britain. By H.
R. DE SALIS. Crown 8vo. (_1897_) 4 6
=A History of Electric Telegraphy= to the year 1837. By J. J.
FAHIE. 35 illus. 542 pp. crown 8vo. (_1889_) 2 0
=History and Development of Steam Locomotion on Common
Roads.= By W. FLETCHER. 109 illus. 288 pp. 8vo. 5 0
=Life as an Engineer=: its Lights, Shades, and Prospects.
By J. W. C. HALDANE. 23 plates, 338 pp. crown 8vo. (_1905_)
_net_ 5 0
=Philipp Reis=, Inventor of the Telephone: a Biographical
Sketch. By Prof. S. P. THOMPSON. 8vo, cloth. (_1883_) 7 6
=The Development of the Mercurial Air Pump.= By Prof. S. P.
THOMPSON. Illustrated, royal 8vo, sewed. (_1888_) 1 6
HOROLOGY.
=Watch and Clock Maker’s Handbook=, Dictionary and Guide. By
F. J. BRITTEN. Tenth edition, 450 illus. 492 pp. crown 8vo.
(_1902_) _net_ 5 0
=The Springing and Adjusting of Watches.= By F. J. BRITTEN.
75 illus. 152 pp. crown 8vo. (_1898_) _net_ 3 0
=Prize Essay on the Balance Spring= and its Isochronal
Adjustments. By M. IMMISCH. 7 illus. 50 pp. crown 8vo.
(_1872_) 2 6
HYDRAULICS AND HYDRAULIC MACHINERY.
(_See also_ WATER SUPPLY.)
=Pumps=: Historically, Theoretically and Practically
Considered. By P. R. BJÖRLING. Second edition, 156 illus. 234
pp. crown 8vo. (_1895_) 7 6
=Pump Details.= By P. R. BJÖRLING. 278 illus. 211 pp. crown
8vo. (_1892_) 7 6
=Pumps and Pump Motors=: A Manual for the use of Hydraulic
Engineers. By P. R. BJÖRLING. Two vols. 261 plates, 369 pp.
royal 4to. (_1895_) _net_ 1 10 0
=Practical Handbook on Pump Construction.= By P. R. BJÖRLING.
Second edition, 9 plates, 90 pp. crown 8vo. (_1904_) 5 0
=Water or Hydraulic Motors.= By P. R. BJÖRLING. 206 illus.
287 pp. crown 8vo. (_1903_) 9 0
=Hydraulic Machinery=, with an Introduction to Hydraulics.
By R. G. BLAINE. Second edition with 307 illus. 468 pp. 8vo.
(FINSBURY TECHNICAL MANUAL). (_1905_) _net_ 14 0
=Practical Hydraulics.= By T. BOX. Fifteenth edition, 8
plates, 88 pp. crown 8vo. (_1909_) _net_ 5 0
=Hydraulic, Steam, and Hand Power Lifting and Pressing
Machinery.= By F. COLYER. Second edition, 88 plates, 211 pp.
imperial 8vo. (_1892_) _net_ 10 6
=Pumps and Pumping Machinery.= By F. COLYER.
Vol. I. Second edition, 53 plates, 212 pp. 8vo. (_1892_)
_net_ 10 6
Vol. II. Second edition, 48 plates, 169 pp. 8vo. (_1900_)
_net_ 10 6
=Construction of Horizontal and Vertical Waterwheels.= By W.
CULLEN. Second edition, small 4to. (_1871_) 5 0
=Tables giving Hydraulic Mean Depth and Area of Circular
Sewers.= By R. DE SALIS. 8vo, sewed 1 0
=Donaldson’s Poncelet Turbine= and Water Pressure Engine and
Pump. By W. DONALDSON. 4to. (_1883_) 5 0
=Principles of Construction and Efficiency of Waterwheels.=
By W. DONALDSON. 13 illus. 94 pp. 8vo. (_1876_) 5 0
=Practical Hydrostatics and Hydrostatic Formulæ.= By E. S.
GOULD. 27 illus. 114 pp. 18mo, boards. (_New York, 1903_)
_net_ 2 0
=Hydraulic and other Tables= for purposes of Sewerage and
Water Supply. By T. HENNELL. Third edition, 70 pp. crown 8vo.
(_1908_) _net_ 4 6
=Hydraulic Tables= for finding the Mean Velocity and
Discharge in Open Channels. By T. HIGHAM. Second edition, 90
pp. super-royal 8vo. (_1898_) 7 6
=Tables for Calculating the Discharge of Water= in Pipes
for Water and Power Supplies. Indexed at side for ready
reference. By A. E. SILK. 63 pp. crown 8vo. (_1899_) 5 0
=Simple Hydraulic Formulæ.= By T. W. STONE. 9 plates, 98 pp.
crown 8vo. (_1881_) 4 0
INDUSTRIAL CHEMISTRY AND MANUFACTURES.
=Perfumes and their Preparation.= By G. W. ASKINSON.
Translated from the Third German Edition by I. FUEST. Third
edition, 32 illus. 312 pp. 8vo. (_New York, 1907_) _net_ 12 6
=Brewing Calculations=, Gauging and Tabulation. By C. H.
BATER. 340 pp. 64mo, roan, gilt edges. (_1897_) _net_ 1 6
=A Pocket Book for Chemists=, Chemical Manufacturers,
Metallurgists, Dyers, Distillers, etc. By T. BAYLEY. Seventh
edition, 550 pp. royal 32mo, roan, gilt edges _net_ 5 0
=Practical Receipts= for the Manufacturer, the Mechanic, and
for Home use. By Dr. H. R. BERKELEY and W. M. WALKER. 250 pp.
demy 8vo. (_1902_) _net_ 7 6
=A Treatise on the Manufacture of Soap and Candles=,
Lubricants and Glycerine. By W. L. CARPENTER and H. LEASK.
Second edition, 104 illus. 456 pp. crown 8vo. (_1895_) 12 6
=A Text Book of Paper Making.= By C. F. CROSS and E. J.
BEVAN. Third edition, 97 illus. 411 pp. crown 8vo. (_1907_)
_net_ 12 6
=C.B.S. Standard Units and Standard Paper Tests.= By C. F.
CROSS, E. J. BEVAN, C. BEADLE and R. W. SINDALL. 25 pp. crown
4to. (_1903_) _net_ 2 6
=Soda Fountain Requisites.= A Practical Receipt Book for
Druggists, Chemists, etc. By G. H. DUBELLE. Third edition,
157 pp. crown 8vo. (_New York, 1905_) _net_ 4 6
=The Chemistry of Fire= and Fire Prevention. By H. and H.
INGLE. 45 illus. 290 pp. crown 8vo. (_1900_) 9 0
=Ice-Making Machines.= By M. LEDOUX and others. Sixth
edition. 190 pp. 18mo, boards. (_New York, 1906_) _net_ 2 0
=Brewing with Raw Grain.= By T. W. LOVIBOND. 75 pp. crown
8vo. (_1883_) 5 0
=Sugar, a Handbook for Planters and Refiners.= By the late J.
A. R. NEWLANDS and B. E. R. NEWLANDS. 236 illus. 876 pp. demy
8vo. (_London, 1909_) _net_ 1 5 0
=Principles of Leather Manufacture.= By Prof. H. R. PROCTER.
101 illus. 520 pp. medium 8vo. _net_ 18 0
=Leather Industries Laboratory Handbook= of Analytical and
Experimental methods. By H. R. PROCTER. Second edition, 4
plates, 46 illus. 450 pp. demy 8vo. (_1908_) _net_ 18 0
=Theoretical and Practical Ammonia Refrigeration.= By I. I.
REDWOOD. Sixth thousand, 15 illus. 146 pp. square 16mo. (_New
York, 1909_) _net_ 4 6
=Breweries and Maltings.= By G. SCAMMELL and F. COLYER.
Second edition, 20 plates, 178 pp. 8vo. (_1880_) _net_ 6 0
=Factory Glazes for Ceramic Engineers.= By H. RUM-BELLOW.
Folio. Series A, Leadless Sanitary Glazes. (_1908_) _net_ 2 2 0
=Text Book of Physical Chemistry.= By C. L. SPEYERS. 224 pp.
demy 8vo. (_New York, 1898_) 9 0
=Spons’ Encyclopædia of the Industrial Arts=, Manufactures
and Commercial Products. 1500 illus. 2100 pp. super-royal 8vo.
In 2 Vols. cloth 3 10 0
=Pigments, Paints and Painting.= By G. TERRY. 49 illus. 392
pp. crown 8vo. (_1893_) 7 6
=Tables for the Quantitative Estimation of the Sugars.= By E.
WEIN and W. FREW. Crown 8vo. (_1896_) 6 0
=Workshop Receipts.= For the use of Manufacturers, Mechanics
and Scientific Amateurs. New and thoroughly revised edition,
crown 8vo. (_1909_) _each net_ 3 0
Vol. I. Acetylene Lighting _to_ Drying. 223 illus.
532 pp.
Vol. II. Dyeing _to_ Japanning. 259 illus. 540 pp.
Vol. III. Jointing Pipes _to_ Pumps.
Vol. IV.
=Practical Handbook on the Distillation of Alcohol from Farm
Products.= By F. B. WRIGHT. Second edition, 60 illus. 271 pp.
crown 8vo. (_New York, 1907_) _net_ 4 6
=The Manufacture of Chocolate= and other Cacao Preparations.
By P. ZIPPERER. Second edition, 87 illus. 280 pp. royal 8vo.
(_1902_) _net_ 16 0
IRRIGATION.
=The Irrigation Works of India.= By R. B. BUCKLEY. Second
edition, with coloured maps and plans. 336 pp. 4to, cloth.
(_1905_) _net_ 2 2 0
=Facts, Figures, and Formulæ for Irrigation Engineers.= By R.
B. BUCKLEY. With illus. 239 pp. large 8vo. (_1908_) _net_ 10 6
=Irrigated India.= By Hon. ALFRED DEAKIN. With Map, 322 pp.
8vo. (_1893_) 8 6
=Indian Storage Reservoirs=, with Earthen Dams. By W. L.
STRANGE. 14 plates and 53 illus. 379 pp. demy 8vo. (_1904_)
_net_ 1 1 0
=Irrigation Farming.= By L. M. WILCOX. Revised edition, 113
illus. 494 pp. crown 8vo. (_New York_) _net_ 8 6
=Egyptian Irrigation.= By Sir W. WILLCOCKS. Second edition
out of Print.
_A few copies of the First Edition (1889) are still to
be had. Price 15s. net._
=The Nile Reservoir Dam at Assuân=, and After. By Sir W.
WILLCOCKS. Second edition, 13 plates, super-royal 8vo.
(_1903_) _net_ 6 0
=The Assuân Reservoir and Lake Moeris.= By Sir W. WILLCOCKS.
With text in English, French and Arabic. 5 plates, 116 pp.
super-royal 8vo. (_1904_) _net_ 5 0
=The Nile in 1904.= By Sir W. WILLCOCKS. 30 plates, 200 pp.
super-royal 8vo. (_1904_) _net_ 9 0
LOGARITHM TABLES.
=Aldum’s Pocket Folding Mathematical Tables.= Four-figure
logarithms, and Anti-logarithms, Natural Sines, Tangents,
Cotangents, Cosines, Chords and Radians for all angles from 1
to 90 degrees. On folding card. _Net 4d._ 20 copies, _net 6s._
=Tables of Seven-figure Logarithms= of the Natural Numbers
from 1 to 108,000. By C. BABBAGE. Stereotype edition, 8vo. 7 6
=Short Logarithmic= and other Tables. By W. C. UNWIN. Fourth
edition, small 4to 3 0
=A. B. C. Five-figure Logarithms= for general use, with
lateral index for ready reference. By C. J. WOODWARD. Second
edition, with cut lateral Index, 116 pp. 12mo, limp leather
_net_ 3 0
MARINE ENGINEERING AND NAVAL ARCHITECTURE.
=Marine Propellers.= By S. W. BARNABY. Fifth edition, 5
plates, 56 illus. 185 pp. demy 8vo. (_1908_) _net_ 10 6
=Marine Engineer’s Record Book=: Engines. By B. C. BARTLEY.
8vo, roan _net_ 5 0
=The Engineer’s and Draughtsman’s Data Book= for Workshop and
Office Use. Third edition, crown 8vo, roan 3 0
=Yachting Hints=, Tables and Memoranda. By A. C. FRANKLIN.
Waistcoat pocket size, 103 pp. 64mo, roan, gilt edges _net_ 1 0
Ditto ditto in celluloid case _net_ 1 6
=Steamship Coefficients, Speeds and Powers.= By C. F. A.
FYFE. 31 plates, 280 pp. fcap. 8vo, leather. (_1907_) _net_ 10 6
=Steamships and Their Machinery=, from first to last. By J.
W. C. HALDANE. 120 illus. 532 pp. 8vo. (_1893_) 15 0
=Tables for Constructing Ships’ Lines.= By A. HOGG. Second
edition, 8vo. 7 0
=Submarine Boats.= By G. W. HOVGAARD. 2 plates, 98 pp. crown
8vo. (_1887_) 5 0
=Tabulated Weights= of Angle, Tee, Bulb, Round, Square,
and Flat Iron and Steel for the use of Naval Architects,
Ship-builders, etc. By C. H. JORDAN. Fifth edition, 579 pp.
royal 32mo, French morocco, gilt edges. (_1896_) 7 6
=Particulars of Dry Docks=, Wet Docks, Wharves, etc. on the
River Thames. Compiled by C. H. JORDAN. Second edition, 7
coloured charts, 103 pp. oblong 8vo. (_1904_) _net_ 2 6
=Marine Transport of Petroleum.= By H. LITTLE. 66 illus. 263
pp. crown 8vo. (_1890_) 10 6
=Questions and Answers for Marine Engineers=, with a
Practical Treatise on Breakdowns at Sea. By T. LUCAS. 12
folding plates, 515 pp. gilt edges, crown 8vo. (_New York,
1902_) _net_ 8 0
=Reed’s Examination Papers for Extra First Class Engineers.=
Fourth edition, 14 plates and 188 illus. 550 pp. 8vo.
(_1902_) _net_ 18 0
=Reed’s Engineers’ Handbook to the Board of Trade
Examinations= for certificates of Competency as First and
Second Class Engineers. Nineteenth edition, 37 plates, 358
illus. 696 pp. 8vo. _net_ 14 0
=Reed’s Polyglot Guide to the Marine Engine=, in English,
French, German and Norsk. Second edition, oblong 8vo.
(_1900_) _net_ 6 0
=Reed’s Marine Boilers.= Second edition, crown 8vo. _net_ 4 6
=Reed’s Useful Hints to Sea-going Engineers.= Fourth edition,
8 plates, 50 illus. 312 pp. crown 8vo. (_1903_) _net_ 3 6
=Naval Architects’ and Engineers’ Data Book.= By T. H.
WATSON. Fcap. 8vo, cloth _net_ 3 6
MATERIALS.
=Practical Treatise on the Strength of Materials.= By T. BOX.
Fourth edition, 27 plates, 536 pp. 8vo. (_1902_) _net_ 12 6
=Treatise on the Origin, Progress, Prevention and Cure of Dry
Rot in Timber.= By T. A. BRITTON. 10 plates, 519 pp. crown
8vo. (_1875_) 7 6
=Twenty Years’ Practical Experience of Natural Asphalt= and
Mineral Bitumen. By W. H. DELANO. 33 illus. 73 pp. crown 8vo,
parchment. (_1893_) 2 0
=Stone=: how to get it and how to use it. By Major-Gen. C. E.
LUARD, R.E. 8vo, sewed. (_1890_) 2 0
=Testing of Pipes= and Pipe-joints in the Open Trenches. By
M. M. PATERSON. 8vo, sewed (_1879_) 2 0
=Lubricants, Oils and Greases.= By I. I. REDWOOD. 3 plates,
8vo. (_1898_) 4 6
=Practical Treatise on Mineral Oils= and their By-Products.
By I. I. REDWOOD. 67 illus. 336 pp. demy 8vo. (_1897_) 15 0
=Silico-Calcareous Sandstones=, or Building Stones from
Quartz, Sand and Lime. By E. STOFFLER. 5 plates, 8vo, sewed.
(_1901_) _net_ 4 0
=Proceedings of the International Association for Testing
Materials.= English edition. Issued irregularly. Price varies.
MATHEMATICS.
=Imaginary Quantities.= By M. ARGAND. Translated by PROF.
HARDY. 18mo, boards. (_New York_) _net_ 2 0
=Text Book of Practical Solid Geometry.= By E. H. DE V.
ATKINSON. Revised by MAJOR B. R. WARD, R.E. Second edition,
17 plates, 8vo. (_1901_) 7 6
=Quick and Easy Methods of Calculating=, and the Theory and
Use of the Slide Rule. By R. G. BLAINE. Third edition, 6
illus. 152 pp. 16mo, leather cloth. (_1907_) 2 6
=Symbolic Algebra=, or the Algebra of Algebraic Numbers. By
W. CAIN. 18mo, boards. (_New York_) _net_ 2 0
=Nautical Astronomy.= By J. H. COLVIN. 127 pp. crown, 8vo.
(_1901_) _net_ 2 6
=Chemical Problems.= By J. C. FOYE. Fourth edition, 141 pp.
18mo, boards. (_New York, 1898_) _net_ 2 0
=Primer of the Calculus.= By E. S. GOULD. Second edition, 24
illus. 122 pp. 18mo, boards. (_New York, 1899_) _net_ 2 0
=Elementary Treatise on the Calculus= for Engineering
Students. By J. GRAHAM. Third edition, 276 pp. crown 8vo.
(_1905_). (FINSBURY TECHNICAL MANUAL) 7 6
=Manual of the Slide Rule.= By F. A. HALSEY. Second edition,
31 illus. 84 pp. 18mo, boards. (_New York, 1901_) _net_ 2 0
=Reform in Chemical and Physical Calculations.= By C. J. T.
HANSSEN. 4to. (_1897_) _net_ 6 6
=Algebra Self-Taught.= By P. HIGGS. Third edition, 104 pp.
crown 8vo. (_1903_) 2 6
=Galvanic Circuit investigated Mathematically.= By G. S. OHM.
Translated by WILLIAM FRANCIS. 269 pp. 18mo, boards. (_New
York, 1891_) _net_ 2 0
=Elementary Practical Mathematics.= By M. T. ORMSBY. 420 pp.
demy 8vo. (_1900_) _net_ 7 6
=Elements of Graphic Statics.= By K. VON OTT. Translated by
G. S. CLARKE. 93 illus. 128 pp. crown 8vo. (_1901_) 5 0
=Figure of the Earth.= By F. C. ROBERTS. 18mo, boards. (_New
York_) _net_ 2 0
=Arithmetic of Electricity.= By T. O’C. SLOANE. Thirteenth
edition, crown 8vo. (_New York, 1901_) _net_ 4 6
=Graphic Method for Solving certain Questions in Arithmetic
or Algebra.= By G. L. VOSE. Second edition with 28 illus. 62
pp. 18mo, boards. (_New York, 1902_) _net_ 2 0
=Problems in Electricity.= A Graduated Collection comprising
all branches of Electrical Science. By R. WEBER. Translated
from the French by E. A. O’KEEFE. 34 illus. 366 pp. crown
8vo. (_1902_) _net_ 7 6
MECHANICAL ENGINEERING.
Steam Engines and Boilers, etc.
=Handbook for Mechanical Engineers.= By HY. ADAMS. Fourth
edition, 426 pp. crown 8vo. (_1897_) _net_ 4 6
=Appleby’s Handbooks of Machinery.= Many illustrations, 8vo.
Sections 2, 3, 4 and 6 _each_ 3 6
Section 5 5 0
Section 1.—Prime Movers. _Out of Print._
Section 2.—Hoisting Machinery, Winding Engines, etc.
Section 3.—Pumping Machinery and Pumping Engines.
Section 4.—Machine Tools and Accessories.
Section 5.—Contractors’ Plant and Railway Materials.
Section 6.—Mining, Colonial and Manufacturing Machinery.
=Engineers’ Sketch Book of Mechanical Movements.= By T. W.
BARBER. Fifth edition, 3000 illus. 355 pp. 8vo. (_1906_)
_net_ 10 6
=The Repair and Maintenance of Machinery.= By T. W. BARBER.
417 illus. 476 pp. 8vo. (_1895_) 10 6
=Slide Valve and its Functions=, with special reference to
Modern Practice in the United States. By J. BEGTRUP. 90
diagrams, 146 pp. medium 8vo. (_New York, 1902_) _net_ 8 0
=Practical Treatise on Mill Gearing.= By T. BOX. Fifth
edition, 11 plates, 128 pp. crown 8vo. (_1892_) 7 6
=Safety Valves.= By R. H. BUELL. Third edition, 20 illus. 100
pp. 18mo, boards. (_New York, 1898_) _net_ 2 0
=Machine Design.= By Prof. W. L. CATHCART.
Part I. Fastenings. 123 illus. 291 pp. demy 8vo.
(_New York, 1903_) _net_ 12 6
=Chimney Design and Theory.= By W. W. CHRISTIE. Second
edition, 54 illus. 192 pp. crown 8vo. (_New York, 1902_)
_net_ 12 6
=Furnace Draft=: its Production by Mechanical Methods. By W.
W. CHRISTIE. 5 illus. 80 pp. 18mo, boards. (_New York, 1906_)
_net_ 2 0
=Working and Management of Steam Boilers and Engines.= By F.
COLYER. Second edition, 108 pp. crown 8vo. (_1902_) 3 6
=The Stokers’ Catechism.= By W. J. CONNOR. 63 pp. limp cloth.
(_1906_) _net_ 1 0
=Treatise on the use of Belting= for the Transmission of
Power. By J. H. COOPER. Fifth edition, 94 illus. 399 pp. demy
8vo. (_New York, 1901_) _net_ 12 6
=The Steam Engine considered as a Thermodynamic Machine.= By
J. H. COTTERILL. Third edition, 39 diagrams, 444 pp. 8vo.
(_1896_) 15 0
=Fireman’s Guide=, a Handbook on the Care of Boilers. By K.
P. DAHLSTROM. Ninth edition fcap. 8vo. (_New York, 1902_)
_net_ 1 6
=Diseases of a Gasolene Automobile=, and How to Cure Them. By
A. L. DYKE and G. P. DORRIS. 127 illus. 201 pp. crown 8vo.
(_New York, 1903_) _net_ 6 6
=Belt Driving.= By G. HALLIDAY. 3 folding plates, 100 pp.
8vo. (_1894_) 3 6
=Worm and Spiral Gearing.= By F. A. HALSEY. 13 plates, 85 pp.
18mo, boards. (_New York_) _net_ 2 0
=Commercial Efficiency of Steam Boilers.= By A. HANSSEN.
Large 8vo, sewed. (_1898_) 0 6
=Corliss Engine.= By J. T. HENTHORN. Third edition, 23 illus.
95 pp. square 16mo. (_New York, 1904_) 3 6
=Liquid Fuel= for Mechanical and Industrial Purposes. By E.
A. BRAYLEY HODGETTS. 106 illus. 129 pp. 8vo. (_1890_) 5 0
=Elementary Text-Book on Steam Engines and Boilers.= By J. H.
KINEALY. Fourth edition, 106 illus. 259 pp. 8vo. (_New York,
1903_) _net_ 8 6
=Centrifugal Fans.= By J. H. KINEALY. 33 illus. 206 pp. fcap.
8vo, leather. (_New York, 1905_) _net_ 12 6
=Mechanical Draft.= By J. H. KINEALY. 27 original tables and
13 plates, 142 pp. crown 8vo. (_New York, 1906_) _net_ 8 6
=The A. B. C. of the Steam Engine=, with a description of
the Automatic Governor. By J. P. LISK. 6 plates, 12mo. (_New
York, 1902_) _net_ 2 0
=Valve Setting Record Book.= By P. A. LOW. 8vo, boards 1 6
=The Lay-out of Corliss Valve Gears.= By S. A. MOSS. Second
edition, 3 plates, 108 pp. 18mo, boards. (_New York, 1906_)
_net_ 2 0
=Steam Boilers=, their Management and Working. By J. PEATTIE.
Fifth edition, 35 illus. 230 pp. crown 8vo. (_1906_) _net_ 4 6
=Treatise on the Richards Steam Engine Indicator.= By C. T.
PORTER. Sixth edition, 3 plates and 73 diagrams, 285 pp. 8vo.
(_1902_) 9 0
=Practical Treatise on the Steam Engine.= By A. RIGG. Second
edition, 103 plates, 378 pp. demy 4to. (_1894_) 1 5 0
=Slide Valve Simply Explained.= By W. J. TENNANT. Revised by
J. H. KINEALY. 41 illus. 83 pp. crown 8vo. (_New York, 1899_)
_net_ 4 6
=Shaft Governors.= By W. TRINKS and C. HOOSUM. 27 illus. 97
pp. 18mo, boards. (_New York, 1905_) _net_ 2 0
=Slide and Piston Valve Geared Steam Engines.= By W. H.
UHLAND. 47 plates and 314 illus. 155 pp. Two vols. folio,
half morocco. (_1882_) 1 16 0
=How to run Engines and Boilers.= By E. P. WATSON. Fifth
edition, 31 illus. 160 pp. crown 8vo. (_New York, 1904_) 3 6
=Position Diagram of Cylinder with Meyer Cut-off.= By W. H.
WEIGHTMAN. On card. (_New York_) _net_ 1 0
=Practical Method of Designing Slide Valve Gearing.= By E. J.
WELCH. 69 diagrams, 283 pp. Crown 8vo. (_1890_) 6 0
=Elements of Mechanics.= By T. W. WRIGHT. Illustrated, 372
pp. 8vo. (_New York, 1896_) 10 6
METALLURGY.
Iron and Steel Manufacture.
=Life of Railway Axles.= By T. ANDREWS. 8vo, sewed. (_1895_) 1 0
=Microscopic Internal Flaws in Steel Rails and Propeller
Shafts.= By T. ANDREWS. 8vo, sewed. (_1896_) 1 0
=Microscopic Internal Flaws, Inducing Fracture in Steel.= By
T. ANDREWS. 8vo, sewed. (_1896_) 2 0
=Relations between the Effects of Stresses= slowly applied
and of Stresses suddenly applied in the case of Iron and
Steel: Comparative Tests with Notched and Plain Bars. By P.
BREUIL. 23 plates and 60 illus. 151 pp. 8vo. (_1904_) _net_ 8 0
=Brassfounders’ Alloys.= By J. F. BUCHANAN. Illustrated, 129
pp. crown 8vo. (_1905_) _net_ 4 6
=Foundry Nomenclature.= The Moulder’s Pocket Dictionary and
concise guide to Foundry Practice. By JOHN F. BUCHANAN.
Illustrated, 225 pp. crown 8vo. (_1903_) _net_ 5 0
=American Standard Specifications for Steel.= By A. L. COLBY.
Second edition, revised, 103 pp. crown 8vo. (_New York,
1902_) _net_ 5 0
=Galvanised Iron=: its Manufacture and Uses. By J. DAVIES.
139 pp. 8vo. (_1899_) _net_ 5 0
=Management of Steel.= By G. EDE. Seventh edition, 216 pp.
crown 8vo. (_1903_) 5 0
=Galvanising and Tinning=, with a special Chapter on Tinning
Grey Iron Castings. By W. T. FLANDERS. 8vo. (_New York_)
_net_ 8 6
=Cupola Furnace.= A practical treatise on the Construction
and Management of Foundry Cupolas. By E. KIRK. Second
edition, 78 illus. 450 pp. demy 8vo. (_New York, 1903_) _net_ 15 0
=Practical Notes on Pipe Founding.= By J. W. MACFARLANE. 15
plates, 148 pp. 8vo. 12 6
=Atlas of Designs concerning Blast Furnace Practice.= By M.
A. PAVLOFF. 127 plates, 14 in. by 10½ in. oblong, sewed.
(_1902_) _net_ 1 1 0
=Album of Drawings relating to the Manufacture of Open Hearth
Steel.= By M. A. PAVLOFF.
Part I. Open Hearth Furnaces. 52 plates, 14 in. by 10½ in.
oblong folio in portfolio. (_1904_) _net_ 12 0
=Modern Foundry Practice.= Including revised subject matter
and tables from SPRETSON’S “Casting and Founding.” By J.
SHARP. Second edition, 272 illus. 759 pp. 8vo. (_1905_) _net_ 1 1 0
=Roll Turning for Sections in Steel and Iron.= By A. SPENCER.
Second edition, 78 plates, 4to. (_1894_) 1 10 0
METRIC TABLES.
=French Measure and English Equivalents.= By J. BROOK. Second
edition, 80 pp. fcap. 32mo, roan. (_1906_) _net_ 1 0
=A Dictionary of Metric= and other useful Measures. By L.
CLARK. 113 pp. 8vo. (_1891_) 6 0
=English Weights, with their Equivalents in kilogrammes per
cent.= By F. W. A. LOGAN. 96 pp. fcap. 32mo, roan. (_1906_)
_net_ 1 0
=Metric Weights with English Equivalents.= By H. P.
MCCARTNEY. 84 pp. fcap. 32mo. (_1907_) _net_ 1 0
=Metric Tables.= By Sir G. L. MOLESWORTH. Fourth edition, 95
pp. royal 32mo. (_1909_) _net_ 2 0
=Tables for Setting out Curves= from 200 metres to 4000
metres by tangential angles. By H. WILLIAMSON. 4 illus. 60
pp. 18mo. (_1908_) _net_ 2 0
MINERALOGY AND MINING.
=Rock Blasting.= By G. G. ANDRE. 12 plates and 56 illus. in
text, 202 pp. 8vo. (_1878_) 5 0
=Winding Plants for Great Depth.= By H. C. BEHR. In two
parts. 8vo, sewed. (_1902_) _net_ 2 2 0
=Practical Treatise on Hydraulic Mining in California.= By A.
J. BOWIE, Jun. Tenth edition, 73 illus. 313 pp. royal 8vo.
(_New York, 1905_) _net_ 1 1 0
=Manual of Assaying Gold, Silver, Copper and Lead Ores.= By
W. L. BROWN. Twelfth edition, 132 illus. 589 pp. crown 8vo.
(_New York, 1907_) _net_ 10 6
=Fire Assaying.= By E. W. BUSKETT. 69 illus. 105 pp. crown
8vo. (_New York, 1907_) _net_ 4 6
=Tin=: Describing the Chief Methods of Mining, Dressing, etc.
By A. G. CHARLETON. 15 plates, 83 pp. crown 8vo. (_1884_) 12 6
=Gold Mining and Milling= in Western Australia, with Notes
upon Telluride Treatment, Costs and Mining Practice in other
Fields. By A. G. CHARLETON. 82 illus. and numerous plans and
tables, 648 pp. super-royal 8vo. (_1903_) _net_ 1 5 0
=Miners’ Geology and Prospectors’ Guide.= By G. A. CORDER. 29
plates, 224 pp. crown 8vo. (_1907_) _net_ 5 0
=Blasting of Rock in Mines, Quarries, Tunnels, etc.= By A. W.
and Z. W. DAW. Second edition, 90 illus. 316 pp. demy 8vo.
(_1909_) _net_ 15 0
=Handbook of Mineralogy=; determination and description of
Minerals found in the United States. By J. C. FOYE. 18mo,
boards. (_New York, 1886_) _net_ 2 0
=Conversations on Mines.= By W. HOPTON. Ninth edition, 33
illus. 356 pp. crown 8vo. (_1891_) 4 6
=Our Coal Resources= at the End of the Nineteenth Century. By
Prof. E. HULL. 157 pp. demy 8vo. (_1897_) 6 0
=Simple Rules for the Discrimination of Gems.= By T. S. G.
KIRKPATRICK. 16mo, leather. (_1895_) 2 0
=Hydraulic Gold Miners’ Manual.= By T. S. G. KIRKPATRICK.
Second edition, 12 illus. 46 pp. crown 8vo. (_1897_) 4 0
=Economic Mining.= By C. G. W. LOCK. 175 illus. 680 pp. 8vo.
(_1895_) _net_ 10 6
=Gold Milling=: Principles and Practice. By C. G. W. LOCK.
200 illus. 850 pp. demy 8vo. (_1901_) _net_ 1 1 0
=Mining and Ore-Dressing Machinery.= By C. G. W. LOCK. 639
illus. 466 pp. super-royal 4to. (_1890_) 1 5 0
=Miners’ Pocket Book.= By C. G. W. LOCK. Fifth edition, 233
illus. 624 pp. fcap. 8vo, roan, gilt edges. (_1908_) _net_ 10 6
=Tests for Ores, Minerals and Metals of Commercial Value.= By
R. L. MCMECHEN. 152 pp. 12mo. (_New York, 1907_) _net_ 5 6
=Practical Handbook for the Working Miner and Prospector=,
and the Mining Investor. By J. A. MILLER. 34 illus. 234 pp.
crown 8vo. (_1897_) 7 6
=Theory and Practice of Centrifugal Ventilating Machines.= By
D. MURGUE. 7 illus. 81 pp. 8vo. (_1883_) 5 0
=Examples of Coal Mining Plant.= By J. POVEY-HARPER. Second
edition, 40 plates, 26 in. by 20 in. (_1895_) _net_ 4 4 0
=Examples of Coal Mining Plant, Second Series.= By J.
POVEY-HARPER. 10 plates, 26 in. by 20 in. (_1902_) _net_ 1 12 6
ORGANISATION.
Accounts, Contracts and Management.
=Organisation of Gold Mining Business=, with Specimens of the
Departmental Report Books and the Account Books. By NICOL
BROWN. Second edition, 220 pp. fcap. folio. (_1903_) _net_ 1 5 0
=Manual of Engineering Specifications= and Contracts. By L.
M. HAUPT. Eighth edition, 338 pp. 8vo. (_New York, 1900_)
_net_ 12 6
=Depreciation of Factories=, Mines, and Industrial
Undertakings, and their Valuation. By E. MATHESON. _Fourth
edition in the Press._
=Aid Book to Engineering Enterprise.= By E. MATHESON. Third
edition, 916 pp. 8vo, buckram. (_1898_) 1 4 0
=Office Management.= A handbook for Architects and Civil
Engineers. By W. KAYE PARRY. New impression, 187 pp. medium
8vo. (_1908_) _net_ 5 0
=Commercial Organisation of Engineering Factories.= By H.
SPENCER. 92 illus. 221 pp. 8vo. (_1907_) _net_ 10 6
PHYSICS.
Colour, Heat and Experimental Science.
=The Entropy Diagram= and its Applications. By M. J. BOULVIN.
38 illus. 82 pp. demy 8vo. (_1898_) 5 0
=Physical Problems and their Solution.= By A. BOURGOUGNON.
224 pp. 18mo, boards. (_New York, 1897_) _net_ 2 0
=Heat for Engineers.= By C. R. DARLING, 110 illus. 430 pp.
8vo. (_1908_) (FINSBURY TECHNICAL MANUAL) _net_ 12 6
=The Colourist.= A method of determining colour harmony. By
J. A. H. HATT. 2 coloured plates, 80 pp. 8vo. (_New York,
1908_) _net_ 6 6
=Engineering Thermodynamics.= By C. F. HIRSCHFELD. 22 illus.
157 pp. 18mo, boards. (_New York, 1907_) _net_ 2 0
=Experimental Science=: Elementary, Practical and
Experimental Physics. By G. M. HOPKINS. Twenty-third edition,
920 illus. 1100 pp. large 8vo. (_New York, 1902_) _net_ 1 1 0
=Reform in Chemical and Physical Calculations.= By C. J. T.
HANSSEN. Demy 4to. (_1897_) _net_ 6 6
=Introduction to the Study of Colour Phenomena.= By J. W.
LOVIBOND. 10 hand coloured plates, 48 pp. 8vo. (_1905_) _net_ 5 0
=Practical Laws and Data on the Condensation of Steam in
Bare Pipes=; to which is added a Translation of PECLET’S
Theory and Experiments on the Transmission of Heat through
Insulating Materials. By C. P. PAULDING. 184 illus. 102 pp.
demy 8vo. (_New York, 1904_) _net_ 8 6
=The Energy Chart.= Practical application to reciprocating
steam-engines. By Captain H. R. SANKEY. 157 illus. 170 pp.
8vo. (_1907_) _net_ 7 6
PRICE BOOKS.
=Approximate Estimates.= By T. E. COLEMAN. Third edition, 481
pp. oblong 32mo, leather. (_1907_) _net_ 5 0
=Railway Stores Price Book.= By W. O. KEMPTHORNE. 500 pp.
demy 8vo. (_1909_) _net_ 10 6
=Spons’ Engineers’ Price Book.= A Synopsis of Current Prices
and Rates for Engineering Materials and Products. Edited by
T. G. MARLOW. 650 pp. folio. (_1904_) _net_ 7 6
=Spons’ Architects’ and Builders’ Pocket Price-Book=,
Memoranda, Tables and Prices. Edited by CLYDE YOUNG. Revised
by STANFORD M. BROOKS. Illustrated, 552 pp. 16mo, leather
cloth (size 6½ in. by 3¾ in. by ½ in. thick). Issued annually
_net_ 3 0
RAILWAY ENGINEERING.
=Railroad Curves and Earthwork.= By C. F. ALLEN. Third
edition, 4 plates, 198 pp. 12mo, leather, gilt edges. (_New
York, 1903_) _net_ 8 6
=Field and Office Tables=, specially applicable to Railroads.
By C. F. ALLEN. 293 pp. 16mo, leather. (_New York, 1903_)
_net_ 8 6
_The two above combined in one vol. limp leather_ _net_ 12 6
=Up-to-date Air Brake Catechism.= By R. H. BLACKALL.
Eighteenth edit. 5 coloured plates, 96 illus. 305 pp. crown
8vo. (_New York, 1903_) _net_ 8 6
=Simple and Automatic Vacuum Brakes.= By C. BRIGGS, G.N.R. 11
plates, 8vo. (_1892_) 4 0
=Notes on Permanent-way Material=, Plate-laying, and Points
and Crossings. By W. H. COLE. Fifth edition, 32 plates, 176
pp. crown 8vo. (_1905_) _net_ 7 6
=Statistical Tables of the Working of Railways= in various
countries up to the year 1904. By J. D. DIACOMIDIS. Second
edition, 84 pp. small folio, sewed. (_1906_) _net_ 16 0
=Locomotive Breakdowns=, Emergencies and their Remedies. By
GEO. L. FOWLER, M.E. and W. W. WOOD. Fifth edition, 92 illus.
266 pp. 12mo. (_New York, 1908_) _net_ 4 6
=Permanent-Way Diagrams.= By F. H. FRERE. Mounted on linen in
cloth covers. (_1908_) _net_ 3 0
=Formulæ for Railway Crossings and Switches.= By J. GLOVER. 9
illus. 28 pp. royal 32mo. (_1896_) 2 6
=Setting out of Tube Railways.= By G. M. HALDEN. 9 plates, 46
illus. 68 pp. crown 4to. (_1907_) _net_ 10 6
=Railway Engineering, Mechanical and Electrical.= By J. W. C.
HALDANE. 141 illus. 563 pp. 8vo. (_1897_) 15 0
=Tables for setting-out Railway Curves.= By C. P. HOGG. A
series of cards in neat cloth case 4 6
=The Construction of the Modern Locomotive.= By G. HUGHES.
300 illus. 261 pp. 8vo. (_1894_) 9 0
=Practical Hints for Light Railways= at Home and Abroad. By
F. R. JOHNSON. 6 plates, 31 pp. crown 8vo. (_1896_) 2 6
=Handbook on Railway Stores Management.= By W. O. KEMPTHORNE.
268 pp. demy 8vo. (_1907_) _net_ 10 6
=Railway Stores Price Book.= By W. O. KEMPTHORNE. 500 pp.
demy 8vo. (_1909_) _net_ 10 6
=Tables for setting out Curves= for Railways, Roads, Canals,
etc. By A. KENNEDY and R. W. HACKWOOD. 32mo _net_ 2 0
=Railroad Location Surveys and Estimates.= By F. LAVIS. 68
illus. 270 pp. 8vo. (_New York, 1906_) _net_ 12 6
=Tables for Computing the Contents of Earthwork= in the
Cuttings and Embankments of Railways. By W. MACGREGOR. Royal
8vo 6 0
=Bridge and Tunnel Centres.= By J. B. MCMASTERS. Illustrated,
106 pp. 18mo, boards. (_New York, 1893_) _net_ 2 0
=Pioneering.= By F. SHELFORD. Illustrated, 88 pp. crown 8vo.
(_1909_) _net_ 3 0
=Handbook on Railway Surveying= for Students and Junior
Engineers. By B. STEWART. 55 illus. 98 pp. crown 8vo.
(_1909_) _net_ 2 6
=Spiral Tables.= By J. G. SULLIVAN. 47 pp. 12mo, leather.
(_New York, 1908_) _net_ 6 6
=Modern British Locomotives.= By A. T. TAYLOR. 100 diagrams
of principal dimensions, 118 pp. oblong 8vo. (_1907_) _net_ 4 6
=Locomotive Slide Valve Setting.= By C. E. TULLY.
Illustrated, 18mo _net_ 1 0
=The Walschaert Locomotive Valve Gear.= By W. W. WOOD. 4
plates and set of movable cardboard working models of the
valves, 193 pp. crown 8vo. (_New York, 1907_) _net_ 6 6
=The Westinghouse E.T. Air-Brake Instruction Pocket Book.= By
W. W. WOOD. 48 illus. including many coloured plates, 242 pp.
crown 8vo. (_New York, 1909_) _net_ 8 6
SANITATION, PUBLIC HEALTH AND MUNICIPAL ENGINEERING.
=Sewers and Drains for Populous Districts.= By J. W. ADAMS.
Ninth edition, 81 illus. 236 pp. 8vo. (_New York, 1902_)
_net_ 10 6
=Public Abattoirs=, their Planning, Design and Equipment. By
R. S. AYLING. 33 plates, 100 pp. demy 4to. (_1908_) _net_ 8 6
=Sewage Purification.= By E. BAILEY-DENTON. 8 plates, 44 pp.
8vo. (_1896_) 5 0
=Water Supply and Sewerage of Country Mansions= and Estates.
By E. BAILEY-DENTON. 76 pp. crown 8vo. (_1901_) _net_ 2 6
=Sewerage and Sewage Purification.= By M. N. BAKER. Second
edition, 144 pp. 18mo, boards. (_New York, 1905_) _net_ 2 0
=Sewage Irrigation by Farmers.= By R. W. P. BIRCH. 8vo,
sewed. (_1878_) 2 6
=Sanitary House Drainage=, its Principles and Practice. By T.
E. COLEMAN. 98 illus. 206 pp. crown 8vo. (_1896_) 6 0
=Stable Sanitation and Construction.= By T. E. COLEMAN. 183
illus. 226 pp. crown 8vo. (_1897_) 6 0
=Public Institutions=, their Engineering, Sanitary and other
Appliances. By F. COLYER. 231 pp. 8vo. (_1889_) _net_ 2 0
=Discharge of Pipes and Culverts.= By P. M. CROSTHWAITE.
Large folding sheet in case _net_ 2 6
=A Complete and Practical Treatise on Plumbing and
Sanitation: Hot Water Supply, Warming and Ventilation=, Steam
Cooking, Gas, Electric Light, Bells, etc., with a complete
Schedule of Prices of Plumber’s Work. By G. B. DAVIS and F.
DYE. 2 vols. 637 illus. and 21 folding plates, 830 pp. 4to,
cloth. (_1899_) _net_ 1 10 0
=Standard Practical Plumbing.= By P. J. DAVIES.
Vol. I. Fourth edition, 768 illus. 355 pp. royal 8vo.
(_1905_) _net_ 7 6
Vol. II. Second edition, 953 illus. 805 pp. (_1905_)
_net_ 10 6
Vol. III. 313 illus. 204 pp. (_1905_) _net_ 5 0
=Conservancy, or Dry Sanitation versus Water Carriage.= By J.
DONKIN. 7 plates, 33 pp. 8vo, sewed. (_1906_) _net_ 1 0
=House Drainage and Sanitary Plumbing.= By W. P. GERHARD.
Tenth edition, 6 illus. 231 pp. 18mo, boards. (_New York,
1902_) _net_ 2 0
=Engineering Work in Towns and Cities.= By E. MCCULLOCH. 44
illus. 502 pp. crown 8vo. (_New York, 1908_) _net_ 12 6
=The Treatment of Septic Sewage.= By G. W. RAFTER. 137 pp.
18mo, boards. (_New York, 1904_) _net_ 2 0
=Reports and Investigations on Sewer Air= and Sewer
Ventilation. By R. H. REEVES. 8vo, sewed. (_1894_) 1 0
=The Law and Practice of Paving= Private Street Works. By W.
SPINKS. Fourth edition, 256 pp. 8vo. (_1904_) _net_ 12 6
STRUCTURAL DESIGN.
(_See_ BRIDGES AND ROOFS.)
TELEGRAPH CODES.
=Business Telegraphic Code.= 300 pp. narrow 8vo. (Size 4¾ in.
by 7¾ in. and ½ in. thick, and weight 10 oz.) (_New York,
1906_) _net_ 1 10 0
=Miners’ and Smelters’ Code= (formerly issued as the =Master
Telegraph Code=). 448 pp. 8vo, limp leather, weight 14 oz.
(_New York, 1899_) _net_ 2 10 0
=Billionaire Phrase Code=, containing over two million
sentences coded in a single word. 56 pp. 8vo, leather. (_New
York, 1908_) _net_ 6 6
WARMING AND VENTILATION.
=Hot Water Supply.= By F. DYE. Fifth edition, 48 illus. 86
pp. crown 8vo. (_1902_) _net_ 3 0
=A Practical Treatise upon Steam Heating.= By F. DYE. 129
illus. 246 pp. demy 8vo. (_1901_) _net_ 10 0
=Practical Treatise on Warming Buildings by Hot Water.= By F.
DYE. 192 illus. 319 pp. 8vo. cloth. (_1905_) _net_ 8 6
=Charts for Low Pressure Steam Heating.= By J. H. KINEALY.
Small folio. (_New York_) 4 6
=Formulæ and Tables for Heating.= By J. H. KINEALY. 18 illus.
53 pp. 8vo. (_New York, 1899_) 3 6
=Mechanics of Ventilation.= By G. W. RAFTER. Second edition,
18mo, boards. (_New York, 1896_) _net_ 2 0
=Principles of Heating.= By W. G. SNOW. 62 illus. 161 pp.
8vo. (_New York, 1907_) _net_ 8 6
=Furnace Heating.= By W. G. SNOW. 44 illus. 170 pp. 8vo.
(_New York, 1905_) _net_ 6 6
=Ventilation of Buildings.= By W. G. SNOW and T. NOLAN. 83
pp. 18mo, boards. (_New York, 1906_) _net_ 2 0
WATER SUPPLY.
(_See also_ HYDRAULICS.)
=Potable Water and Methods of Testing Impurities.= By M. N.
BAKER. 97 pp. 18mo, boards. (_New York, 1905_) _net_ 2 0
=Manual of Hydrology.= By N. BEARDMORE. New impression, 18
plates, 384 pp. 8vo. (_1906_) _net_ 10 6
=Boiler Waters=, Scale, Corrosion and Fouling. By W. W.
CHRISTIE. 77 illus. 235 pp. 8vo, cloth. (_New York, 1907_)
_net_ 12 6
=Water Softening and Purification.= By H. COLLET. Second
edition, 6 illus. 170 pp. crown 8vo. (_1908_) _net_ 5 0
=Treatise on Water Supply=, Drainage and Sanitary Appliances
of Residences. By F. COLYER. 100 pp. crown 8vo. (_1899_)
_net_ 1 6
=Report on the Investigations into the Purification of the
Ohio River Water= at Louisville, Kentucky. By G. W. FULLER. 8
plates, 4to, cloth. (_New York, 1898_) 2 2 0
=Purification of Public Water Supplies.= By J. W. HILL. 314
pp. 8vo. (_New York, 1898_) 10 6
=Well Boring= for Water, Brine and Oil. By C. ISLER. 90
illus. 8vo, cloth _net_ 10 0
=Method of Measuring Liquids Flowing through Pipes by means
of Meters of Small Calibre.= By Prof. G. LANGE. 1 plate, 16
pp. 8vo, sewed _net_ 0 6
=On Artificial Underground Water.= By G. RICHERT. 16 illus.
33 pp. 8vo, sewed. (_1900_) _net_ 1 6
=Notes on Water Supply= in new Countries. By F. W. STONE. 18
plates, 42 pp. crown 8vo. (_1888_) 5 0
=The Principles of Waterworks Engineering.= By J. H. T.
TUDSBERY and A. W. BRIGHTMORE. Third edition, 13 folding
plates, 130 illus. 447 pp. demy 8vo. (_1905_) _net_ 1 1 0
WORKSHOP PRACTICE.
=A Handbook for Apprenticed Machinists.= By O. J. BEALE.
Second edition, 89 illus., 141 pp. 16mo. (_New York, 1901_)
_net_ 2 6
=Bicycle Repairing.= By S. D. V. BURR. Sixth edition, 200
illus. 208 pp. 8vo. (_New York, 1903_) _net_ 4 6
=Practice of Hand Turning.= By F. CAMPIN. Third edition, 99
illus. 307 pp. crown 8vo. (_1883_) 3 6
=Calculation of Change Wheels for Screw Cutting on Lathes.=
By D. DE VRIES. 46 illus. 83 pp. 8vo. (_1908_) _net_ 3 0
=Boiler Makers’ and Iron Shipbuilders’ Companion.= By J.
FODEN. Fifth edition, 222 pp. fcap. 8vo. (_1900_) 5 0
=French-Polishers’ Manual.= By a French-Polisher. 31 pp.
royal 32mo, sewed. (_1902_) _net_ 0 6
=Art of Copper Smithing.= By J. FULLER. Third edition, 475
illus. 325 pp. royal 8vo. (_New York, 1901_) _net_ 12 6
=Saw Filing and Management of Saws.= By R. GRIMSHAW. New
edition, 81 illus. 16mo. (_New York, 1906_) _net_ 3 6
=Paint and Colour Mixing.= By A. S. JENNINGS. Third edition.
13 coloured plates, 190 pp. 8vo. (_1906_) _net_ 5 0
=The Mechanician=: a Treatise on the Construction and
Manipulation of Tools. By C. KNIGHT. Fifth edition, 96
plates, 397 pp. 4to. (_1897_) 18 0
=Turner’s and Fitter’s Pocket Book.= By J. LA NICCA. 18mo,
sewed 0 6
=Tables for Engineers and Mechanics=, giving the values of
the different trains of wheels required to produce Screws of
any pitch. By LORD LINDSAY. Second edition, royal 8vo, oblong 2 0
=Screw-cutting Tables.= By W. A. MARTIN. Seventh edition,
royal 8vo, oblong 1 0
=Metal Plate Work=, its Patterns and their Geometry, for the
use of Tin, Iron and Zinc Plate Workers. By C. T. MILLIS.
Fourth edition, 280 diagrams, 470 pp. crown 8vo. (_1906_) 9 0
=Engineers’ and General Smiths’ Work.= The smith and
forgeman’s handbook of practical smithing and forging. By T.
MOORE. 401 illus. 248 pp. crown 8vo. (_1906_) _net_ 5 0
=Modern Machine Shop Construction=, equipment and management.
By O. E. PERRIGO. 208 illus. 343 pp. crown 4to. (_New York,
1906_) _net_ 21 0
=Turner’s Handbook on Screw-cutting=, Coning, etc. By W.
PRICE. Fcap. 8vo 1 0
=Introduction to Eccentric Spiral Turning.= By H. C.
ROBINSON. 12 plates, 23 illus. 48 pp. 8vo. (_1906_) _net_ 4 6
=Manual of Instruction in Hard Soldering.= By H. ROWELL.
Fifth edition, 7 illus. 66 pp. crown 8vo. (_New York, 1905_)
_net_ 3 0
=Pocket Book on Boilermaking, Shipbuilding=, and the Steel
and Iron Trades in General. By M. J. SEXTON. Sixth edition,
85 illus. 319 pp. royal 32mo, roan, gilt edges. (_1903_)
_net_ 5 0
=Spons’ Mechanics’ Own Book=: A Manual for Handicraftsmen
and Amateurs. Sixth edition, 1430 illus. 720 pp. demy 8vo.
(_1903_) 6 0
Ditto ditto half morocco 7 6
=Spons’ Workshop Receipts for Manufacturers, Mechanics and
Scientific Amateurs.= New and thoroughly revised edition,
crown 8vo. (_1909_)
Vol. I. Acetylene Lighting _to_ Drying. 223 illus.
532 pp _net_ 3 0
Vol. II. Dyeing _to_ Japanning. 259 illus. 540 pp _net_ 3 0
Vol. III. Jointing Pipes _to_ Pumps. 500 pp _net_ 3 0
Vol. IV. _In the Press._
=Gauges at a Glance.= By T. TAYLOR. Second edition, post 8vo,
oblong, with tape converter. (_1900_) _net_ 5 0
=The Modern Machinist.= By J. T. USHER. Fifth edition. 257
illus. 322 pp. 8vo. (_New York, 1904_) _net_ 10 6
=American Tool Making= and Interchangeable Manufacturing. By
J. W. WOODWORTH. 600 illus. 544 pp. demy 8vo. (_New York,
1905_) _net_ 17 0
USEFUL TABLES.
=Weights and Measurements of Sheet Lead.= By J. ALEXANDER.
32mo, roan _net_ 1 6
=Tables of Parabolic Curves= for the use of Railway Engineers
and others. By G. T. ALLEN. Fcap. 16mo 4 0
=Barlow’s Tables of Squares=, Cubes, Square Roots, Cube Roots
and Reciprocals. Crown 8vo 6 0
=Tables of Squares.= By E. E. BUCHANAN. Ninth edition, 12mo
_net_ 4 6
=Land Area Tables.= By W. CODD. Square 16mo, on a sheet
mounted on linen and bound in cloth 3 6
=Description of the Amsler Planimeter.= By W. CODD. (For use
with “Land Area Tables.”) 12mo, sewed _net_ 0 6
=Tables for Setting out Curves= from 101 to 5000 feet radius.
By H. A. CUTLER and F. J. EDGE. Royal 32mo _net_ 2 6
=Transition Curves.= By W. G. FOX. 18mo, boards. (_New York_)
_net_ 2 0
=Tables of some of the Principal Speeds= occurring in
Mechanical Engineering, expressed in Metres per second. By P.
KEERAYEFF. 18mo, sewed 0 6
=Calculating Scale.= A Substitute for the Slide Rule. By W.
KNOWLES. Crown 8vo, leather _net_ 1 0
=Planimeter Areas.= Multipliers for various scales. By H. B.
MOLESWORTH. Folding sheet in cloth case _net_ 1 0
=Tables of Seamless Copper Tubes.= By I. O’TOOLE. 69 pp.
oblong fcap. 8vo. (_1908_) _net_ 3 6
=Rownson’s Iron Merchants’ Tables= and Memoranda, Weights and
Measures. 86 pp. 32mo, leather 3 6
=Spons’ Tables and Memoranda for Engineers.= By J. T. HURST,
C.E. Twelfth edition, 278 pp. 64mo, roan, gilt edges.
(_1907_) _net_ 1 0
Ditto ditto in celluloid case
_net_ 1 6
=Optical Tables and Data=, for the use of Opticians. By Prof.
S. P. THOMPSON. Second edition, 130 pp. oblong 8vo. (_1907_)
_net_ 6 0
=Traverse Table=, showing Latitudes and Departure for each
Quarter degree of the Quadrant, and for distances from 1 to
100, etc.; 18mo, boards _net_ 2 0
=Fifty-four Hours’ Wages Calculator.= By H. N. WHITELAW.
Second edition, 8vo _net_ 2 6
=Practical Wood Carving.= By C. J. WOODSEND. 108 illus. 86
pp. 8vo. (_New York, 1897_) _net_ 4 6
=Wheel Gearing.= Tables of Pitch Line Diameters, etc. By A.
WILDGOOSE and A. J. ORR. 175 pp. fcap. 32mo. (_1903_) _net_ 2 0
MISCELLANEOUS.
=Time Chart.= The time of day at any place in the World at a
glance. By Dr. F. J. B. CORDIERO. On card _net_ 1 0
=Model Steam Engine Design.= By R. M. DE VIGNIER. 34 illus.
94 pp. crown 8vo, limp. (_New York, 1907_) _net_ 1 6
=Popular Engineering.= By F. DYE. 704 illus. 477 pp. crown
4to. (_1895_) _net_ 5 0
=The Phonograph=, and how to construct it. By W. GILLETT. 6
folding plates, 87 pp. crown 8vo. (_1892_) 5 0
=Particulars of Dry Docks=, Wet Docks, Wharves, etc. on the
River Thames. By C. N. JORDAN. Second edition, 7 coloured
charts, 103 pp. oblong 8vo. (_1904_) _net_ 2 6
=Flight-Velocity.= By A. SAMUELSON. 4 plates, 42 pp. 8vo,
sewed. (_1906_) _net_ 2 0
=Resistance of Air and the Question of Flying.= By A.
SAMUELSON. 23 illus. 36 pp. 8vo, sewed. (_1905_) _net_ 2 0
=Spons’ Engineer’s Diary and Year Book=, issued annually. 4to 3 6
=New Theories in Astronomy.= By W. STIRLING. 335 pp. demy
8vo. (_1906_) _net_ 8 6
=The American Hardware Store.= A Manual of approved methods
of arranging and displaying hardware. By R. R. WILLIAMS. 500
illus. 448 pp. royal 8vo. (_New York, 1896_) _net_ 7 6
=Inventions, How to Protect, Sell and Buy Them.= By F.
WRIGHT. Crown 8vo, limp. (_New York, 1908_) _net_ 1 6
[Illustration]
=SCIENCE ABSTRACTS=
SECTION A.—PHYSICS.
SECTION B.—ENGINEERING.
_ISSUED MONTHLY BY THE_
INSTITUTION OF ELECTRICAL ENGINEERS,
WITH THE CO-OPERATION OF
The Physical Society of London,
The American Physical Society,
The American Institute of Electrical Engineers, and
The American Electro-Chemical Society.
=Section A.—PHYSICS.=
_Annual Subscription_, =18s.= _net, post-free_.
CONTENTS:—General Physics—Light—Heat—Electricity and
Magnetism—Chemical Physics and Electro-Chemistry.
During 1907 and 1908 over 4200 Abstracts and References were
included under the above headings.
=Section B.—ELECTRICAL ENGINEERING.=
_Annual Subscription_, =18s.= _net, post-free_.
CONTENTS:—Steam Plant, Gas and Oil Engines—Industrial
Electro-Chemistry, General Electrical Engineering, and
Properties and Treatment of Materials—Generators, Motors
and Transformers—Electrical Distribution, Traction and
Lighting—Telegraphy and Telephony.
During 1907 and 1908 over 2800 Abstracts and References were
included under the above headings.
_Annual Subscription for Both Sections_, =30s.= _net, post-free_.
=E. & F. N. SPON, Ltd., 57 Haymarket, London, S.W.=
=The Journal of the Iron and Steel Institute.=
Edited by G. C. LLOYD, _Secretary_.
Published Half-yearly, 8vo, cloth, 16_s._
=The Journal of the Institution of Electrical Engineers.=
Edited by P. F. ROWELL, _Secretary_.
=The Proceedings of the Incorporated Association
of Municipal and County Engineers.=
Edited by THOMAS COLE, Assoc. M. Inst. C.E.
Published Annually, 8vo, cloth, 21_s._
=The Transactions of the Institution of Mining and Metallurgy.=
Edited by C. MCDERMID, _Secretary_.
Published Annually, boards, 21_s._ net, or half-bound, 25_s._ net.
=Transactions of the Institution of Gas Engineers.=
Edited by WALTER T. DUNN, _Secretary_.
Published Annually, 8vo, cloth, 10_s._ 6_d._ net.
=Proceedings of the International Association for Testing Materials.=
=E. & F. N. SPON, Ltd., 57 Haymarket, London, S.W.=
LONDON: PRINTED BY WILLIAM CLOWES AND SONS, LIMITED.
Transcriber’s Notes:
In the text version, italics are represented by _underscores_, and bold
and black letter text by =equals= symbols. Superscripts are represented
by ^{} and subscripts by _{}.
Missing or incorrect punctuation has been repaired and inconsistent
spelling and hyphenation have been left.
The following mistakes have been noted:
p. 15. Tranmission has been changed to Transmission.
p. 27. Assuan has been changed to Assuân to match all other instances.
p. 50. urner's has been changed to Turner's after checking the book's
authorship.
End of the Project Gutenberg EBook of A Short List of Scientific Books Sept.
1909, by E. Spon and F. N. Spon
*** END OF THIS PROJECT GUTENBERG EBOOK SCIENTIFIC BOOKS, SEPT. 1909 ***
***** This file should be named 58380-0.txt or 58380-0.zip *****
This and all associated files of various formats will be found in:
http://www.gutenberg.org/5/8/3/8/58380/
Produced by Chris Curnow, Chris Jordan and the Online
Distributed Proofreading Team at
http://www.pgdp.net (This
file was produced from images generously made available
by The Internet Archive)
Updated editions will replace the previous one--the old editions will
be renamed.
Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for the eBooks, unless you receive
specific permission. If you do not charge anything for copies of this
eBook, complying with the rules is very easy. You may use this eBook
for nearly any purpose such as creation of derivative works, reports,
performances and research. They may be modified and printed and given
away--you may do practically ANYTHING in the United States with eBooks
not protected by U.S. copyright law. Redistribution is subject to the
trademark license, especially commercial redistribution.
START: FULL LICENSE
THE FULL PROJECT GUTENBERG LICENSE
PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK
To protect the Project Gutenberg-tm mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase "Project
Gutenberg"), you agree to comply with all the terms of the Full
Project Gutenberg-tm License available with this file or online at
www.gutenberg.org/license.
Section 1. General Terms of Use and Redistributing Project
Gutenberg-tm electronic works
1.A. By reading or using any part of this Project Gutenberg-tm
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg-tm electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg-tm electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the
person or entity to whom you paid the fee as set forth in paragraph
1.E.8.
1.B. "Project Gutenberg" is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg-tm electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg-tm electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg-tm
electronic works. See paragraph 1.E below.
1.C. The Project Gutenberg Literary Archive Foundation ("the
Foundation" or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg-tm electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg-tm mission of promoting
free access to electronic works by freely sharing Project Gutenberg-tm
works in compliance with the terms of this agreement for keeping the
Project Gutenberg-tm name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg-tm License when
you share it without charge with others.
1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg-tm work. The Foundation makes no
representations concerning the copyright status of any work in any
country outside the United States.
1.E. Unless you have removed all references to Project Gutenberg:
1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg-tm License must appear
prominently whenever any copy of a Project Gutenberg-tm work (any work
on which the phrase "Project Gutenberg" appears, or with which the
phrase "Project Gutenberg" is associated) is accessed, displayed,
performed, viewed, copied or distributed:
This eBook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no
restrictions whatsoever. You may copy it, give it away or re-use it
under the terms of the Project Gutenberg License included with this
eBook or online at www.gutenberg.org. If you are not located in the
United States, you'll have to check the laws of the country where you
are located before using this ebook.
1.E.2. If an individual Project Gutenberg-tm electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase "Project
Gutenberg" associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg-tm
trademark as set forth in paragraphs 1.E.8 or 1.E.9.
1.E.3. If an individual Project Gutenberg-tm electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg-tm License for all works
posted with the permission of the copyright holder found at the
beginning of this work.
1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg-tm.
1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg-tm License.
1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg-tm work in a format
other than "Plain Vanilla ASCII" or other format used in the official
version posted on the official Project Gutenberg-tm web site
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original "Plain
Vanilla ASCII" or other form. Any alternate format must include the
full Project Gutenberg-tm License as specified in paragraph 1.E.1.
1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg-tm works
unless you comply with paragraph 1.E.8 or 1.E.9.
1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg-tm electronic works
provided that
* You pay a royalty fee of 20% of the gross profits you derive from
the use of Project Gutenberg-tm works calculated using the method
you already use to calculate your applicable taxes. The fee is owed
to the owner of the Project Gutenberg-tm trademark, but he has
agreed to donate royalties under this paragraph to the Project
Gutenberg Literary Archive Foundation. Royalty payments must be paid
within 60 days following each date on which you prepare (or are
legally required to prepare) your periodic tax returns. Royalty
payments should be clearly marked as such and sent to the Project
Gutenberg Literary Archive Foundation at the address specified in
Section 4, "Information about donations to the Project Gutenberg
Literary Archive Foundation."
* You provide a full refund of any money paid by a user who notifies
you in writing (or by e-mail) within 30 days of receipt that s/he
does not agree to the terms of the full Project Gutenberg-tm
License. You must require such a user to return or destroy all
copies of the works possessed in a physical medium and discontinue
all use of and all access to other copies of Project Gutenberg-tm
works.
* You provide, in accordance with paragraph 1.F.3, a full refund of
any money paid for a work or a replacement copy, if a defect in the
electronic work is discovered and reported to you within 90 days of
receipt of the work.
* You comply with all other terms of this agreement for free
distribution of Project Gutenberg-tm works.
1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg-tm electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from both the Project Gutenberg Literary Archive Foundation and The
Project Gutenberg Trademark LLC, the owner of the Project Gutenberg-tm
trademark. Contact the Foundation as set forth in Section 3 below.
1.F.
1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm
electronic works, and the medium on which they may be stored, may
contain "Defects," such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.
1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right
of Replacement or Refund" described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg-tm trademark, and any other party distributing a Project
Gutenberg-tm electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.
1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.
1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you 'AS-IS', WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.
1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.
1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg-tm electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg-tm
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg-tm work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg-tm work, and (c) any
Defect you cause.
Section 2. Information about the Mission of Project Gutenberg-tm
Project Gutenberg-tm is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.
Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg-tm's
goals and ensuring that the Project Gutenberg-tm collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg-tm and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at
www.gutenberg.org
Section 3. Information about the Project Gutenberg Literary Archive Foundation
The Project Gutenberg Literary Archive Foundation is a non profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation's EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state's laws.
The Foundation's principal office is in Fairbanks, Alaska, with the
mailing address: PO Box 750175, Fairbanks, AK 99775, but its
volunteers and employees are scattered throughout numerous
locations. Its business office is located at 809 North 1500 West, Salt
Lake City, UT 84116, (801) 596-1887. Email contact links and up to
date contact information can be found at the Foundation's web site and
official page at www.gutenberg.org/contact
For additional contact information:
Dr. Gregory B. Newby
Chief Executive and Director
[email protected]
Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation
Project Gutenberg-tm depends upon and cannot survive without wide
spread public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.
The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular
state visit www.gutenberg.org/donate
While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.
International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.
Please check the Project Gutenberg Web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate
Section 5. General Information About Project Gutenberg-tm electronic works.
Professor Michael S. Hart was the originator of the Project
Gutenberg-tm concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg-tm eBooks with only a loose network of
volunteer support.
Project Gutenberg-tm eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.
Most people start at our Web site which has the main PG search
facility: www.gutenberg.org
This Web site includes information about Project Gutenberg-tm,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.
