Thanks for buying Card Reader!

[Overview]
Mobile Stream Card Reader allows to use Palm-powered handhelds as
an ordinary USB/Bluetooth card reader for quick and easy file exchange.

* Great USB transfer speed (up to 1200KB/s for reading
  and up to 1100KB/s for writing on most modern handhelds)
* Background operation support
* Ability to export multiple slots at the same time
* Experimental Bluetooth FTP support
* Small memory footprint (60KB)

Note: background mode support is an EXPERIMENTAL feature.


[Installation]
Any previously installed versions should be removed before
installing the new one.

CardReader.prc has to be installed onto the handheld RAM.
Installation onto SD Card, Memory Stick, Compact Flash card or
internal Hard Drive is not supported.


[Uninstall]
To remove the Card Reader, use the "Delete" menu option of
PalmOS Launcher.


[Checkbox Options]
"Force write protection" - this option, if checked, will export
       the storage card as write protected even if a hardware
       read-only lock is disabled. Cannot be toggled during an
       active USB mass storage session.

"Try to connect on launching" - this option, if checked, will make
       the application attempt to connect to the PC host if the
       handheld is in the USB cradle or mini-USB cable is plugged in.

"Enable power off if no I/O activity" - this HIGHLY EXPERIMENTAL
       option, if checked, will enable automatic power off if there
       is no read/write activity. It might help to prevent battery
       draining after a long copy operation without human control.

"Permit backlight disabling" - this EXPERIMENTAL option, if checked,
       will turn off the display backlight if there is no user
       activity for one minute to save the battery power. This option
       is ignored if Card Reader works in background mode.


[Bluetooth FTP notes]
- Link is authenticated but not encrypted unless the peer requires it
- Only one session is supported at once
- Deleting a folder may fail if it is not empty
- Incomplete file is not deleted if the PUT operation failed


[Supported devices (USB mass storage)]
palm Centro
palm Treo 755p
palm Treo 700p
palm Treo 680
palm T|X
palmOne Treo 650
palmOne Treo 600
palmOne Tungsten|T5
palmOne Tungsten|T3
palmOne Tungsten|T2
palmOne Tungsten|T
palmOne Tungsten|E2
palmOne Tungsten|E
palmOne Tungsten|C
palmOne Zire 72
palmOne Zire 71
palmOne Zire 31
GSL Xplore M28
GSL Xplore M68 (branded as Hagenuk S200)
GSL Xplore M70
GSL Xplore M98
QoolLabs/PiTech Qool QDA-700
Garmin iQue 3600
Garmin iQue 3200
Tapwave Zodiac 1
Tapwave Zodiac 2
Sony CLIE PEG-VZ90
Sony CLIE PEG-UX40
Sony CLIE PEG-UX50
Sony CLIE PEG-TH55
Sony CLIE PEG-NX60
Sony CLIE PEG-NX70
Sony CLIE PEG-NX73
Sony CLIE PEG-NX80
Sony CLIE PEG-NZ90
Sony CLIE PEG-TG50
Sony CLIE PEG-TJ25
Sony CLIE PEG-TJ35
Sony CLIE PEG-TJ27
Sony CLIE PEG-TJ37


[Supported devices (Bluetooth FTP)]
Any PalmOS 5.x device with built-in Bluetooth module.


[What is new in v1.09]
- New option to force write protection;
- Fix for the incomplete folder listing problem in Bluetooth FTP mode;
- Italian and Portuguese translations of the application UI.

[What is new in v1.08]
- Send the correct USB serial number to support several simultaneously
  connected devices;
- Official support for Palm Centro;
- French translation of the application UI.

[What is new in v1.07]
- Preliminary support for the upcoming Palm devices;
- Compatibility fix for TH55 when used with Mac OS X 10.4.10;
- German translation of the application UI.

[What is new in v1.06pl0]
- Support for Treo 755p;
- Per service auto enable setting;
- Show the address of the remote Bluetooth device;
- Fixes in the Bluetooth FTP server code;
- Correctly show the size of the 4GB+ cards (USB mass storage
  protocol code was not affected);
- Spanish and Russian translations for the application UI.

[What is new in v1.06]
- Support for GSL Xplore M70, Palm Tungsten|T and Tungsten|T2;
- New relocatable PNO scheme to avoid the need of the self-allocated
  SHL$$Index value.

[What is new in v1.05pl0]
- Enable the USB mass storage mode automatically only if the cable is
  actually plugged in.

[What is new in v1.05]
- Experimental support for Bluetooth File Transfer Profile;
- Official support for Treo 680;
- Fix for another DMA buffer alignment defect that sometimes caused
  a flaky or slow connection on TH55, UX40/50 and VZ90.
- Fix for a Sony UX40/UX50 hang on a safe disk removal in Windows.

[What is new in v1.04]
- Support for Qool QDA-700.

[What is new in v1.03]
- Official support for GSL Xplore M98;
- Fix for Zodiac incompatibility with Mac OS X.

[What is new in v1.02]
- Fix for the "cannot connect after eject" problem on Mac OS X;
- Workaround for a crash when BackupMan 2.03 is installed;
- Automatic disconnect when the card is "ejected" in Mac OS X.

[What is new in v1.01]
- Support for Treo 700p;
- Minor fix in the OMAP driver.

[What is new in v1.0]
- Support for Xplore M28;
- Fixed a rare crash on Zire 72 and other PXA27x-based devices;
- Fixed a crash with Pocket Tunes;
- Improved stability in the background mode on PalmOS 5.2+ devices.

[What is new in v0.98]
- Exporting multiple slots at once on all supported devices;
- Better transfer speed for Garmin iQue 3600/3200, Tapwave Zodiac;
- Support for Treo 600, GSL Xplore M68;
- Better fault tolerance to card or connection errors on most devices;
- More reliable reading for PXA-based devices;
- Fixed a random lock-up or a crash on connect for TH55, UX40/50, VZ90.


[Support]
Please report any problems/suggestions to [email protected]

You are viewing proxied material from 1436.ninja. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.