Subj : Remote safe reboot
To   : Holger Granholm
From : Herbert Rosenau
Date : Sat Nov 24 2007 01:09 pm

Am 22.11.07 16:27 schrieb Holger Granholm

HG> In a message dated 11-21-07, Herbert Rosenau said to Mike Luther:

HR>>Oh, eCS 1.2R gives you an easy way to migrate from WARP 4.0, 4.5,
HR>> 4.51 or 4.52 to eCS. The only requirements to get it right are:
HG> - - - - - - CUT - - - - - -
HR>>- a system partiton in size of 500 MB or bigger
HG> - - - - - - CUT - - - - - -

HG> Thanks for the information Herbert. My present Warp 4 + FP12
HG> occupies 120 Mb on a 170 Mb partition!

To fix that you would
1. boot from eCS installation CD
2. press Shift+F3 to get commandline window
3. fire up LVM
4. make volumes from the partitons (needed to get the
  existent partitons visible to eCS (this is free of risk)
5. exit lvm with save

6. zip -9rS system c:\*
  same for any other partiton
  zip and unzip are in path here!

  Now you can boot again to your system (nothing chaged yet)
  to burn the the zip's onto CD/DVD

  Thereafter you would reboot to eCS install CD and
  go on commandline window as above

call up LVM again
switch to physical view
remove any partiton as needed to get free space to recreate the new partitios
- system with minimum 500 MB in size
 (better 2GB to get yet the required size for eCS 2.0)
- and to get the partitons you have removed back with reduced size.

There may be no need to remove any partiton, but you have to remove at lest 2
neighbours to get the system partiton big enough. You'simply fill the created
gap in other seizes for the needed partitions.

When you have recreated the needed plain partitons you'll switch LVM back to
logical view and create volumes from existent partiton

- C: should be 'compatible, bootable'
 this is important because this is the only way
 to get the system partiton bootable again
- others: 'compatible'. For now because you in
         prepare state to migrate.

exit LVM with save.

7. format C: /FS=HPFS /L
  comment. /L is needed for savety
  format the other volumes you've recreated
8: restore the data from backup
  That means: exchange the CD to the one youve
  burned with the ZIP file on to one of the
  new formatted ones to be able to replace
  the the CD with the installation CD
c:
unzip x:\path\system

So, your system is back. Do the same as above to restore the data for the other
partitons. before shooting up the zip command you have to change the current
directory to the root you will unzip to.

and you got you old system back without any change - except the partiton sizes.

Optionally you can boot up your old system to test that it works again - but
you can ommit that step and continue directly with the installer. It's your
choice.

--- Sqed/32 1.15/development  28:
* Origin: $home is where .profile is (2:2476/493)